JEEP COMMANDER TRANSMISSION FLUID & FILTER CHANGE

2006 Jeep Commander 4.7L with a leaking transmission gets a new pan gasket and filters.
Astro Pneumatic 12 PC Flex Socket Set 6 Point:
www.ebay.com/i...

[@PatArebalo]

Damn, I don't know how many videos are on KZbin are unclear and scattered. Hard work pays off. After watching this video I can literally do this shit with my eyes closed. Thank you

[@dekrev]

Thanks for the video! Pro tip - leave a couple bolts in when you knock the pan loose and it won’t drop like a rock full of fluid 😈 Just picked up a Commander and I’m pickin through filter and fluid changes - appreciate the tips!

[@chrislutz7557]

This is a great video man. Not a lot of people have these Jeeps anymore, not enough videos on them. In this, I was able to see where the temp sensor is, and that's gonna save me a lotta time.

[@NoWr2Run]

Unless they start putting drain plugs in Trans. pans B.G. NO MATTER WHAT YOU DO IT'S A FREGGIN MESS TAKING THESE PANS DOWN. I had my buddy weld a nut on the outside of my ZJ pan then installed a drain plug. It a lot less of a surprise when u POP THE PAN OFF, HOPE YOUR MIL. RATCHET IS OK. OH SHIT, GREAT VID. AS ALWAYS BRO.

[@CFoles-bh5uu]

Good video man. Well done well narrated and you captured all the details the right way for us. Much respect. Keep making vids!

[@barricadegarage5361]

Corey Foley Thanks

[@NVzla]

One 10 mm bolt holds dipstick tube to transmission. Remove and insert siphon there, allows around 9qts to be removed cleanly.

[@johnm4579]

Looks like alot of work laying under the jeep. I like how you explained thing as you went along. Pay you to do it for me.

[@GrowingUpMurphin]

Just bought a Commander and need to do some fluid changes/tune up - this helped a ton. Thanks, man!

[@shantronbrown2500]

Also just bought a commander.. are you also having acceleration issues ?

[@craigweis1675]

Good job. I would have included the part #s of the filters. And thanx for the tool identifications and quantity of fluid.

[@seanculler5087]

Easiest video I’ve ever watched! Well done!!

[@johnzambrano1759]

Not sure if meant to be funny but you cracked me up on some your narrating. Good video

[@josephkennedy3541]

ty for posting this. I've got the 5.7 hemi 2007 commander. will be replacing trans fluid, filters and shift selenoid next week. awesome vid, bud!!

[@barricadegarage5361]

+JPKLA thanks. I saw the only other video on this job was 3 parts and I tailor my videos to people that want something short, to the point & informational with all fastner sizes listed so you know what your up against. Thanks for the support!

[@josephkennedy3541]

@@barricadegarage5361 yea i just saw the Brunson vid which is good. but yours is far better and hits all the specs. nicely done.

[@michaelbellew2136]

Finally a simple breakdown and walk through video lol. Good job on the video...

[@barricadegarage5361]

Michael Bellew thank you

[@mariotovar6197]

clear step by step process. Thumbs up.

[@tedg3721]

Correction: you have to get a smaller diameter hose to get it in there and siphon out the oil. I was able to use that same exact fluid transfer pump and I put a smaller diameterhose on it and I was able to suck out exactly 4 quarts of oil. I just did this last week as a precursor to me getting ready to drop that pan next week and put an aftermarket replacement pan with a drain plug on it and change the filter But my point is you can get a hose down to get at least four quarts out of there.

[@tedg3721]

Always replaced with an aftermarket pan that has a drain plug on it! It's the best 30-$50 you will spend. That way you can do regular oil changes on that tranny to keep it lasting longer.

[@thehawk5141]

I plan on doing this to my car. Thanks.

[@desiderious1]

Informative and well filmed video.

[@barricadegarage5361]

Thank you

[@KCDups]

Huge help! Literally saving me $100

[@barricadegarage5361]

Kai Dups glad to hear I helped someone out. thanks for watching

[@DanielLopez-dc6lz]

Thanks for the vid, you got straight to the point, will be doing this tomorrow! Thank you!

[@pm1035]

Such a great video. You did a great job Thanks! I’m thinking my 5.7 Hemi will be similar.

[@Waitingonadarkbutterfly]

Nice video. Thanks for sharing the needed tools too!

[@vondellacrawford1405]

Ty for the video, I’m a female I’m thinking about doing this myself cuz. I get a run around about what needs to be done n they charge me a lot so can u include the parts n tools please

[@U5JUSTDONTKNO]

Great job.. this helped alot... that's 5.7 Hemi is my daily driver...of I need to kno anything I'll be look to your vids...hope there's more but hope it's running great at the same time...thanks

[@samueladams2649]

I very seldom comment on your videos but I watch everything you do, maybe a little more input from me is necessary , Good Job Man...

[@tommyt2854]

Well done bud, love the indepthness. But agree with others, part #'s would've been the icing on the cake!

[@ExtremeDailyDrivers]

Sub'd. Fantastic video. I couldn't have done it better myself. Thank you.

[@justScrollin0627]

Great video👍

[@omerooocabrales1801]

That jam tho cheeers fam from Pasadena ca

[@jasonbrown1237]

Very informative thank you for the video

[@barricadegarage5361]

No problem

[@jaykincer7869]

Great video! Thanks for posting.

[@alexf.1518]

Great job very well explained

[@lordspam2721]

I did not see that coming! looking up car vids and clicked on a Barricade vid!

[@barricadegarage5361]

Damn right, I do this!

[@lordspam2721]

@@barricadegarage5361 I wonder if the pan designer that decided on no drain works for WHO! Love your content bud. We need a good laugh and stuff that's more thought provoking these days. Thank you

[@georgec6228]

That drop was painful...never dropped the pan on my commander yet going to tomorrow during service but have dropped the pan and valve body on my 68rfe which removing the rear bolts and letting it drain from the corner has always worked I'm debating on doing this in the storage lot or making my lazy ass clear a spot in the garage on concrete to avoid bagging up soil after a a surprise.

[@jacentyopiela6675]

Good job, Thanks.

[@entitykeeper8869]

Good video

[@cuban420alltime]

good job bro

[@CrazyPalidin57]

Great video, thanks alot.

[@seizethecarp_]

Great, concise video!

[@desiderious1]

Is this Commander 4 wheel or rear wheel drive ?

[@vondellacrawford1405]

Oh can u do a video on other parts like fixing a oil leaks please

[@barricadegarage5361]

vondella crawford This isnt my jeep but next time ill see what I can do

[@robertjones8493]

I have a 2007 Jeep Commander. You mentioned tourq pounds twice. How do you know when you have the proper tourqe? Thanks

[@jct19122]

Thank you for the video. I just got a 2008 Jeep Commander 3.7 6-cylander. I am getting a p0507 code so I will be doing some work. Could you suggest a good set of tools you found helpful in working on yr Jeep. I have some tools but I want to start organizing them by car and in-car specific tools. Thx for the heads up.

[@barricadegarage5361]

I have alot of Jrep videos on my channel and ill often list the tools I use in the video or deacription but working on these vehichles I started out by getting what I needed for specific jobs and built my collection that way

[@pxndxholic]

Nice video,

[@Rome-nr5cj]

I had a question I want to do it on my 2007 Jeep commander 3.7 but I heard if I do it the transmission can over heat and I will have to replace it

[@barricadegarage5361]

You heard wrong. Changing the transmission fluid is just as important as changing the engine oil, you just have to do it less frequently

[@Rome-nr5cj]

Thank you man I was afraid it will happen but nice video now I can do it on mine car

[@rufuswimberly7196]

Good stuff

[@tedg3721]

what a pain in the ass those passenger side bolts are. I'm about to do this on the 5.7 hemi model and I'm wondering if I should try removing the exhaust pipe in the way. otherwise. I gotta buy those quart inch swivel heads you've shown. But thanks for the video sir. keep it up!!

[@concreteman8777]

Good vid 2x4 or 4x4?

[@elvintorres117]

Get you even a decent old 4×4 8 ft, cut it down into about 8 in pieces. Then , use blocks to catch pan so you don't have to dodge man.

[@vondellacrawford1405]

I have a 2006 Jeep commander as well I’m having so much trouble finding someone to fix it so I want to out myself. I’m having trouble with my Jeep it goes into 3 gear when I driving n sometimes it in 3 gear when I put my truck in drive can u please help me out please. I got the oil pan gasket but scared to do it but I will be trying it

[@vondellacrawford1405]

It’s way over n it’s been a while since it’s been done maybe 3 yrs

[@barricadegarage5361]

@@vondellacrawford1405 Get the vehichle up to operating temperature then make sure your on level ground. Put the transmission in neutral then pull the dipstick out, wipe clean then put thr dipstick back in for about 5 seconds then check the level... Doing this any other way can give you inaccurate readings. If its too much then you need to take some out and if its not enough then you need to add fluid but it sounds like you need to service your transmission

[@vondellacrawford1405]

Thx u so Barricade Garage much I’m going to do that

[@chriswalker68]

Is a bolting sequence recommended? Great video by the way!

[@MrCveedub]

Yeah that was my first thought as well, besides chock your rear wheels lol

[@shannoncobble3808]

What makes a 2007 jeep commander go out of gear automatically and then

[@faradhaneef4623]

Hey man what is the torque wrench you’re using. I’m about to do this same repair on my 07 Jeep commander 4.7

[@williamhorsley7799]

But y did u change the fluid ? It looked like new fluid

[@jdeeyes240]

Where can I find a dip stick for the 2006 commander?

[@RonStanek]

I have a 2007 Jeep Commander 3.7 The issue I have is, no dipstick was included, only a twist on cap. I've bought the generic version dipstick and made my estimations for its length. The correct fill point I've seen videos should be a the 70 mark on the dipstick. The issue I have is, when inserting the dipstick it seems to bottom out but with alittle more pushing on it it goes in about another 2-3 inches. Which is the correct length? I've settled for 39 inches but don't know if it's correct? Filled to the 70 mark but seemed to have trans slipping still. Now at 90 mark, no slipping. How long is the dipstick that you have? And I understand that your vehicle is a 4.7 which may be different?

[@02yz250f]

3.7L w the 545RFE is Mopar oem# 53013686AD for the factory trans dipstick!

[@abdelraoufalgrary9898]

thank u man great job , plz what the number or the type of the ATF oil.

[@barricadegarage5361]

Its Mopar ATF+4

[@CheikhFaye-mx7tt]

I am the mechanic and I want to work with you am from Sénégal in west Africa

[@syedsadiq4446]

👌🏻

[@justme8467]

At what mile do u do this ?

[@barricadegarage5361]

Just Me Im not sure but this one was long overdue at 166k miles. I do mine every 30k miles

[@h22eh6]

Damn is this vehicle 2wd or 4wd

[@damon123jones]

how not too😁

[@wiley0714]

It's more important to note that nobody needs you tripping transmission fluid on the street. It's also important to note that you could simply pull a transmission cooling line at the front of the radiator and then just pump out the fluid that way too.

[@uzoechisamuel]

Wrong idea.

[@brushrescue1701]

Nice 💯👌🏻

[@jeffreyjones593]

Great video!!!!

[@rufuswimberly7196]

Good video