Received mine in 2 -3 days thanks, just installed them on my 21 Mojave ,look great
@muhjeepsrock31612 ай бұрын
As an FYI...if you have a rear Anti-Rock, you will need to make modifications. The solid spacers in the mount will need to be milled or replaced in order for the RokBlokz bracket to fit. I measured the difference and used seven 5/17 washers to compensate. Didn't want to destroy the one provided if I ever go back. Additionally, the new support bracket provided will not work. Just have to go with the original bracket set up.
@derrickrees19132 жыл бұрын
Just installed my Black/Orange ones today on my '21 Mojave....you get what you pay for is right!
@Miguelmedina222 жыл бұрын
Just received mine quality looks excellent.
@Kevinstrickland334 жыл бұрын
What do you mean by the textures side?
@hartman49223 жыл бұрын
These flap are killer man! New York winters SUCK but these flap will ease the pain. Great product and very well thought out. I encourage anyone who wants flap for their Gladiator to try these out................G
@Rokblokz3 жыл бұрын
Let us know how they do!
@Baronjvc3 жыл бұрын
Plenty of help here in the video - TIP Much easier to do the rear if you jack up the rear body ... doing that, gave me enough room, so I could avoid taking the tires off.
@KTMcaptain3 жыл бұрын
Watched this 5 times before I looked at the directions to figure out where the mud reinforcements went. Haha
@griffingutierrez32073 жыл бұрын
Concerned the front flaps are only attached to the inner liner plastic and the one bolt to the chassis. Doesn't this seem a. Weak connection? Should I buy longer bolts so the other 2 locations can pass through the tabs behind the mudflap that seem much sturdier? Also, should I use loctite for all the screws when assembling?
@Rokblokz3 жыл бұрын
The front flaps should be installed behind the plastic tabs not just attached to fender liner. The thumb screws supplied are more than long enough for the application.
@coopermillard43783 жыл бұрын
Also, you could put the clips on the plastic tabs instead of the flaps (thumb screw --> liner --> flaps --> tabs --> clips). That would allow you to put the thumb screws in without the flaps - to hold the liners down.
@battleboy213811 ай бұрын
Thank You for the very detailed oriented instructions, made things so much easier, would be nice if they came already put together for how much they cost. thank you
@Rokblokz11 ай бұрын
Glad it was helpful!
@antifederalist223 жыл бұрын
Great instructional. Going to install mine now.
@littlehozer9 ай бұрын
Thanks for the video, i had to do some trimming on back flaps to fit my Max Tow. Great Product.
@hartman49224 жыл бұрын
No hating man.........just goofing. Informative vid, great product............G
@snowlothar452 жыл бұрын
Do these fit with the Diesel version? Exhaust is on the right side.
@guidok37624 жыл бұрын
Great video, super product. Can I order it for shipping toetje Netherlands?
@Rokblokz4 жыл бұрын
Thanks! We should be able to...we ship all over the world. You can email us for more help at rokblokz@gmail.com
@MrHoff443 жыл бұрын
What exactly does that little bracket actually do that you said to leave off?
@JackOSUrulz4 жыл бұрын
Is it just me or are the 5/8 inch screws too small to mount plate C to plate b?
@markc10164 жыл бұрын
I got mine a few days ago. I feel most of the hardware is too short. I got a wrong size nut in my setup and had to leave it out. Quality control is not perfect.
@Kevinstrickland334 жыл бұрын
I think so too, they coulda been a little bit longer atleast.
@JackOSUrulz4 жыл бұрын
I struggled like crazy but eventually it all fit. But forget loctite.
@thatmand45424 жыл бұрын
Man im kinda bummed i was about to buy these for the front of my gladiator and uhhhm welp i just said oof when i saw the price for shipping.....so i didnt buy them :I ,i know its "not yalls fault" but yeah
@trailtothevoid3 жыл бұрын
Just bought front and rear XL/Original ones for my 2021 Gladiator Overland EcoDiesel. Hoping that they come in quick...and don't have any compatibility issues.. (I know sometimes there are some because of different layout underneath... but fingers crossed that there aren't any for these bits.) I'll probably do a video for it as well... (Michigan-based... so weather changes constantly... I'll put them to the test! LOL)
@jesselaporte71842 жыл бұрын
Curious to know how they installed?
@trailtothevoid2 жыл бұрын
@@jesselaporte7184 they installed quite easily. Hardest part was getting under the vehicle.. On non-rubicon ones there was a small piece of rear fender liner that had to get trimmed to fit proper, but other than that I rarely take them off and they do a great job with rocks/mud/snow/etc from hitting the doors and hinges. (The snow in Michigan staying off the doors is a huge benefit alone.. because of the road salt.) I could do a quick review of them on my KZbin channel if it'd interest you.
@jesselaporte71842 жыл бұрын
Thank you for the reply. I ask you specifically as yours is a diesel as well. I ordered a set yesterday and in talks with company now. They said that the don’t work on the diesels because of the exhaust location being different on the eco-diesels as opposed to the gas pots. Thoughts?
@jesselaporte71842 жыл бұрын
And yes, would be interested in seeing a video 100%. Again, thanks for the reply
@trailtothevoid2 жыл бұрын
@@jesselaporte7184 they told me the same. However it clears just fine. I can definitely make a quick video on them, a review after a year of running them. (Give me some time, as I'll have to do it after my vacation next week. )
@joejoethetireman2 жыл бұрын
What do you mean by "textured" side?
@Rokblokz2 жыл бұрын
The side with the etching, sorry our material changed a bit and no longer has the same texture.
@tf68514 жыл бұрын
I'm doing this today, good video and instruction.
@plaquatra6 ай бұрын
These were nice except the cutout isn't big enough. It rubbed the finish off my rock rail and now I have a rust stain that runs down my flap
@david99340Ай бұрын
Can you not cut them out a little more ?
@plaquatraАй бұрын
@david99340 on my 2nd gladiator and 2nd pair. I did take a file and enlarge the hole just a bit. So far it's not rubbing after a few months
@leviolson4 жыл бұрын
I thought RokBloks were WAY over priced... but after watching this install video, it seems you get what you pay for.
@mrmgjohnson2 жыл бұрын
I've owned several sets for different vehicles, they are the best and worth every $$
@canadiangp93663 жыл бұрын
Great looking product and very simple installation. BTW, those Method wheels look amazing, I have the same ones on my Hydro Blue Rubicon. All I have to do is decide on black, red or blue. LOL
@Rokblokz3 жыл бұрын
Thank you! Yeah I love those wheels! We have a gray color that would look sweet on your blue jeep too
@thaas852 жыл бұрын
Do these fit if you have the Mopar side steps for the Jeep Gladiator?
@Rokblokz2 жыл бұрын
They generally do fit, but you will have to create your own cutout in the front flap to account for the step.
@user-il2dr1nh7k Жыл бұрын
الحين انا اركب نفسه
@mcwendel80664 жыл бұрын
What wheels are those?
@Rokblokz4 жыл бұрын
Method 701 in bronze. Those are some of my favorite wheels! Its their new "bead grip" wheel, not a full beadlock but they grip the tire beads harder than a standard rim so you can run really low psi without debeading.
@mcwendel80664 жыл бұрын
Rokblokz awesome thanks! I have your mudflaps on my vw alltrack btw 👌🏼
@glenludwig51356 ай бұрын
Worst instructions ever. Like show which way the nuts go. Show which way everything goes. The video is so far away you can’t see anything. Be a little more detailed. The inner hole on the front. Show how the clip nut is supposed to fit. Nooooo nothing about that. The rear bench prep is garbage showing how the nuts a clip’s direction is supposed to point.
@fletcherbrown7285 ай бұрын
Horrible instruction. Just put the extruded part on the textured side. WHAT the hell is the textured side? How about “the side with the engraved part number or maybe the other side. How ab out telling us if your are working on the right or left rear mud flaps. This is how to make a video of something that should be simple extraordinarily confusing. Everything going back in the box.
@Rokblokz4 ай бұрын
We are sorry for your frustration. There have been changes made to our system and we include PDF instructions to use along side our videos to help with some of the things you need up close.
@hartman49224 жыл бұрын
Go ahead and stop saying go ahead cuz it makes me want to go ahead and go ahead to the next vid.................G