Loved the videos - what kilos were on this engine?
@MountainmanBuildz3 ай бұрын
@@ettiennerossouw3009 thank you. 💪 It's quite high on 317k kms, I hope I can save it to go another 300k kms
@zoltanszocs3371Ай бұрын
Hello! What are the torque specs for the manifold attached to the engine?
@sornewpАй бұрын
What turbo are you useing ? - the one form s320 ?
@JozefKras3 ай бұрын
Also there could be a problem with loose timing chain
@sawekwojcik2483 ай бұрын
A katalizator,DPF,ściąg przewód z odmy na zapalonym silniku ciepłym , wygląda że ma za dużo powietrza a za mało paliwa,pozdrawiam
@JozefKras3 ай бұрын
Can u explain more your Theory about too much air? I am confusing right now. I thik as much as more fresh air I get into engine is better. Offcourse there must be correct mixture but .... Please try to explain it to me. Thank you
@sawekwojcik2483 ай бұрын
No właśnie może mieć nie właściwą mieszankę paliwa,,miałem tak samo raz w samochodzie z silnikiem diesla że tak dymił cały czas,a przyczyną był stary twardy przewód paliwowy który szedł do pompy paliwa i zaciągał powietrze i dymił ale jechał , bardzo długo szukali mechanicy przyczyny i nie znaleźli,dopiero kompresorem dmuchałem i zobaczyłem przyczynę,długo szukałem i znalazłem,pozdrawiam💪💪
@MountainmanBuildz3 ай бұрын
The 2.7CRD didnt come with a DPF in South Africa, but I hear you on the air in the fuel lines, I did replace the soft fuel lines, Can check the Hard fuel line O-rings.
@JozefKras3 ай бұрын
You mean you had a low pressure of fuel on the place - rail ...where should be a much more pressure... I found an air leak on the return line from fuel rail which lets air to the filter on route fuel back to tank so I bought sa filter without hole for one way Valve forbfuel in filter heating and without hole for water in fuel Sensor which i isolate and works
@JozefKras3 ай бұрын
Here in PL and SK Also without dpf
@JozefKras3 ай бұрын
Hi there ... Being waiting forbthis part and now im Also sad for you. Try to use a smoke test for vacuum lines operated turbo ....
@MountainmanBuildz3 ай бұрын
My actuator on the turbo needs to be set as well...