Jeep JK: How To Diagnose the ABS/Traction Light

[@joestallings5480]

i have a 2015 jeep wrangler lights on no cruise control i tried turning my key 3 times and it didnt show anything

[@chadstanford]

Thank YOU!!! Very concise and on the point without all the BS most youtube videos have. very refreshing and informative without wasting time.

[@markstebelton5618]

Thank you. Good video. Washing my jeeps under carriage + around the brakes solved my problem.

[@jeremyeli6793]

Disconnect battery for a bit then plug back in. It'll reset. Then you'll know if it pop's back up somethings wrong really wrong. Happened when I put new wheel bearing on

[@tgrantham22]

Disconnect battery fix it because I just got my front bearing done

[@sidneycoakley1524]

Anyone hill dissent flash when you start the jeep?

[@developmentdivision122]

Sidney Coakley yeah that used to happen when i had this wheel speed sensor problem.

[@shamanosarcasm9800]

I have a 2013 that just started doing that, hill descent comes on, ABS light comes on, Jeep lurches or runs rough. Turn off the hill descent and it drives fine. Use code scanner and its not registering any codes.

[@ericdumas1908]

@@shamanosarcasm9800 did wheel speed sensor replacement fix your problem? I have the exact same thing.

[@shamanosarcasm9800]

@@ericdumas1908 no and yes. Pressure washing the wheel hubs cleared the problem temporarily but it kept coming back intermittently. So I had to have it replaced, $146, parts and labor, left rear wheel. Now it's good to go. Thanks for asking!!

[@acdsully]

Thanks for the information. Now I'll have some knowledge when I take my Patriot in to the dealership tomorrow. This video is saying what a lot of the forums have been saying as well. Again, thanks for the information.

[@Charlie_StCloud]

Thx 4 the info, great video. I have the same problem on my 2016 wrangler, abs/traction light comes on n cruise doesn't work. Weird thing is it only happens in the summer months n never in the cold winter months, that has to be the sensor's.

[@enocmontes4407]

Bro let know if you fix yours cuz mine it’s already getting on my nerves

[@snootdingo9365]

I have a 2006 jeep liberty and am having this EXACT PROBLEM! ABS, Trac control, esp, and NO CRUISE CONTROL! Hopefully your video gives me a better understanding of how to fix it! Thanks for posting!!

[@mindfk394k]

Until I fix my soon What I do is when I get in I pump the brakes first Before I turn the key. Then I start in parking and tap The brakes again.and then it Won't at least give you problems On the road for me..everytime I start the car I do for now..

[@queensapphire7717]

Any electronic related part, I always go OEM (Mopar) or try to find the supplier of the parts, if a 3rd party makes them for Mopar, such as Mahle is a supplier for Jeep thermostat housings (3.6 Pentastar).

[@jpung8803]

Awesome Help!!!!! 2011 Liberty kk. Connected the OBD reader. C1027 Left Rear Wheel Sensor Erratic Performance. $22 Advanced Auto.

[@6912wfd]

J Pung was your 4wd light on also?

[@seanmcelroy15502]

Did you have an engine code as well? Mine isn’t throwing any codes and it just started happening yesterday on the first 90 day of the year

[@mallakiNY]

Turning key three times will ONLY show engine codes (if any)... I have the ABS/Traction lights on and no engine codes so i get the mesage "done" on my dash after turning key three times. OBD2 Code-Scanner also does NOT show any codes for this ABS/Traction lights. Were you able to get any codes displaed for your ABS/Traction lights on?

[@shamanosarcasm9800]

Didn't know about the key-code thing until today but my code scanner was giving me nothing and my 2013 JK has been acting squirrely. Going to try the key thing in the morning then give it a thorough wash and if that doesn't do it, replace the wheel sensors and see if that helps...

[@Msleelee9487]

I just got new tires 3mths ago and end of last month abs and traction light came on how do you figure out which sensor it is there are 2 different types cost me 300 at the dealership last time before new tires and I have a warranty but my deductible is around the same so didn't use it so that sucked I could do it if I had someone to help. is the Jeep dangerous to drive mean time?

[@developmentdivision122]

MsLeelee94 jeep isn’t dangerous. just could get annoying and turn on ABS. if you buy the sensors they are about 30$ a piece from quadratec.com or amazon or whatever. So all four for like $120-$150 bucks. But if you just need two then it’ll be around 50-70$

[@wanderingelkless]

Ok ... me again. After all that the Jeep has been thru. About 3 weeks ago I had to have the radiator replaced that was just replaced months ago. Plus the #5 spark plug and coil to be finished off with replacing the power control module. I was going to pass on it but asked what purpose did it serve? I was told it was the Brain of the Jeep. Hmmm, they said it was covered under the powertrain warranty. Not by much but for that I am grateful. Signing off from me and my disposable Jeep. I hope no one else has been thru this and I have a feeling it's not over with. Enjoy yours though. 😊

[@developmentdivision122]

wanderingelkless unlucky man. I’m sorry you had to go through that! hopefully it hasn’t turned you completely off the brand.

[@markwilliams1215]

I just had the sway light and check engine light and cruise control stop working found out it was a bad break switch on the brake pedal,

[@developmentdivision122]

Mark Williams oh wow. I guess it could be that too. These computerized cars are complicated. Electrical gremlins are the worst (right behind seized nuts and bolts!)

[@damianreed1990]

Great video, well done. When my 2006 Jeep goes into that mode, it will begin with a horrible finding noise like it wants to go into 4 wheel drive, but can't. After a while of hobbling around on the road it straightens out, all those lights come on and it rides normal. I park the car for a time and the lights are off.... until the next time. What causes the grinding?

[@uiopqwerty4151]

I had the same problem with my jk, mainly when the left front wheel suddenly died suddenly during normal driving, the skid started to flicker, and the vehicle always made noise when it started, my mechanic told me that the noise was when the abs pump started , and I need to replace the sensor of the left front wheel, the abs master cylinder may also need to be replaced

[@SybilDefense]

Thanks and perfect. I was hoping it was a fuse

[@yasha24x]

I got a 2012 jeep patriot latitude with the speed wheel sensor light on. Sometimes it turns off but now it mostly stays on. I'll definitely try to replace them. Thank you very much for this info👏🏻👏🏻

[@daddyolepore]

I have a jeep patriot with the same problem and the problem is ABS module needs to be replaced

[@jeeplover2004]

Last night I replaced my e brake drum brakes on my 07 wrangler and I got 3 lights that wont go away ..the abs and the traction control but also the esp bas light any ideas...I tried unhooking the battery

[@3rdeyekid]

My 2016 Jeep Patriot reads "d0n3" which obviously means "done". Does this mean there actually isn't an issue and these lights are coming on for nothing?

[@julianv3978]

buccees hat is fire

[@developmentdivision122]

my g

[@carlosm6608]

Hi, i have a 17 jk with 18k miles on it, and it just started doing the same thing but only when the car has been unused for hours and as soon as i turn it on and move a bit, it makes this rough sound as if one of the wheels was stuck, would lose power too for a few secs then , everything goes back to normal after abs and trac lights pop up, and after a minute of driving the lights just desappear

[@developmentdivision122]

Carlos M yeah you have a bad wheel speed sensor. Try to figure out which wheel feels like it’s stuck, that corner is the corner w the bad sensor.

[@carlosm6608]

thank you

[@ebeltranhc]

Hey please get back to me but same thing happens on my jeep wrangler. Feels like brakes are stuck then abs and trac light shows on then i drive and goes away. But only happens when i let the car sit for a few hours then if i drive again it happens.

[@offtherecord912]

same thing is happening to me. lights come on and off again periodically. the brake pedal is starting to feel like the parking brake is enabled and causes it to shake and jump. my pads are good and I'm not sure what the hell is going on. took in for an oil change about a month ago and now this shit. I'm skeptical about most mechanics.

[@jean-philippecloutier5851]

Will it be Front if cruise controle still working?

[@vinniegunns3293]

Speed sensor warranty was extended to 15 years and unlimited miles. Also traction control pops on me after a day of bar wheeling. Usually straightening the steering wheel fixes it

[@developmentdivision122]

Vinnie Gunns Awesome! And I think the traction control button on my jeep is broken, whenever I press it nothing happens. The other switches on the switch panel work, but only the traction control one doesn't work. Not sure what the problem is yet

[@vinniegunns3293]

Chris Meacham check your connection from the garage door mod

[@developmentdivision122]

Vinnie Gunns yeah, gonna diagnose tomorrow when I'm out adding some new mods. Thanks !

[@wanderingelkless]

Vinnie Gunns when did the extended warranty go into effect? I just had one replaced not long ago and they charged me a lot for it.

[@jimhovater8755]

I replaced front track bar in my 2012 Wrangler. Steering wheel wasn't straight afterwards (fixed that with allignment), BUT traction light came on, and cruise control doesn't work. HELP!

[@FORTMOUD]

Chris an idea I got from another video was as you point out take the wheel,then the sensor head closed to wheel and clean it from the debris then thru the hole can clean the dust by apply air pressure on the ring and I believe can be used WD 40 as well.

[@thatcoffeefella]

I did tire rotation alignment and balancing and it sorted it out

[@liaodesign]

Good info because I think my alignment is off so it might be the problem thanks

[@alikakalanihuia8891]

When your ABS and Traction Control lights came on, did your Jeep handle differently or show any detectable signs that something wasn't right?

[@developmentdivision122]

Alika Kalanihuia well when I would turn, the jeep would enable abs, so some wheels would apply the brakes and the brake pedal felt like abs was enabled.

[@jjojawn2922]

My mechanic put new rear brakes on, I immediately had my emergency brake not work (took it back for them to fix) now my ABS won’t shut off. Is this his problem too?

[@developmentdivision122]

TJ F possibly. Check your wheel speed sensors

[@allMala]

could aftermarket wheel spacers be causing the trac. control/abs light to come on?

[@SybilDefense]

Bigger tires may cause speedier wear. One video showed how the axle seal wore a ring on the axle and the grease leaked chronically causing repeated failure.

[@zweirdz7706]

I was driving my Jeep and my there was a slight grind when I accelerated. The ABS and traction light turned on, is there something wrong with the motor?

[@developmentdivision122]

wOw sounds like you have a wheel speed sensor issue. Not a motor problem

[@joshhobday3123]

Did yours feel like it was almost limping?

[@dmacko]

I know this is an old vid but after I replaced my brakes and rotors, I'm having this issue. However, ABS and traction control lights only come on when I start the jeep. Once I start driving, the lights turn off. No idea if it's the WSS or not

[@developmentdivision122]

David Macko wheel speed sensor

[@Felipereb]

hello Cris! I have a JKU 2015 and I had this problem too. Turning the key three times appears “done”, no code is displayed. I washed the car and nothing changed. Do you have any suggestions of what it might be?

[@Seshwitthjess]

Did you ever figure it put??

[@martinyohn1008]

Great video, very helpful. Got me on the right track ,Thanks!

[@Resist4]

My 2015 JKU just threw the ABS and Traction Control warning lights. I tried the key cycling method and after it showed done without giving any codes. Also used a ScanGauge ll and it didn't show any codes. Now what? My Jeep isn't dirty and the brakes are good.

[@developmentdivision122]

Replace Wheel speed sensors

[@Resist4]

@@developmentdivision122 but as I said it's not showing codes for the speed sensors, which it would have.

[@Resist4]

So after further digging I've found out that the key cycling thing won't show ABS codes at all. It can show other codes, just not ABS codes.

[@johnt8757]

Thanks for this video. I will try the steps and see how it goes. 😎👍

[@pharmacells]

One small thing to add. I have a Patriot for running my dog to and from the park and the ABS light came on. Turned out it was because the front tyres where mis-matched as the car had 3 winter Goodyears and one summer tyre after the previous owner had a puncture. I replaced it with the matching winter tyre and that solved the problem. The car was registering the slight variance and throwing the light.

[@jamesparr4331]

Was the traction control lights on

[@kanewilliamson]

I have an issue with the car that is throwing C2200 ABS internal control Module code. I have a OBD2 scanner that is a Bluedriver and a Superchip flashpak, I am not getting any other codes The cruise control works, and the ABS lights only come on when you drive faster than 20kmh. I took it into the mechanic for a service as I don't have time to do it myself at the moment, and I though his diagnostic might pick up a wheels sensor issues, he said the wheel speed sensors are working fine and it is an ABS module issue. if you clear the code it doesn't show up again until you drive over 20kmh. any ideas?

[@JohnnyGarton]

Are you really asking this kid for advice in diagnosing your problem, lol.

[@sceti118]

So my jeep Liberty is stuck in 4 wheel drive constantly and the traction control wont turn on. Whenever I try to put in in 2 wheel drive, the 4WD light and the Traction Control Off like start flashing very quickly. It also says ESC Off and it also starts flashing whenever I try to put in 2WD. Any advice?

[@gregurquhart1458]

Question, exactly what/how to “cycle ignition”

[@developmentdivision122]

Greg Urquhart turn the key from the off position to the run position 3 times. Run position is the stopping point right before the ignition position. Off is as far back as you can turn it twords you.

[@braceyourselvesfortruth2492]

@@developmentdivision122 so basically you are taking it through 2 hard positions? I tried this and couldn't get it to work. Dunno if I'm going fast enough. Took it to my mechanic and said it was right rear sensor.

[@dianataylor2124]

Excellent video. Honestly just had a jeep friend ask about this problem

[@06rafaelespinoza]

Cycling didn’t work on my jeep

[@omarbaez6963]

i tried cycling the key 3 times as you said but no code pops up and i still have the abs and traction control lights on what could it mean?

[@developmentdivision122]

omar baez a bad wheel speed sensor. sometimes the code doesn’t come up.

[@JESUSD6765]

Yeah my clients car does the same

[@joyrichard1958]

Could the lights be on Bc of bad sway bars. My jeeps lights came on recently but idk if it's Bc of the sway bar needing to be replaced.

[@developmentdivision122]

Joy Richard highly unlikely it’s cause of the sway bars.

[@joyrichard1958]

Chris Meacham I found out it was my sensors that were broken causing the lights to come on. Thank you getting them fixed this week thanks for such a great video

[@vigunfighter]

Thanks, useful info! I don't mind that the lights are on, but I do mind that the ABS and trac control aren't working. Was driving down a steep and curvy road in heavy rain today and the front wheels locked up in the beginning of a turn. Luckily I'm old enough that I learned to drive on cars before ABS and traction control were available and was able to react quickly, getting off the brakes enough for the wheels to roll again so I could steer...

[@developmentdivision122]

Peter Charles glad you are okay! but yes this is important to fix for a reason like that. Or just take out the ABS completely

[@offtherecord912]

my 2016 compass began locking up. brake pedal started jumping and vibrating, pretty bad. only 35k miles. I'll have to take it to a shop, but figured I'd check around to see if there is anything I could do myself. pretty upset about it.

[@etrevino78]

The key trick will show ABS codes as well? I thought it would only show "p" codes.

[@6912wfd]

EzDuzIt it didn’t on mine. No code came up but lights are still on

[@kernow9324]

Great video. Thank you! My Patriot is already booked to be taken back to the garage that sold it to me, but at least I now have some idea of what might be wrong, as all the symptoms are there!

[@foxfirephoenix1480]

My Patriot is ONLY showing Traction Control light constantly. No ABS light or anything else. What can be causing this?

[@barbaramedina-hernandez9947]

Foxfire Phoenix did you ever find the issue ? Mine does the same thing.

[@foxfirephoenix1480]

@@barbaramedina-hernandez9947 I replaced the brake light switch under the dash. It seems to have worked.

[@clos1764]

I tried #3 to find out right side or left side sensors. I turned the Jeep on and off at least 4 times I did not see anything on my dash. Any suggestions or am I doing it wrong? Thanks again.

[@developmentdivision122]

kzbin.info/www/bejne/p3bHoKKMZr2fn6s watch this and videos like it to see if you're doing the process right

[@clos1764]

Chris Meacham I was doing it wrong! Thanks for the link. I will try it again.

[@jojy492007]

I have 2013 Laredo, the ESC light turned on every morning without selecting the button , I have to start the engine for few minutes and turn it off and start the engine again and things go back normal, I have checked everything by the computer and there was no error?? any help please?

[@developmentdivision122]

jojy492007 probably a wheel speed sensor. try googling on the online forums

[@Jekeeiitwkrkemdmkrrkrkrk]

Thats gonna make my wrangler burnout if i take it out?????

[@craigb.golden6494]

Nice Bucees hat!

[@developmentdivision122]

Craig B. Golden my g

[@craigb.golden6494]

@@developmentdivision122 I'm not sure where you stay, but the Bucees corporate office is only about 200 yards from my back yard. I live in Lake Jackson, we have Bucces on almost every corner, lol. We love our Bucces (our kids are ruined to nice gas stations), and I like when we are headed out of town, and stop at one of the big Bucces, to see all the people seeing this place for the first time! It's pretty cool, I want to tell them that I stop at the first Bucces ever built almost every day! It's much smaller, but still have nice restrooms. Anyway keep rocking on with the vids brother! And keep Jeepin on!

[@mattjax1330]

Love this channel now

[@veesoho93]

Cool video thank you so much

[@anthonybenavides720]

The ABS codes don’t show with the key method. You gotta get diagnostics done.

[@rebekahnoble4275]

Awesome video! May just have saved me a bundle!

[@proggy714]

Good work!! Thanks Buddy!! Solid info!!

[@jeremycurtis529]

Ive got a 2012 Jeep Wrangler Sport i got the oil changed yesterday, drove it a few miles home then while i was driving it today it felt like the brakes were bieng applied then all of a sudden i lost all power, press the accelerator and nothing for a few seconds. I got power again but now my ABS and ECT lights are stuck on. Thanks for this video i tried to run the codes the way you explained and it worked but no codes popped up. When you had the issue with your jeep did you have codes pop up? Do you still think it could be a wheel speed sensor even though no codes popped up? Any help would be very much appreciated. Thanks

[@developmentdivision122]

Jeremy Curtis i would pull off the wheels and check the brakes to see if they are stuck or anything. And yes a code popped up on my jeep, i replaced the sensor and now everything works fine! If nothing is wrong, no codes should pop up.

[@jeremycurtis529]

Ok thanks i will try that. I was actually hoping a code would pop up so i know what to fix. Thanks for your response.

[@Stanseng]

I'm at the dealership for this issue right now and they are trying to charge me $100 for the sensor and $219 for labor. Is this right? Thanks for the reply!

[@developmentdivision122]

Stan Seng it sounds about right (classic expensive dealership). But if you want to save some cash, I would do the work yourself. The sensors are about 25$ a piece and you can do this repair in a few hours.

[@jeremycurtis529]

I had to replace the sensor and with labor at the dealer it was $275

[@olddognewtricks4804]

Does the ignition key procedure work on a JK 2007? Thanks,

[@developmentdivision122]

Yes it should

[@rebekahlenox1537]

my 2012 just has the traction control light on. the abs is not on. could this be speed sensor?

[@developmentdivision122]

Brad Hill i am not sure. it could be, but it couldn’t. I would try to read the obd2 codes and see if it throws any codes. i have not mastered the electrical and computer of the jk yet. Sorry if this was no help. But goodluck.

[@TheVak3ro]

Brad Hill hi I have the same problem in my jeep wrangrer unlimited sport, only the light traction contron on. how did you fix it??

[@rebekahlenox1537]

TheVak3ro I haven't yet. I believe it is the brake light switch but haven't gotten the chance to switch them out. Someone else said to check battery connection. Their battery connection was loose and it fixed their problem. Mine were not loose.

[@rebekahlenox1537]

I changed the stop light switch on my jeep yesterday and so far, the traction control light has not come on. it was a little hard to do just because of location and trying to get under the dash but it was only a $12 part at OReilleys.

[@TheOhzoneLayer]

Ooh 500 subs! Congratulations! I'm expecting a vid for that. Maybe a prank on your brother??

[@johnnyverano1373]

Thanks bro. good advise.

[@wanderingelkless]

So ... I'm driving a 2013 Jeep Wrangler. not even a week or 200 miles ago I had new rear brake pads and rotors put on. At 50k miles, I can see replacing pads but rotors ... really?! So after the brakes were done and 200 ' miles later ....I just got home from the dealership to replace the left rear wheel sensor. So you say you take off the tire and the rotor to get to this part. Am I crazy to think the mechanic caused it? I also had to replace the radiator at 48k miles. When they say they do the 24 point check ups do they actually top off the fluids? My first thought is I am driving a disposable vehicle?! Thanks for letting me vent. Oh and thanks for this video! I realize I'm not alone in this and too late on the don't let anyone else do the repair ... UGH! Oh and the ABS and traction lights both came and stayed on. When I tried to accelerate it felt like the left rear brake was engaged. Like the other 3 wheels wanted to go but the one did not. Jeep is always clean. Unless it happened at the car wash. Enough 🤔 for now.

[@developmentdivision122]

wanderingelkless yeah the one wheel braking is a classic example of a bad wheel speed sensor. AND YUP, that is exactly why I do my own work on my jeep, i refuse to get played by mechanics.

[@BigWaveDaveO]

if you have a manual the parking break is a joke. Then watch what coolant you put in the jeep. It takes special OAT and most places will just put in regular coolant and it will cause gelling of the coolant and could cause the radiator issue. I would check water pump to make sure this is not an issue.

[@wanderingelkless]

olson795 thanks for your input. I got the Jeep from my brother. He along with my dad are two avid and devoted Dodge fans. They do all of their Dodge repairs. That's how they get them to last so long. Unless my mechanic (brother) is available... I take it to a Dodge dealership. And yes, they both hate it when I have to. So to make a long story longer. Unless the dealership puts in non compliant radiator fluid ... I don't know what else it could be other than they don't top it off. Because I only put in the premixed from the Dodge dealer specifically for the Jeep. Is it reasonable to assume the radiator would have to be changed out at 48k miles to be normal? Humor me ... I didn't just get my driver's license yesterday. I miss my Toyota.

[@jenniferacker384]

I've changed hundreds of these sensors on JKs. There is no reason to remove the wheels to change these, let alone taking the brakes apart.

[@wanderingelkless]

Jennifer Acker wow that's awesome. I'm not surprised though. They want you to think it's labor intensive ... crooks!

[@kdogg23]

I have 2016 JK. Having same issue: ABS and traction control lights are on. l cycled the key 3 times. No codes. Pretty sure l did it correctly bc l see the dashes and then it says done. Any suggestions? Haven’t been off-roading. Car is clean.

[@developmentdivision122]

kdogg23 that’s strange. If a part was defective, then it would tell you if codes were thrown. You might have to do the daunting task of taking it to the dealership :(. Check the fuses! As well as give the brakes a good look over.

[@kdogg23]

Chris Meacham thanks for the reply. Going to take it autozone first and see if the computer shows anything.

[@robhayward8138]

@@kdogg23 did you get a fix on this. I am having the same problem

[@kdogg23]

rob hayward Yes! It turns out that the knuckleheads that rotated my tires, used the spare in the rotation but did not swap out the sensor. So my rear passenger tire didn’t have a sensor but my spare tire in the back did. Once the sensors were swapped. The light went away

[@robhayward8138]

@@kdogg23 aghh that makes sense.. although havent had tires rotated in 8 or so months. Did it happen over time or straight after tire rotation. The whole no diagnostic code is whats confusing me

[@gloucesterdavid]

O'Reilly auto told me they couldn't read the code on my 17 JKU because it wasn't a CEL.

[@mlinsner98]

My lights were on and it was transfer case switch.

[@ryandordevski9260]

Matthew Linsner what codes did you have in relation to your switch problem?

[@joshuasimon7633]

What if there are no codes and the jeep is spotless?

[@joshuasimon7633]

I put it in 4 low yesterday just to test it out and both the lights came on. I checked the codes and there were none, it just said d0ne.

[@developmentdivision122]

Joshua Simon 4 low turns off all ESP and the lights will come on.

[@Tweaks6.7]

Joshua Simon did you find the issue?

[@BigWaveDaveO]

Thanks, this just happened tonight and I thought It was a break/wheel speed issue. Had a stuck parking break since wheeling and the code started.

[@chantaygriffin8954]

..

[@ryandordevski9260]

How did u find out if your parking brake is stuck?

[@MissionsOffroad]

Watching this as my Jeep is going for thorough wash in a moment and 20,000 km service tomorrow 😁

[@benplunkett2983]

What about error code U1412 being thrown?

[@developmentdivision122]

Ben Plunkett read this: www.jk-forum.com/forums/stock-jk-tech-12/new-jk-throwing-codes-175428/

[@radicalttc]

Good info. Thanks

[@alexfotia9389]

good video. my wrangler unlimited JK has this same problem. traction control and abs lights on randomly. dealership tested all sensors and none were bad. it was to the dealer 3 times and the problem has not been fixed. I just thought of these questions though after reading some comments here... the bf goodrich all terrain mud tires on mine are extremely cupped and worn out randomly on the tread( i did not properly rotate these tires when new. they now have 24K miles on them (mostly pavement miles) and while driving the road noise from the tires is annoying as ever so I know they are bad. don't have the money to replace the tires just yet. but finally my questions...could these worn tires cause my traction control and abs lights to come on ? has anyone heard of new tires eliminating this problem ?

[@developmentdivision122]

Alex F i don’t think worn tires could cause this problem. The wires would have to be really bad... theoretically the tires would have to be all different circumferences to cause a problem with the wheel speed sensors. Not a bad idea to replace bad tires though. Tires are a very important piece of equipment.

[@alexfotia9389]

Thanks for the reply. A few more weeks and I'll have enough saved for new tires.

[@johnday8603]

Rotate your tires and they will even out in a few thousand miles or so...

[@Delfi1900]

Great videos👍🏼👍🏼 thanks

[@hugoavalos6402]

Great video

[@developmentdivision122]

Hugo Boss thanks!

[@marg4229]

2012 Jeep Compass all warning lights flashing and car sometimes went to limp mode (press on gas and car drives slowly without much power) after starting. Looked like some sensors were malfunctioning. Found out needed new vehicle battery (was 7 years old). Replaced battery but not all warning lights went off. Got mechanic to try to reset with his gadget, but lights went back on after I left shop. Drove that way for weeks because it was only warning lights, not a mechanical problem. Didn't have time to go back to mechanic and he never charged me anyway, so was going to make an appointment. Sat in car at home while on but parked and in frustration pulled up on the emergency brake lever firmly, lowered it, and pressed emergency brake button 3 times quickly. ABS and traction warning lights went off and have stayed that way. Car is good as new again with only a battery change and a mini temper tantrum.

[@amberwilson988]

Thank you. I’ve been having this issue with my liberty.

[@developmentdivision122]

Pink Freckles glad i could help

[@6912wfd]

Amber Wilson it’s a common issue with our libs. Ugh lol

[@henrycolestage7650]

Buc-EE’s!

[@developmentdivision122]

Henry Cole Stage yuh

[@johns4844]

Thanks for the info bud

[@m.a.r.k3136]

Your video is amazing..

[@rickhall8279]

thanks for this.

[@PhonesOnaDailyBasis]

1:05

[@Michael_00001]

You don't have to take off the wheels or the rotors to replace those things. I had lights come on and just did all 4. Fuck it. It's just a plug and a bolt for each.

[@developmentdivision122]

...but the wheel speed sensor is inside the hub... i dont know how you reached them without taking off the rotors.. I have a video replacing them. kzbin.info/www/bejne/b2rXpWehds-Ff8k

[@Michael_00001]

I was talking the rears. The fronts, yes, there's no way around it. Sorry I should have clarified.

[@cashhinkle2906]

I have the same damn problem

[@216sanchezb]

Thanks 🙏

[@anavas7684]

What my wife heard was left side right side wash your car back 2 square 1 🙃

[@samb378]

Thank you

[@nader6352]

That was super informative man. Right on. And take that hat off. You got good hair. You'll go bald

[@mikechase6738]

to avoid these problems, stay away from jeep products!! They all have these issues....it starts costing $$$$

[@hectormejia5090]

My parents have bought two jeeps and they both have these issues🙄

[@braceyourselvesfortruth2492]

you deserve the award for least helpful comment of all time.

[@hernawanming2575]

NATO = No Action Talk Only

[@marcgonzalez9972]

Can’t stop staring at his big nose lmfaooooo

[@bahrudindinho3965]

Ngomong Mulu g d ksh tau cara nya

[@jacitucci]

How do you cycle the key 3x?

[@SybilDefense]

Turn it on/off (without starting the vehicle) 3x's within a second or two of each turn, ending up in the on (acc) position). Crazy how these secrets tricks are embedded in our vehicles, like connecting and disconnecting the seat belt 3 times to turn of the unbuckled beeping (I think)