JEEP LIBERTY OME 3 INCH LIFT KIT HOW TO

[@shawnbuckendahl1968]

Looks good. You could get sway bar quick disconnects and put on there. That way you can hook them up and disconnect the sway bar in minutes.

[@toddclyne3493]

Definitely an option if I think I need it.

[@flamemorx]

exciting stuff going on here

[@toddclyne3493]

Thanks

[@jeremymullen5378]

🔥jeep looks great.. that front bumper is killer 🔥👊🔥

[@toddclyne3493]

Thanks I built the bumper a couple years ago

[@zeez1705]

@@toddclyne3493it is so nice

[@ericsandoval3436]

Dont forget to add a bumpstop to your rear suspension, to prevent those bigger tires from rubbing the wheel well during full flex! I used two hocky pucks, bolted to the bottom soring seat in my 2002 KJ, but i feel like i actually need to add another ine to the stack!

[@toddclyne3493]

@@ericsandoval3436 I'll keep it in mind but gosh I have had zero issues so far. I have had it on the most gnarly tails around our cabin.

[@ericsandoval3436]

@@toddclyne3493 good to hear! Your build looks great! 👍

[@ryanbean5959]

Hello, could you please explain how u got the rear spring started onto top isolator, I'm literally in middle of lift install and having a heck of time getting rear spring seated on top isolator. Any help would be greatly appreciated.

[@toddclyne3493]

@@ryanbean5959 you gotta take the suspension top link off unfortunately and the shocks out

[@mckesson22]

Anyone have issues reconnecting the sway links with that2.5 in lift? Mine sit at a weird angle and pinch the bushings after torquing down.

[@Nathan-s9w8t]

For the rear shock what year was it

[@toddclyne3493]

@@Nathan-s9w8t Durango. They only made them a couple years they are all the same

[@MacsSpecialitiesProperties]

Great video! Did you hook up the sway bar again? I just bought some TJ springs for the rear of my KJ, did you have to trim the springs to make them work?

[@toddclyne3493]

@@MacsSpecialitiesProperties no and no. We primarily drive it up north on back roads and some highways. It's a little loose in tight corners but you get used to it.

[@MacsSpecialitiesMotorsports]

Nice 👍

[@accountsreceivable6948]

Those are not rear TJ springs. The sticker number he put on the video cross references to JK. I used JKU rear springs in my rear to get my 3” plus the rear. 68004459aa. Are better than the 68004458aa.

[@toddclyne3493]

@@MacsSpecialitiesProperties I didn't hook it back up. Mainly country road driving with some highways. Not really a big deal. No trimming

[@toddclyne3493]

@@accountsreceivable6948 thanks for posting this and correcting me.

[@patbarch8278]

I always ran old man emu suspension systems on my jeeps, and my landcruisers…

[@toddclyne3493]

They seem to be good suspension

[@nydawgpack1278]

What year are the Rear parts or dose it not matter

[@toddclyne3493]

Doesn't matter from what I know.

[@craiggowsell8798]

Sweet Jeep Todd! Nice to see your occupied with a different project seeing how shitty this winter was (at least here in Canada anyways). I think it’s probably the same for you guys too based on a lot of your videos this winter. Keep that shirt inside out! 😂 cheers 🍻

[@toddclyne3493]

Always inside out 😆😆. Yes zero snow for us this winter

[@craiggowsell8798]

@@toddclyne3493 I’m Sorry I’m such a prick Todd I won’t ever let that go but it’s so awesome too at the same time I mean nothing bad by it. Just glad that I’m not the only one that has done that. I’m a nursing attendant by trade I wore my scrub shirt inside out once it wasn’t till I was like halfway through my shift I actually had a patient notice that lol.

[@toddclyne3493]

@@craiggowsell8798 I love the saying 😁

[@thaddaeusjohn]

Do you have any more info on doing the rear lift? Like does it matter what year TJ or Durango for those parts? I need to do that to mine and I'm looking for ideas. I like what you did there, might do that on mine.

[@toddclyne3493]

I'm sorry I don't

[@cdjdaniel8860]

Entonses los resortes traseros son de tj y amortiguadores de dodge durango? Que año ?

[@robertoferrari5397]

Oooo ahhhh.....ps,..what kind of front bumper is on that?

[@toddclyne3493]

@@robertoferrari5397 I built it myself

[@JohnMurphy-dw6ml]

Are those Crown Victoria steel wheels? If not, what are they?

[@toddclyne3493]

Oldsmobile

[@brianconnor1810]

Great info. Can I ask, with the liberty not being a body on chassis design like a pickup does the spacer lift actually lift the whole jeep giving added ground clearance? If it was a body on chassis design spacers only lift the body not the chassis so the ground clearance stays the same with spacers on, is this correct? All the best from Scotland 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@toddclyne3493]

Yes it lifts the entire vehicle

[@michaelgraham2347]

Best part of the video is watching the kid working in the shop with his dad , nice truck though, I will never lift another vehicle I have death wobble fobia.

[@kennethatteberry6757]

The rear spring part # cross references to a 2007-2012 wrangler jk. Also, the emu shocks are black/yellow... so are those bilstein shocks? And what year Durango are those shocks from in the rear?

[@toddclyne3493]

@@kennethatteberry6757 the guy I bought the stuff from said they were jk rear springs. I'm only going with what he told me. The front strut spring combo came ome . I believe I showed the part number of that. The Durango shocks they fit all year Durango. I bought the cheapest ones to try now I wish I bought the best ones. The cheap ones work great the best would just be better.

[@matthewlee2686]

What's the difference with the upper A arms? Are they longer than the factory one or something?

[@toddclyne3493]

@@matthewlee2686 longer and stronger

[@dragonbomb64]

Do you have the part number for the Durango rear shocks you used?

[@toddclyne3493]

@@dragonbomb64 sorry no. I just looked them up. Not any other options.

[@Matt-rc4gb]

Can I get the part number list for the shocks and springs bro?

[@toddclyne3493]

@@Matt-rc4gb sorry don't have them

[@rodneycummings1456]

Awesome Jeep Liberty! Where did you get the front bumper and wench from? I've been looking around for one for my 2006 Liberty.

[@toddclyne3493]

I built it from scratch. I have a couple videos of me doing it. Thanks

[@just_in_time5518]

Looks good! I like the way that sits. What ever happened to the snow tracks that you on there? how did you like them/did you sell them? 😂

[@sammyspence6413]

What year rear spring and shocks? Got a libery I’m about to do mine this same way. Tia

[@toddclyne3493]

@@sammyspence6413 sorry I'm not sure on the springs. The shock I ordered where for a Dodge Durango. They only made them a few years and the part number is the same on all of the years

[@blakeericksen3024]

​@@toddclyne3493what year

[@JustGames-b3g]

How did handle? Do i need jba upper control arms?

[@toddclyne3493]

Handles great. Yes you do

[@zeez1705]

So from what year is the durango shock ? Thanks

[@toddclyne3493]

any year of them

[@austinmakin935]

Where did you buy all the parts for this lift?

[@toddclyne3493]

On FB market place

[@nhckphipps]

Stereo flatens the battery I find especially if your optima battery is on its way out usually lasts 3 days then totally flat.just swapped to a new optima battery seems okay again over a week still good

[@toddclyne3493]

Right on. This is a brand new battery. I suspect it's the anti theft system slowly draining the battery over time

[@hjgnkuyl]

Hi. Nice video. Can you tell me whats the durango shocks part number? Tks

[@toddclyne3493]

any year

[@pootlundon333pl]

I know it’s a terrible year and the wrong time of year but do you know of anybody in the market for a 1972 Polaris tx 500 triple??

[@kenmcnair4201]

UCA's are not OME...they are JBA

[@toddclyne3493]

Sorry I missed spoke

[@scorchin73chavez53]

the lift kit , and addons cost more than the actual vehicle :( brand new ......im seeig arond 24k minimum spent on just the suspension , the jeep is worth around 4 k , i always had dreams for mine , but i just use it as a daily now , sadly

[@toddclyne3493]

@@scorchin73chavez53 isn't that how most projects go 😂.

[@njhotroder]

Still cheaper than the newer stuff mopar sells and more heavy duty. It's not what's it's worth....but how durable it is with your use. Thats where it's value is..... if u are a car flipper find muscle cars from late 60s not jeeps.

[@matthewlee2686]

24k? Man wth you talking about? Pesos?