Jeep Patriot Airbag Warning Light OBD2 Codes B1B02 B1B06 Clockspring removed, inspected & replaced.

In this video, First, I found the OBD2 Codes B1B02 B1B06. Then, I removed and tested the steering wheel clock spring ribbon with a multi-meter. I also show how the clock spring rotor could be re/centered before the installation (If needed). At the end of the installation, I used my scanner to erase the trouble codes.

[@zm6301]

Great video, very thorough. Thanks for making.

[@mattowens6970]

I just got an alert for this video and currently staring at my airbag light.

[@DruDilly]

Did this fix your issue?

[@cullinhall5481]

Did this fix your issue?

[@pezdoragod8260]

I fucking hate this light

[@drakebrandon3574]

This car has so many issues I’m about to just trade it in😂 nothing more frustrating. My airbag light is one when slowing down, tire pressure light when they’re just fine, and change oil won’t reset.

[@OBSESSEDwithEMINEM]

I replace my class ring and I'm still getting squib 1 and squib 2 shorted together (b1b0b) any ideas?

[@mtlcarguy]

B1B0B is a code for the squib 1 on the passenger side. Usually this code can be generated by shorted wires or bad connections or a defective Module Occupant Restrain Controller or a defective airbag. This is a link to a PDF document to know more about the ORC system. www.google.ca/search?q=jeep+patriot+8443-25+adapter&biw=1920&bih=881&sxsrf=AJOqlzVPIURL4L9F1L5MX_70hEk3sBZvKQ%3A1675056860339&ei=3FbXY4GzFMy15NoPxqWL6Ak&ved=0ahUKEwiBkY6Jye78AhXMGlkFHcbSAp0Q4dUDCA8&uact=5&oq=jeep+patriot+8443-25+adapter&gs_lcp=Cgxnd3Mtd2l6LXNlcnAQAzIFCAAQogQyBwgAEB4QogQyBQgAEKIEMgUIABCiBDIFCAAQogQ6CggAEEcQ1gQQsAM6BAghEBVKBAhBGABKBAhGGABQ_wlY-j5g61VoAXABeACAAVyIAdMGkgECMTCYAQCgAQHIAQjAAQE&sclient=gws-wiz-serp

[@MrTheDays1]

So I can go to a salvage yard and grab a clock spring off another unit as long as I zip tire the clock spring before removing ?

[@mtlcarguy]

Only some salvage yards let you remove it . Also, zip ties can be used properly, as long as the steering wheel is centered and the front wheels are aligned straight ahead. To avoid compatibility problems I did get the clock spring from a vehicle made the same year.

[@MrTheDays1]

@@mtlcarguy thanks for the reply , ok I will go check to find the exact year and see if it’s possible to remove

[@mafu46]

What is the replacement part number ?

[@mtlcarguy]

The replacement part came from a recycling facility. The vehicle it came from was built the same year and equipped with the same options. I did not keep the part number but you can look at the video at 6:01 min. for a partial view.