Jeep Renegade (2015) Integration Kit

[@DiegoRodriguez-kt9ih]

Can any unit be attached to the integration kit? Is there a list of compatible units?

[@frankbaer3534]

Hi there, the kit works fine but since the installation the total kilometer display is blinking do you have any idea. Renegade 2015, Kenwood DMX 125 DAB

[@Connects2Uk]

Hey, Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm Best, team social @C2

[@prp0328]

What you use to cut the plastic, and there is something there you need to be careful like a wire or something?

[@Connects2Uk]

Hey, There isn't much in the back that is overtly important, the two looms on show are the only ones really, we used a handsaw to cut the plastic out, contact our technical department via support.connects2.com/tickets/technical/ and they will be able to talk you through every step of the process C2

[@babelhoo]

Hi! does this adaptor maintain the OEM reverse camera? do the active lineguides are retained? will the odometer start flashing or this module sends the required information over CAN-BUS so the BCM "thinks" the original stereo is in place? final question: are the wheel buttons configurable? thanks!

[@Connects2Uk]

If you contact our tech team via support.connects2.com they will be able to answer all of your questions within 24-48 hours C2

[@jarboloide]

Hello! All uconnect 5.0 settings can be accessed using the infoadapter ? Where can I buy the kit in Brazil?

[@Connects2Uk]

Hey +Jarbas Martinho, The Infodapter does maintain all of the settings for an aftermarket head unit, if you head to our website at www.connects.com and follow the support pages, you will be able to find stockists in your area C2

[@themixterchannel9954]

Hey Ihave a problem with the Interface Connects 2 that I have installed with my S160 Android in my Jeep Renegade. The issue is that the back two doors of the car are now locked when I open the car. Before I intalled the S160 and the connects 2, all the doors will open when I toch the bottom of Open doors over the keys. But now only the front doors opens and I have to open the back doors from the inside panel of the car. Do you know how I configure this into the menu of the Connects 2. ??. Thanks

[@Connects2Uk]

Hey Chris, i would advise getting in touch with our Technical Team over at support.connects2.com/tickets/technical/ and they will be able to help you with your issue C2

[@N8thanH4ndy]

What deck were you using in this video? I want to change the Uconnect 5.0 in my Jeep Renegade. Does the backup camera also work with the deck? Thank you.

[@Connects2Uk]

Hey +Nathan Handy, We were using a Parrot Asteroid head unit.The reverse camera is retained and can be accessed through the Infodapter in the settings menu, you get the choice of choosing either the park assist graphics or the camera view itself C2

[@N8thanH4ndy]

Thank you!