How to Wire a Low Cost Double-Din Head Unit with Back-Up Camera: Carzin and More

[@AndrewAlvarez-py1zz]

I do not think there is enough appreciation for fantastic instructional videos like this. The timing, the editing, the voice, the stable volume. Thank you sir for making this video. Great Job!

[@TheOriginalMechanic]

Thank you so much for the feedback!

[@quentinnewman5487]

Does it matter if the wire harness that plug in back of the cd player it’s wire or red or white???

[@quentinnewman5487]

I ask cuz I see his wires is red and mine silver and it didn’t work for me some reason

[@terrancemcfarland89]

​@quentinnewman5487 try the pink wire mine didn't go to anything so that's the next option and it worked

[@dmann968]

I installed this no name unit a couple years back but never installed the back up camera. Thanks to you I now know how to get it installed . Great video thank you so much !

[@Dj-oh4qt]

I’ve probably watched over 600,000 videos in the last couple months I just wanted to comment on your explanation and your tone and your speed which is all probably the best I’ve seen so far how was the comedy this guy must be a teacher

[@jessiec4128]

Thank you for posting this video. I have one of these radios. Now I know how to get it connected. These radios work pretty good. Just do not last. Eventually they stop working from touch. But they are so cheap. And mine works great with my amp and woofer. Perfect sound.

[@JRatica]

This video gave the best explanation, I got an understanding how to installed mine and I did It, only problem I had was finding that (grey) back in wire which I did some research and found out mine was (pink) so whoever reading this can make a note that some models come with that colour

[@berniegerth]

Thank you VERY Much for the PINK WIRE tip. Saves me a lot of time searching> Very grateful!

[@TheSpeakingsilence01]

mine came with orange speaker wires in place of what should have been grey

[@sanjarmukhammedov95]

Yes mine was pink too,can you tell me what you did with your brake and key wire? The brake wire for me is orange and key wire is brown

[@ChristopherSpencer616]

Mine also came as blue, pink orange, and brown, however when I connected the red to pink, I have zero camera feed. Is there a bypass around this?

[@dryter9727]

I did simply look up my wire and fit it to this unit. Didnt install the backing camera. I was already with the idea on how to but needed that video to confirm my idea before applying it. Glad you teach it so well. ❤❤

[@BeardlessCarmen]

Thank you so much for this detailed video that included troubleshooting! Especially since I faced the same issue with the quick splice connector | used on my truck's reverse light. After the 16-14 gauge quick splice connector I originally used failed to make a proper connection, I switched to a 22-18 gauge quick splice connector and it worked just as designed. I wish more installation videos included troubleshooting. For other people attempting to install their own stereos and back up camera: your vehicle's wiring diagram colors may be totally different than the aftermarket connector(s). Google your wiring diagram/connector to cross-reference. My truck's OEM connector had less wires than the aftermarket connector, so I capped the unused wires.

[@davidandkarinoldberg1377]

Finally… a practical and straightforward display and explanation!! Thanks so much!! Keep up the good work!!!

[@Jboost412]

Just a tip for the viewers the wire labeled “a3 key1” that is meant to go to your aftermarket steering wheel control box to allow programming and the use of your factory steering wheel controls, if your vehicle is equipped with such a feature other then that great job and very good explanation in sure this has helped many people

[@Pi-Mae]

This is actually super helpful because I couldn’t tell if that was maybe a mistake because back in was highlighted A 2

[@sanjarmukhammedov95]

Mine does have steering wheel control. Is that a separate item that I need to buy for my 2009 bmw 328xi

[@brandolino55]

​@@sanjarmukhammedov95Yes

[@Skankhunt19]

I don’t have wheel controls so what do I do just wire to red to get it to work? It’s not turning on with key and if I wire to red it just stays constant power?

[@deanstuder1775]

How lucky am I ? That bought the exact one you have here. Thanks a lot. Saved me a bunch of time . And it will work perfectly. It's a gift. Thank you.

[@atl7720]

You sir are a hero! I’m helping my coworker install his radio and I had no idea how to do it. U saved us hours and hours and hours

[@nickmartin8167]

Wow! This is the best video/instructions on this topic i have seen on uTube so far. I really understood every thing you said on first viewing. Keep up the great job.

[@blacklionrock]

This video is probably the most detailed install video I have seen to date on how to install these radios. The color diagram is different for each style. Nothing is universal except the vehicle aftermarket harnesses. Thank you for your hard work.

[@TheOriginalMechanic]

Thanks for watching and I appreciate the feedback.

[@alnear4953]

@@TheOriginalMechanic hello sir I am installing a dbl DIN radio in my daughter's 2011 Chev Cruze without OnStar. Trying to locate a wiring harness adaptor for the factory plug to the radio. Not having much luck yet with local parts place and Can tire doesn't show any listing. Do i need an interface kit or can I just splice into factory wires with supplied pigtails..? PS. No wiring diagram came with chinese radio.. shocker. Lol thanks in advance

[@divineoracle4809]

I appreciate this video! The speaker wiring was straight forward, the rest of them were sort of confusing. I was able to figure out all out eventually but the back up camera was a different story. Now i can install it finally! Thank you!

[@stevestokes4206]

Thanks, I really appreciate someone who actually explains this unit. I got everything but the backup wire. Thanks a bunch👍

[@nathandeunk3533]

Thanks so much! There was zero information online about the backup camera wiring, so I really appreciate the help!

[@moonchild5595]

I’ve been trying to figure out the backup camera for a good 10 minutes and then decided I’ll see if I can find a video and your video is perfect!

[@robertsimmons3543]

I have looked for days how to wire this because i had wires left over ( amp,ant,and so on )and i came across yours ,you took you time so i could keep up and i got a radio with back up now you got the best install detailed video on youtube thanks again

[@deeanrj9915]

Do you know where the power source is from the car to the unit? Not even a quarter way through yet

[@txbredcowboy8319]

Wow this is exactly what I needed. My new radio looks exactly like this just a few word differences.

[@marka2831]

I just received this stereo. Thank you for the review. Yeah I didn't think that they would still make the same model 3 years later

[@elenovillarino1762]

Balak ko din bumili sir, anong brand po ng stereo?

[@jeffreydavidson2426]

I just bought one for my 8th Gen Civic as an upgrade and really appreciate the help you're with wiring it up. Just one thing though I have never wired up anything. So a more step by step detailed oriented video would definitely help get all the ebay double din buyers to your front door! Or in this case subscribed. Thanks!

[@TheOriginalMechanic]

Thanks for watching and subscribing!

[@phatchet4776]

Did u need another harness to connect to honda harness

[@jeffreydavidson2426]

@@phatchet4776 Actually I took it to a friend who's more than capable and he did a great job wiring it up and it works just like factory. Thanks again!

[@sonnysurles]

A great job explaining the backup camera wiring. I have a similar unit with minimal instructions. After watching your video I was able to figure mine out, even though the wire colors were somewhat different. Thanks a bunch!

[@TheOriginalMechanic]

You're very welcome!

[@leedavies9309]

finally some one who explains how to do it who.s not in a rush

[@Theywaswrong]

I just bought this same radio on Amazon for 37 bucks, with two remotes and the back up camera. It's good enough for me and my 2010 Dodge Avenger. Works pretty good, don't know how long it will last but we'll see. Pretty happy with the cheapo, backup camera works and pairs up with my phone. You do have to import your phone book every time but it only takes a few seconds so no biggee for the cheapo.

[@malcolmmarzo2461]

Excellent. Well-paced, well-edited.

[@millin2222]

Hello I'm abit of a newbie. Would I need to disconnect the car batteries before wiring the new car radio...thanks for the share and advice

[@TheOriginalMechanic]

I don't disconnect for this job, but if you want to do it in the safest possible way or you are a worrier you probably should.

[@kionsumerall5339]

I have thw same radio and i was having a hard time with the camera...but your video saved me and its working GREAT!!! Your videos is very much appreciated

[@brownmon1]

Hey Bro I owe you a beer. For 5 days I been watching 6 other videos about the same unit and could not figure out why the camera did not trigger. I had the same problem (9:55) with the splice because the wires are so thin. Thanks man keep up the great work.

[@TheOriginalMechanic]

I have to fault them for including the wrong splices. But I don't think they even make an automotive style splice for those 22 gauge wires.

[@brownmon1]

@@TheOriginalMechanic Your right again, can't find one🤔

[@SIRAYEH]

Thanks dude. This really helped me a lot. Of course I used my own diagram but I needed a guide for me not to burn my car.

[@c2089me]

I saw your license plate! I am from Kenosha Wisconsin, that is wher I went to High School, but when I got out of the Military, I moved down to yucky Phoenix AZ.

[@gertis7420]

You are a life saver. The connection instructions on my unit, doesn't mention the gray wire. I'll try this tomorrow. Thanks so much.

[@bigblockimpala]

Thanks, I bought one without installations guide. And I¨m glad you found out so early that those blue "current thieves" as we say in Sweden, doesn't work too well.

[@J1I9M7M4Y]

Funkar din bra? Nyss fått hem min. :)

[@bigblockimpala]

Jo, jag är nöjd med den. Helt ok bild på kameran,Min kamera är något för långt ner då jag ville ha med dragkulan. så "parkeringsstrecken" 'är i luften.Ska försöka fixa det nån gång.... :)

[@J1I9M7M4Y]

@@bigblockimpala Kanon. Kommer montera min ovanför bakdörrarna på en Opel Combo. Hoppas det inte blir helknas. Vill ha den så att man ser dragkroken när man ska koppla släp/husvagn. Kanske återkommer med frågor när det är dags att montera! Tack för ditt svar!

[@bigblockimpala]

Det blir nog en bra placering kommer att gå fint tack vare den här videon. Min är bredvid regplåten på en Cheva Colorado Pickup, och det är lite lågt.Men jag kan tyvärr inte ha den nåt mycket högre.

[@innovativeintelligence4172]

Lost my wiring harness diagram so glad I found this video again. Also appreciate showing how to hook it up to the battery. Made me realize my new truck needed a special power line ran to work , they want you to run a separate wire to the fuse panel

[@djvinze4730]

Thank you so much I was able to install mine in my car. Now. Perfectly working.

[@lsjionredlinesupercharged2049]

Because of this video I completed mine though my power wire for camera on my deck was peach in color. Thank you sir

[@J1I9M7M4Y]

Thank you for making this walk through/guide video. It will be a huge help when im connecting my unit! Best regards/ Jimmy

[@jamesrankin9833]

Just got that radio, now I’m gonna attempt it. Good stuff!

[@cnc878ify]

This was perfect, thank you so much

[@giuseppe3terzo]

Grazie a te sono finalmente riuscito a fare i collegamenti giusti per commutare automaticamente dalla radio alla camera quando inserisco la retro marcia. GRAZIE ANCORA! BRAVO

[@imnottellinudontwannaknow3188]

thank you this helped so much! i bought a very, very similar unit (only difference was the bracket and installation guide) and couldn't get it to work. the harness connector had a brown wire for ignition and the red wire to the harness connector was red, which was also an ignition wire. it didn't work when brown and red were connected, but for some reason, somehow, the red that was for an interior light or something worked and fixed it.

[@eddiereyes3235]

Thanks for the valuable info on the wiring of this radio. I have a 2001 Ford Ranger with a similar radio which came with about four unmatching cables...

[@ChristopherSpencer616]

I have an 04 and can’t seem to figure out how to get the reverse activated, what color was the wire the red goes to?

[@thethirdtype]

I had the same problem with my backup camera on my install. Glad I watched this, as it was the same issue. Also have a Saturn.

[@TheDakotaParr]

Same

[@vidalchdr0437]

Ty . This is the most informative in layman terms greatest example of how to go wire for wire and install a stereo. What if some of the speaker wires are different colors then what are on the adapter?

[@TheOriginalMechanic]

Hopefully you have a guide stating which wire is for which channel . Otherwise trial and error until all four channels work. .

[@davoandersen5153]

bloody great video .. bloody good little units too !!

[@racenoob68]

Big thanks to this vid. I wired mine by following this.

[@billma8]

You should never under any circumstances wire nut in a car. Wire nuts are designed for line voltage solid core wires in buildings. With stranded wires, you cut strands when you tighten them which is just asking for electrical gremlins down the road. Eventually they vibrate themselves free due to the cut strands or just get a bad connection. Tap splices are also asking for problems. Vibration can cause the strands to get cut and over time fail/work intermittently. Butt splice if you want it done quick, just make sure you fold those wires back on each other. The best way is to lineman splice the wires, solder, then heat shrink. That connection will last forever. Also, spend 15 bucks and a little bit of time to put those leads in wire loom to prevent shorting.

[@TheOriginalMechanic]

Thanks for taking the time to share your knowledge of professional car audio wiring. In my last career as an industrial electrician, it was standard practice to wire nut 480V stranded wire motors to into stranded 480V factory wiring. We always finished by taping the connection with Scotch 33 electrical tape. The conditions were wet, hot (or cold) and often with vibration. A french fry factory. They held up well. Note in the video that I taped the connections with Scotch 33. No worries.

[@fochsi]

@@TheOriginalMechanic wire nut is that called ? that crap is forbidden in my country :D

[@sikskillz2186]

good job. very well explained.

[@MrUnemployedjoe]

Are the 4 led's on the camera always on when reversing ? Day and night? I thought those 4 led's were triggered to come on only when it is dark, my come on daytime and nightime when reversing.

[@TheOriginalMechanic]

I never checked that but it doesn't surprise me that they come on all the time. Leds in this application will likely last beyond the life of the unit.

[@longhuynh5249]

Good work putting it together, thanks very much.

[@vconrad607]

Great video. Thanks. I would just add that many of these have different names, but same exact set up. So some of the wires are colored differently. I would suggest to anyone following this video to install theirs to only pay attention to the terminal designation numbers A1, A2, A3 etc. Which brings me to my biggest question on this unit. The A1 terminal, in my case a pink wire, is labeled "Parking Sensor Control Wires +12v". Which really throws you off considering it's labeled +12v and everywhere you read up on it people say it's a ground from parking brake. So it's a bit disappointing that this video has everything I needed except for that one detail because he never uses the A1 wire. I'll be hooking this up today, and get back with the results. I'll try grounding the pink first before I go and throw any volts at it.my objective is.to ground it constantly so the kids can watch it. Kinda the only reason I got a radio with video player in the first place.

[@TheOriginalMechanic]

Thanks for clarifying the purpose of this wire. The explanations on the wiring diagrams on these units are disappointing. But I agree with the intent of that parking sensor wire: To prevent the driver from viewing a video while driving. Maybe a portable DVD player for the kids in the backseat would be a better idea.

[@paulleech6412]

Nice job B. Looks like you got this one figured out. I was here searching for info on your situation. AKA "You Dig" on Car Audio forum. Good luck.

[@sadesade9524]

@@TheOriginalMechanic what if I don't have a rear in on the unit that's a wire but I have pink parking sensor and a brown brake line

[@williamtuttle8231]

Best video I have seen on the backup camera installation. All the installation was clearly visible. Great job!

[@silviohetzer2881]

nice video , greatings from germany!!

[@NeeoDroid]

10/10 for this video sir very informative and super well described Thanks for the good work

[@64arguz]

I tried this humble radio on my daughter’s Honda Element and didn’t work Sounded good, but wasn’t standard “double din” and captured every single noise In existence , radio interference, engine noise when accelerating, etc ….I returned !

[@arringtonbates7463]

They have your video on Amazon for another stereo unit. The Yakalla double din stereo

[@Websrchr]

I purchased the exact same model, but with a different identifier since it's a SWM S7, not a Carzin 7010B. Around 4:00 you mention the need to get a wiring harness to match the factory harness, but there is no link as to where to get it and what part No. that is. Could you please help with that information. Thanks.

[@TheOriginalMechanic]

You have to do a search under the make and model and year of your car to find the aftermarket harness that will plug into and match the factory harness. Try metraonline.com for one possibility.

[@natethecollector7130]

Oh god 😂 wire nuts 😂😂😂 this guy is an expert 👌

[@brucebeverly2629]

No, no! Wire nuts are for dry, stationary appIcations such as house wiring inside junction boxes, light fixtures, etc. In automotive applications, the vibration and humidity will cause wire nut and crimp - on connections to corrode and fail over time. The wiring harness connections should ALL be soldered and sealed in heat shrink tubing, if reliability matters at all to you.

[@cabolarios7410]

Thank you very much I just installed mine.

[@mendimano]

Nice understandable tutorial, i wonder if there is any option to connect to this unit a CAN BUS adapter so we could see some car features on display.

[@YoungShizzie]

I fount my back wire pink on the back of the touch radio but it stil doesn’t work and my heat doesn’t show up it’s camecho on my 2004 Honda accord ex sedan

[@dparkinson1967]

Great video.very helpful Just one question? How do you wire it up to the driving wheel controller?

[@littlejohnj1]

this is my question also

[@Scratchingforcash]

Thank god for this video. Well done and thank you

[@CarlsonLipke]

Had similar head unit installed in my car but quality was really poor. I ended up installing Raspberry PI 4 with OpenAuto Pro software. Great thing in that project was that I could pick hardware that fits my needs regarding sound quality.

[@jccruzh]

Thanks, so much, great help.

[@demai4253]

thx mate , I was wondering wat the red wire next to the yellow rca reverse plug. powers leds on reverse camera!

[@kttheangel85]

i just happened to get one of these as an experiment to a see if i could install and b to see if it works..... mine works ... kinda ive discovered that the cars previous head unit was wired differntly to the plugs on this so it doesnt work while in motion lol hopefully this can help solve the mix up and i can get it working

[@yegwear6881]

My factory harness comes with one extra wire labeled “amp ground” Is it necessary to ground the amp near the radio or can I just tape that wire off?

[@josephcarter1920]

I just got mine installed. This video was so helpful. I had to watch it like 20 times but that's my fault😅

[@TheOriginalMechanic]

That's OK. Thanks for watching! and watching. and watching. I get credit for views and make a little more jingle.

[@umahlam]

Thank you so much, you help me too much But I have one question how to connect or install radio? Please can you tell me please 🙏🙏🙏

[@KroYweN_Official]

I got this same one but I couldn't figure out how to make the sound work

[@wry1007]

4:01 its Mario!

[@orlandomoore5905]

I like your video, It was very Informative and genuine! Thank You

[@colorspacmangalvez5990]

thank you for this post it help me out o much I install it f150 and its nice

[@TheSonidocobra]

You have more pictures

[@TheSonidocobra]

You have more

[@Oh_bae_basic7]

Could you use any metal surface for the power? And what power clamp we should use? Thank you Jordan

[@boppo8782]

when the image was up side down 😂

[@shay-ryanjones8965]

You're awesome!!!! Got it up and running in minutes!! 😁

[@Ryan-J]

Hi might be a stupid question but my battery keeps dieing if I slice the red and yellow wire together and plug in to the 12v ignition switch cable will this solve my issue ?

[@TheOriginalMechanic]

Check and see if the unit turns off when you shut the door. Some car makers don't turn off the radio when the ignition is turned off but only power down when the door is opened to exit. There are kits out there to solve this issue. Splicing those wires together just might work though.

[@Ryan-J]

@TheOriginalMechanic thankyou I appreciate your reply will try it in the morning

[@j.h-j5j]

Very good instructional video, it helped me to get the idea on what to do.

[@mrdiaz2575]

Nice video, straight to the point thanks 🙏

[@kat_td7675]

I have the same exact unit, can anyone help me turn off the clock that comes on when you turn off the power/when the unit is in stand by mode

[@loganclark2542]

Thanks so much for the video, I got mine to working now! 😃

[@ameliadickinson5455]

Could u show this type of stereo wiring set up I’m trying to install in the car as a radio

[@raymondpaule8753]

tnx to this video got my reverse cam installed correctly, now it automaticaly switches every time i reverse gear engage

[@TheOriginalMechanic]

you/re welcome

[@miamiholydaystherealdeal9519]

Thanks for sharing i wsant able to make the camera to work. Any way for further info in my case had to go setting and enable parking cause comes disable from factory And doest aliw me to se the camera and had to put together brake and bak in wires. Thanks again for sharing

[@fmjammofull]

Just bought one unit like this to my daughter as a birthday gift, i am anxious to get it and install it for her! She wanted Bluetooth to replace oem unit, she will get more with screen mirroring and backup camera! For 15$ on eBay!

[@iamlazarow3526]

How's it working for you? How is the music volume? I hear Chinese stereos don't sound loud at all. Please confirm. Thanks.

[@liveandletlive2894]

Where did you find for $15?

[@This_Black_Guy]

Very easy to understand, great explanation.

[@riskytime]

Excellent. Much appreciated. Succinct, very well executed and produced. Nothing we don't need, this is tthe medicine for anyone pulling their hair out over this. Thanks again

[@djkastilloelmusicam6440]

what color is the steering wheel radio wire to control the volume, I got lincoln town car 2004 thans

[@TheOriginalMechanic]

I didn't wire that up. I have a more detailed post on the wiring that may help: www.originalmechanic.com/2019/12/how-to-wire-low-cost-double-din-head.html

[@sameahandstuff5362]

when you turn off the radio, do the screen completely turn off? i read some reviews that the time/clock stays on which attracts the criminal element, can you please comment? can you play spotify from your phone to this device via Bluetooth and can you skip from the radio buttons to skip spotify on the phone?

[@TheOriginalMechanic]

I only did an install on this unit and certainly am no expert on the functionality. Perhaps another viewer may be able to help.

[@SadCowDisease1]

At 3:38 you say you are going to 'put a jumper on the two wires we wired together earlier' but it's just off screen. Are the 2 wires you wired together earlier the 'Back in' and the red wire from the yellow RCA cable? Or is it the 2 red wired from the backup light? I have a 703b from Amazon that is just slightly different from the one you have.

[@TheOriginalMechanic]

I just jumped 12V to the back- in input on the display to simulate the car in reverse. You may find this post I made of the wiring helpful: www.originalmechanic.com/2019/12/how-to-wire-low-cost-double-din-head.html

[@Justaguy332]

I have a 03 Lexus es300 does the blue and white go with the blue on a Metra 70-8113 splice those but what will I connect those too on the B wires ?

[@djkingkevin117]

I see only the wiring harness is being used does that also automatically connects with the factory amp to pass sounds through the car speakers?

[@TheOriginalMechanic]

All I can say is it worked out on the Saturn in this installation video.

[@djkingkevin117]

@@TheOriginalMechanic great just to clarify you did got sounds feedback from your car door speakers correct?

[@TheOriginalMechanic]

@@djkingkevin117 yes

[@damama8095]

Would've been nice to see the actual wires being connected. Im still confused about the key wire, does that connect to the acc wire? And does the yellow and red wire get connected together????

[@TheOriginalMechanic]

I have a blog post on this installation that includes more detailed wiring diagrams: www.originalmechanic.com/2019/12/how-to-wire-low-cost-double-din-head.html

[@BasiruLabbo]

Please is this connection the same for pontiac vibe 2003?

[@NancyNassar-w7b]

Hello i just bought one but when I turn it off the time stays on ? Is that normal would it drain my battery? Thank u and the video are very helpful and well explained.

[@TheOriginalMechanic]

When these stay on it can drain the battery, especially on GM and Saturn vehicles that keep the radio on until the door is opened.

[@videosbydesign7436]

I have installed this stereo to my ford ranger, audio was working good but had not connected the front right speaker, after wiring the front right speaker, no sound comes from any speaker. Anyone know what might be the issue?

[@pustelnik1964]

If you can't hear anything, there is either a connection error or a damaged front channel. I apologize as if I twisted a word but I write from Poland

[@thewalkingked36]

My unit has no wire in the A2 slot. A1, A2, and A3 are labeled as "spare" with no wire in them. What do i do now? Is there another wire i can attatch to??

[@dnegel9546]

I'm confused. My radio stays on even with car off. The radio is getting constant power. You said put together acc and b+ from the radio part to the power in the harness part. (3 cables). When I do this my radio is on constantly. If I remove the b+ cable it won't turn on. (2 cables).

[@TheOriginalMechanic]

Always 12V and ignition 12v were only together during the the initial test. When wiring the unit into the car wiring they connect to separate auto harness wires.

[@dnegel9546]

@@TheOriginalMechanic oh thanks for the reply. I ended up trying every possible combination I could think off. And I gave up. Best I could do was leave the acc and b+ 12v together to the car harness and manually turning off and on the radio. Which was fine with me. But then I ran into problems with the speakers. Seems the harness I got did not have enough connections even tho it seems like it does. ,🤷 For some reason only my rear speakers worked (4 speakers. 2 front and 2 rear.) With this again I tried all kinds of combinations and no luck. Overall I spent a solid 6hrs working on it. Only to just put back My oem unit. Then to make myself feel even more incompetent. I realized the unit itself would not fit properly without me making it work somehow. (Would have to make my own brackets.) . After reading on the Impala forums it seems that particular car has lots of issues with aftermarket 2din units. (09impala). But I appreciate the response and video. I will see if hopefully I can get a refund. Doubt it tho. There is a list of 2din units that fit properly but those are all like $200+. And all I wanted was to stream music by Bluetooth. So not worth it.

[@TheOriginalMechanic]

@@dnegel9546 I have heard of many issues with these units that result in returning them for refund. Sounds like you gave it a real good effort though it ended with frustration.

[@dnegel9546]

@@TheOriginalMechanic yeah man I even had a multimeter testing out each connector on the car harness to try and manually match the cables with the new harness to the radio. But no luck. I will attempt to get a refund. Tho I doubt I will get one.

[@ElsiJdd]

Is there anything you can do to stop it from draining battery overnight any wires that need to be disconnected

[@aarifbobade2403]

Nice video.i got all wiring connection,but not understand backup camera power connection and how it will select when i but my car gear in reverse.Please make me clear.

[@TheOriginalMechanic]

On one end the small red wire that runs along with video cable connects to the back-up light wiring. On the other the small red wire goes here: 3:12

[@aarifbobade2403]

@@TheOriginalMechanic Thanks for your valuable reply.which is backup light wiring.And i want to know how back camera will trun on when i will put gear in reverse.where is that connection.