Jeep Roof Rack Installation and Review - Rhino Rack Backbone

[@arturus]

You sir have cost me thousands of dollars with your videos. I keep buying things. Expect a cease and desist letter from my wife. All kidding aside, great content as always Brad. Ordered the rack yesterday and will have it installed by the shop as I do not have the moral fiber to drill into the roof. Kudos to you and your hands on approach. Definitely considering supporting you through patreon and would love to join you on a trip someday (I'm less than 2 hours north of san diego). All the best!

[@ao011114]

Great video Brad. I sure miss videos like these from you. 4 years later it made my life a whole lot easier. Thanks

[@TylerHarney]

PLEASE READ IF YOU ARE INSTALLING THE KIT AND MEASURE!! Most definitely double check the measurements of the supplied paper template! Mine didn't match up to the given measurements. So glad I checked right before I drilled. 123mm specified on the paper template was only 117.20mm

[@JeepTherapy]

🖐 You installed the rack about 2 years ago now. How’s it holding up?

[@robmclaughlin420]

Hey Brad, Just re-watching this video before we put a roof rack on the 2016 Jeep we have. Thanks for making all these great videos.

[@N8FLY]

Watching your video on this roof rack convinced me to buy it. It showed up today! I'm looking forward to installing it this weekend. I really enjoy all the quality videos you produce, especially because your build is almost exactly what I want mine (2016 JKU Rubicon) to end up like. Your videos have already helped considerably. Keep it up please!

[@TrailRecon]

Congrats on the new rack and good luck with your install. It's pretty easy, just take your time and measure twice!

[@wesleymcgonagle3394]

Great video Brad, i have the exact same rack on my JK. Installed it about 2 years ago i can attest to the gut feeling you get before you drill into your top. I have a Tepui rooftop tent on my rack and a Fox-wing awning. Keep up the great videos. Cheers, Wes.

[@TrailRecon]

Nice to know I wasn't the only one nervous about drilling! Thank you!

[@livrdrm1361]

Thank you for the video, I just wish I would have had it a week earlier. Your video is a lot better than the ones provided by Rhino-Rack. The only advice I would suggest is to measure the leg distance before trying to mount the entire unit. Thank you for all of your videos and for not being so over the top with the size of your lift kit, tires etc.

[@TrailRecon]

Thank you! I agree, I did fumble around with the feet for a bit until I got them lined up and a pre-measurement is a great suggestion.

[@markpate9656]

Brad, have the same rack on my 2014 Jeep JK. Like the low profile, no additional wind noise I can detect. Have used it on multiple off-road trips and have been able to adapt other manufactures accessories (Eezi-Awn and Front Runner) to it.

[@TrailRecon]

Great to hear from someone that has been using it!!! I can't wait to get some gear mounted up there and hit the trail.

[@MountnDewMe]

Brad, is there any chance that we could get a video of you and Marco doing pros/cons of both racks? The Gobi and Rhino Rack systems seem to be the more popular among overlanders and I'm personally having a hard time choosing which I want Haha. Just a suggestion. Thanks for the sick videos man!

[@847MicRoss]

"ROOF RACKS - the GREAT, the ORDINARY and the AWFUL. How to select the right one"

[@michaelhughes2168]

Thanks for posting Brad, very informative as usual. Looks great. That rack is on my wish list.

[@TrailRecon]

You are welcome! I'm very happy with how it looks.

[@AliciaInJeep]

Thank you for another very useful video, still not convinced to drill the holes, is it any roof rack with no drilling?

[@kayakdudeXP]

This rack was delivered today....thanks for the video. It was most helpful. Cant wait to install mine later this week.

[@barretthageman3350]

Nice. Next year I am going to hit the mods for my Rubi. I am most likely going to go with the KMS Safari Lo-Pro roof system. Has the front hoop, but mounts to the roll bar in the rear. But have to look into this one too.

[@Heartlanddualsport]

I must say that a is one good looking rack, I am a long ways off from needing the roof rack, but That looks sweet. It looks like you are still able to pull it into the garage and that a huge perk to me. I would not want to add something that would not permit me to park y jeep in the garage. Thanks again my friend for sharing another great video and part for the jeep. Keep up the great work and have a blessed week. Dale

[@BlackRifleSurvival]

My stealth rack from Gobi is getting delivered Tuesday I'm so dang excited. Finally can free up space I need so much in the inside of the jeep. I enjoy watching you build up your jeep. Inspired me to work on mine again when I have spare funds. Take care!

[@RedRockCrawlers]

BlackRifle Survival that’s always the trick right? When we have spare funds. Lately that is fewer and fewer. Haha

[@BlackRifleSurvival]

Red Rock Crawlers I have a checklist that seems endless for mods. Haha. Good stuff!

[@mrlaney62]

After watching this video, I ordered this rack. I ran into a couple of issues that I think are important to note for prospective buyers: 1. After I mounted the planks to the end rails (8:40 in the video), I turned it right side up to find that the screws had pushed into the topside of the plank ends causing the end of rack plank to bulge up. I corrected this by adding two additional flatwashers to the screws. 2. I ordered mine with quickmount legs that lock and unlock for quick removal. The six legs (as part of kit JA8213 at etrailer.com) came in the form of one kit with four legs and one kit with 2 legs. These were keyed differently between the two sets. I contacted Rhino Rack and they sent me some matching cylinders and keys to make it right. 3. Although I followed the fitting instructions meticulously, I could not align the rack to the legs. I had to drill a hole to expand the oval mounting points for two of the crossbars in order to correct this. It also helped that I was using a canoe/kayak ceiling hoist to raise and lower the rack. Other than these obstacles, the installation went well and the rack looks great. Thanks for this and your other videos!

[@cascadervsolarsolutions]

Thanks Master Chief. I was on the fence when it came to buying this rack. New Sub, look forward to new content!

[@ppalla]

Hi Brad, your videos are inspiring. My local auto shop has a 20% off fathers day special on, l picked up a rhino rack pioneer platform system & will be fitting it this weekend. I got a bit of a surprise picking it up as the pioneer platform is preassembled which means it doesnt fit in the back. Looks like for the Australian market they assemble them. So I'll be going back with a ute or trailer to collect it. Keep up the great video's.

[@jasoncottingham6573]

I'm putting on my Rhino Rack on as we speak. Thanks for such great content you made this way easier!

[@AliciaInJeep]

Wow! How was it? Happy with the results? I am still on the fence.

[@TikkerLoS]

I think my anxiety level went up to 8/10 watching you drill the hard top. that's just watching you drill YOUR hard top, lol. as much as I love the finished product, I'm not sure I'm up to that level of commitment

[@sexyworm1000]

Doesn’t take much work to patch fuckups on fibreglass

[@shawndunfee2566]

Hey Brad, I purchased this system upon your recommendation, I purchased the backbone system for my Jeep wrangler with this Pioneer platform.. I will say that the Product is nice but the U.S. customer service SUCKS! Upon assembly of my new rack i realized it was missing one little $2 part and they won't send it to me without charging me for it. And the funny thing is they are charging me $10 to ship it.

[@randifriedner]

I love the customization of your Jeep. I knw what I wanted, but after seeing this Jeep I got the KC HiLites light bar that you have and next on my list is the Rhino Rack. I love the low profile, clean lines, and versatility of this rack. Thanks for sharing.

[@ThePinoyAggie]

I have the exact same rack installed on my 2013 JKUR, and I love it. I can't wait to put a rooftop tent on it. Like you said, it is very clean looking, and the accessory options are plenty. I currently have the bracket for the Maxtraxx and ski rack installed. The interior padding is a nice touch too!

[@bebacklater526]

Hi George, Wanted to know if you still have this rack and how it's holding up. Thinking of installing on my 2017 JK. Thanks!

[@ThePinoyAggie]

@@bebacklater526 Hi, it is still holding strong. I decided not to put a rooftop tent, though. But, it is one of the best upgrades I did on my Jeep.

[@LClement]

So jealous of your setup. During my time of overlanding, I’ve had to accept I won’t have a nice, modified rig like yours for a long time. I need to just get out there and do it. I am a little worried as my truck as 215k miles.. but whatever. Gotta live.

[@TrailRecon]

You don't have to spend a lot of money to get out and explore and enjoy be the back roads, just make sure that truck is in good working order.

[@WildTouring]

Cheers for the video. These look to be a great bit of gear! Going to get one for my Isuzu Dmax.

[@TrailRecon]

I've had it for over a wheel now and sust got the tent mounted on the rack last night and I'm very happy with the quality.

[@louiskudlak2241]

Cool how it goes on the rear window, no drilling also 👍👍👍

[@aaronbrown2412]

I know it's been awhile since you installed this roof rack Any updates? Any likes, dislikes, issues found? Thanks...keep up the great videos!

[@OOHYEH]

Hi Aaron I have fitted the same roof rack but the trades version as it has sides to tie down and I added the roller on the rear . Can’t fault the whole concept as I have loaded up the Jeep and traveled most of the interior of Australia. The roller on the rear helps putting the kayak up

[@mikegonsalves3450]

Very nice install vid. Love the look of that rack. I only use my hard top during the winter months so I’ll probably go more toward the Gobi rack but this is a great option for a full time hardtop!

[@TrailRecon]

Ya, I think if you run a lot without your hardtop and need the storage, the Gobi is a good option.

[@Anormus1]

awesome awesome rack my man! i just might consider installing this on my JK. thanks for the great video!

[@TrailRecon]

I think it's a great investment if you are looking for a solid rack.

[@tpiiig]

Great video! Just used your arb install video and everything went smooth, cant wait to order my rack and use this video to help guide my install!

[@TrailRecon]

So great to hear the videos are helpful for you, thank you!

[@Overlanding_4_Sanity]

Awesome video Brad!! Looking forward to seeing that Badass jeep up close and hitting some trails with you and ovrlndx when we visit the west coast!👍👊💥

[@TrailRecon]

Just let us know when!

[@Overlanding_4_Sanity]

TrailRecon will do brother!!👍👍

[@georgegonzalez8676]

Hello how long it took to put roof rack because they charging me $100.00 an hour to put my maximus 3 rino rack please let me know thanks

[@timmyb8657]

Very nice Brad!! I would of put some silicone on the bolts just to be safe

[@TrailRecon]

Not a bad idea and I can always go back and do that if needed.... let's hope not!

[@OVRLNDX]

Awesome Brother! We need to go Camping soon!

[@TrailRecon]

Heck ya, I'm in!

[@gk367670]

i want to join one of this times

[@readyornotbyangeline1698]

Hi so brad ive been watching your channel and love it! Question can you still remove your 2 front tops without any problem or no?

[@350huesos]

good build.. been looking at buying one since june of last year, just was not sure of the drilling process.

[@Katherine-15-12]

Another great Aussie product 👍🇦🇺

[@SchoonerDarrow]

Hey Brad, meant ask if u might b doing front and rear camera installs, I know on of ur walk arounds had them, but not much detail on them....

[@TrailRecon]

I'd love to do a front and rear camera. Having the front would make some obstacles much easier. I'd have to replace my head unit first, so no plans currently, but maybe down the road.

[@RedRockCrawlers]

Good looking rack Brad. I don’t think I can drill into my hard top. But it looks really clean when your all done.

[@TrailRecon]

Thanks! I was pretty anxious about drilling the hard top, but now that it's done... easy day.

[@nicolebigham6632]

This is definitely me...supposedly the fiberglass is easy to repair with a patch kit if you screw up??

[@maddpepe313]

Looks good! My only question is, are the freedom panels still removable with the rack on?

[@TrailRecon]

Yes, no problems taking the freedom panels on and off.

[@pandafranchise]

Is the back half of the top still removable without taking the backoff?

[@JeepTherapy]

Andrew Francis yes you can take the whole thing off without removing the rack from the hard top. Sorry no one seemed to reply, but you worded it a little confusingly.

[@JeepSolid]

Great addition. Looking forward to the rooftop tent!

[@TrailRecon]

Thanks! I was hoping the tent was going to arrive this weekend, but looks like I have to wait a couple more days.... really excited to not sleep on the ground!

[@garymoore4230]

JeepSolid ii

[@jcs5202]

@trailrecon Great vid, as usual. 2 things? 1) can u take off the entire hardtop/RR at once together? and 2) u got any thoughts on Rhinos 3-bar VORTEX set up for a RTT? The bars seem lighter and even easier to install and remove when not in use. Thank you and keep the channel growing!

[@gabrieldelgado9778]

I have very similar questions.. my RTT is very tough to mount when working under the platform. Was also curious about Remington the hardtop. Any luck on these questions?

[@hamidnia7242]

9:20 the little T-nut seems cut carelessly, seems to me that someone just broke it from a bracket and tap it

[@michaelmathis1961]

If you take your top off and on a lot, you might think about a pulley system that could be attached to the ceiling of your garage. With such a system, you could unbolt your soft top from the jeep and then use that system to attach to your Rino Rack and lift it straight up and then drive off. Just reverse the process to replace the soft top and rack back on the jeep. Just an idea.

[@TrailRecon]

Great idea, much easier than my son and I man handling it.

[@riceman2112]

Thanks for this. I am getting one, but with the cross bars, to mount a tent mainly. Ill do the install, but my local shop here in Fort Collins, Bullhide 4x4, suggested some RTV around the holes to make sure there is no water leaking. Have you had any leaking issues?

[@UtahNick71]

I'm hoping Teraflex comes out with a Nebo rack for the 2 door. Otherwise the Rhino might be a possibility.

[@danielsteinberg7698]

Check out Gobi Racks. I have had mine on the JK since 2010. No drilling. Frame mounted.

[@TonyMellinger]

your link to Northridge isn't working. I like how low profile it is.

[@pastorammo]

You have the best videos Brad. Great presentation style.

[@alainbrouillette7740]

Where did you relocate the antenna ? Do you have a video for that ?

[@march.4809]

Nice install. I'm glad to see this review because I have been considering the two door version of this rack for my jk. With the low profile I think I could still get the Jeep in the garage. That is my concern.

[@TrailRecon]

Getting into the garage is very important to me... I hope I still can inch my way in when I get 37's!

[@michaelminge8041]

Can you still run thru an automatic car Wash?

[@TrailRecon]

So in the directions for the Pioneer Platform it says "Please remove crossbars when putting vehicle through an automatic car wash". Now I believe this is referring to the 3 bar roof rack system they sell, which is different than this setup. I don't know if I'll take it through the car wash now....

[@jkalamar]

no you shouldn't take any roof-rack through a car wash...platform rack or otherwise. too much can go wrong and things can get snagged especially any accessories you have. their instructions say no to this as well. definitely stay touchless or go with the quick-release legs to remove the platform if you want to laze it up and coast though an auto like me X-D

[@gabzilla2809]

Hi brad will this rack fit the 2018 rubicon 2 door?

[@rodneyhanbaum697]

My JKU came with the 4x4 body armor rack System. It looks great, HOWEVER, totally a pain when I want to take my top off. Would love to swap it out or sell it to get the rhino rack System

[@samurai242]

Hey Brad quick question. I noticed you have headliners installed and was wondering if you had to cut away at them when installing the window brackets, especially along the edge/seam? Thanks in advance!

[@CoMoEnTrAsAlE]

Super super clean, i like it a lot!

[@AZWESTSIDEWHEELERS]

Really great video awesome review and install have been watching your channel for a long time now and really like the look of this rack better very low profile and clean like you said. great job Brad. Look forward to the next one

[@garymoore4230]

AZ WESTSIDE WHEELERS ii

[@AZWESTSIDEWHEELERS]

Gary Moore what up

[@KC-ti6ox]

TrailRecon, I ordered the same size roof rack, and when i installed it, it was more to one side of the jeep. I messaged Rhino Rack and they said I was supposed to cut the middle and front footpad brackets and it also says that in the instructions. Did you do this step? and video of it as well?

[@kevinengland4675]

Very nice piece of kit Brad 👍

[@RedRockCrawlers]

Kevin England better get one for your rig

[@kevinengland4675]

Red Rock Crawlers I would but I love going naked all summer 😋

[@RedRockCrawlers]

Kevin England haha. Yeah I run with just a bikini top all summer.

[@kevinengland4675]

Red Rock Crawlers only way to spend the summer.... Top and doors off. Looking at getting sun shade for my YJ this year myself. 😊

[@RedRockCrawlers]

Kevin England very good!

[@crazyt8781]

Looks grate . Man. Keep up the good work.

[@TrailRecon]

Thank you!

[@bush3636]

Great rack and music choice.

[@TrailRecon]

Thank you!

[@محمدالبلوشي-ب5ق8و]

Great video, where can i find this pepper please 3:19 😢 I bought it second hand

[@youngm911]

Great video. What headliner kit do you have? do you have to drill through some areas of the headliner to get this mounted?

[@TrailRecon]

I have the Mopar headliner kit amzn.to/2wOvosL I did have to poke a few holes through it.

[@leventbuda2294]

Hello,when you load roof tent, how do you load maxtraxxes, gas baskets, bike carrier or example kayak carrier, offroad needs? How do you get enough space?

[@gerry786]

Please explain dynamic and static, can you mount items like kayak carriers and items like ARB awnings

[@TrailRecon]

Dynamic is in motion and static is sitting still. They have a bunch of accessory mounts, I'd recommend surfing their website for the application you are looking for.

[@gerry786]

TrailRecon thanks, great videos

[@adaa60]

Gerry, Rhino-Rack part number 43138B is an accessory bar system that will allow you to mount just about any (c-Channel) mounted product to the platform including bike carriers, kayak carriers, ski carriers and cargo boxes.

[@daisuke8872]

Brad, how is it holding up?? Mine started leaking as hell...lol Well, guess solving these issued is a part of fun, though.

[@DudeGuy1973]

Looks awesome Brad!

[@TrailRecon]

Thank you!

[@mrpastortube]

I just got a new 2016 four-door Jeep Wrangler unlimited. I love the Rhino rack! The exoskeleton are to bulky and take away from the beauty of the Jeep. Thank you so much for all your information and clear, easy to understand video tutorial. I think I finally found my low profile rack. PS what’s the price of this rack and where can I order it? Jim Allentown Pa. -Patriot, father, son, brother ,friend, grandfather, Marine, chaplain and Pastor of City Limits Assembly of God. Allentown Pa.. thank you for the wonderful video it was a great help in my decision. Jim- #Letsliveit

[@CommonSensePeople1776]

Looks like it would be a pain to get the freedom panels off. Is it?

[@caymonmartinez]

What was the exact measurements from the hardtop to the very top of the roof rack brad? Trying to see if it will clear the garage

[@MC-rh3fc]

Maybe I missed it, how does the rack attach to the brackets? Hoe easy is it to remove the rack when it is not needed? I have a sunrider for hardtop which won’t open with this rack. So, I want to install the rack when I am going camping.

[@Ranger42]

Excellent instructional vid. Wonder if the JL version will be as simple to instal.

[@fedvoxavoxa]

Love it! Shutout from Australia!

[@comingtofull-ageinchrist6736]

did you have any problems with water leaks since installing the Rhino Rack? Thanks again for all the great upgrade videos to your Jeeps, it's really going to prove to be very helpful for me when I get mine, and I'm thinking that buying a Jeep stock is the better way to go and do the upgrades myself. Your videos over the years are a great educational source! Thanks again, Brad!

[@rainerrakete7153]

Thank you for all the awesome videos. Can you still open the freedom top easily with the rack installed?

[@Rhino-Rack]

Yes, you can still open the freedom panels with the Rhino-Rack Backbone Pioneer System

[@Owl566]

Would you feel comfortable to lift the roof off by attaching ropes etc to the rack? Would it be strong enough?

[@dpaslaski]

Hi, would you be able to provide a link the taller spacers you purchased to be able to install your rooftop tent? I’m looking at picking this rack up. Thanks!

[@BP-uj9uq]

Can you hang the entire top from the rafters? That would make for very easy removal and storage!

[@310to703]

Awesome good looking rack nice setup

[@TrailRecon]

Thank you!

[@1111Overland]

Okay, just watched your “How has my rooftop tent lasted” video and had to re-watch this one. Couple questions: 1- you said the weight capacity I’d like 250 lbs... how does that hold the tent and two large adults? Seems like you would max that out quickly. 2- One thing that worries me about a roof rack like this (and the major reason I haven’t bought one) is I still want the ability to take my hardtop off. Could you do a video about that someday? I’d love to see the steps involved in hard top removal with this attached.

[@TrailRecon]

250lbs is the dynamic weight, I think the static weight is 800lbs. There are no special steps involved in taking the top off with this rack. Unlike a few others out there that secure to the rollbar, this one is only attached to the roof and everything comes off normally.

[@JamesJu999]

Thank you for the vlog. I haven't found any installation vd on the tube like this detailing. I have a question. I just installed my Hot Head headliner on my Jeep. Will the bracket inside going to mess up with the hard board headliner?

[@TrailRecon]

Thank you! I had to do a little trimming on the rear window side headliner insulation to get the bolts through.

[@rmbproductions1243]

I bought the same one but for a JL (backbone mounting system with the rhino rack platform). I can’t find it in any of the comments here if they had any issues (weight) when 2-3 people sleeping in the roof top tent. I’m concerned about the weight limit. Or maybe i just don’t understand the dynamic vs static weight. When you’re parked and the tent is set up, how much weight can this hold up?

[@carlospartida6438]

Another awesome vid Brad! Question; what was the install time? I just got mine yesterday and was trying to plan out the install day. Thanks

[@TrailRecon]

You can knock this out in an after noon if you don't have to fumble around with cameras like me! Good luck with your install!

[@Escape.Idiocracy]

Do you have a video mounting/securing your roof top tent? I am looking for a creative idea for how to mount ours... the tent rails sit 1.5" too wide on either side for the pioneer rack.

[@aggrex]

Great DIY roof rack video! Can you provide the part# for the heavy-duty metal leg kit?

[@JWheeler331]

What, if anything extra has to be done to remove the roof? The downfall to most I have seen is that they stop you from removing the roof.

[@TrailRecon]

Nothing stopping you from removing the top, the AEV one I believe bolts to brackets attached to the roll bars.

[@galvisvi]

Hi I bought the back bone system and the pioneer platform (both built and ready) but I got the Rhino-Rack RC Locking Leg kit that is not working to attach to the platform. Could you recommend what is the model of the leg kit that works?

[@lamhoang1187]

Do you think you can use your rhino roof rack to recovery when your Jeep was rolled over like a Arb roof rack? I love rhino rack cuz it light weight, new look but I don’t think it can recovery a rolled over car when you go extreme off road. What do you think?

[@blakescorsone4958]

Hey Brad, I notice on the Interior square brackets you had a black padding? Did that come with the Rhino Rack or was that something you bought additionally? Hope you seen this and get a chance to reply!! Love the Channel man... Keep up the Adventure!!!

[@douglasguenzel3841]

Great video! I have two questions. We have the older version Thule Force XXL cargo carrier that we use during the winter for skis. Can that be attached to this rack? Second, is there enough room to hide wiring in the platform to run lights from the rack?

[@TrailRecon]

Not sure about the Thule carrier, I'm sure there is a way to make it work? I'll be installing lights soon and there are some nice spots for running wires under the edges.

[@douglasguenzel3841]

Looking forward to that video.....Another couple of check marks in the Pro column for this rack system!!! Many Thanks....

[@chris1293]

Looking good! I have the same roof rack and love it, but what were those tube like cushions for? I didn't get any with my kit...

[@TrailRecon]

Oh man, I should have mentioned that in the video!!! The pads cover the forward vertical bars of the internal backbone system. Right next to where the passengers head is.... nice idea to have these.

[@chris1293]

i though so! it could get ugly if you hit your head against that edge. i currently have roll bar padding zipped tied to it but i bet the padding would look a lot nicer. thanks!

[@scarlettwinchester7408]

Would it be easier to put the tent on the platform before putting platform on the Jeep.?

[@ironturtle37]

That rack looks rad.... brad 😂👍

[@TrailRecon]

Agree! Thank you!

[@fred3k3]

HI, is this also possible on the Sky One Touch?

[@gambit2u862]

Nice video. I was psyched to get this rack, but it doesn’t look like Rhino Rack makes it for the TJ.

[@jeepinwithjulia]

Do you have to take the hardtop off to install? Great video, thanks!

[@ozzy7926]

I just ordered the pioneer platform from your website but I ordered the 76x54 for my 4 door jeep will that be to long?? As yours is the 72x56 I hope I didn't order the wrong one.

[@Berserkeroffroad]

Why didn't you get the quick disconnects? They allow you to completely remove the rack in minutes.

[@TrailRecon]

I'll have to look into that, but honestly, I don't think I'll be removing it.

[@jkalamar]

The Quick Disconnects are awesome but run the Platform about an inch taller than this setup, which is required for the quick-release mechanism to fit/work. Trade off of height vs. convenience, whatever works for you I guess!

[@Berserkeroffroad]

I have this rack on my Jeep and it's fantastic. My office has a low clearance parking garage so I'm not able to run the rack unless I'm on a trip. I also don't see a need to keep the extra weight on the roof.

[@jkalamar]

nice...sounds like a pretty good reason for the quick disconnects!! :-D

[@jaymanxxxx]

TrailRecon if you had to remove the rack how many screws ?

[@ronaldcobbley9668]

Looks great

[@russellgoodwater8759]

hey brad,the hardest part of my rhino rack install was the anxiety of drilling my hardtop...what do you think of the slider windows on jk hardtop? is there a video?