Jeep TJ steering pump flow restrictor porting for high flow and hydro assist steering

[@brianherskowitz3020]

Hey so I'm curious what and where did you got that pulley from Thanks man any update on the drilling appreciate you putting a new pump on mine tomorrow

[@slothfabgarage8233]

the smaller pulley was from trailgear. part number 303411. 6 rib 4.5 inch. the porting has been good, i am still considering opening it up a little further but it has been functional as is since doing it

[@BigFrogs4x4]

What pulley did you use?

[@slothfabgarage8233]

it was the trail gear 4.5 inch pulley

[@keithbeachy4219]

How did it work?

[@slothfabgarage8233]

Overall feeling is much better at low speeds and very little changed at high speeds. I may open it up another 1/32 or even 1/16 due to my smaller pulley. I need to be careful though as I do not want to lose pressure all together.

[@gagekemerer6296]

Did you ever drill a little more to see if it helped?

[@slothfabgarage8233]

i did not it worked well for the time i used it. any time i needed to turn fast i was at higher rpm anyways so it was okay. however with the new steering setup ill be running i will be porting it more.

[@gagekemerer6296]

Ok I just used a 5/32 bit today and it helped ALOT. But thought about going one more size up. But it is working for now until I swap my new motor so I might just leave it for now. Thank you for responding!

[@gagekemerer6296]

Ok I just used a 5/32 bit today and it helped ALOT. But thought about going one more size up. But it is working for now until I swap my new motor so I might just leave it for now. Thank you for responding!

[@slothfabgarage8233]

@@gagekemerer6296 you bet! happy to help!

[@bmgstang]

1995 grand Cherokee with psc hydro assist, was annoying to switch steering direction quickly (usually in parking lots) drilled it out now it works great! Thanks for the video.