Jeep will not start Crank No Start

[@long-jeep]

_Shop-Vac!_

[@jeremyhanna3852]

1:42 the either bunny took it

[@robertcurrie8909]

Wish my sons Cherokee was this easy to resolve the crank, start. Been fighting it for over 6 months to figure it out and still don’t have it running.

[@chadwaters259]

Same here. 3 mechanics later still crank/no start.

[@inukbuddhabob3596]

Any code in computer? May kick a Code 0320 maybe not. Replace crankshaft position sensor. They go bad. Use OEM part.

[@donaldburkey5550]

Check oil first make sure crank case ain't full of gas oil mix???

[@albafletcher9402]

Omg, look at that already

[@don-po1062]

Got a 1995, in the same position crank/no start. It sat for a year or so before i got it. So far i have replaced the distributor and rotor, fuel filter, fuel pump, fuel pump fuse, new battery (old one was doa), and all 6 spark plugs. Even though all of that didnt work to start it still needed it. A pretty hard newbie over here, anyone got any ideas?

[@castledomeknives9395]

I would replace the crank position sensor.. it is a very common problem ... look up a video on how to test and replace it ... I'm sure you'll find some here on KZbin... good luck

[@derikgg9655]

Try wiggling the wire harness to the top left of the valve cover gasket. Mine cranks but as soon as I wiggle while somone cranks it will fire right up.

[@jeremyhanna3852]

Cps

[@StephenPudumo]

Good.to.ķnow.your.formula

[@nathansmith8969]

I figured it had to be the cap and button as soon as I saw no spark after testing the coil