Jeep Wrangler 392 Auxiliary Battery Install

[@paly4x4]

You randomly showed up in my feed 1 day after I installed the American Adventure Labs mass cargo system. I am sure my Alexa wasn't listening... I currently have a Bluetti AC200l that I have to lug around. I need to do the math and see if the tray battery will be enough. Thank you so much for this video, you gave me some ideas to research!

[@cmwilfred]

What a great video!! Getting a “24 392 very soon. Been adding items on American Adventure labs site. It’s mind boggling having the Redarc system at the back under the storage drawers, so this is very educational 💪🏽

[@2ndChanceOverland]

That's great! We have been very happy with the American Adventure Lab products. Having the AUX battery and Redraw controller under the drawers keeps them out of the way and protected. The only downside is that you have to remove everything to access them if you ever need to (which you really shouldn't have to). Enjoy the 392!

[@alainbrouillette7740]

Please can you post the battery specs, brand , model # , etc .

[@rkendsley7561]

Thanks for the video. I'm installing a House Battery in my Wrangler JL 3.6L and I was able to get some good information from this video. I'm using the AAL tray for the Dual ARB/Batt/RedArc for my vehicle (More room in the storage area).

[@2ndChanceOverland]

Glad I could help

[@edwinsargenti2774]

What model battery did you use?

[@khalilismyname]

I like the setup really slick.

[@2ndChanceOverland]

Thanks! AAL makes some really nice products. You can tell they spend a lot of time engineering everything to work perfectly.

[@geraldcorrea4769]

What kind of roof rack is that? Do you have a sky one touch?

[@geraldcorrea4769]

Nevermind saw that you have the normal hard top

[@2ndChanceOverland]

It's the JCR Roof Rack. Unfortunately it does not work with the sky one touch from what I understand.

[@PILOT_PAYNE]

Where did you run the battery wire through the firewall?

[@2ndChanceOverland]

I folded the windshield down and passed the wire through the opening there on the passenger side.

[@Enjoy_livethelife]

Hello there. I'm working wiring my redarc redvision to my 392 and I was wondering if the ignition wire in the auxiliary switches worked foe you. That will save me some work to run the wire to the fuse box. Also if you have a location of that wire to share that will be great. Thank you in advance.

[@2ndChanceOverland]

Yes, the ignition wire with the aux switches worked perfectly. The loom with the 6 wires for the aux switches is in the passenger footwell by the firewall. The owners manual has a pretty good description of where it is as well as what each of the 6 wires goes to.

[@Enjoy_livethelife]

@@2ndChanceOverland I appreciate your reply. I'll look for it and get my redarc connected there.