Jeep Wrangler Antirock Swaybars

www.rockjock4x...
Well now that I’m getting around to posting this video, I’m already out west!!! I just finished up a 2300 mile drive, and I am highly impressed so far! Next week I will testing them Offroad, stay tuned for an entire suspension review video!
In this video, I install both front and rear Rockjock antirocks onto my Jeep Wrangler JKU. Formerly known as Currie antirocks (discussed in the video).
The idea of antirocks is simple, it’s a sway bar that is bendable enough for Offroad use while still retaining good on road handling. Now, when paired front and rear, they are designed to work together to offer great handling Offroad while still offering flex but keeping the body roll to a minimum.
So why did I go with antirocks? There are a lot of other Offroad sway bars,
I wanted something I never have to disconnect, I also want more stability Offroad compared to an unhooked swaybar (more about this in a future video)
Plus, most other companies don’t design the sway bars to work with a frame chop front bumper.
This wraps up my project list for the powerstop trail to sema! So let’s get to wheeling!!
Thanks for watching!
-Ben
JKGG

[@geneticmaskmen]

Best way to end Monday by watching a new jk gear and gadgets video

[@Whiteandsonsgarage]

TJ Piñata definitely makes the day better

[@geneticmaskmen]

@@Whiteandsonsgarage doesn't even feel like a Monday anymore 😉

[@leskobrandon538]

To limit your droop, get some rock jock-straps... LOL

[@lertsomboon1481]

You should wear a puppet on your hand since its doing most of the explaining... just kidding... Have a safe trip and I'm looking forward to seeing the videos.

[@CyprusCraft]

12:54 Pros and Cons

[@patandjessicasjeepadventur3227]

Why would Currie rename the AntiRock to RockJock ? RockJock sounds like a men’s jockstrap brand

[@CallsignVega]

So looking at the design, the Antirock swaybar is basically just a weak swaybar lol.

[@scottsavoie7072]

Great video, but I’d like to see what the driver side anti-rock looks like when you are flexed at the end of your video

[@williamlinnemeyer1945]

Best part of any day yours is practically set how I want mine to be would love to see a full review of the interior upgrades you've done

[@caroleertel2961]

Good luck at Trail to SEMA ....sounds like quite an opportunity & trip of a lifetime! Safe travels

[@jamesmerkel9442]

The ball joint threaded rod req & left thread I would make 2 rods not 1 rod. Allowing the two rods to work together but not straight line over top & bottom but offset 3/4" between ball joint connections. U will basically hve a empty bottom & empty top end of double threaded rod assemply. 2 rods working together but not straight over 1 another & 1/4-1/2 of built in flex + offset between bars. If 1 breaks u hve empty ends top & bottom or u could double link is running ski course,phat chance at track oval.

[@disgruntledconservativevet1798]

Too bad you didn’t install this on a TJ. I’m looking at getting them for my Jeep. I’m not particularly fond of the newer jeeps.

[@Robertkattt]

My Jeep has a 6inch lift. My only concern is the rear. It’s stock. The og sway bar isn’t even adjusted right and it looks like a twig ready to snap. Will this product that you installed help with onroad body sway?

[@jamesmerkel9442]

try? wisk handle spring w/ nearly no flex or give or spring. Sring & loop on a wisk handle is strong,last a life time of use, & the flex comes from how many flex wires r inside & the diameter of the handle prt. Each wire like bike rim tire can b turned to lossen or tighten for great strength as a total unit. The wider the wisk of wires the more total movement u r allowing. It has to travel up & down tire & limit sway while not limiting on the margin toe in & toe out of camber in or camber out, & most of all tire has to roll still. An over sized wisk handle stronger connection /hung up loop. More & thicker wire gauge bike like spokes & normal bs threaded double rod w/tie rod ends & I think u will hve it. U may want wisk handle to spring streach just a bit unlike normal wisk. I think I just did away w/ball joint ends also. Need bike soke adjustable wide wisk instead. God the more u know the crazier it gets, asked then saw the wisk. JBM

[@gysgt-t.o.a.d7608]

Where’d you get your front running lights/turn signals? @jkgearandgadgets

[@saltycashew9807]

Can't wait to see how these work out for you, I've been debating on these for months

[@4WDTrek]

Highly suggest! I have been running it for a little while now, even just did a comparison side by side on same obstacles video for my channel. If you have any doubts, just go for it! Made my decision after watching this channel. Love this channel!

[@kjhaglfjhgfasd]

Ive been running these for around 4 years, have never had a problem with them on or off road. A real great product.

[@jamesmerkel9442]

Seems like rear frame prt is going to hit something on some1 setup no matter what so.< lose the arm to frame gear bs just a front thing. U will need a complete rething how to handle torsion in the rear not liking it current deal at all toss it. Rework re thing better way same thing gained diff way completely back to drawing board toss it. Brakes ABS, & bumper & diff setups it's over lost this round to gremlins.

[@MichaelCook1981]

My passenger side quick disconnect won't clear the draglink, so I have to completely remove the link to disconnect. It gets old try to make sure it's the proper length every time. I'm thinking of getting an anti rock.

[@shanes4x4]

thank you for pointing out the rear bolt size for attaching and also the info on relocating the rear i have same issue , rear axle is shifted back. will be installing mine tomorrow but doing raptor series brand.

[@billpetersen2006]

Just coming upon your channel and your wife's channel now, I'm loving both! RockJock is actually a separate company from Currie, but it only had happened like a few weeks before you posted this video. My understanding is that splitting the company in two made the most sense as the third generation prepared to take over from John (who took RockJock) and Ray and Charlie (who kept Currie). I'm looking forward to catching up on more of your videos, cheers!

[@4WDTrek]

Oh man. I didn't not know they actually separated. I'm actually doing an install video as well for my channel. Thats good to know!

[@alphamike2839]

BTW, Live in Phoenix. Have fun while you are here!

[@lonniet.2816]

Great stuff ,very informative and welcome to Arizona!!

[@joshwellborn1342]

What lights did you use in place of the turn signals under the headlights?

[@Md-ly1ce]

Would the anti rock rear work well with the pro sway loc front?

[@redbarry2540]

I installed the rock-jocks, and just put 1400 miles on them...yah a little more body roll, but the fact that I don’t have to disco?!? Great piece of kit all the way, and the flex is pretty damn good too.

[@4WDTrek]

I agree with you completely on this! Can really see the difference in some of my videos I made. I'm super happy with the swap over!

[@JWard2]

This is the best of no worlds. It's ok on road and ok off-road. I am surprised to see you running this. The quick release sway bars were better at stiffening on road. And better articulation off road.

[@JKGearandGadgets]

It’s very nice Offroad during speeds more than crawling,

[@joerouth6255]

You both have good points. I would tend to agree with the aspect though that for crawling it is better to be completely disconnected. Problem is is that most of us crawl and then do a high-speed trail and then crawl again.

[@crkaiserman1442]

Please, can you tell me if this AntiRock Kit works with Wrangler 2014 JKU with 2.5" ARB OME LIFT kit ? Do you think it is worth it for a low lift 2.5 ?

[@4WDTrek]

It will be close, but I have mine on a 3.5" lift and it isn't quite fully shortened. So I would think that a 2.5" lift would be capable of running this antirock

[@vroomvroom6986]

Need to build a flex ramp for the videos

[@canonphoto]

Too much messing around for me, sometimes simple is best, spent just over $200 Can. and got Rubicon Express quick disconnects, but that wouldn’t make for any great entertainment installing on your channel.

[@JKGearandGadgets]

I made a video a while back on sway bar disconnects

[@LarryRichelli]

So if I am looking at a new jeep, with this setup I don't need to buy the Rubicon...I could buy a less expensive model, right?

[@JKGearandGadgets]

The rubicon does have other great features other than the sway bar disconnect. Transfer case and axles are another big plus to the rubicon

[@jansen6699]

A Video which shows the flex with connected, fully disconnected and with the antirock would be cool to check how much flex you loose with the antirock

[@4WDTrek]

I'll be posting up a video of exactly that in a couple days on my channel

[@jansen6699]

@@4WDTrek nice

[@jamesmerkel9442]

that bushing & bracket r shit prt in cereal box wimpy. At a bare min u need 2 not 1 of those wimpy brackets & aluminum bushings not poly crap & if the aluminum bushing can run from 1 to other cereal box prt *2 barest of min strength.

[@JKGearandGadgets]

It has held up well so far

[@girldad4life24]

What settings do you run for your Falcon Shocks in regards to "daily driving/highway"?

[@JKGearandGadgets]

I run on the road with them at 2.6

[@jkustockaphobia2421]

If KZbin had a “fuck yea!🤟🏽” button is hit it lol but for now I’ll just do the “👍🏻” I have the antirock but just in the front and run nothing in the rear and I actually like the body roll lol feels more like a Jeep to me .. more suspension travel as I drive

[@SamboneSlice]

EVO HD links. You can get them in various lengths. So you can get them a bit longer than what came with the Antirock. They are super beefy. I was surprised to find they actually reduced my body roll just a bit. FYI.

[@jamesmerkel9442]

I cook alot of fried eggs & well.

[@nelsonenaccion4x424]

My freind what brend and model of BUMPER did you have on it in the red Jku ? thay looks Niiiiiiiiiiiiiiiiiiiiiiiiiiice

[@JKGearandGadgets]

It is from 7slotcustoms!

[@jamesmerkel9442]

U need to make gear sway arm prt longer & hve 3 diff end holes to connect up adjustment & if u break it off at hole just use 1 or 2 nd hole. Your missing arm of triangle & bracket to frame that limits max travel b4 it went plumb & flipped over.

[@luiss110]

Man I want to start a channel but don’t even know where to start. How long you have your channel

[@JKGearandGadgets]

About 3 years. It’s a lot of work

[@dougmatlack147]

Edsttdeudy6

[@bah5310]

A lot of work is an understatement. I've made a few videos and had no idea the time it takes to film, edit and then upload. My hats off to the people that do this. When I see a thumbs down I get pissed. Even a poor quality video of still a lot of work. I like to see the DIY builders it makes the adventure that much more impressive.

[@luiss110]

You know when people tell you, do what you love. I love car any car and will love to review, project cars and a little bit of everything in a channel. Go for trips and record Jeep, cars. I guess I just have to start. I got a lift for my Jeep and saving money for my tires so maybe I’ll record the process of that

[@myloopooping]

You should flex every video.

[@Casey250]

Curious to your experience with it... been planning out a 'new' build and some of the high clearance JL bumpers recommend replacing the sway bar to free up clearance from the rubi disconnect. Also I am lazy and hate disconnecting my sway bar every time I go out lol.

[@spelwurdsrite3422]

Were the same. Im lazy and dont want to get out to disconnect either so I just got one and its fantastic. I wouldnt worry about getting the rear since the stock rear swaybar is already skinny enough that it will pretty much hit full flex before a connected front will begin to flex in the slightest. Once the antirock is on, your handling will feel like driving an ice skate because the jeep likes to tip side to side while driving, although its so minimal, you barely notice it until you have to corner hard or hit something that bumps the jeep over at a good angle like a speed bump or curb or whatnot.

[@xTinBenderX]

SwayLOC™ is the only true dual rate off-road anti-swaybar for Jeep® Wrangler™

[@671JK]

Great process! So with the new setup do we need to still relocate the brake lines? Thank you for sharing your review, informative!

[@jimcarland2829]

So I am running into the same issue you had with the arms coming too far forward to where the rear axle sits. If I undermount like you did, everything lines up perfectly... Have you ever run into departure clearance issues yet running the rear flipped?

[@Sniperssx]

Want know about til light conversion from squer to round style like it I'm sure there's a DYI to installed pls let me know

[@JLLIFEOFFROAD]

cant wait to see this in action vro

[@4WDTrek]

Doing a comparison video on this. Also, posting up video of it in action tomorrow on my channel if you are interested

[@jamesmerkel9442]

after washer needs a lock pin of some kind then allen nut. If washer was not round but sq & main metal component w/gearing had a sq opening to line up w/,then pin then nut is just a keeper.

[@krashnpa]

Just tap it in. Tap, tap, taparoo! Man, hoping you don't end up knocking that sucker off or bending it out west!

[@jerrydarr7743]

Will it work on a 1983 CJ7 and what is my benefits and cons

[@mericaeveryday]

Hit us up in AZ. Would love to check out the rig. Provided you have time.

[@clwade10]

Loving these videos Ben! I remember in one of your previous videos you had a shot on the side of the body to show roll on the street fully disconnected, will you be taking any video of on street body roll for comparrison? I am close to pulling the trigger on Antirock myself that is the biggest concern for my daily driver jku. Great work!

[@dougmatlack147]

Egsuav

[@clwade10]

@@dougmatlack147 ?

[@JS-tb9hu]

Doug Matlack why are you commenting random stuff on everyone's comments?

[@Ghost-oq4qj]

It does say Currie btw

[@jim9win]

What inner fender are those I have the same shock and looking for something

[@JKGearandGadgets]

They are from Hyline Offroad, great product. I have a video of the install

[@clintmcjeepjunkie820]

Anti-rock.... I needed that at windrock Park this weekend in East Tennessee. I got a rock stuck in my brakes and it sounded like the axle had broken. 🤣 It was so bad the Jeep would not roll

[@dewsySPEED]

Wait so you just installed these, but say “this is the best my Jeep has ever driven.” Then say we’ll do some tests coming up. Also curious, you buy these or are these guys a sponsor and hook you up. I DO appreciate your videos though, good looking jeeps.

[@JKGearandGadgets]

Yeah it was noticeable right away. And no this was not sponsored or an endorsement. Whenever someone does sponsor the channel I say it in the videos

[@dewsySPEED]

Good to see it was unbiased, you never know these days. Watching your “Long Arm” right now.. 👍

[@TacticalNinja1]

Hey bro saw that you recently got Falcon Shocks! Congrats! 😁 Just an FYI. I highly recommend you also get a front shock relocation bracket. If you plan flexing on rocks that is. Without the bracket the shock body rubbs on the frame! Rock On Bro!

[@gragra556]

You should do a video on what you think are the most and least important upgrades and why. Thanx

[@marvindhill6673]

Did they make any noise after install? I got a set of disconnects and they are noisey. Looking into the antirock

[@targetoz5470]

Surely having no sway bars is better for off road, comp rigs don't use sway bars and having said wouldn't it be a better idea to develop after market front AND rear sway bar disconnect?

[@JKGearandGadgets]

Surprisingly it’s not, most comp rigs have anti rock style sway bars as well

[@targetoz5470]

@@JKGearandGadgets is that because they drive to the comp sites? Why I ask is as you know the reaction and operation of a sway bar when the axle articulates it wants to drag the other side to match the lowest wheel which the picks up the rear or the front whichever is the lowest. I've seen your rig going off road am quite impressed so I'm assuming the sway bars are not very stiff?

[@stretchedout6408]

There is a video out there that if you don’t run a rear sway bar you get so much flex that you can’t drive it and you lower your score on a rti ramp

[@CoppertheJeep]

what do you do with the factory wire connector on the Rubicon?

[@JKGearandGadgets]

Tied it out of the way and turned the sway bar off with JScan app

[@rwhellen]

some body may have asked and I am a novice so are fenders plastic?

[@JKGearandGadgets]

Yes these are MCE narrow flares. Plastic and flexible, also very lightweight compared to steel

[@anthonypadilla3026]

Too stiff off road, too soft on the road. I simply got JKS quick disconnects

[@sobrietyguidance2900]

I live in California Near ALL the trails and I run on granite everywhere. We have more trails than anyone and I NEVER have needed these or seen anyone who has. Sorry. Most the JEEP EXTRA stuff people don't need as long as they can drive. Small lift, little bit bigger tires and that's it. MUD, ROCK, RIVERS and SAND the rest is just fun extra stuff so don't think you need a lot to have a blast.

[@JKGearandGadgets]

If you have never seen a rig with anti rocks out on the trails, then I’m not sure what to tell you.

[@JKGearandGadgets]

But yes, like I’ve said in multiple videos. All you need is a 4wd vehicle, and gas. Go have fun, see what you need for trails that you want to run and go from there.

[@sobrietyguidance2900]

@@JKGearandGadgets I said I've never seen anyone NEED them, not I've never seen them. If you need them you are not driving on the right part of the trail well. I'm not attacking you, I am trying to let guys know they don't need all that so they can go have fun sooner. We weld things back together that snap and keep going but those don't snap and if they do it really doesn't matter. I haven't seen one fail yet. Not saying they don't, but most things fail eventually, it's just there are tons of other upgrades guys can put on that will actually make a difference. So it's another fluff product. I realize you have your video and this is your gig and you may have gotten some free parts or whatever. I get it and all the extra stuff is cool and fun. Tomorrow we'll mud bog in the valley and hit the rocks and snow after, enjoy the mud back there, but those jeeps are kind a pretty. Be well.

[@jojobball1]

Appreciate all your videos. Used this video today to help me through the install of my front antirock sway bar today.

[@frankcastle9691]

For all the money you have in a jeep you could've gotten a rock bouncer.

[@JKGearandGadgets]

Then you need a truck, then you need a trailer. Then you will only go wheeling with other bouncers, then you’ll break big expensive parts ($200 axle shaft is now $900). You can’t drive it on the road to get ice cream after a day of wheeling. That’s like telling someone with a twin turbo corvette that they should have just bought a nascar. Different applications and uses

[@JKGearandGadgets]

I always suggest someone go ride along in a bouncer for a full weekend to see what it’s like lol.

[@frankcastle9691]

@JK Gear and Gadgets where I'm from you can drive anything on the road. Your running 40s on a jk, im assuming you're not running 200$ axel shifts. A lot of people with your setup trailer their jeep anyway.

[@johngarcia2516]

Looks like the back is going to rub....

[@JKGearandGadgets]

No rubbing since install

[@HONdAVE]

What are those front grill turn signal lights? I Need them

[@TORA-COMMANDO]

I have the front Antirock swaybar and hate it. It was on my Jeep when I purchased it and the body roll is too much, I will not let me wife or daughter drive this Jeep because of it. I will be removing mine and going to a stock swaybar very soon.

[@JKGearandGadgets]

What shocks do you have?

[@TORA-COMMANDO]

@@JKGearandGadgets Fox 2.0 Remote Resi. Rock Krawler lift with MetalCloak 3.5" springs.

[@TORA-COMMANDO]

@@JKGearandGadgets I'm also running PSC Hydro Assist.

[@JWard2]

Exactly. The anti rock is the best of no world's. Disconnects are where it's at

[@organicmechanic8170]

@jkgearandgadgets did you install either of the RockJock Antirock sway bars on your gladiator? I'm really interested in installing both the front and rear on my JT and was wondering if you did and could offer any feedback. Thanks.

[@JKGearandGadgets]

I have not yet. I would like to do the rear, it looks very interesting for our JTs

[@danhambrick6331]

Looks like all the KZbinrs are heading to The Trail To Sema...

[@justjk-ing]

Nice video. I put synthetic grease in the ends and while I drove the torsion bar into the mounts. GREASE, GREASE GREASE!

[@4WDTrek]

I sprayed mine down with grease as well. Helped a lot to get the bushings in.

[@steelgatorcrimsontide7403]

I like all of the installbecause you are helping me figure out things that I'm planning on doing to my Jeep

[@pedrowatkins6167]

Awesome video.i want to put at least one on my front of my 90 yj.i have a lot of body roll

[@persicon_jl]

The more videos I try to make, the more I appreciate how informative and great your videos are man. Nice job as always

[@ifp123]

I have an issue; I plan to contact [them] Monday, but I have my RockJock Anti's installed, whet to Rausch yesterday, and lo and behold I have way lesser articulation than when I had the JKS Quicker disco's (taking them both off). The people I wheeled with also heard "binding" noises when I was on newbie Trail 11 🤷🏼‍♂️ There's no way I can do Blues and Blacks at this point. What could be wrong? I currently have an AEV 4" lift on 37's, and had full articulation on prior outings.

[@JKGearandGadgets]

How much lift do you have? you need to make sure the links are long enough

[@ifp123]

@@JKGearandGadgets AEV 4.5"

[@ifp123]

@@JKGearandGadgets Thanks for your help - Turns out, its hard to troubleshoot issues while inside your own Jeep. Turns out I needed some rear bump stop tweaking; the noise was the rear tires rubbing on the frame while flexed.

[@4WDTrek]

@@ifp123 this is very good to know. I was wondering the same things for mine. I think I'm having the same issues with mine. Good to know for my own install and review video. So thanks!

[@Gordon87Gekko]

Is Freeway driving stll ok or too much body roll?

[@JKGearandGadgets]

A lot will depend on the other suspension components. Typically it’s still stiff enough for freeway driving. It starts to get a little looser with soft shocks and 3 link long arms etc.

[@JKGearandGadgets]

But I drive mine on the highway very often

[@brand504121]

Trying to decide. I got a new jeep but don’t want to let the tires and suspension go to waste by replacing it. Is that a valid reason not to upgrade? Maybe lighting first?

[@gjkelly]

I've had my jeep for about a year and just now looking into upgrades. It's really tempting to go all out right from the start but I enjoyed getting out and wheeling stock, it's made me focus on picking lines and now I know exactly what I need to upgrade for what I want to do

[@J.Bradley.]

I'm gonna need PowerStop to pair up with the channel and drop that discount code like asap before I replace my pads.

[@JKGearandGadgets]

I will ask! Lol

[@Ghost-oq4qj]

I think ur go pro did pretty well

[@zachbash7356]

YOU NEED TO HIDE YOUR LICENSE PLATE BOSS. THERE ARE SOME SICK FUNS OUT THERE

[@SoManyBasses]

So, if I gave you my license plate.....what exactly do you think you could do to me?

[@4WDTrek]

I did have someone creep on my channel and start commenting on where my house was. It was really weird. Not sure how they did that.

[@rjet43]

Love them just did the front on my tj

[@keithhodge395]

You got bleepingjeeps anti seize on your hand

[@Voyagersk9]

Awesome video!! Can’t wait for your trip!!

[@Xx_Denied_xX]

More gladiator videos coming soon? Would like to see how the articulation is with the leveling kit and 37s before you add a full lift!

[@JKGearandGadgets]

Yes when i get back!

[@SpreadArmyProductions07]

You should get limiting straps

[@nelsonenaccion4x424]

Great video is clear some of my question about Rubicon sway bar desconect

[@4WDTrek]

I had my rubicon disconnect fail as well. Did this upgrade and have been very happy about it. As you can see in some of my uploaded videos. And soon to be comparison vs disconnected, connected and the antirock on the same obstacles

[@Voyagersk9]

Love you guys!! You are the real deal!! Fun to follow!! 👍🏻👍🏻

[@timritchieblue]

Looks good, I had to drill a new hole back 1.1/4” and new tab on axle

[@Q66BBQ]

I really enjoy your videos! I've got a 16 Sport that I'm starting on and discovered the channel while looking at diff options. Thanks for all the info!

[@4WDTrek]

Need to be careful! This channel is feeding my upgrade addiction! As well as my video posting addiction! Haha But its a fantastic channel to watch!

[@alphamike2839]

Nice install. What sliders are you running?

[@Matt_Iifts]

I wouldn’t worry about making boring videos. You have the perfect mix right now of action and knowledge, don’t change a thing with the vids! Have fun out west, should be one hell of a trip!

[@4WDTrek]

I agree! Perfect balance for entertainment! Trying to strive for that on my own channel.

[@GentleGiantFan]

Your Jeep is a 2010, right? So how may years did you get out of the OEM electronic sway bar before swapping? Seems I've read the OEMs have a much shorter lifespan than 9 years. Thanks! Great video btw (as usual).

[@JKGearandGadgets]

It lasted about 6-7 Years

[@GentleGiantFan]

@@JKGearandGadgets Thanks man! Look forward to the next video.

[@discover4x4]

Curious if you're still running that rear under the frame or if that became a issue?

[@JKGearandGadgets]

Still running it under the frame. I’ll switch sometime, but it hasn’t caused any issues

[@discover4x4]

@@JKGearandGadgets thanks for the response. I'll be installing mine today and I'm theorizing I'll be running into some issues too. 1.5" rear stretch, d60 and 5.5" lift. Fingers crossed. Oh and BTW, also a Red JKU! 😜😊

[@Whiteandsonsgarage]

Awesome video mate, I’ve been thinking about doing this on my tj for a couple months now, but don’t know if it’s worth it

[@spelwurdsrite3422]

its worth it with the TJ because you have two or three other holes drilled in the arm and you can move the end link to tighten up or loosen the overall ride quality. When an antirock is installed, its like driving an ice skate, imagine how the skate sits in one spot while the shoe (or body) tips side to side. This body roll really isnt that noticeable and if it does seem like too much, just tighten it up by moving the end link. The front sway bar from factory is really thick while the rear is quite thin so you can do like me and just get the front and call it a day.

[@Whiteandsonsgarage]

SpelWurdsRite thank you for the tip mate, I might have a better look into it

[@americanrambler4972]

Based on what you said, replacing the sway bar motor on your stock bar would be the best option. Or just put a smaller diameter stock bar on and save a lot of mismatch parts grief. This looks suspiciously like parts cannon shooting just for bragging about spending for upgrades that may or may not fit plus add weight and much cost with an actual performance degradation. Not the best choice for many.

[@JKGearandGadgets]

The motor isn’t the issue, it’s the actual gears inside the unit. I’m confused about your comment. Parts cannon? Everything fits? 3 link, adjustable shocks, antirocks, is no where near a performance degradation

[@americanrambler4972]

JK Gear and Gadgets I get the desire to upgrade the Jeep to get a better suspension function for the type of off road and on road use environment your Jeep is operating in. I guess what I am trying to say is as you constantly go bigger and beefier in your build up, your trying to stay in that balance of articulation capability while retaining adequate control for on road Performance at speeds above crawling speeds for off road terrain. At the end of the day, after all the parts changing, how close have you wound up ultimately returning to the original suspension tuning as built by Jeep, but only with bigger tires and a whole lot more weight? With all that work, just how much actual gain have you obtained over the baseline you started with? And what have you given up in the mean time? You put a serious amount of effort in upgrading your sway bar system. How is what you did better than taking a slightly less stiff more flexible OEM non disconnecting bar and installing it with longer links to accommodate the additional lifted axle height? At the end of the day this installation required a number of modifications to install and added not an insignificant amount of weight. You indicate you like the results you saw, but you have made so many changes to everything but the door handles, how do you keep track of the baseline you started with and are not just going in a circle around that? The Jeep Rubicon is pretty potent right out of the box, and everything you’ve done is an attempt to improve on that. Have you crossed into the world of diminished returns?

[@venom0300]

Who makes that rear bumper??

[@STuTe51]

Did you do a video on your 8 bolt lug upgrade? If so, please show.

[@JKGearandGadgets]

They are full one ton axles. I have a video series on them. Look at my playlists and find JK one ton swap

[@jaysongilbertson101]

I looked at these. I went with ORO sway loc. give you the best of both worlds. On-road and Off-Road modes with a flip of a switch. Antirock is old technology

[@JKGearandGadgets]

The Sway loc is great! But I’ve really like the Offroad performance with the antirock as it still offers some stability during Off camber situations

[@jaysongilbertson101]

@@JKGearandGadgets So does Sway Loc. It is basically antirock with an on road mode. 😁

[@sumdumguy7197]

Will they fit on a 2018 JK sport 2 door

[@JKGearandGadgets]

Yes

[@sumdumguy7197]

@@JKGearandGadgets thanks 😊

[@sumdumguy7197]

I have brackets on my front differential and stock sway bar links, total length of about 9"s, local 4×4 shop is trying to sell me MC disconnects that are 12.5" s, they say they will fit, but I'm not sure, any thoughts