Jeep Wrangler JK Omix ADA Hard Top Seal Kit (2011-2018) Review & Install

Shop This Omix ADA Hard Top Seal Kit: terrain.jp/2SL...
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Fix the old worn out seals on your Wrangler's hard top with this Omix ADA Hard Top Seal Kit. This very affordable kit will replace all 13 seals with a quality foam and 3M tape construction to make sure your cab area stays dry and to prevent any leaking. terrain.jp/2SL...
Item J113485
MPN# 68026937AB
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/...
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterr...
#Wrangler #OmixADA #HardTopSeal

[@extremeterrain]

Shop This Omix ADA Hard Top Seal Kit: terrain.jp/2SLaTtD Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

[@tenchu0siris]

Just installed this kit in my ‘13 JKU. This tutorial helped tremendously and I found that the two solid rubber ‘tubes’ that comes in this kit go inside the passenger side gasket, one on each end where the two freedom panels meet. Now to see if it stops my driver’s side A pillar leak. 🤞🏽 0lllll0 👋🏾

[@extremeterrain]

Fingers crossed for you! And if all else fails, just pull your floor plugs!😉 -Zach

[@mattlawson5352]

You should post a video showing where you placed them on your page

[@zitiziti]

Can you post pic or video of how you used those tubes

[@susanb374]

Thank you! I found that one side of my gasket has no tube in it at all.

[@ghostman76015]

My drivers side A pillar leaks too and it appears the door weather stripping isnt pressing up against the A pillar weather stripping when the door is closed. There is a gap there where the water flows down. Strange that I didnt have this problem on my soft top but hard top is more leak prone lol.

[@VincenzaV1]

Who could do a thumbs down on this video? It's professionally made, clear, concise. Man, a lot of haters on the internet! Thank you for making this video. We don't get any instruction with the kit, so if a seal is missing or damaged beyond recognition, your video helps a lot!

[@chandlerfoltz9154]

What the hell you do with the hoses

[@dmacko]

Thank goodness for this video. I bought a used 2016 JK and experienced my first leak. I noticed several of my foam seals were missing. This video helped show me where and how they are put on. Thank you.

[@extremeterrain]

Thanks for watching and for the kind words, David! We're happy to help! -Zach

[@haroldbrown3452]

you said take the top off, had me worried, lol. all you need to take off is the freedom panels. great video

[@MrSupergee]

Thanks for posting. Will be doing it this weekend on my 2012 JKU. I might sharpie around the old seals to get the outline exact before putting on the new ones.

[@VincenzaV1]

Did it with pencil....

[@jackstorey9920]

Neither thumbs up nor down. For the most part, it’s a good video. However, there needed to be a pause and a close up on the odd shaped foam pieces… especially the part where it overlaps with another piece. Hands were in the way and video moved too fast for me to see exact placement. Mine did not overlap but rather butted up against one another. Sure hope it works, because I was at a loss. Also, my kit came with two small solid tubular rubber pieces and one larger one with a hole running through it. Kept waiting to see where those go. Still waiting.

[@susanb374]

Thank you! I looked all over for the info on this. I bought the same brand kit and was shocked there were no directions, and extra parts. It seemed too easy to be true, but yup, it's that simple. Read below where the small tubes go and I read on a Jeep forum that the large tube goes into the header on the jeep, sort of over where the rearview mirror is. I'm going to install this tomorrow. I hope it works!

[@extremeterrain]

You are so welcome! Thanks for watching! -Zach

[@nicohovse4204]

From what others have said and looking at my previous seal. Here is what I did. All dry so far. kzbin.infoL6UuWXKzSpg?feature=share

[@07fosho]

@@nicohovse4204 thanks

[@Lindsay_PLK]

Does anyone know where the two thinnest strips of foam go? The ones that are maybe 10mm wide?

[@susanb374]

@@Lindsay_PLK Were you able to figure it out?

[@jeepercreepers54]

I like the handy clothes rack in the way of the hard top knobs.

[@G_Body_Queen]

Just installed this for my 2018 JK

[@extremeterrain]

Nice! Hope you enjoy the new seals! -Zach

[@adrianmbanks]

Hi Ryan. Can you tell me what that silver bar on the roof mount is (where the light and twist locks are)? It looks like a it's for strengthening

[@extremeterrain]

Not quite sure... We don't offer it on our site. It definitely looks like a grab handle if that helps your search!

[@White.Elemant]

Next time maybe put the panels on the table as they are when installed. And slow down, it's really, really hard to keep up with which corner you are doing. Also, OEM set has two lengths of straight tape, it would be nice if this was adressed here (if omix ada has that feature too, which it seems to).

[@alexandriabro23]

Hello, can I buy this set and use it for an 07 jeep wrangler??????? I can find any packs listed for an 07 but assume they are the same anyways. Any insight would be helpful, i'm doing this myself! :)

[@jorgeorejarena]

Where can i get the track bar on the sound bar? @extremeterrain

[@Behind_the_Lens_Photo]

bout to do this now thank you so much for this video n very great instructions

[@extremeterrain]

Thanks for watching! -Zach

[@justthegoodlife]

Can I use this for a 2018 JLU or is there a kit for a JLU? I’m getting a lot of rattling from the freedom panel latches

[@jenniferjewiss4691]

This video was extremely helpful. Thank-you!

[@extremeterrain]

Thanks for watching! -Zach

[@Bmbwic]

Hey where did you get that grab bar for your sound bar? Is it available in black?

[@johnbush6436]

I'm just now seeing this and wondering the same

[@wilcorregidor]

Thanks for the video!! This was a lot of help!!

[@extremeterrain]

Thanks for watching! -Zach

[@waynefilkins8394]

My passenger side panel is filling up with water. Then while I'm driving it leaks out of the panel into the jeep. Will these help with that?

[@extremeterrain]

Replacing your hard top seals with these will be a good start! -Zach

[@sovereignmercy1]

Where did you get the long grab handle for the soundbar?

[@jaaplyler]

That's what I want to know. Did you find it?

[@NikolayMarkovLaw]

Following. 😊

[@ljose1585]

I click on link for the item foam blocker seat kit and it says 2011- 2014 only on your website I have a 2015 jeep wrangler. Will this item work as well

[@CALIKID90603]

Who makes the sound bar grab handle???

[@extremeterrain]

I believe this is an ATP (American Trail Products) grab handle. I listed a link to the ones we carry on our site!! www.extremeterrain.com/atp-rear-billet-grabhandles-0717-jeep.html

[@CALIKID90603]

Oh, I meant the center grab bar that attaches to the sound bar by the center dome light.

[@moejazi]

What are those black soft things in the middle of each roof panel?

[@thomasmorissette]

Do you know where I can find a seal kit for my 2010 hardtop?

[@christina56536]

Thanks!!

[@hassanmadi7042]

Would these fit a 2017 Jku Willy’s 4dr

[@nathanhenderson9807]

What handle is that for the center soundbar grip? Something commercially available or custom? Thanks for the vid! Helped with some questions on placement for my kit. The panels were missing some seals, so hard to copy original.

[@extremeterrain]

Glad the video was helpful! In all honesty, I don't have any records of what specific grip in on the sound bar like that but it looks like its part of a set that the owner had. We offer something similar from Rugged Ridge, just not aluminum like you see in the video. Thanks for watching! - Zach terrain.jp/2PtngG6

[@philv930]

They are RaptoWorx Not worth the money for what they are. raptoworx.com/jeep-jk-grab-handle-center/

[@stevestewart3816]

What are those pads in the middle of the panels? Does that help with condensation?

[@extremeterrain]

That is the customer's hard top insulation on their build that we borrowed for this install. That is not included in the Hard Top Seal Kit. However, if you need some better noise dampening and insulation we have them available on our site!

[@mlawson2389]

Instead of replacing, would just sticking them Over the old ones for Added thickness work as well?

[@extremeterrain]

I would recommend just replacing the seals instead of layering. Adding too much of a seal may result in gaps and let in more rain/wind noise. Plus I don't think the adhesive would still well to the existing seals. -Zach

[@veesoho93]

Thank you !!

[@extremeterrain]

Thanks for watching!! -Zach

[@haroldbrown3452]

why cut away after you put the gaskets on , why not wait for 1 sec so we can see each corner as its complete, you cut way while your hands are still in the shot. better editing .. come on man

[@bapeking718]

Will these fit my 07 unlimited Hardtop? Can’t seem to find any others for my year. These do seem to match up perfectly. They look identical to my old worn out ones. Hope these can seal the deal if you know what I mean. I have a small leak due to old seals.

[@extremeterrain]

Since this is an inexpensive kit you can always give it a shot! The manufacturer only specifies it fitting 2011-2018 models though, so we really can't guarantee fitment. -Zach

[@jimbo251987]

My 07 has the same style freedom top idk why it wouldnt

[@chrisb3976]

They will work on older models. Keep in mind the foam is form fitting, I just got this kit for my 2008 JK soft top.

[@crowraven7919]

Do we need butyl? Or is that for older tops?

[@extremeterrain]

You don't need to purchase this if your seals are in good condition. If you're experiencing leaking or they're worn out, then this may be a good kit for you!

[@gabedaxe477]

Clear silicone works better

[@vinylholicsanonymous3871]

As in sealing it down permanently?

[@adamperez1621]

What tires and wheels are those?

[@extremeterrain]

Those are Black Rhino's Madness 17x9 wheels, with Nittos Open Country R/T tire! We don't carry those tires, but you can purchase the wheels from us at the following link! Thanks for watching! -Zach www.extremeterrain.com/black-rhino-jeep-wrangler-jl-madness-dark-tint-machined-wheel-17x9-1790mad-25127m71.html

[@jpotts345]

Is this really all u have to do? Seems like there should be more to it than this

[@extremeterrain]

For the hard top seal kit shown, this is all you have to do! -Zach

[@mallakiNY]

will it fit soft top as well?

[@extremeterrain]

These seals are for the 2011-2018 hard tops only. Check out the following link, its to a soft top seal kit that we offer. Hope it helps! -Zach www.extremeterrain.com/omixada-soft-top-foam-tape-seal-kit-1018-jk.html

[@mustangenthusiast]

Jeeps would be good if toyota designed it

[@Wezi427]

As a JK owner I agree.

[@mustangenthusiast]

@@Wezi427 haha JK owner here as well. Drenched in water every time the frame flexs 😂

[@Wezi427]

@@mustangenthusiast I usually go through this every couple years. I currently have a leak on the driver's side and passenger side. I'm having a hard time pinpointing the root of it.

[@commentpolice1]

This video tells you nothing

[@Lindeboom6.1]

Terrible Video …