Jeep Wrangler JK Raxiom Control Box with Switch Panel Review & Install

Shop this Raxiom Control Box: terrain.jp/30b...
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Now you can easily control auxiliary lights and/or 12V accessories by installing a Raxiom Control Box with Switch Panel on your 2007-2018 JK. Mounting above your rear view mirror, the Switch Panel contains 6 heavy duty, lighted rocker switches and a center mounted digital LED voltmeter that allows you to keep a close eye on your battery's power.
Raxiom assemblies their Accessory Controller from all Solid State components. This Kit features a switch panel, circuit breaker and wiring control box. The control box is epoxy potted making it water and shock proof with the ability to withstand temperatures of up to 250 Degrees F. terrain.jp/30b...
Item J131127
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Facebook: / extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, YJ and Gladiator!
www.extremeterr...

[@extremeterrain]

Shop this Raxiom Control Box: terrain.jp/30byYLR Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

[@williamriversiatse835]

I installed this a couple months ago, all the lights on the pod under the hood stopped working, but the cabin lights work. Checked all fuses, any ideas what the problem could be?

[@xblackjeepx]

Meridith with the fresh ink!

[@extremeterrain]

Yes sir! :) - Merideth

[@adrienrivero4375]

Switch panel is on all the time. Is this how it should work?

[@williamschildwachter9264]

Really like how she slams the fuse box lid on the wire. Good way to sheer apart that wire. And I’m not to sure about installing this onto the PCM can it be mounted some where else.

[@DD-zv1jg]

A few inches of black tape around the wires on the back of the switch panel would clean up the install.

[@RibeyeconAdventures]

Recommendation--plug the fuse into M9 or M3 so that the switch light is not on all the time. Also, recommendation--paint the switches black. Driving at night, the blue lights on the switches are obnoxiously bright and distracting. Also, recommendation--throw away the double-sided 3M tape and screw the Switch Panel in. Besides that, a solid product.

[@ziLLoDxD]

Just put this on my Jeep is it going to affect my battery if I follow her instructions with the lights staying on when the jeeps off?

[@sanjoecj]

That was a pretty intense intro! My phone almost flew! 😂

[@joycebaker603]

I am a 71 year old woman that is doing alot of my own modifications. I bought a switch panel to be installed when it warms up. I must say you are the only video to explain what to do with red wire to attach to fuse box. Mine says to use m6, just different company, I was pretty sure what to do with it but thanks for really showing me.

[@extremeterrain]

Anytime, Joyce!! Thanks for watching! -Merideth

[@artbyramses5143]

Is it supposed to stay on even when the Jeep is off?? Mine shows the center volt counter on the circle screen even when it’s off help

[@davelamb3303]

Great install video and looks like a quality product, this is on my Christmas wish list. Cheers!

[@extremeterrain]

Glad you enjoyed the video! - Merideth

[@RegularTennesseeJoe]

Seems like the voltage meter on all the time would drain the battery.

[@billycallahan3338]

Does the bracket on the footman loop interfere with the hard top?

[@chestermejia321]

Looks awesome and great price. Nice new ink too.

[@keithcastle879]

So I have mine installed but my lights stay on. With switch on they are on full blast, with switch off they are on but very low. Any suggestions?

[@Weirdracin]

Actually you don't need to cut into the header panel or have the wires pinched coming out of it to the right of the loop like you did. You can of run it hidden behind the panel to the top secure loop,. Then slipped it down thru the center of the loop to the outside & run it to right a couple inches & it would then be plugged into the switch panel & be behind the switch box. At least with a soft top for how it did it.

[@MrRebTyree]

Awesome install video. Hopefully it will work out for a 2011 JKU. We'll done!!!

[@extremeterrain]

Should work out perfectly on your 2011! Thanks for watching! -Zach

[@seithlovelace1482]

I have manual 2013 JK. At the 6:00 mark, the wire is inserted into the cab, there isn't anything there for me to push past. Just a hard plastic peice with no wiggle room whatsoever. I'm seeking help on getting the wire into the cab please without considering something crazy like drilling.

[@jamminjeeper5854]

How does the quality compare to say an S-Pod set-up?

[@AustinH7]

Ah so this is the brand spamming me with ads on KZbin 😂 “light up the night with Raxiom lights for your Jeep Wrangler”

[@nazairetetreault181]

Butt connectors get loose an create high resistance

[@alaskankare]

As always, you explained everything so well with how to install. My only question is that it looks like you will need to do electrical deconstruct if you had other plug and play switches? Or does just installing the item leads to the back make it tied into the switch? Thinking of a bull bar with intergrated light bar.

[@extremeterrain]

Everything from the control box is already tied into the switches! So, the negative and positive leads on the light bar you're looking at would just need a spade connector to be installed (that's included in this kit), and then you would just need a screw driver to attach them to the -/+ connectors on the control box for the particular switch you want the light bar on. No additional wiring needed and it keeps it super organized! Hope this answered your question! :) - Merideth

[@MrRebTyree]

Awesome install and looks like an awesome product!!! Considering it for my 2011 JKU Sport 4dr.

[@richardlow7962]

Will this unit fit the Australian RIGHT HAND DRIVE model please ? ? ?

[@quickisgod]

Intersting how they didn't show her tightening the screws that hold the switch panel in place. It's not as easy as just pushing the rubber up out of the way. I came here to see how they expect you to tighten those two screws, and of course it didn't show that part.

[@GenghisCohn1]

meridith, i purchased this box and switch for my 08 jk and got to putting the switch panel on and it doesn't fit , got any solutions for me before i start cutting to jerry rig it

[@josepalacios3446]

stays on, the voltmeter and the switch lights do not turn off

[@tylernewkirk6498]

I bought an installed this and I love it I’m curious to know if it’s constantly on and glowing even when vehicles off will it drain your battery ???

[@brandonschneider3728]

What did you end up doing with it ALWAYS on cause mine is always on as well. Just finished installing and realized with the Jeep off it’s always glowing? Also the bar over the footman loop she kinda explained how to tighten it but never showed the physical action in the video, I had to use needle nose plyers.

[@DannyPrak]

My raxiom stays on when car is turned off and keys are out what am I doing wrong?

[@dilloncallahan8334]

Can I mount in other locations.. I have a abr aircompresser in the same location and don't want to move it.. can it install over top the compressor or in any other locations?

[@MrAspire5920]

Dig it.

[@johntaijeron1137]

I just installed mine on my 2017 JK, the volt meter stays on all the time, is that normal?

[@oathkingdom22]

Switch it to m15 I just installed it as well and m15 is a multifunction fuze and it'll turn off Everytime the key is off m2 leaves it on all the time

[@johntaijeron1137]

Yup, switched it after the install…works perfect now. Thanks!

[@WCTVideos48]

So I noticed when I installed this the blue lights on the switch and voltage meter are on constantly? Will this effect my battery at all? I have went over and over and everything is hooked up correctly. Just curious, thank you!

[@RibeyeconAdventures]

FYI, instead of plugging it into M2, I have it plugged into M3, also saw on their website, someone recommend to plug into M9. Plugged into M3 or M9, the panel lights up only when the key is in the ignition and vic is turned on. ... Not sure why instructions instruct us to plug it into M2 and have it lit on all the time... battery drain, common sense.

[@chillinwithcam7392]

Does this switch panel come with labels?

[@williamriversiatse835]

No

[@andrewpleger488]

Do aftermarket rocker switches attach to the unit?

[@extremeterrain]

This size switch is pretty universal, so you should be able to swap them out! - Merideth

[@TheMrhill88]

Can this be used without the key in the ignition. If I want to have rock lights or rgbs on?

[@williamriversiatse835]

Yes if you hook it up to trailer fuse like in the video

[@adrienrivero4375]

Just installed but panel is on all the time. Is this how it should work?

[@oathkingdom22]

Switch it to the m15 fuze slot the m2 stays on all the time

[@blackdiamondrob]

the boxxy look is so dated looking. im glad i went with voswitch for my jk, much cleaner modern look

[@mbaxter73655]

Is there an option for more circuits? I’d like to have 8.

[@Rubi-gc4xm]

Yep, Buy 2

[@tileman17]

my only thing is I want the lights to be red, have a tank green jeep, and will have a tan top so blue doesn't go

[@biggler4324]

Will this fit on an 09 unlimited,

[@extremeterrain]

Yes it will! -Zach

[@biggler4324]

Thank you!

[@munecito]

Am I the only person that thinks the battery is shot? Barely 10V.

[@tlaw4908]

Great video but the 80's porn music has to go.

[@alaskankare]

80s porn music? lol not gonna ask how...

[@matthewmiller1481]

J

[@BootLegGarage775]

Hi good video. Check out my video on the MLC-6 thanks. Let me know what you think.

[@josepalacios3446]

stays on, the voltmeter and the switch lights do not turn off

[@oathkingdom22]

Switch it to m15 fuze slot that'sent for the multifunction switches the m2 will stay on all the time