Jeep Wrangler TJ Build - Rig Setup & In Depth Walk Around Jeep Tour + Mods

Here’s my current jeep build walk around! Still currently under construction! New mods happening almost weekly! Stay tuned
Thanks for watching
Official ATEM OFFROAD’s Super Store
www.amazon.com...
In depth video Filter for each mod and build
#jeepbuild #jeepwalkaround #jeeptj
More Awesome Content?
DIY Overland kitchen Tailgate table
• DIY Jeep Wrangler Tj ...
DIY Bolt On Hi-Lift J-Mount Install
• Video
DIY Front Stubby off-road bumper
• Jeep Wrangler TJ - DIY...
DIY Body Lift
• Jeep Wrangler TJ - DIY...
Jeep front and rear shock replacement
• DIY How To Replace All...
Sway bar quick disconnects
• $20 DIY Jeep Sway Bar ...
Overland Tool mounting Solutions
• DIY Overland Trail Car...
Jeep Tailgate table build
• DIY Jeep Wrangler TJ T...
DIY Jeep Rock sliders
• DIY Jeep Wrangler Rock...
How To Install cb radio in Jeep Wrangler
• How To Properly Instal...
32” tires I’m running
• 32” Tires On My Jeep W...
DIY On board air compressor build
• Jeep Wrangler Tj | Lj ...
Fuel and water cell mounting Solutions
• DIY Overland Jeep Wran...
DIY Rear Trail Cargo Rack build
• Jeep Wrangler- DIY Ove...
Hi jack hood mounts install
• Jeep Wrangler How To I...
Wireless winch controls
• How To Install An Opti...
DIY Jeep E Fan build
• DIY JEEP WRANGLER Elec...
Overland rig walk around video filter
Procomp suspension 0:25
DIY anti sway bar disconnects 0:35
DIY sway bar shifting fix 1:05
Front axel info 1:45
Front bumper and winch 2:00
Jeep grill black slot inserts 2:50
Led headlights 3:00
Hi jack and mounts 3:35
Mud tire and wheel setup 4:47
My Dana 44 rear end setup 6:50
Whats Under the hood engine bay 7:49
DIY on board air compressor 9:37
DIY rock sliders 10:01
DIY LED lighting setup 10:45
Fuel and water cell mount Hooke road 11:05
DIY rear Cargo Rack & tool mounting 11:35
DIY tailgate table tire carrier 12:20
DIY Jeep Interior mods 14:00
DISCLAIMER
Due to the factors out of control by ATEM OFFROAD, we cannot guarantee against improper use or unauthorized modifications of this information ATEM OFFROAD assumes no liability or responsibility for property damages or injuries incurred as a result of any information contained in this video. Use this information at your own risk . ATEM OFFROAD recommends safe practices when working on vehicles and or with tools seen in this video, any injury damage or loss that may result from improper use of these tools equipment or from the information contained in this video
Is the sole responsibility of the user and not ATEM OFFROAD. Be Safe
This video and description contains affiliate links which means if you click on one of these product links, I’ll receive a small commission.

[@ATEMOFFROAD]

Fast FWD Option: Overland rig walk around video filter Procomp suspension 0:25 Rough country track bar and mount 0:25 DIY anti sway bar disconnects 0:35 DIY sway bar shifting fix 1:05 Front axel info 1:45 Front bumper and winch 2:00 Jeep grill black slot inserts 2:50 Led headlights 3:00 Hi jack and mounts 3:35 Mud tire and wheel setup 4:47 My Dana 44 rear end setup 6:50 Whats Under the hood engine bay 7:49 DIY on board air compressor 9:37 DIY rock sliders 10:01 DIY LED lighting setup 10:45 Fuel and water cell mount Hooke road 11:05 DIY rear Cargo Rack & tool mounting 11:35 DIY tailgate table tire carrier 12:20 DIY Jeep Interior mods 14:00

[@raulgil7389]

Your Jeep looks awesome. It has the necessary mod/upgrades. The mods give your Jeep a clean fit and it doesn’t look heavy and overwhelming. Good job.

[@ATEMOFFROAD]

💥 I appreciate that! thank you for watching cheers!

[@cgonzo801]

That CF wrap looks great I would leave it but that's me , you got a nice set up that has been working for you .

[@ATEMOFFROAD]

Thanks buddy, I appreciate it. I am putting together a total parts list for anyone of you guys who wants to know more on this budget build , all the parts on this build are budget oriented I do recommend shopping around to find the best price, I will list links in the description box below, cheers!

[@stephenhunter6507]

I like the simplicity of your mods. I have a 98 TJ. You have some good ideas.

[@ATEMOFFROAD]

💥 nice, thanks for watching I really appreciate it!

[@tariklaarej2259]

Your slider are amazing

[@gldsmith61]

Man I love that bumper setup, good choice.

[@ATEMOFFROAD]

Thanks you , I appreciate you watching. Cheers

[@KathysOutdoorAdventures]

I love my little jeep. We are hoping to build her up and be able to take her on "easier" trails Nice setup!

[@ATEMOFFROAD]

Can’t wait to see it, show us when it’s done! Cheers

[@ONE_GEN_X]

I totally agree about the rad upgrade. I wish I would have kept my stock one even though it was plastic

[@ATEMOFFROAD]

Yeah the oem radiator is great for the jeep IMO! The cheap deep fake aluminum radiators on eBay I’d stay far away from those! Thanks for watching 🍻

[@gabrielnicolas824]

Very Nice build … I’m in the process of building mine !!

[@ATEMOFFROAD]

Thanks for watching, I appreciate it! 🍻

[@mikebryant8082]

Dude! Nice job! Just found this while looking for ideas...

[@ATEMOFFROAD]

Thanks for watching 🍻

[@SteveJud43]

Sweet jeep!

[@ATEMOFFROAD]

Thank you 🍻

[@MajorWeakness]

Nice, I'm working on an XJ overlander so this gives me inspiration, I just installed the RC seat covers, I've got a video on that.

[@ATEMOFFROAD]

Major Weakness 💥 nice, and thanks for watching, you may like my next Video, coming real soon. Cheers!

[@ATEMOFFROAD]

Major Weakness Jeep Wrangler TJ - How To Fix Popping Sound When Turning | Bad Track Bar Tuning Heim & Ball Joints

[@4-WHEEL-DRIVE]

i think you should get the gear box guard if you hit any rock

[@ATEMOFFROAD]

That’s a good idea, I’m thinking about making one

[@RubiKidd06]

Nice rig.

[@ATEMOFFROAD]

We TJ nice , I appreciate it , thanks

[@ASTHECROWFLIESHIKING]

Awesome setup. Looks like fun. Great video and channel. Subscribed. Crow✌️

[@ATEMOFFROAD]

Nice , I appreciate it, cheers!

[@MrCee-eq9fe]

Nice Jeep dude I also have a 97 I have a couple vids on it also making an update one soon. Just subbed 👍🏽

[@ATEMOFFROAD]

Mr. Cee nice, thanks buddy I appreciate it. I’d like to see your jeep video too, cheers!

[@jamesdodson9417]

Nice rig man , if you don’t mind me asking what is your top speed with your tires ?

[@ATEMOFFROAD]

With those tires about 65mph with 4:10 gears up hill, much slower. 🍻

[@foxxy_the_gladiator6639]

🙌🏽

[@ATEMOFFROAD]

Thanks for watching, I appreciate it 🍻

[@reedcarpenter2994]

What is your opinion on the 4 cylinder? Any issues pulling using the winch or trailing? I have one but mainly use it on the road.

[@ATEMOFFROAD]

I think they are great capable Jeeps and the main difference between the 4.0 is they are way lighter and that makes a big difference on obstacles. Other than that they can be built to be just as capable as the 4.0l. But apples to apple the 4.0 is a better jeep more power and stronger transmission. 4 liter lacks power climbing mountains at high speeds, but in 4lo with the axle disconnected they are crawlers. Flat land towing ok not up hills, yes have a winch and don’t forget to use it🍻

[@juanpablogarciaescobar5625]

nice video

[@ATEMOFFROAD]

Thanks for watching

[@darrinnelson241]

Great channel dude....I have a 2006 LJ looking to add mods....interested in learning about your mods with your spare tire from start to finish...where might I view that?..Watched the ra k build but where do I start as far as the bar coming up behind tire

[@ATEMOFFROAD]

Thanks for checking out the channel, the rear tire carrier already comes with the square tube of on the back of the spare tire. A lot of my mods have been designed off the tube back there, for instance my awning and my bike rack! If you have already checked out the rack build maybe head over to the awning build and fuel water cell mounts video. There you can see more of the build. Thanks for watching 🍻 DIY Overland Jeep Wrangler Water & Fuel Cell Jerry Can Mounting Solutions ( Hooke Road ) kzbin.info/www/bejne/aXzaqoGgisp_jpY DIY Overland Trail Cargo Rack Tool Mounting Solutions (Quick Fists) kzbin.info/www/bejne/n3aYc2Wgrd-Urdk

[@brycens_garage]

Hey I saw your running the same headlight as me how were you able to 2 little bars to work? What wires should I look for

[@jakeniemasz6261]

Did you notice any additional power with the electric fan ?

[@ATEMOFFROAD]

Just quicker throttle response, that was about it. I liked the mod personally, but if I were to do it again , I would buy the flex a lite kit out right! That radiator and fan I used turned out to be junk for the money I paid for it not worth it, my factory radiator lasted about 10 times longer than that aluminum one! Stay away from deep fake radiator! Thanks for watching cheers

[@mauricio5763]

I’ve been driving my 97 tj without sway bars because the left side sway bar was rubbing into my frame as well. Where can I get the clamps you have to keep it from moving? TIA

[@ATEMOFFROAD]

Nice , I got those clamps on Amazon , but I think you can get them from eBay too, I believe there 1” 1/16” two pieces set collars but just double check and measure the o.d - just to be sure! Thanks for watching

[@jeffvalenzano4220]

Hi how do I get to your link for your led headlights ? Thanks

[@ATEMOFFROAD]

amzn.to/3p9PYi7

[@Themoneymaker0129]

Hey man where did you get the vinyl wrap for the hood? Love your TJ

[@ATEMOFFROAD]

Themoneymaker0129 💥 nice, thanks for watching, the vinyl wrap I purchased from an eBay seller , this one is 5D carbon fiber black 60x72 but I will be doing a video very soon on replacing it to 7d , never worked with 7d but before you buy might want to check out that video, coming real soon Cheers!

[@Themoneymaker0129]

ATEM OFFROAD absolutely man! I am subscribed and will be waiting. I need this for my TJ.

[@Thegravyipass]

How’s your MPG with the four cylinder, 4.10 gearing, and the 32” tires? Nice rig!

[@ATEMOFFROAD]

💥 nice, thanks for watching, I appreciate it! The gas mileage is not the best compared to new vehicles today, but I can’t complain this jeep gets me places no Tacoma can go😂😂Maybe mpg 12-15! Didn’t really notice the difference between 31-32” tires!

[@Thegravyipass]

@@ATEMOFFROAD, that's not bad at all! I'm on the lower end of that with my 4.0L inline six. And just like yours, it takes me to places Tacomas couldn't get to haha. 🚙

[@ATEMOFFROAD]

Nice , the AMC 4.0 is champion of pushrod engines! Cheers

[@jimmylanders2693]

i bet its real slow with a 4 cylinder and all that extra weight.

[@bmorsh]

Sway bar not anti sway bar

[@ATEMOFFROAD]

😂😂 nice catch , thanks for watching 🍻

[@tonyteresa8145]

need more neg offset on wheels to keep from rubbing, spacers suck

[@ATEMOFFROAD]

Tony&Teresa 💥 nice, thanks for watching! You are exactly right , I need different wheels a good combination of offset and backspace would be the perfect fix for this! , I am really thinking about going back to 31” tires but I do like the 32”! Cheers! 👋

[@tonyteresa8145]

@@ATEMOFFROAD I have 33/12.50s with 15x8 wheel on mine with a -19 offset no rubbing

[@ATEMOFFROAD]

@@tonyteresa8145 thank you for this info, will be very handy on my next wheel purchase! Cheers

[@clarkdrago]

How did you put that vinyl on the hood? My hood has a horrible paint job and needs something like that

[@ATEMOFFROAD]

💥 nice, I stripped and cleaned everything off of the hood , removed the hood then had a assistant help me lay the carbon vynl sheet over the hood and I carefully spread the vynl over the enter hood using a plastic puddy spreader with an straight edge and a heat gun, you will want to use 72x60 “ sheet this was plenty and 5D pattern, but you can also use 7D depending on the pattern you like it’s thinker material, if your particular about the outcome, the more time you spend the better off you will be, hope this helps , thanks for watching! PS Also I recently just painted my hood , if you watch my hood louver install I go over some painting details you may water to consider watching that too, thanks

[@clarkdrago]

@@ATEMOFFROAD Thanks for the detailed reply! I'll definitely check out the video you suggested.

[@hispurposehisglory5433]

What is the back spacing in your rims?

[@ATEMOFFROAD]

@His Purpose His Glory, I think 3.75 or 4” one of those, thanks for watching

[@hispurposehisglory5433]

Thank you!

[@Yipping_Yeti]

how did you mount the compressor?

[@ATEMOFFROAD]

Shock Doc 💥 nice thanks for watching! I appreciate it! Here is the link to the compressor setup kzbin.info/www/bejne/a4uqfXSmZrJ9ipo

[@Yipping_Yeti]

@@ATEMOFFROAD thanks man I appreciate it. I have the same compressor. It just gets so damn hot its a pain to store once you finish using it. Good pump other than that. Thanks for the quick response! I will check out the other video...

[@ATEMOFFROAD]

@@Yipping_Yeti I just used it this last weekend worked amazingly! Gets hot, but man can’t beat the price! I let it stay hot under the hood, haha Cheers buddy!

[@mcfly4207]

Haha I’m 420