Here's how I freshened up the window trim of my 2000 Jeep Cherokee XJ. A little detail goes a long way!!! Clip credit to Seinfeld - "Look away, I'm Hideous"
Пікірлер: 99
@puertorock082 жыл бұрын
Dan your the man I just picked up two xjs I saved from the scrap yard one is a wreckedj after watching you save one I couldn’t let it go. I wish you were my neighbor lol. Keep up the good work and great content. Your the man!
@ProjectDanH2 жыл бұрын
Thanks brother, keep them XJs alive!
@arpunk Жыл бұрын
Thanks for the video. Very helpful when it came to removing the moldings. I opted to strip, sand, and polish mine. I didn’t realize that you were able to remove the upper rear molding without having to drop the division bar. I loosened the 10mm bolt behind the door trim and the screw at the top of the door so I could move the division bar down enough for the molding to clear it but maybe I’ll try your method for the other side. Don’t need to worry about scratching the molding paint since I’m stripping it.
@wl30165 жыл бұрын
Thank you! Was just thinking about how to tackle this problem..... solid work, keep it up!
@ProjectDanH5 жыл бұрын
Awesome! Thanks man! Make sure it's very clean before you paint it! Primer may be a good idea too
@Lynxith5 жыл бұрын
LORD that is a stupiddddd clean jeep man, props for keeping it clean and out of the mud and rocks!
@ProjectDanH5 жыл бұрын
Thanks man, much appreciated! She's my daily so I gotta keep her top notch! I was thinking of a walk around video soon. Thanks for watching!
@DoPeTz3 жыл бұрын
Thanks Dan! Was able to restore my window trims on my 1993 2-Door XJ. Was pretty difficult to remove the peeling paint even with paint stripper! Ended up scratching off the metal with a blade then sand it flush cause I was too impatient 😂Earned a new subscriber!
@ProjectDanH3 жыл бұрын
thank you! glad you got it done! 💪💪
@WILSON.14 жыл бұрын
Excellent job!
@ProjectDanH4 жыл бұрын
Thanks Wilson!
@boydrobert4644 жыл бұрын
Well this just made my night, mine is peeling bad and was wondering how to approach this, and im even pretty auto savvy myself lol. Great video nice job, looks awesome, Exactly what I wanted .👍👌
@ProjectDanH4 жыл бұрын
Thank you! I would highly suggest a stronger paint. The crappy auto zone stuff i used started scratching over time 😒
@ericche19833 жыл бұрын
Awesome video! huge help!
@ProjectDanH3 жыл бұрын
Glad it helped!
@jeepinpete40164 жыл бұрын
I have identical trim problems. This is my weekend project, thanks for the knowledge. It looks great!
@ProjectDanH4 жыл бұрын
Thanks man! FYI. If I had to do it all over again I would have used a better quality paint... definitely find something more durable than that duplicolor junk. Lol
@jeepinpete40164 жыл бұрын
@@ProjectDanH I was thinking of using a self etching primer first. Might help adhesion. Then a few coats of good paint.
@ProjectDanH4 жыл бұрын
@@jeepinpete4016 that would be good! I wanna try it with por15 🤣 then while it's almost dry bit still tacky hit it with a Rust-Oleum top coat
@Schual293 жыл бұрын
Thanks, that´s what I was looking for.
@ProjectDanH3 жыл бұрын
Glad I could help!
@karlemmons93734 жыл бұрын
I have been wondering how I was going to correct the pealing of my Jeep window trim paint - I knew it was some sort of rubberized paint solution so wasn't sure it could be done - You are da man! Thanks - Problem Solved. Looks Great!
@ProjectDanH4 жыл бұрын
You bet!
@appleguy19865 жыл бұрын
Yeah, Buddy! I'll be doing this at some point. Thanks Dan!
@ProjectDanH5 жыл бұрын
HAHA, If I were to do this again I would use a more durable paint. It has shown some blemishes over the course of the year.
@slightlyoperational10235 жыл бұрын
You had me outside looking at my trim. Ha, came out excellent man.
@ProjectDanH5 жыл бұрын
Haha!!! After scraping all that trim I'v decided to stock up on trim every time I come across a good piece in the junk yard... much easier! lol
@GEARMOAUTO2 жыл бұрын
Great video. I have a 98 jeep Cherokee. Gonna do this. Thanks
@ProjectDanH2 жыл бұрын
Go for it!
@rogvelsan5 жыл бұрын
Simple but great tip earned you a sub
@ProjectDanH5 жыл бұрын
Thanks Rogelio! Much appreciated! 👊
@travisheasty77083 жыл бұрын
Thanks for the video! 9.5% here in good Ole Wellington Ks
@ProjectDanH3 жыл бұрын
Thanks for watching 👍
@minimonkey9694 жыл бұрын
For anyone thinking about trying this the best thing you can do is get some aircraft paint remover and slap it on the trim, the paint will come right of and u wont need to scrape with the knife or anything. Believe me the price is WAY worth the time saved if u have multiple of these pieces to do
@ProjectDanH4 жыл бұрын
That's a great idea... I never thought of that! Thanks for the tip!
@Deadbuck732 жыл бұрын
Harvested some window vent shades this weekend at the bone yard… I bet I should do this first… looks like a spring project…
@ProjectDanH2 жыл бұрын
Definately! Thanks for watching a Dan H classic!
@Deadbuck732 жыл бұрын
@@ProjectDanH anytime! I love your vids bro!
@Danielsoto9095 Жыл бұрын
I just came through this video, i used a bit of my flame torch and kind of heated a bit the old black plastic paint and it went off easy
@ProjectDanH Жыл бұрын
awesome!
@adambates49136 жыл бұрын
Very clean Jeep! I have a 99 XJ and am looking forward to project beach Jeep! May use some ideas for mine! Lol
@ProjectDanH6 жыл бұрын
Thank you! I already started filming the tear down of Beach Jeep and the next video will be a "before" walk around. At some point ill throw in a walk around of the Black Cherokee. Thanks again for watching!
@adambates49136 жыл бұрын
Awesome!
@agajohanna4282 жыл бұрын
I used the same dupli-color, but, after I took of the drivers side front and rear, I found the clips were crusty. Cleaned them up, but, had a hell of a time getting the bottom ones back in. so, when I did the passengers side, I just masked up everything and painted while on the vehicle
@ProjectDanH2 жыл бұрын
Good tip! Do whatever works!!
@d.bcooper99005 жыл бұрын
Thanks man, my xj trim is peeling as well, looks like an easy fix thanks again, it’d be great if you could pls let me know how you went about adding in your storage in the back?
@ProjectDanH5 жыл бұрын
Mr. Vega, I will definitely to an in depth video on my Utility box. stay tuned!
@addisonbrady87373 жыл бұрын
Nice work. I know this is not a video about standing water, but I went to my 99 xj this morning and both the front and rear passenger foot wells were filled with rug soaking water. It had rained here for 24 hours straight. Can you offer any advise on culprits? I didn’t see where the water had come in. My seals don’t look rotten. I went online to find a complete set to redo everything but all of them seem to stop at year 1996. That window sweep you took off at the beginning of your video seems to be impossible to find for a 99 xj. I’d greatly appreciate any suggestions since you are a master in this Cherokee field. Thanks Clint
@ProjectDanH3 жыл бұрын
interestingly enough most XJs leak on the passenger side. maybe new weather seals would help www.ebay.com/itm/360867776609
@powdere4donuts4 жыл бұрын
Hey Dan I was wondering if there's an alternative to buying door weatherstripping other thank RockAuto? On Rock auto they're $36.79 and Rear lift gate is $23. Would it be cheaper to get Home Depot ones?
@ProjectDanH4 жыл бұрын
Hmmm.. Not sure. I would rather but the proper part than take a chance with home depot stuff. The closer to OEM the better IMO.. Let me know what you do. Im Interested to hear your solution
@JesusGuerrero-fe3du4 жыл бұрын
Where. Did you find the tailgate spoiler? It looks. Nice on your jeep
@ProjectDanH4 жыл бұрын
Thanks! Spoilerlights.com
@joeytonetti25193 жыл бұрын
Hey Dan what is the name of the etching spay you used in this video?
@ProjectDanH3 жыл бұрын
I used the POR15 Metel prep and cleaner degreaser
@jasonvassallo66775 жыл бұрын
I have a 99 xj as well. Been wondering about what to do about that peeling trim. Looks like a easy job. Thanks! Btw. I only recently discovered your channel and notice you are from Long Island. Same here!! Where abouts you located? Looks to me somewhere in Suffolk... I’m in seaford. :) maybe we can meet up sometime??
@ProjectDanH5 жыл бұрын
If possible, try to replace the trim first. strip in and paint it as a last resort. Im out east in Shirley! wel definitely meet up one day!
@minimonkey9694 жыл бұрын
6:05.... big respect to this manz Would restoleum paint work ok instead of the window trim paint?
@ProjectDanH4 жыл бұрын
Thanks man! Lol. I would recommend a stronger 2 part paint with hardener. The stuff I used chipped too easily
@thomassylvestro90415 жыл бұрын
Dan thank you the awesome content. It is much appreciated. Does the rear cargo window trim come off the same way?
@ProjectDanH5 жыл бұрын
No, the side cargo glass is held in by a rubber gasket. On 97 to 01 the hatch glass is glued in like the windshield
@thomassylvestro90415 жыл бұрын
@@ProjectDanH Thank you. I need a header panel for my 2000 XJ have you ever bought Crown aftermarket parts. I curious how they would fit. Ant experience?
@ProjectDanH5 жыл бұрын
@@thomassylvestro9041 they should be fine. You can adjust your fenders to align the sides and you can adjust the radiator support bracket for the height. xJs are so simple.. that's why I love em!
@thomassylvestro90414 жыл бұрын
@@ProjectDanH On a side note, have you ever had any issues with oil pressure in any of your XJ's
@GEARMOAUTO2 жыл бұрын
It's been a few years has it been peeling / flaking at all?
@ProjectDanH2 жыл бұрын
Yeah, not too bad but I would recommend a stronger paint.
@alexmagers65953 жыл бұрын
Hey Dan, I noticed you didn’t touch the piece that splits the back windows. I’ve got some rust under there somehow - do you know how to remove/replace that part? Thanks!!
@ProjectDanH3 жыл бұрын
hey brother.. you have to watch my wreckJ rear glass video. you will need to find a new rear quarter glass and track online or at the yard
@alexmagers65953 жыл бұрын
@@ProjectDanH ah alright. Will do! Keep it up brochacho
@ProjectDanH3 жыл бұрын
@@alexmagers6595 will do!
@brandonx78863 жыл бұрын
Cant find anything on the rear window runner sweep trim .. can only find 97 and older replacements. Please help
@ProjectDanH3 жыл бұрын
your probably gonna have to hit your local junkyard
@Runswithfathog3 жыл бұрын
I wonder if my 2000 rubber window gaskets would replace my 97 metal trim?? 🤔🤔
@ProjectDanH3 жыл бұрын
maybe, give it a shot!
@tmkinnear4 жыл бұрын
Shit hot!
@ProjectDanH4 жыл бұрын
Thank you!
@user-zg8lk9yu6o11 ай бұрын
I was thinking about leaving them Chrome after I strip them
@MarineBand5524 Жыл бұрын
I just purchased a 92 Laredo, didn’t Jeep actually have Chrome on these? Mine really look like they could be. But someone put this black paint over them.
@swav1005 жыл бұрын
Illinois
@ProjectDanH5 жыл бұрын
Ouch! How much?
@nobsatthistime3 жыл бұрын
You need to hit Wall Mart for your Rattle Can Paint and Rock Auto for Parts. The Prices are somewhat easier to handle.
@ProjectDanH3 жыл бұрын
I love rock auto... hate walmart... its gross 🤣
@nobsatthistime3 жыл бұрын
@@ProjectDanH Wallmart has all types of rattle can paint now I was surprised at the selection, in Massachusetts it's all under lock and key. I agree Wallmart has a lot of crap too.
@ProjectDanH3 жыл бұрын
@@nobsatthistime 🤣🤣 just like beer or cigarettes, to purchase paint in NY ID is required ... so I always make stupid jokes like I drink beer , I don't huff paint
@nobsatthistime3 жыл бұрын
@@ProjectDanH Whos talkin about huff in Paint lol. Like the way you load movie clips into your videos, Makes Me lmao. Don't know how you find the time to hunt down just the right Clip. At 65 i just about know the Basics of using this Dam Computer.
@ProjectDanH3 жыл бұрын
@@nobsatthistime my brain is a quote library. 🤷♂️
@jipi186 Жыл бұрын
not in US in Canada/Québec 15.995% pretty much everywhere lol
@ProjectDanH Жыл бұрын
LOL! Thanks for watching
@christophermiller44132 жыл бұрын
Just a lil word of advice for anyone having issues with getting the rubber plastic coating off the trim. Soak it in 100% acetone. Thank me later it’ll just fall off after 30 mins or so.
@ProjectDanH2 жыл бұрын
Great Idea!!!
@equals-kl9hm Жыл бұрын
California
@jdssurf2 жыл бұрын
“ my twinkle”
@ProjectDanH2 жыл бұрын
😁😁
@jdssurf2 жыл бұрын
Can we not buy these parts?
@ProjectDanH2 жыл бұрын
Sure, look in a JY
@todhollandsworth43714 жыл бұрын
Didn't know how to fix the trim I've had a couple jeeps with bad trim....now that Corona dang it man be last thing I would drink www.walmart.com/ip/2-Bottles-Rose-s-Grenadine-12-Fl-Oz/799054248 get you some of this gives it a cherry flavor takes bitterness away about 3 to 4 drops
@ProjectDanH4 жыл бұрын
thanks man! this vid is 2 yrs old but i still be drinking my corona. 💪