Troy-Bilt front wheel drive LAWNMOWER BOTH WHEELS wont turn TRANSMISSION Belt problems HOW TO fix

[@ozone99]

Man that was an awesome video! All the other videos skipped the part on how to get the cover off of the front pulley. Even the owners manual skipped that part. So a virtual handshake to you sir 🫱 , I appreciate your help and have a great day!

[@JeffsLittleEngineService]

Thanks friend! I am happy it helped

[@ClipCentralUnbleeped]

Thank you for this! It was a quick repair once I watched your video. Appreciate you taking the time to post this.

[@JeffsLittleEngineService]

Glad it helped

[@ScottJ794]

Very helpful video. My belt came off, probably due to grass build up under the front cover. 9 screws holding that cover on. Ridiculous. I would advise anyone with this problem to try removing just the front cover first. That's how I did it, and I had no need to remove the blade and cover underneath.

[@solonguyen8836]

How can u see to put the belt in under the cover? It can slip on?

[@accountstube]

Thank you. Between the video and your comment, I made quick work of it

[@sewwithstyle9647]

Thank You, Jeff. My son and I watched your video, collected our tools and repaired our Troy-Built Walk Behind Ourselves.👐💪 I'm proud to say that our mower deck was free of grass and dirt build up and that we had the Satisfaction of the Repair and we saved our family the cost of the repair 🔧

[@JeffsLittleEngineService]

good job you can fix anything if you are thoughtful about it!

[@tomc1861]

I just ran into this problem earlier today. I attempted to check under the top cover but couldn't get it off. I was running out of daylight, so I just pushed thru it. I'm glad I found your video, you had the same mower as I do and now I know what to look for. Thanks

[@ronaldlewisjr.1634]

Thank you so much!!! This video was perfectly done, easy to follow, and helped me save my Mother from buying a new lawnmower! Thank you again!!!😀

[@JeffsLittleEngineService]

Great to hear!

[@jonevans7669]

Great video, exactly what I needed to see to get my mower's drive fixed!

[@thomasholland2669]

If you clean before you start work I find it makes it easier to find the problems. 5 minutes of cleaning!

[@sarahsindo4048]

Yes, it bothered me that he worked around the compact grass the whole time 😩

[@philliphall5198]

@@sarahsindo4048I try to have 5/6 jobs to wash at one time and let dry for the next day of work Clean is the best way to fix it

[@stinzz3]

💯

[@j.lietka9406]

Just about can't believe he didn't clean the front drive area, & didn't clean too well underneath!! 😱

[@Zach-r6j9g]

Would’ve had that mower cleaned like new before calling it fixed.

[@CarrieCass]

Thank you for this information! I had to watch a couple of times just so I got it right!! I couldn’t have done it without you!!

[@JeffsLittleEngineService]

good job!

[@kristopher_j9858]

Exactly what mine looked like. Thank you so much for the help. Should get the rest of the season on the belt, replace it in the fall. That way it’s ready for next season. :)

[@JeffsLittleEngineService]

Great to hear! Glad it helped, good job!

[@leebarker539]

Save a little time...play this at 1.5; every word is understandable. Helpful information.

[@fromtheheartlifesolutions2978]

Your video was beyond helpful because I have no experience with repairing anything with an engine. It took me much longer than you but I finally removed all the bolts and removed the cover seeing that the belt had come off. Thank God I did not have to remove the blade. Thank you so much for this video!!!

[@JeffsLittleEngineService]

Glad it helped

[@asl2mckays]

Good for you! Take all the time you need. ❤

[@chrisbarshick9598]

Saved me $600 - thought I was going to have to buy a new mower. Thanks Jeff!

[@JeffsLittleEngineService]

good job! Thanks for watching

[@banderson5676]

Thank you, my man. It's good people like you that post videos like these for the common good of humaninty. Really, thank you.

[@JeffsLittleEngineService]

Glad I could help!

[@accountstube]

Thanks man. I know this is a small problem, all things considered, but people like you make a difference

[@JeffsLittleEngineService]

Glad to help, thanks for the nice comment!

[@jonesm7854]

Thanks so much for this tutorial! My hubby is ill and wasn't able to fix our mower. I was able to troubleshoot and replace the belt in about 30 minutes.

[@JeffsLittleEngineService]

great job, thanks for watching

[@Baldwindiesels]

Solved the problem, thanks! Had tried once before & think I missed avoiding the guides, it didn’t work. Appreciate the good help!

[@JeffsLittleEngineService]

Glad it helped!

[@yourselfdotcomlol]

What a good cleanup job. Top shelf mechanic.

[@maximilliantitus5507CC]

Even though you have a Troy Bilt and I have a Craftsman, your drive cover comes off the same. It took me less than 20 minutes to put my drive belt back in place. Worked just fine afterwards. Thanks.

[@JeffsLittleEngineService]

Thanks for commenting, good to know

[@ivormalik]

Just watched your video and had to replace the blade and the belt had come off. Everything is fixed and running great. Thanks for the help!

[@JeffsLittleEngineService]

Glad it helped, good job!

[@kev-m-812]

Same problem finding ALL 8 bolts stopped and KZbin 'd and WALLA THANK YOU!!!

[@michaelrussell499]

Finally some one with a dirtier mower than mine!!🤣🤣 great video!

[@dogpwr]

Thank You! Great video!

[@JeffsLittleEngineService]

Thanks freind

[@KingKel1001]

The same thing was wrong with my troy bilt. I looked at your video and took my lawn mower apart and put the belt back on and it rolling now thanks alot my guy.

[@JeffsLittleEngineService]

Right on

[@117bd]

Started to cut my grass and self propelled stopped working. Your video was first one to pop up. Tells me everything i needed to know about taking apart to repair and i thank you. Every thing i work on i clean before i start to take apart.

[@paulaldermaniii1461]

Just fixed my mower with this video , awesome job thanks again.

[@JeffsLittleEngineService]

good job!

[@frangiew9076]

Jeff You did a very good job ...short & sweet ! I started her up Wheels didn’t turn...figured I’d be spending the day fixing instead of mowing the lawn. I watched your video, so with fixing & cleaning I was back to mowing within the hour. 👌

[@JeffsLittleEngineService]

Right on

[@markrodenburg6349]

Ditto. Thanks for the great video!!!

[@johnblevins2248]

Thanks for making this video... Just watched it and fixed my mower.... best how to video on KZbin I've watched

[@JeffsLittleEngineService]

Wow, thanks!

[@andrewrojas668]

Thank you! I fixed my lawn mower because of this!!! My neighbors are thinking I’m a professional mechanic 😆

[@JeffsLittleEngineService]

Good job, my neighbors thought the same thing. LOL!

[@gregpilcher7663]

I would have shortened this video myself but it absolutely helped me fix my lawn mower. My belt had come loose. It was surprisingly difficult to find all the bolts due to the cut up grass covering everything. Thanks for making this video!

[@JeffsLittleEngineService]

Glad it helped

[@stownley2005]

The chicken cut scene was worth the watch! Lol

[@DouglasBWelch]

Thanks very much. I had the same issue and your video helped me a lot. I added my own little hack. I used a thin elastic band to pinch the belt to ensure it ran inside the pins and it was much easier to get the bottom cover on. Anything strong enough to pinch the belt but weak enough to break when you fire up the engine will do.

[@JeffsLittleEngineService]

Nice work!

[@dfields9511]

Yah, I would of power washed under it before I even touch it. Great vid there. Like the chickens 🐓. Brings whole new meaning to Taryl fixes all saying when he fixed something “there’s your dinner” 🍳 🥚

[@Terry_Baker]

I always clean up the the units first before I work on them. Never know if there's poison ivy mixed in with the grass or not...

[@JeffsLittleEngineService]

good point!

[@shaneniedentohl213]

Thanks a whole lot! Couldn't find the bolts to get it off, too much old grass. Was driving me 🤪

[@JeffsLittleEngineService]

Glad it helped

[@Ricky-Loves-Loy]

Thank You, Jeff, you showed me all the mistakes I made. you are a good teacher.

[@JeffsLittleEngineService]

glad it helped. Thanks friend!

[@KenWilson68]

Saved the day. Don't know if I would have ever found all the bolts to remove the drive cover. Thanks!

[@ericdarby5614]

Thank you sir me and my girlfriend followed your instructions and we replaced that belt.

[@JeffsLittleEngineService]

Great job!

[@darreldavis7884]

Shout outs to you dear Sir. I’ll keep this short. But same scenario here with the wheels not spinning. Exact same mower. I followed your steps and am happy to say she’s running fine now. However two of all the screws I removed don’t fit back in the outer top holes. Seem to be a bit thicker than the rest. Thanks a lot.

[@Dnoil382]

Even after your video, I had to flip mower over a few times to remove the 1000’s screws…. Thanks for video, belt came off front pulley.

[@soyews]

I had the drive cable break on mine.... Thanks for saving me some time.

[@wendeln92]

This video just happened to pop up and it is exactly what I needed. My wheel drive stopped a little while ago and I need to fix it but I heard a "clank" when the wheels stoped moving, hopefully it won't be too difficult to fix. II couldnot even begin to start messing around with it if mine was that caked with grass. WTH!

[@robertford9388]

Thank you... a very useful video. Helped me conquer my self propellant problem with the Troy- Built I have.

[@JeffsLittleEngineService]

Glad it helped, good job!

[@evanski2271]

Thanks Jeff, you’re a true lifesaver.

[@abhishekmahendru1583]

This was so helpful. I was hoping it was debris but it was belt. I hate taking gazillion things off. 😂

[@Swainky]

I know this is an old vid and im necroing it. I just wanted to say thankyou for the video. it helped me in figuring out how to put the belt retainer back on. The only thing other then the clean it first comments I've seen over and over, is always pop the plug wire off the mower before ever turning it while under it. i dont care if there is an engine brake on it. The state at which most mowers are at when you get to having to repair stuff like this is normally under some neglect and years of wear. i wouldnt trust an engine brake to keep an engine that starts by turning the engine in the first place. Just my two cents. even if it was electric start and had a ground kill wire.

[@mandeepgill9424]

Thank you Jeff I Watch your Video and Replaced Self Propelled Cable It Help me Lot

[@JeffsLittleEngineService]

awesome I am happy it helped

[@waymonhubbard7819]

I just watched your video and it was just what I needed to know. Thanks

[@derrickswynn]

This video was very Helpful. Thank you so much. Great Job!

[@JeffsLittleEngineService]

Glad it was helpful!

[@MrRgg52]

I had the same problem with that front cover didn't see those bolts underneath. Thank you.😂

[@JeffsLittleEngineService]

Glad I could help

[@QUANLE-sv1qn]

Thank you so much much! I have the same problem. Your video tell me how to fix it. I almost go to by a new lawn mower. This one I have it since 2007.

[@JeffsLittleEngineService]

Glad it helped

[@baddad5781]

Thoroughly enjoy your videos guy. Bought a used mower just like this for $20 just to tinker and found out the self propelled kills the engine when engaged. Can't wait to get into it and see what's up. Hey btw show more of your animals when you can. Very entertaining

[@JeffsLittleEngineService]

Thanks for watching! more animals it is!

[@skypilot49]

Thanks much. Very good tutorial.

[@JeffsLittleEngineService]

Glad it was helpful!

[@Tngoz]

Do you have a part # for the front plastic cover?.. disregard... pulled it off and got from bottom. Missing my axel clips...

[@asl2mckays]

Thank you for this video. My one question is about tipping the mower on its side. I thought the oil (& gas?) would get into the engine in places you don’t want it. I guess I thought that was a no-no. I also may have just made that up! 😂 I’m definitely not criticizing. I’m here to learn. ❤

[@JeffsLittleEngineService]

That is correct! that can happen if you leave the mower on it's side for too long. Tipping it to the carburetor/gas tank hole side is the safest way to do it.

[@johnkelley892]

Worked like a charm. Great video and instructions.

[@JeffsLittleEngineService]

Glad it helped

[@GaryErnest]

Just what I needed, thank you!

[@JeffsLittleEngineService]

Happy to help!

[@chandaowens4748]

Thank you so much!! You saved me big $$$. Video nice and clear, great instructions.🎉

[@JeffsLittleEngineService]

Glad it helped!

[@dennmark4843]

Great vid, glad you cleaned the deck!

[@ronaldfuhrer]

Very helpful, thanks. But the other guy is right too. You don't have to take the blade and bottom cover off.. just did mine in 5 minutes, thanks to both of you

[@TrustNone35]

How did you do it?

[@seansedgeman7380]

Jeff your the man! I haven’t tried this yet but I’m Closer then I was before trying to solve the issue. Hoping Chanel locks or something will work for the blade bolt.

[@FrankClavelli]

Good job. Thanks for tutorial 👍

[@JeffsLittleEngineService]

Thanks Frank!

[@TrustNone35]

Great video. Do you have a part number for the belt? I need to do this on my mower.

[@SteveSmith-ix5ir]

Did exactly as he said, with same mower, and it works again!

[@mjg263]

I miss the jams! Thanks for the vid Jeff 👍

[@JeffsLittleEngineService]

That is all I needed to hear! I will bring them back!

[@mjg263]

Jeff's Little Engine Service you guys are AWESOME!

[@lazarusmesserian8186]

Thanx. Your video saved me a lot of further frustration and time. Great job! By the way I think the design engineer for that mower also designed the hiding location of the oil filter on my Buick.

[@JeffsLittleEngineService]

Glad it helped!

[@dr6044]

Thank you so much👍. I love how honest you are in it. Very cool👍

[@JeffsLittleEngineService]

thanks for watching friend!

[@ghibliinu6616]

I have a Troy Bilt similar to this. Have a problem with the 9/16 nut holding wheel on to the stud at 5:22. Nut seems to have stripped the threads on the stud, will spin in both directions. How can that nut be removed? It's surrounded by the plastic wheel, would be hard to cut off, if no way to drive off??

[@jerryperez2786]

Thanks for the vid and rock them socks and sandals. Had to show my daughter so she sees I’m not the only one

[@JeffsLittleEngineService]

LOL!

[@robbieaussievic]

..... Well done Mate, I wish I had your L4, L5 Disks. I have to work on everything at standing height.

[@JeffsLittleEngineService]

I'm gonna have to get more work tables for sure

[@kevinbacon6091]

Thank you!!! I fixed it the other day, I saw your video a few weeks ago for the second time a couple of months ago 🤔 remembered everything, no problem, except, I only had 2 screws on the guard, none underneath 👍 everything went too smooth, and there really wasn't too much debris, I clean the mechanics up with a little brake cleaner, pb blaster, hot soap and water, and bought a new blade, it's like it just came off the line, I changed the fluids, and baby is purring like a kitten, the front wheel drive is moving so good I think it lost its wobbly, and MORAL of the story, the belt was still like brand new, is that cool or what👍 THANKS AGAIN

[@JeffsLittleEngineService]

nice work

[@orideous6062]

Great video sir. Much appreciated

[@JeffsLittleEngineService]

Glad it helped

[@rodrigozamora2862]

Thank very much Jeff!!

[@JeffsLittleEngineService]

Thanks friend

[@sirbizzzle1]

Thank you so much for this video.

[@JeffsLittleEngineService]

Glad it was helpful!

[@Cacti88]

Great job Jeff!!! Informative and entertaining...thank you

[@JeffsLittleEngineService]

Glad you enjoyed it!

[@TimTurner115]

That was a lot of grass. Glad you fixed it . thank you sir

[@DavidWilliams-q9h]

I appreciate the video. In my attempt i must have tried more than a dozen times to get the cover off. I searched the deck over and over and could not find a hidden bolt. I could not get the cover off. Thanks anyway.

[@averymcdaniel423]

What size are the black top cover bolts? My bolts came off but I don't know the size and length.

[@kldavis2112]

Very Helpful Video - THANK YOU!

[@JeffsLittleEngineService]

Glad it was helpful!

[@robbyjay8119]

Great video, very helpful.!👍

[@byronbridges4753]

Thanks Jeff👍

[@jeffreycole2550]

Good job, worked perfectly

[@JeffsLittleEngineService]

Thanks for watching!

[@Tngoz]

Any clips holding that axel in place? Mine are gone. Just pulled my cover off. Looks like there should be 3.

[@sundown8906]

You don’t screw around! No pun intended. Good video!

[@JeffsLittleEngineService]

Thanks friend!

[@jdzukij8314]

Great video Jeff, thank you , I’m gonna tackle this tomorrow as mine stopped working today. One question, how do you keep the oil from running out of engine when mower is on its side ? I’ve had this happen before

[@JeffsLittleEngineService]

It is not good to leave the mower on its side for more than 20-30 seconds. Lifting it from the front is the best practice.

[@davidhallman4011]

That long, narrow piece of steel you bolted down in the center that use to cut grass once? Please tell us you replaced that for an extra $20 before you returned the mower back to the owner?

[@charlesgraham843]

I use a pressure washer or air compressor on my push mower and riding mower after I use them.

[@philipchandler330]

My Troy Bilt right front height adjustment lever keeps slipping not staying in the height setting. Any suggestions

[@JeffsLittleEngineService]

If it is the type of mower I think it is, Troybilt sells an update kit only and it involves relacing the entire front plastic bracket that holds the wheels.

[@Soli_Deo_Gloria_.]

@Jeff, Hello, I have a Troy Bilt TB 240 lawn mower and it's front wheel. The drive wheels both turn when the drive lever is engaged, but when I release the lever to pull the mower backwards they both sieze. I watched some videos of guys cleaning and sanding the axel where the bushing sets and rotates around the axel, but I'm not sure if that could be the problem when both wheels sieze in reverse ? And no, I have not torn it down yet. Any suggestions would be most appreciated. Thank you Best Regards

[@JeffsLittleEngineService]

yes it is usually wheel or axle bearings/gear . Try lubeing everything up and make sure everything moves freely

[@EllisMowersandmore]

Did this to one last week. More of a pain than it should be with all the screws. The previous gen troy bilts were so much easier. Two screws and be the cover was off and you could access the self propel. These, not so much.

[@mattkeefe3850]

Very informational. Thank you.

[@JeffsLittleEngineService]

Thanks for watching!

[@charlotterigney7853]

I inherited this mower from my brother and it has the same problem. I have replaced everything on the front axle, new missing axle clips, wheel bearing assembly, belt and drive cable. I even took the belt gear box apart and cleaned and added new grease to the gears Wheel gears are fine, no broken teeth. It still doesn't pull. Any more suggestions would be greatly appreciated... My county is so small, I have no repair shops to take it to . I loved the video.

[@barrykem8876]

I knocked the belt off one of these just by slamming the front end on the ground to try to kick out wet grass. We paid for it to be repaired that time, but I've replaced the belt once since then with this method.

[@russb3816]

I just love the angry chicken. Great video!

[@JeffsLittleEngineService]

lol! Thanks for watching

[@MichaelFernandez-s6q]

Mine keeps coming office. I power wash the deck after each us so i know its clean. Could the belt be stretched?

[@JeffsLittleEngineService]

Yes the belts do wear out, could be the spring that supposed to keep the belt tight

[@6058jeremysmith]

Well done 👍 that’s a very useful video, thank you

[@JeffsLittleEngineService]

Glad it was helpful!

[@dorothyhenry183]

I bought it used what is that green push button on the deck left side?

[@paulneal1290]

Just fixed mine same exact way in 2 minutes, thanks for the tutorial, made it very easy!

[@marktwo3160]

Two minutes...my ass!

[@iheartjim2]

he hehe so funny when you said WOA !! is slow motion!! Still laughing! My front wheels turn a little and then just freeze. My mower is not even a year old! It was working fine and then all of a suf=dden the wheels froze..

[@Eanr5]

Very good video thanks!

[@JeffsLittleEngineService]

Thank you!

[@OBeezyNB]

Have to do this same repair tomorrow on my sister's at her house,do you know what size sockets I will need to complete this same job? TIA