Jenny Air Compressor Install At The VinWiki Garage

[@QantonisQ]

Dreams. 20:20 Hahaha, that's why I'm always watching your videos till the end.

[@MrMegacone]

Matt... My junk is way cleaner than my hands. Ed... Dialed In. 😂😂😂

[@MrMegacone]

Next Mattyism t-shirt "my junk is way cleaner than my hands" 😂😂😂

[@schlaghappy]

I would wear that shirt... There's two layers of fabric protecting my junk all day long, of course it's cleaner than my hands.

[@krawczak9182]

I think chafing is when your balls are rubbing because you’re all sweaty... Matt wouldn’t know because his are dialed in

[@OhhSoijy]

Lmao I laughed so hard at this

[@bobbyrios2k223]

Hahaha, yeah this killed me!! 😆☠

[@timscott513]

Matt and Ed thank you for letting us all watch and learn .

[@ineedabubble]

20:57 had me cracking up. Matt in rare form!

[@chrism8082]

Re-watched that part about 3x - hilarious

[@lelandfamily]

@@chrism8082 Haha! Clearly, Matt is tired of shaking hands. Problem solved ;-)

[@MrMegacone]

20:33 Ed is working out how many times he shook Matt's hand. 😂

[@lelandfamily]

MrMegacone reminds me of the hand sanitizer I got as a gag gift once that was labeled ”Because you may have touched your genitals” LOl

[@ineedabubble]

Edwin Leland HA, I’ve seen that before. Too funny!

[@_J_U_S_T_I_N_]

The last minute of this video is the reason why I love Matt so goddamn much.

[@Forcedinduction_Drive]

Little bits of gold throughout this whole video. Earplugs... what? Keep him on his toes Mike.

[@ricardolima4265]

"Dont pee on your hands" 😂 Great video mat!

[@viel.anthony]

18:00 the height of the plug/bezel isn't the same... my OCD kicked in lol

[@playgame38]

Same

Same, I just posted same thing.

I think they were going to put an external outlet but ended up relocating the one from the bottom. Then it just doesnt match.

[@david6pac]

i love it when matt and mike come together and work

[@floriss3523]

I really enjoy the series Matt I would like to see more of these awesome garage transformations.

[@bobbyw9046]

I have the same Jenny except it is in the horizontal configuration. BTW it runs at 1750 rpm. It is EXCELLENT!

[@bobbyw9046]

Sorry - I misspoke - mine is a 3 hp motor, not 2.

[@MikeFigueira]

I think Matt was referring to the compressor speed not the motor speed.

[@acadian33]

Now that took a strange turn at the end LOL

[@kyled4156]

I want him to come do my garage, his work is very professional.

[@collinhopper7542]

Measure once, cut twice. The first time I heard that was in the middle of construction process, at an old place of employment, where I literally watched the saying come true. It was an awful but hilarious experience. Matt's zip-ties for electrical cords is contingency for when he realizes that the cord is not in the ideal location.

[@deanwilfur9033]

Why not role that inlet 90 at the regulator to face the wall and come straight through the wall into it? Nice and clean, then 90 off the inlet of the hose real toward the wall again and do a sweeping 90 bend with your hose to the discharge of the regulator? Lots of ways to do it i guess.

[@rydog920]

good work! gonna be doing a similar build of 2,000 sq garage space here in california ,still convincing my pops to use swisstrax lol

[@brianmogle1121]

I'm surprised you didn't pick a scroll/screw driven air compressor? It's really quiet and superior performance.

[@derekhanson4215]

Brian Mogle Agree, my freezer runs louder than my scroll compressor. 👍

[@ObsessedGarage]

For this application a screw wouldn't get used enough to function long-term.

[@briancal77]

I almost died laughing at the end. We need 2 new shirts with those phrases for the next giveaway worth 10 entries each.

[@lightbulbbobby]

To make this pro u should put the reels at least 2 feet higher you almost never have to mess with them and they are always out of the way you can even let the lines hang a little so you can grob them quickly and when they retract back out af the way

[@mclarenjohnf1]

That is one nice compressor, I doubt if it will ever get used to full potential but it is there and ready if Ed decides to be more hands on. Also while I think about it he must fancy doing more to his own fleet or he had to spend money to reduce his tax bill.

[@joecharles6910]

Just curious why you wouldn't mount the hose reels higher on the wall keeping them out of the way? Outstanding project! I'm loving following along with this build.

[@joecharles6910]

Note, Just realized that you didn't have much height to work with where you ended up mounting the reels.

[@Patrick94GSR]

At a minimum the tank should have a zero loss automatic drain on it. With Atlanta humidity it’s going to get plenty of water in the tank when it runs. Water sitting in tank means Boom eventually. Guess it’s a good thing it’s in a closet.

[@ObsessedGarage]

This garage is conditioned, so that is unlikely. Once a year should be just fine for that tank.

[@Bward216]

That outlet still ended up higher than the switch

[@Nappylou69]

the compressor room door are u planning on changing it out at some point to block more sound or naa?

[@mr.f8420]

How does that mike guy know how to do all this stuff? Very impressed.

[@rydog920]

why not use dixon fittings? stainless looks nice like that oddball brass elbow fitting with a setup this nice you can nitpick like matt

[@johnwalters878]

Wash before the Dixon fittings 😂 .....

[@bmx687]

Lol Eds outfit. Color coded to the T!

[@ghostreality2965]

air compressors that you like?

[@tylershumaker2605]

congrats on 200k subs! it's about time!

[@ay-ay-ron4071]

Congrats on the 200k subscribers Matt!!

[@AngelGonzalez-ni1pe]

I got a similar One , makes a lot of sound but meke a good job

[@gearbear1993]

If the electrical panel isnt in that closet you should have a means of disconnect with in eye sight, or a breaker lock

[@MikeFigueira]

Garrett Plant Yep it can be locked out at the breaker panel for service. No need for redundancy by adding an additional service disconnect.

[@blaisewilson7639]

@@MikeFigueira No Garrett is correct, it does need a local lockable disconnecting means, even if you install an actual lockout kit on the breaker (which I highly doubt you have), it needs to be within line of sight and 9m to meet code. You also didn't meet code on the lighting, the pot light can is not an approved junction box and the fixtures are not connected to the system ground. Will the way the light fixtures are connected work and be safe? Yes, but does not meet code.

[@MikeFigueira]

To really do it 100% to code would have meant tearing the old cans out (which were not remodel cans) and replacing them with j-boxes and doing a lot of drywall repair. There simply wasn’t time and as you said this will be safe while not to nec. It’s a unique situation to have cans in a garage and replacing them with a 4’ fixture. As far as isolating and locking out power at the nearby sub panel it’s safe to do. There are effective breaker lockouts that don’t require mods to the panel not that this will ever need to happen here.

[@joec3897]

Too funny, I have always made the joke that you should wash your hands before you go to the bathroom. Let's start the movement Matt, #IWashBefore

[@1musicsearcher]

Next tee-shirt. “Just don’t pee on your hands “.

[@bryantbolden5763]

What kind of hardware do you use to mount the reels to the wall?

[@ObsessedGarage]

3/8" Lags and washers

[@mdwdirect]

“Just don’t pee on your hands.” Why didn’t I think of that?

[@robertsmithUH60driver]

3 rd. Congrats on 200k Matt. Been here since 50kish.

[@timothyhoover9343]

The reels would look better if the hoses were aimed down. Easy to change. Just my opinion.

The outlet didnt match the position of the switch. I think they changed of mind and placed the one that was at the bottom there. Looks ugly not being aligned :(

[@poison1553]

You guys see that low key pen flick at 13:53

[@cautilli]

why no california air tools?

[@ObsessedGarage]

They are wobble piston compressors, so they don't have a whole lot of output. I'm going to be offering smaller silent piston compressors soon.

[@cautilli]

@@ObsessedGarage awesome, always looking forward for your solutions!

[@DavidJWarEagle]

Oh boy....poor Ed. Sorry man... Ha-ha!

[@dominikk1978]

Built by Matt M. Yard sign sign. Save $300. :))))

[@norcalsrt1214]

Should have installed a disconnect switch yes u have a breaker but why be lazy install a disconnect at the compressor do it once do it right. Also why no filtration for the air? And u failed to put a water trap in the line to be able to purge the line before the regulator all that water is going to settle in the low point of that expensive stainless line u just installed and not have a way to get out.

[@edbug007]

This guy has no clue on anything he’s getting installed he just knows how to spend money. Must be nice!!!

[@ObsessedGarage]

Isn't that what all aspire to be?

[@norcalsrt1214]

I love u matt but I had to cringe on this install so much was done wrong.

[@Patrick94GSR]

@@norcalsrt1214 what, exactly, was done wrong? Since you seem to be the expert?

[@norcalsrt1214]

@@Patrick94GSR first off u need to have a water trap comming off the compressor, this will allow water to collect and be purged before it hits the reg and any filters u use in the system. The way matt built this system the water will condense in that stainless hose at the low point with no way to be purged. U should always come off the compressor straight out to a t, the t facing down with a line and drain installed then go up at a 90 vertical into the distribution system. Water will not go up the 90 and settle in the line comming down off the T. With an auto drain on the compressor and the trap off the t u will be free of water entering the system. This will also save u money on filtration as u wont be pushing as much water through ur desiccant filters. Also each line u drop for an air station should have a way to drain on the bottom.

[@norcalsrt1214]

@@Patrick94GSR and I'm no expert I just installed pure air systems for companies like intel, apple and others in silicon valley where water, oil and other impurities were a must remove. I have also seen in person what happens when someone has failed to drain a compressor tank ie explosion. I over built my own system but adding a water trap off the compressor is a must if u want to keep water and moisture out of the lines and save money on filters.

[@pighater951]

10,000 dollars to fill tires🖐️👀🤔💨💪😆😆sheesh

[@SubaruWRXStiYamahaR6-AllGone]

I wash my hands before I pee!

[@nazrockz]

what an overkill compressor and waste of money

[@ObsessedGarage]

There is no such thing.

[@stevenw799]

If you want to get in the vacuum game check out VacutechLLC. It's the best of the best owned and operated out of Sheridan Wy.

[@lucasjna08]

Always before peeing!!

[@bigfoot286]

I have never agreed with Matt more then the last 30 seconds of this video. Clean your hands before you go to the bathroom and as long as you don’t pee on them, there still clean!

[@Patrick94GSR]

unless you can aim hands-free, and then dry off with TP afterwards, then yeah, you should be washing hands afterwards.

[@mdelgado8386]

👍👍

[@jimsmopars1614]

don't care if no one pees on their hands,shaking hands that have junk sweat just isn't for me.