C_23 Formatted Input Functions in C Language || C Programming

[@umairmalik7875]

Polite speaking to deliver lecture with soft voice.I'm glad to listen the topics. Love you nice teacher for me.

[@blueglacier007]

I have been following through your c programming course and I'm impressed by your clear and concise explanation.THANK YOU JENNY

[@mounikalukalapu7587]

She deserves more likes 🥺 and even she is not asking for that

[@abdulrahimjalloh363]

If you print x it will give you 1 for int, and 1.000000 for float. But it all depends to the amount of format specifiers you have in scanf. If you have 3 format specifiers, then x will be 3. Thanks very much mam. May God bless.

[@bhimanagoudagoudappagoudra2396]

float will give only 1.00000 after dot 5 digit only sir

[@vinayaksharma945]

Mam please give a ❤️ to.this comment I watch ur lectures daily plsss plss mam

[@krupa1963]

11:22 comma is acting as a *separator* 19:11 X will be assigned with 2 madam

[@pradeepselakoti8787]

How 2 will come explain?

[@manojKumarBoddu-eu7mz]

Operater

[@manojKumarBoddu-eu7mz]

2 formatt speciers

[@santoshreigns6908]

Mam ur teaching way is superb my request for you to make lectures on python also 🙏

[@madhumalipremarathna3038]

11:27 The comma act as a separator there. 19:30 The output for x will be 2 if we write , scanf("%d" , &a , &b) ; sum will be give some garbage value 😂 and x will give 1. if we write , scanf("%d %d %d" , &a , &b) ; It will get the input from user but will not return any value for sum or x.

[@farzanaashraf8136]

Very thanks 😊

[@ManishSingh-he1ei]

???

[@riyasharan8959]

unbeatable playlist of c language ,ever found in youtube learning c from this playlist in 2023

[@subha2860]

You are such a fabulous teacher I am easily able to learn because of you Thank you mam and please support us like this 😊

[@HardikBarot-ud2ui]

x will give the total of "control string", %d %d %f %s total value of X is 4...

[@harmeetsingh2976]

Mam you are the great teacher and explains all the topics clearly without any doubt very well I am beginner for this subject because I am student of computer science and engineering

[@ahmedhesain4271]

x value will be 2 and that means the number of format specifier you taking the user input using them.

[@brindhavenugopal4395]

(11.22)-comma is a separator mam

[@shacks05]

I kindly Request . To Pls Make Videos on Python As soon as possible mam ❤️ . Because we are Addicted to u 🙏☺️

[@aniketthorat9732]

See This Playlist : kzbin.info/aero/PLl2gq7invFLBhXOhUaBOX0dJ3r1eIpJpT #techblooded

[@adithistar2189]

@@aniketthorat9732 thank you 👍🥺✨

[@techblaze516]

'x' here, will return the number of inputs taken by the scanf() function. And no other errors in any other case.

[@AnkitYadav-cj6ut]

When legend teachers get their mistake they says" I am checking that you are attentive or not"😁 But mam you are a awesome teacher

[@graphicslearn8568]

MA'AM you r teaching method is very nice THANKS FROM PAKISTAN

[@Hariharan_Karthikeyan]

Ma'am can you just make videos on Embedded C ? It might very useful for us

[@cheklastudio11]

Hi mam your lecture is very clear than our college lecture

[@neutral_mindset]

Ma'am communication skills and attitude op 😍😍😍

[@HaniHani-mu6ru]

mam one thing about is ur a " more then pro ".........🤩

[@kathirvelanm991]

Mam please continue DBMS and operating system mam , please...

[@yogasankar2032]

Mam please upload towers of honoi problem using data structures

[@isaac-victorshonowo1838]

Watched and Understood ❤

[@அனுபவம்]

very nice explain 😊

[@tithighosh2169]

Ma'am please upload videos of pointers, structure, union, enum, files handling, command line argument in c

[@sunandamallick4310]

I kindly request to please make videos on c programming function as soon as possible mam🙏.🎉

[@harshpandey8159]

Ma'am u gone to core amazing maam

[@scifoga]

Thanks for your explaination Thanks a bunch...

[@akalya5050]

I m really thankful to you mam...Your way of explanation again and again I love it...You are really great mam..💯

[@junaidking1074]

Hi

[@abhishekkumarjha4314]

Tqq Mam.

[@maheshdubal8369]

Mam can you make a video for user defined functions in which function call is there

[@informationtrader6959]

You can watch my videos bro for that information

[@SashankSasi-om4el]

Super madam explain nice madam

[@pallavipatil1148]

Nice explain mam

[@tps8470]

Thanks a lot Mam

[@souravbhagat1358]

Mam plz make a vedio lecture series on Adavanced Algorithm design you uplaoded the vedios on algorithm but plz upalod remaining lectures on Algorithm

[@fuadhamedmohamed4311]

we need more

[@ranjeetkumarprajapati1756]

Mam, SQL ki full fom structure query language hoti h.. kya kisi condition me iski full form standard query language ho skti h ya nahi....

[@sandeepoad658]

Thankyou maya love from Nepal

[@JESUS_FOR_EVERYTHING]

mam scanf(int=d,float=f ,char=c why float= f and char c but int=i but we have use d yyyy???

[@shivasmart967]

tq mam

[@swayam50]

Nice

[@praneethtanguturu2922]

Mam in the programm ,if i use only main() instead of void main() it is getting error why?

[@KalingaRatnaDas]

Thank you mam ❤

[@thopbgm38]

Keep all videos at a single place difficult to search

[@ashishxsoni]

Gr8

[@sherin_nila277]

Mam please upload the video for pointers

[@reganakandwanaho1223]

The x gives the number of operands taking part in the sum function

[@furzi1432]

Can you tell about [^ ] in scanf and %*c and %[^ ]%*c in scanf plss 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@farzanareefatraha8635]

(^)- this symbol is called circumflex. Normally if %[ ... ] is used then scanning is done till whatever(here, ...) is written inside the 3rd bracket is found in input. The scanning gets stopped just the moment when any character outside “...” this range is found. For instance, Say char x[]=“hello”; printf(“%s ”,x); scanf(“%[abcd]”,x); printf(“%s ”,x); Here, in test case #1. cadbcadbaefgchs Output : _________ hello cadbcadba #2. jkalehcd Output : ________ hello hello Why? In T#1 the scanf function scanned(and replaced the original string “hello”) our input string till it found [abcd] in the input string “cadbcadbaefgchs” and just when it encountered a letter outside the range [abcd], in this case, it is ‘e’, it stopped scanning and put ‘ ’ at the end. So after scanning x[]=“cadbcadba”. In T#2 the first character scanf encounters is ‘j’ which is out of [abcd] range so it doesn’t scan and replace original string “hello” at all and hence x remains x[]=“hello”. NOW Whenever we use circumflex(^) here, i.e. %[^...] , it tells scanf to scan anything unless anything from (...) portion is encountered. As soon as any character/digit from (...) portion is encountered, scanf will stop scanning and put a ‘ ’ and end the string right there. For instance, for T#2 now if we modify the code to char x[]=“hello”; printf(“%s ”,x); scanf(“%[^abcd]”,x); printf(“%s ”,x); our output will (lemme remind I am writing the output for T#2, if you understand what I am blabbering here, you may reply what you think will be the output for T#1 in the comment section :3) Output for T#2 ________________ hello jk Why? The scanf function scanned upto “jk” but then it encountered ‘a’ which belongs to [abcd] range and this time as we have used “^” before [abcd] our scanf will not scan anything from this range and if it encounters a/b/c/d it will stop scanning. And that’s what happened when it encountered ‘a’ after scanning “jk”; it stopped scanning further and replaced “hello” with “jk”. I know this was a whole lot of blabbering :3. But now can you figure out how “[^ ]” works? PAUSE & THINK HINT : --- indicates a new line(simply, enter key). So when we are using ^ we are indicating keep scanning the string till you encounter a new line and don’t stop before you encounter new line. So when you are entering HELLO WORLD.(new line/enter key) I AM AN ALIEN.(newline/enter key) Your code keeps scanning the string till it finds the first new line which is after “.” Of “HELLO WORLD.” and then stops scanning and prints “HELLO WORLD” For instance, now if we modify the earlier code as char x[]=“hello”; printf(“%s ”,x); scanf(“%[^ ]”,x); printf(“%s ”,x); and if you give input : Input: --- HELLO WORLD. I AM AN ALIEN. Output : ---- hello HELLO WORLD.

[@furzi1432]

@@farzanareefatraha8635 Thankyou very much bhaiya 👍👍🥺🥺

[@Prajwal.Suresh]

@@farzanareefatraha8635 😶 i am first year student and understand only little bit in this bro

[@farzanareefatraha8635]

@@Prajwal.Suresh I am also a first year student bro 😂 DW! Search and Read a little more about it and I am sure you will understand it. At first when my professor told us about it I didn’t also get it but at the end HAD to understand it as he compelled us 😕.

[@Prajwal.Suresh]

@@farzanareefatraha8635 ok bro 🙄

[@pateljainish4692]

Mem your looking very beautiful that’s why I’m watching your video ☺️

[@swayamgupta3188]

After adding x it is not giving us a garbage value

[@scifoga]

Can I use Blankspace between "control/conversion string"??

[@Anjanpradha2754]

Thank you mam

[@15easy]

Without declaration int main Program isn't running

[@Rajeevkumar-cm4mn]

nice 👍

[@syedalifathimaa9618]

x = scanf("%d %d",&a,&d); x has 2 y = scanf("%d",&b,&e); y has 1 with warning - too many arguments z = scanf("%d %d %d",&c,&f); warning - %d expects int argument After giving input, then goes to segmentation fault!

[@saqib_720]

put integer value

[@SadhanaSharma]

11:20 comma is acting as a seperator

[@goldenvideo6587]

Mam Hindi medium walo ko bhi pdaya kariye

[@18fatima15]

17:35 2 18:15 #include int main() { int a,b,x; x=scanf("%d",&a,&b); printf("%d",x); return 0; } output: 17 18 1 #include int main() { int a,b,x; x=scanf("%d %d %d",&a,&b); printf("%d",x); return 0; } output: 12 13 14 -------------------------------- Process exited after 8.303 seconds with return value 3221225477 Press any key to continue . . .

[@tejateja2969]

❤

[@tellalavanya3819]

In this scanf() function we can skip some input using* symbol plz explained with examples

[@continnum_radhe-radhe]

🔥🔥🔥

[@shubmishra7134]

𝕸𝖆𝖒 𝕻𝖗𝖔𝖏𝖊𝖈𝖙𝖘 𝖇𝖍𝖎 𝖇𝖆𝖙𝖆𝖓𝖆 𝕱𝖔𝖗 𝖎𝖓𝖙𝖊𝖗𝖓𝖘𝖍𝖎𝖕 𝖑𝖊𝖛𝖊𝖑.

[@mdnazamahmad550]

Mam is so beautiful😍

[@collinsotieno511]

i saw the eror before you told mee 😊😁

[@ececse]

thankyou mam🙏

[@sridevi9353]

Mam are you taking course for c,c++ and java

[@abhinavshukla2202]

Hi bhoo devi

[@BandariBhavya-y6n]

Yes madam

[@jackbhai-j8u]

Comma is acting as a separator in scanf() mam

[@ranveerbairwa6011]

Mem live class kab lagti hai aapki

[@julfikarali3986]

❤❤❤❤

[@praneethtanguturu2922]

Mam when i want to use void main and int main

[@Cartoon_Characterz]

Is it mandatory to use ampersand in scanf() ? Because i have noticed no error occours if we omit ampersand

[@shahidnawaz3832]

Really thAnks

[@aniketkumar3126]

5th comment Nice 👍

[@ranjeetkumarprajapati1756]

@@vivekprasad_official_music2267 nahi nai ye kya h.. mene pucha kya comment me link diya apne...

[@karthickambrish]

Comma is used as a operator mam...???

[@user-Mk0908]

I wil send u gift mam tel me &jenny printf(“address of jenny “);& scanf( “phne number”) 🤣😛 Never got e perfect-brainer lecturer as u In my entire btech 👍👏👌u teach concepts so clear of any confusion & perfectly wit examples & accurate on piont wit its realtime use great 👏✌️

[@abdulrahimjalloh363]

Mam, can i use scanf without & if my variable is a pointer ? example: int*a; scanf("%d",a);

[@Fable_o]

I think in this case it will give the address of the variable a. I am not sure though.

[@SadhanaSharma]

19:08 output will be 2

[@balkrishnabane1392]

Can you plz explain how we are getting x=2

[@motivation_hub117]

Mam why can't we use only printf

[@sarojkhatiwada6224]

khatri is also a caste in nepal....are u related to nepal?i think you are chhetriya..are u?

[@kiranchaudhary9949]

here the value of x is 2 same as how many times scanf takes input from user.

[@nagarjunakammara5796]

Medam is it true presently every one following ANSI C language?

[@lalitharamachandra6659]

Mam comma acts as operator because first operator will not be discarded it is used in evaluation. 9:47

[@honey-vg2vk]

I am getting -1 for X=scanf("%d%d",&a,&b); Printf("%d",X);

[@lucky-ls2es]

Me too

[@nayanraut1412]

how to read the scanf function body

[@meghasinha1706]

Mam plz array pointer and structures

[@chandrabose8774]

Mem teach data structure algorithms analysis in c++ plzz teacher

[@shashank_kishore_]

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@nitish2001nb]

mam real examples k sath illustrate kia kijiye pls

[@honey-vg2vk]

Comma acts as a separator

[@harshvardhansharma22]

, is working as seprator

[@hariparuchuru3858]

comma is acting as separator

[@veeramreddyramanareddy5497]

Seperator

[@kiranchaudhary9949]

comma is acting as a separator

[@abhishekpandey7338]

Mam why we are not using return 0 ;statement

[@akashtg6646]

Comma act as separator

[@sinduvelpula7658]

comma acts as a seperator

[@hibro22660]

Yes , not used3 In main function

[@padmapranathi8426]

Void main()