Tap to unmute

How To Read The Label on Motors; Ultimate Guide To Electric Motors:

  Рет қаралды 198,713

Jeremy Fielding

Jeremy Fielding

Күн бұрын

Пікірлер
@zacharyjohnson1987
@zacharyjohnson1987 4 жыл бұрын
Who downvoted this guy? He’s great. Calm and clear, gifted teaching skills. I’d consider myself very fortunate to have this guy mentor me.
@williammunny7133
@williammunny7133 3 жыл бұрын
I would too, the reason I'm here is to learn how to understand the motor label.
@chriskelly3678
@chriskelly3678 2 жыл бұрын
Agreed!
@johnstrawb3521
@johnstrawb3521 2 жыл бұрын
@A_Tower @Jeremy Fielding People who know how to teach, probably. So many obvious questions he fails to answer in just the first few minutes. Why handwave hp when you can simply mention whether this is electrical or mechanical (we know it's the former, at 746 watts, but why would a novice know?)? There are four instances of this kind of thing in the first three minutes. Such a shame. A good teacher always takes the opportunity to tell you more, not less.
@austingupton1421
@austingupton1421 2 жыл бұрын
No matter what, every channel has haters, some people do it for no other reason than just because.
@motionsick
@motionsick 2 жыл бұрын
people rolling over in bed on the apple tv remote
@boots7859
@boots7859 5 жыл бұрын
Another up and coming addition to the AvE, BigClive, Project Farm, This Old Tony family. You just don't get many YT'ers who can put out a vid with excellent video and and sound without annoying music. And the depth and attention to detail to the things that are actually critical to know and understand for those of us who are actually into making instead of just watching.
@simonhopkins3867
@simonhopkins3867 5 жыл бұрын
Well said bud.
@EternusVia
@EternusVia 4 жыл бұрын
Please don't forget Applied Science! Absolutely spectacular engineering and science DIY projects, highly technical, all meat and no fluff!
@mfsolutions
@mfsolutions 3 жыл бұрын
and for those who want daVinci check out Matthias Wandel ... I worked with Matthias and was blown away by the 19 yr old in his first year of University... these folks are like superheros... each have their superpowers and faults. My superpower is recognizing that we are so lucky that we have youtube to access their minds. Please continue to support them and to make posts helpful to the poster and the viewer.
@MrMelvinOneil
@MrMelvinOneil 5 жыл бұрын
I can't tell you how much I appreciate your videos. Truth about my man!
@noends
@noends 2 жыл бұрын
Dude, I cannot believe how helpful this guy is. Much appreciation.
@ronslaughterandalice1018
@ronslaughterandalice1018 4 жыл бұрын
Top Shelf all the way. I really am getting a lot out of these videos. Old retired guy here with thousands of projects to do and ready to get started.
@jackandbarbiereeves9332
@jackandbarbiereeves9332 Жыл бұрын
You've missed your calling my friend..you would make a great teacher your very thorough, humble, and you keep the audience watching and listening... restoring 70+ft yacht for a research vessel...I weld fab and mechanics but very nervous when in comes to electrical I have 6 large electric motors that need replacing and after watching your video I've decided to do it myself instead of paying a electrician thank you and I'm sure I'll be watching many more of your videos...
@markrarey3834
@markrarey3834 9 ай бұрын
Perfect information for me. I called the manufacturer looking for what the overload relay needed to be set to. You just helped me to understand that it's printed right on my label. Nice video!!! Thanks!!
@kstoneace
@kstoneace 4 ай бұрын
I was just telling my wife how much I enjoy and learn from your channel. You are very intelligent and able to bring things down to my level . I am also impressed how you can build things and fixtures to hold the testing equipment. Your children are lucky to have you to teach them. Cheers Jeremy !
@danhealy7341
@danhealy7341 5 жыл бұрын
Thanks for the information. You explain things very well. Welcome back. I never fail to learn something from your videos. You manage to demystify complicated subjects.
@ADCINC76
@ADCINC76 3 жыл бұрын
I stumbled on your videos and cant stop watching your tutorials
@DavidTangye
@DavidTangye 5 жыл бұрын
Another great video Jeremy. I am recommending that our local tech club hobbyists watch it, and we play it to our local tech kids.
@jazzophis
@jazzophis 5 жыл бұрын
Love your videos. I have always played around with motors and electronics and seeing a video titled for beginners I am hesitant to click but so far you always teach me something new. I firmly believe the best way to learn anything is having a very good understanding of the basics and you are very good at providing all that.
@x47g22
@x47g22 5 жыл бұрын
I learn so much from you. And I know exactly how it feels when you show people the 'inventions' you've done. Even if they don't really appreciate it, that moment you show it to them and it works like how it should be. Priceless! Thank you Teacher Jeremy. You are a natural teacher. Very patient and it feels like you won't scold me if I accidentally make a mistake somewhere in my project. Thanks again!
@dan260140
@dan260140 3 жыл бұрын
You are clear, patient, and a good teacher. I’m taking industrial maintenance and I’m learning from you and my teacher on 3phase motors
@kevinstreet5709
@kevinstreet5709 5 жыл бұрын
Brilliant Jeremy, the amount of good motors I have seen throw away because people are baffled by them and maybe don't have your creative ideas, you explain things very well,thanks mate
@pauljefferies5837
@pauljefferies5837 3 жыл бұрын
It's great that he keeps mistakes in and corrects them on-screen. Major learning opportunity and a sign of humility.
@atcjoe1600
@atcjoe1600 4 жыл бұрын
This is my 2nd video, thanks for keeping the explanation straight forward and simple.
@andrewriker5518
@andrewriker5518 5 жыл бұрын
Great info. I like how you explain without talking down. Very informative!
@richardthomas1101
@richardthomas1101 4 жыл бұрын
Great teaching style, practical and to the point. Omitting excess unnecessary verbiage, much appreciated!
@samehdarawshi3537
@samehdarawshi3537 5 жыл бұрын
great video Jermey, love your style, knowledge and you speech style. one of the best channels i know of
@durangotang1681
@durangotang1681 5 жыл бұрын
Thanks to you I have two blender motors, 6 printers of different ages and sizes, and am driving home with my second treadmill from this years “spring cleanup”. I spent several hours in the wee hours of the morning Driving through alleyways in some parts of the city where people put theirs spring clean up trash, and up and down every other street in that city. Just bought a lathe and a mill that should be here Friday. So far my wife’s been a good sport. But she hasn’t seen inside the shed yet😂
@back40bandit98
@back40bandit98 5 жыл бұрын
Your a great teacher. Love your videos. You have encouraged me to tear apart my washing machine.
@longtermpillow
@longtermpillow 2 жыл бұрын
I know this video is like two years old, but just wanted to say your videos are great! I don't think I've ever made a KZbin comment before, to tell you the truth. As someone who loves to tinker, has no formal engineering training, and gets in over his head all the time, i absolutely love your videos. All the things I've always wanted to know about motors and other things you post, but never had the time to look up or got wildly confused when I did. So, just wanted to say thanks for making the content that you do!
@papasteve215
@papasteve215 5 жыл бұрын
Mr. Fielding, I always enjoy your videos and find them most helpful. I always hit the like button as soon as I click on to your videos as I know I will like them and will learn. Thanks for taking the time.
@sampickett3843
@sampickett3843 5 жыл бұрын
My electric motor Yoda, you are.
@MenzelMotors
@MenzelMotors Жыл бұрын
Very nice to see that you convey something good with your knowledge of the industry and the interested parties. We like the power of the big electric motors.
@elihappinesspie
@elihappinesspie 4 жыл бұрын
Treadmill Duty (TD) is the ratio of the duration of a typical new year's resolution (N) to the time the device is used as a clothes hanger for the rest of the year (C = N - 365). So, let TD = N/C Time units are in days. Typical treadmill duty is around 7:(365 - 7), or 7:358, or ~.02.
@1414141x
@1414141x 4 жыл бұрын
Just the info I needed as I am looking to buy a second hand motor - now I have a little more knowledge on what the labels actually tell you. Much appreciated !
@dewexdewex
@dewexdewex 5 жыл бұрын
Your content and delivery style are fantastic. Many thanks.
@arthurfricchione8119
@arthurfricchione8119 5 жыл бұрын
Jeremy your videos are fantastic and packed with useful information. Thanks much for your time and knowledge. 👍
@zpoedog
@zpoedog 5 жыл бұрын
You have answered so many questions I've had about electric motors I can't believe it. Always look forward to your videos. Thank you!
@raylarkin5004
@raylarkin5004 5 жыл бұрын
Really glad to see new content from you Jeremy. 👍
@richardt2905
@richardt2905 8 ай бұрын
Awesome job with the describing the label. I knew about half and always wondered about the rest. Also, love the projects you do from salvaged motors! Thanks much.
@neftaligomez8117
@neftaligomez8117 5 жыл бұрын
Thank you very much for sharing youre knowledge .... greetings from Yucatan , Mexico
@edmundhughes1285
@edmundhughes1285 2 жыл бұрын
Excellent teaching skills - highly intelligent individual!
@superdau
@superdau 5 жыл бұрын
Again a video of yours where it ended and I wondered where those 18 minutes had gone! Not many youtubers manage to do that.
@joepoelmans5910
@joepoelmans5910 5 жыл бұрын
If not for his other vids and playlists id have been like wtf I need more info lol
@uspockdad6429
@uspockdad6429 5 жыл бұрын
These are the best explanations I have ever heard on electric motors. You've earned yourself a new subscriber. Please keep up the great work. I have been collecting 18650 batteries and plan on building myself an electric bike, or go-cart eventually, I will definitely be coming back to learn more.
@barryellisjr4187
@barryellisjr4187 5 жыл бұрын
I have always been interested in the science behind machines, mechanics or making things in general. Yet never had the knowledge behind much of it. Jibber jabber jibberish if i was to have someone teach me lol! So I really appreciate the serious time you take in explaining EVERYTHING in your videos! It’s given me so much to the point I am finding ways to do the projects i’ve always dreamed of doing! Thank you Brotha
@greypoet2
@greypoet2 5 жыл бұрын
So happy to see another of your works. Good information explaining some things I wondered about. Thank you!
@CCSandSonsWorkshop
@CCSandSonsWorkshop 5 жыл бұрын
Super helpful information here. This subject has always intimidated me. Thanks!
@christiangeiselmann
@christiangeiselmann 5 жыл бұрын
Same here.
@benniedonald
@benniedonald 3 жыл бұрын
I watch your channel and Robert Murphy Smith. Forgive the spelling mistakes. You both explain these things so well.
@motor1395
@motor1395 5 жыл бұрын
Thanks Jeremy. Another excellent video. All the best to you and your family!!! Norm in Arizona
@j.j.d.senterprises9046
@j.j.d.senterprises9046 4 жыл бұрын
Very pleased I found your channel...powerful information and conveyance is easy to understand
@BobbeeSingh
@BobbeeSingh 5 жыл бұрын
I wish I had you as my brother when growing up. Very useful info.
@music7169
@music7169 5 жыл бұрын
I recently took my old treadmill to the dump, also a washer and air conditioner. I wish I would've watched your videos sooner. I would have 3 motors to experiment with. Great videos. Very informative.
@TrashwareArt
@TrashwareArt 5 жыл бұрын
Glad to still see you doing stuff! Steve from Virginia checking in!
@jeffryblackmon4846
@jeffryblackmon4846 5 жыл бұрын
I learn more from you than my college motors course. Or have I forgotten my college info? You're very good!
@ed6837
@ed6837 4 ай бұрын
great videos!! I am an electrician and still learning
@mfsolutions
@mfsolutions 3 жыл бұрын
Jeremy, listening to you is like a zen meditation... you are humble and have a tone that is so approachable... I think of WWJD (What would Jeremy Do) when I face my class. BTW... I had a 5 hp motor that was running a Hydraulic pump fine in Pittsburgh but when they moved the equipment to Connecticut it would not cut it... the voltage dropped from 230 to 208 and the current went up and would blow the fuses. Needed to change the motor for the new location. The challenges of running near the edge.
@chrisgarcia767
@chrisgarcia767 4 жыл бұрын
I just happened to come across one of your videos a couple hours ago and I've been watching different ones from you since. This video caught my attention because I've been having trouble with my 5 horsepower Ingersoll air compressor motor, and trying to make sense of everything on the plate of the motor was confusing. I like how you talk about using treadmill Motors a lot, last year I made a electric wire stripper using the motor and rolllers off a treadmill. And it works awesome LOL
@martymcmannis9121
@martymcmannis9121 5 жыл бұрын
Thanks for the video. Talk about helpful. I will go back to this video many times probably. Thanks again. God bless all
@bingo624
@bingo624 5 жыл бұрын
he is so good helpful and humble! great man!
@JeffsTravels
@JeffsTravels 5 жыл бұрын
excellent video. I knew most of this but not the service factor or insulation class. Using an asynchronous induction motor as a wind generator, I have burned up the insulation so I need to find a beefier motor.
@MoistSugar
@MoistSugar 5 жыл бұрын
Omg I think I just found my favorite channel ever!! I’m serious!! I’ve been taking parts from things for a while now.. but then I was like.. uh what now? Thank the gods for you 😃😆 for real though thank you.
@johnafagerquist8235
@johnafagerquist8235 5 жыл бұрын
This is an excellent video. I can't thank you enough for the label deciphering! I know I could probably find it dryly presented in some book, but your explanations are so easy to listen to and understand. Of course, I'm going to go through the video and write this all down but, without you having explained all of the notations, my cheat sheet would be worthless to me within days.
@matthewputnam7486
@matthewputnam7486 Жыл бұрын
Jeremy, Treadmill Duty: this rating means moderate use for the first month after purchase, followed by a sharp decline in use and a sealed housing to protect the motor from dust once it's moved into the garage to be stored for 20 years.
@johnwagner8465
@johnwagner8465 3 жыл бұрын
Thanks so much for the great video...straight forward..easy to understand
@ryanbruns4974
@ryanbruns4974 5 жыл бұрын
You are one cool cat my friend! I love your videos, and learn a lot from them! Keep em coming! Would like to see what you can make using a garage door opener motor.
@garycarter583
@garycarter583 5 жыл бұрын
I always enjoy watching your videos they easy to follow . thanks for sharing your knowledge.!
@garagemonkeysan
@garagemonkeysan 5 жыл бұрын
Another great instructional video. Helps when salvaging motors. Thanks for sharing! : )
@EvenTheDogAgrees
@EvenTheDogAgrees 5 жыл бұрын
Damn, stumbled upon this before video 3 is out. Alright, alright, you sneaky bastard. You win. You just got yourself another subscriber. ;)
@apastor1999
@apastor1999 5 жыл бұрын
Love your content! You provide an awesome service. Ty
@ericchan7128
@ericchan7128 4 жыл бұрын
Hello, your explanation is very clear and informative, thank you for that!!
@JNCPoPs
@JNCPoPs Жыл бұрын
I really appreciate your work. Thank you kindly, good sir!
@r.milton7920
@r.milton7920 5 жыл бұрын
Much appreciated JF, you've given me hope on trying to grasp the world of electronics, I'm starting to believe i can build my own stuff too ✌ 👍 keep it up man thanks
@mewzishun
@mewzishun 5 жыл бұрын
Lots of great information Jeremy. Thanks!
@soepbijbel
@soepbijbel 5 жыл бұрын
thankj you for the great video again! i will recommend this to our interns the next time motors come up.
@raulromero6462
@raulromero6462 3 жыл бұрын
I started a very ambicious Project of connecting a hole farm to a Arduino.. but i dont even know how to change a light bolt 🤣 your vidéos are helping me a lot!! Tanks 🙌🏽💎
@tjdot8
@tjdot8 5 жыл бұрын
Great man thanks for the time you are sharing. Years of experience explained to the point that you just saving years off the learning curve for me. 😂😂 I only watched 4 videos. 👍 👏
@alexvonbosse5090
@alexvonbosse5090 5 жыл бұрын
Another informative video! Great job! Thanks for sharing!
@Lawman212
@Lawman212 5 жыл бұрын
Very good information. I've looked at these labels many times, but I didn't know what they were trying to tell me. I'd be interested in learning more about adapting motors to pulley systems like you have in your bandsaws. How to adapt a motor to a certain device speed, yet staying within the performance specs of the motor.
@insAneTunA
@insAneTunA 5 жыл бұрын
looking forward to your upcoming projects :-) Big thumbs up!
@jraschke
@jraschke 5 жыл бұрын
Great video JF, very informative!
@lucianorosel8128
@lucianorosel8128 4 жыл бұрын
Great vid! Will be subscribing immediately!
@dennisfacer8884
@dennisfacer8884 5 жыл бұрын
I agree, you are in some classy company with AvE and This Old Tony!
@jimmilne19
@jimmilne19 5 жыл бұрын
Yes! Another great video. Thanks for sharing.
@stevepence9869
@stevepence9869 5 жыл бұрын
Very useful information, your videos are always great.
@SIAFU
@SIAFU 5 жыл бұрын
Thanks for the knowledge bro...keep posting these great informative videos.
@TheKingOfAces1
@TheKingOfAces1 Жыл бұрын
Awesome and helpful video. Thank you!
@georgeeads8689
@georgeeads8689 5 жыл бұрын
Another great video Jeremy.
@goodfortune6399
@goodfortune6399 5 жыл бұрын
Great video, I'm wondering about direction of rotation . How do they use a drum switch to change directions on a single phase 220 motor? Thanks
@bandit7519
@bandit7519 2 жыл бұрын
You videos are some of the best on KZbin your a very smart guy I learn a lot from your videos thanks for your time I’m not sure if you have any up I just found you not long ago but if you don t could you do couple videos on how to use a multimeter and how to test th8ngs with them
@codewarrior65
@codewarrior65 3 жыл бұрын
Great video. I am looking at using a variable frequency drive with a 3-phase motor running 1-phase input. Pretty cool, but still learning.
@lhendrix278
@lhendrix278 5 жыл бұрын
Good video, enjoyed. Straight forward and helpful.
@berniemac8413
@berniemac8413 5 жыл бұрын
Any idea how to find out what size capacitors to use on electric motors? Its missing the capacitors. There’s two locations for them. I’m assuming one is a start and the other a run. The motor runs on 115/230V, 3450 RPMs, it’s for a continuous air compressor, and it draws 15/7.5 amps.. I’m unsure how many HP’s it has..
@richardhaen
@richardhaen 2 жыл бұрын
Very good video, I have a 220 v motor with 3 wires 1 has a 3 on it the other 2 r not marked. How do u find out which 2 wires r hot. Nothing on the wire plate? Thanks
@briansmith7094
@briansmith7094 5 жыл бұрын
another awesome video, good job!
@snaprollinpitts
@snaprollinpitts 4 жыл бұрын
Great Video Jeremy!!! thanks
@websurfer44
@websurfer44 5 жыл бұрын
Great Video! I'd add when they talk about the motor insulation rating; they're talking about the electrical insulation of the windings if I am not mistaken rather than any kind of temperature insulation as we have in our homes and around steam piping..
@alfredomarquez9777
@alfredomarquez9777 4 жыл бұрын
Yes of course. It would be obvious for most people!
@mtz9939
@mtz9939 2 жыл бұрын
Great video my friend. Very informative.
@johnwagner8465
@johnwagner8465 3 жыл бұрын
I agree with the person called a tower...the guy is very good
@simonhopkins3867
@simonhopkins3867 5 жыл бұрын
Very informative video thanks thanks bud.🍺
@blanst01
@blanst01 4 жыл бұрын
Very interesting AND usefull. Thanks 🙏
@neosandi6
@neosandi6 7 ай бұрын
thenx to you all ps. from Croatia with love
@alphajuliet5697
@alphajuliet5697 2 жыл бұрын
Just incase u still wanted to know, Treadmill motor energy is measured in horsepower (HP) and can be sorted into three different rating systems: 1. Peak Duty: Generally the weakest. “Peak” stands for the peak horsepower that the treadmill will reach and no more.
@ryanhatfield3938
@ryanhatfield3938 5 жыл бұрын
I like the sound when you put a note up :)
@Jeremy_Fielding
@Jeremy_Fielding 5 жыл бұрын
Some one recommended it... a lot of people listen to my videos without watching them. And several have complained that I put notes on the screen but they don't know I corrected something. Then someone said "hey could you play a sound when you add a correction" I loved it.
@ryanhatfield3938
@ryanhatfield3938 5 жыл бұрын
@@Jeremy_Fielding Ha ya, I was the one who suggested that, I was just being cheeky. I like the sound you picked, I think that's a good choice to start with. Did you record the sound yourself?
@Jeremy_Fielding
@Jeremy_Fielding 5 жыл бұрын
DUDE! Thank you again for the suggestion. I love it. You see I played it even though I didn't get to use it to correct anything... I downloaded it from a sound library. This one is really close to that soothing smooth chime I am looking for. I am going to change it a little before the next video.
@DrivewayWorkshop
@DrivewayWorkshop 5 жыл бұрын
Love your videos Jeremy, thanks
@TC-bq5ri
@TC-bq5ri 5 жыл бұрын
Top notch as usual!...this vid forced me to buy a T-shirt😁
@donovanborja2663
@donovanborja2663 5 жыл бұрын
You are AWESOME.
@crosby3108
@crosby3108 2 жыл бұрын
This is great but you did not mention capacitor, i wanted another one of your videos and found out my bandsaw has a bad capacitor, i don't have a cap in the information lable is there anyway I can calculate the size of the capacitor
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Rewiring Motors for 110V / 220V
16:06
Clough42
Рет қаралды 170 М.
How to Read a Motor Nameplate
9:46
VFDs.com
Рет қаралды 240 М.
Get Your Motor Running: Testing A Start Capacitor
14:38
Enduring Charm LLC
Рет қаралды 100 М.
Why Japan’s Outlets are Safer than USA
12:32
Andrew Lam
Рет қаралды 35 М.
How to read a Motor Nameplate (IEC standard)
8:37
ElectricalEngineeringPlanet
Рет қаралды 22 М.
Motor Basics
28:41
Yaskawa America - Drives & Motion Division
Рет қаралды 539 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН