Jerky or Noisy Motor? Try this Motor Quick Fix!

[@thedogememesproductions6354]

there needs to be more videos like this since alot of people need this type of help, much respect for you my friend🙏

[@FalconpevSg]

Thanks for the feedback!

[@jackpower9279]

Very true this guy is a star

[@P0C]

THANK YOU SO MUCH IT WORKED! you are the only person on the internet that explains a proper fix. subscribed

[@cablemanagement1524]

you're the best! combination #4 was the one for me. i'm using a bldc driver that's designed for CNC spindle motors (which i'll eventually put into a waterproof enclosure), so i wasn't sure if the loud rattling was because it was the wrong type of driver, but you made it easy!

[@jacquelineshoup1940]

Only video I could find with the same problem, mine ended up being that one on the blue wires was broken off , fixed it and back running. Thank you !!

[@FalconpevSg]

Wow the whole tube and only our video could help you solve it?

[@SanDiegoBrim59]

Thank You SOOO MUCH ! My Wife’s E-bike Was Only Rode Once Before It Became Inoperable. For Weeks It Sat While I’m Clueless. This Tutorial Helped Extremely !!

[@FalconpevSg]

@@SanDiegoBrim59 no problem

[@musicconnoisseur9400]

Man you are a LEGEND in 2023 you help me resolve the issue with my 60v Currus Panther as it wasn’t running smoothly so many Thanks Man and I left a like too😎

[@derek488]

Thank you good sir. I'd tried swapping phase wires in all the combinations as other guides show, but your info on the hall wires was the piece of info I was missing. Got it all working now 👍😃

[@FalconpevSg]

Thank you glad we could help!

[@tomt1871]

Swapped 10x controllers into 8x. Front wheel turns backwards,Tried all combo s ,only one work but it overheated and burned the wiring. Tries the hall sensor swap but still running backwards

[@denkorea]

yooooO!!!!! you saved me man! So I bought a new controller which didnt have a "learning feature" (thats how my chinese seller call it) - my wheel was spinnning in the different direction. Combination 4th worked! thank you so much for your work! god bless you brother

[@FalconpevSg]

Pls do help share

[@Cointech1]

fixed my 72v 60amp setup with the swaping of the two hall sensor wires, though it was a different phaze wiring combination for me.it still worked so thanks for that 🤘

[@FalconpevSg]

Good stuff! let us know what other ideas you have

[@ahah1785]

Holy fracking cow...dude thanks alot one of the combos made my motor run butter smooth....thanks alot¡!!!!!!!

[@Trailfloater]

Will this work on and scooter or just the 10x

[@FalconpevSg]

any scooter

[@Trailfloater]

@@FalconpevSg thanks so much. So my motor is working but at times there is almost like a grinding sound then it goes away would this work for something like that or just if my motor isn’t working ? Thanks again for your time

[@James-ady]

☺️ I'm one happy man 😁 I've been working on scooter for like a week now and the other thing was the wheel wasn't moving now I've seen your video it working now 😁😁👏👏 Thanks you so much 👍🍻

[@SteveSmith-xf1ju]

This information is hard to come by, thank you for your help.

[@FalconpevSg]

Thanks for watching

[@bobongbmx]

It worked for mine! Thank you! It was so noisy before, now it's silently normal! But the top speed got lessened. Any ideas why?

[@skinnywhale777]

This video has been so helpful. Thank you so much for posting it!!!

[@orange42]

Videos like this are so helpful! Thanks!

[@FalconpevSg]

Thank you!

[@oliver-ce6zg]

Thanks alot for the video I am going to try this with my motor tomorrow . I am sure this will be the fix. Thanks man!

[@FalconpevSg]

Let us know how it goes. It’s not always the case where the phase wires are the issue

[@oliver-ce6zg]

@@FalconpevSg this wasn’t the fix, i think it is something with the hall sensor because the motor acts the same way when the hall senor is plugged in and when it is plugged out. Thanks for the reply

[@EdwardInTX]

This worked for me after swapping out controller!!

[@michaelwaldock905]

Thank you. This solved my problem. Interestingly my motor worked with only two leads connected?

[@paulpablow4538]

Thank you so much my scooter was juddering i done ALLcombos didnt stop juddering....then i put back to green green blue blue and yellow yellow and juddering stopped thanks again

[@doitgirl]

I loved your video, I still couldn't solve my problem but I still haven't touched the hall connection I'll check. however I am using a controller for 60v with a 60v battery also in a 48v motor I don't know if this is the problem, because they said that the voltage was not a problem. that's true? thanks

[@DaveK84]

Nice troubleshooting video, but honestly if I had this problem on what I am assuming would be a new scooter. I would promptly return it and exchange for one that is properly wired.

[@FalconpevSg]

This is actually more for upgrades of motor that we sell. You can actually get a stronger drive system and you need to do this to configure your high speed motor.

[@DaveK84]

@@FalconpevSg i see, that makes more sense.

[@TamFitz]

Excellent, fixed it . thank you very much.

[@garyt3hsna1l82]

been almost 2 months trying to figure out what happened and this was it, just unbelievable how simple it was, first phase wire change i did the motor worked fine i feel so dumb.

[@rchobby8734]

This guy is awesome it works you Just have to be Patience

[@swifttech7853]

Thanks bro, combination one worked for me

[@chrischris7595]

I have electric scooter i replaced controller but I don't know how to fix the dc to dc converter for light, horn,indicator brake light also no display on meter need help..

[@alexandresantos541]

amazing video, working now. but just continue with a problem I changed the cables the same way on the video as it is working but not fast enough. It looks like something is stopping to delivery more velocity)some jerky and noise at the beginning

[@nathanbrown180]

The second to last combo worked but the motor is running backwards. You show switching the hall wires when the wires are normal but how about when using the Blue-Yellow, Yellow-Green, and Green-Blue combo?

[@bhoemercado5077]

Hi sir mine is yyk 80a and my motor is 52v dual phase how can i remove the vibration when i first star my bike thank you for the answer

[@FalconpevSg]

Adjust your settings 80A might be too powerful.

[@santiagohurtado3572]

Hey FALCON guys, would be great if you do a video showing how to invert motor turn sense, useful for example when user wants to install brakes at the other side from original setup, thanks!

[@johnibrahim9328]

I have kugoo m4 i changed the controller with original one works fine but make very loud voice what that will be

[@FalconpevSg]

What kind of noise

[@janakawijesinha]

THANK YOU SO MUCH 👌👌👌 well explained

[@samnicholson304]

Thank you for this video got it first combo.

[@FalconpevSg]

glad it helped!

[@dr.moustafaibrahim6810]

Great explanation 👌 thank you

[@ToniMeg]

I have an soflow s06 with a custom controller, i have error e7, but its running and i think smoothly, i think the blue wire from the controller is loose than the otherones, i think it snapped of the controller, can u help me ?

[@501barako]

My ebike was working properly then one day it started going backwards. Followed the instructions. Now its going forward. However when I changed the hall yellow and blue my SW900 display went out of wack. I am walking my bike and the SW900 register 19MPH speed. How can I correct that.

[@juanswe]

Could you do a video how to change rear lights on Zero 11x? ja have issues, only 2 working and one of then its very week

[@FunnyVideos.11-o4z]

I have the same fault i believe , my front wheel motor just sputters like its in a lock state or something it doesnt want to run smoothly like before i dont know what happen , only after i dismantled the bike and then put all back together that fault showed up .. im gonna try like you did in this video ,, and also when i disconnect the ble wire from the blue wire in the air without no loae it spins smoothly and fast , but when i put the tires on the floor with load it sputters and doesnt spin

[@milordas]

maybe theres more easer way to get it smooth/reverse? ie. opening motor lid and checking wiring there?

[@FalconpevSg]

This is the easiest way tbh

[@Nexnz]

@FalconpevSg - does this work on a zero 9? where do find these cables? thank you in advance

[@gracjanjuncewicz6378]

Hi everyone. I got a jerky motor after a motor cable replacement, and none of these combinations seemed to work. What could be wrong? I need some answers as this is frustrating. Thanks!

[@joshnissan1272]

Thank you for this video.

[@FalconpevSg]

I’m glad it helped someone

[@tambayph9729]

Hello falcon , my e scooter can't run itself without pushing forward , what can i do to fix it? I have the kugoo kirin m5 pro

[@FalconpevSg]

Change your settings in lcd to not use kickstart

[@tambayph9729]

How to change it?

[@FalconpevSg]

@@tambayph9729 go into lcd settings mode, how? You should know better than me

[@bengabrielmaghuyop972]

is the jerky or noisy problem normally shows up after some time of use? I didn't do upgrades so should I still try to change the combination when I got jerky motors after 1 year of use? Hoping for your reply, pls.

[@FalconpevSg]

no, this problem will arise when you change the motor. when you get jerkiness after one year of use, it is most likely due to wear and tear of the bearings

[@madsl88]

What to do when the engine is running but when I step on it it looses power going from 25km to 8km/h?

[@FalconpevSg]

What do you mean step on it

[@madsl88]

@@FalconpevSg as soon as I put my full body weight and try to ride. I don't exceed 80kg, it says up to 100.

[@morrisvelasco4865]

My sealup q7 jerks when in gear 2 and 3. What is the solution? Can you help me please

[@ggwellplay3d992]

its okay if 2 face wire only? my motor perfect work when i remove yellow face wire

[@FalconpevSg]

The 2 phases may not be enough, have you tried riding on it?

[@Kolors_of_lyfe]

Hey my kaabo mantis 10 pro is droping power on and off when i accelerate,the battery seems ok i keeps charge can you suggest what may be the issue?

[@FalconpevSg]

It’s battery issue. Your battery is Aging

[@osbodav]

Can't you short the hub by changing wires like that?

[@FalconpevSg]

No you won’t, you will only short it if you connect both wires of the same phase together

[@chrischris7595]

My controller gets very hot 🔥 and motor not running smoothly..

[@FalconpevSg]

connection is wrong.

[@davidworrall3653]

Hi !! I just but Wolf King and everything is work good and after 20km the rear motor stop working and begin to bloc and jerking like in this vidéo?? Need help

[@FalconpevSg]

Something melted or burnt. Possible reasons: burnt hall sensor inside motor but unlikely. Burnt mosfet inside controller most likely

[@davidworrall3653]

@@FalconpevSg thanks i will return tje scooter i tink

[@FalconpevSg]

@@davidworrall3653 we would recommend a VSETT instead

[@davidworrall3653]

what is a vset instead?

[@davidworrall3653]

okok the brand off a scooter perfect

[@harabas3813]

Is this applicable to any brand or unit of electric scooter?

[@amirouw]

hi man i got a kT 36v Foc controller with an LCD screen G51 and wired it up to my scooter .. it rattles and in some combinations it doesnot get any speed. the seller tels me its more compatible with electric bycicle engine ....and not ans scooter motor .... is it true?

[@FalconpevSg]

@@amirouw check if motor is compatible firstly. The controller might be for geared motor

[@amirouw]

@@FalconpevSg this is what company told me at last ... you mean its impossible to wire it up to a non-geard motor? isnt there any firmware update or changes that or even reprogramming to make it work for fancy scooter motors?

[@FalconpevSg]

@@amirouw no it’s not possible to change from geared to non geared motor

[@consoletantreviews8181]

Does wrong wiring will cause shortage to the moto

[@FalconpevSg]

@@consoletantreviews8181 no it won’t

[@consoletantreviews8181]

Im here again, why when fully throttle my back motor hub starts vibrating like crazy it's so uncomfortable.​@@FalconpevSg

[@FalconpevSg]

@@consoletantreviews8181 either your tire or your wheel is not balanced

[@consoletantreviews8181]

@@FalconpevSg now i noticed that my tire is near flat🤦

[@consoletantreviews8181]

​@@FalconpevSg when i try your combination why mine get smoked. Im scared to fry my motor hub.

[@markmilingo2474]

My scooter runs but at times during start, the motor rattles, how can I solve this

[@abdullai123]

Thanks friend respect

[@FalconpevSg]

@@abdullai123 thank you for your encouragement

[@chrischris7595]

Nice job..thank you

[@brendonali1288]

My motor hub was working for 3 days and now won't move at all its a bafrang hub peddal assist just looking for answers why this has happened

[@darkbloodgt6577]

Can u do a video for a Q30 I have the same problem I only had the scooter for one day

[@FalconpevSg]

Did you buy from us

[@darkbloodgt6577]

@@FalconpevSg daily sport direct

[@FalconpevSg]

@@darkbloodgt6577 so get daily sport direct to do the video for you?

[@darkbloodgt6577]

@@FalconpevSg dude I didn't ask u to do a video I only ask did they they have a video out on the brand of scooter but your rude ass can have a good day oh get you family to tell u have a good day

[@MarvelousYoUnAstro]

Why would my wires melt and the motor give out? Lose connection??? And would this help if I tried? It was working fine the entire summer... 😔

[@derek488]

Resistance causes that. Can be cause by connections that loosen up over time or corrosion between the connections. This wouldn't fix that.

[@MarvelousYoUnAstro]

What can fix this??? New computer???

[@derek488]

@@MarvelousYoUnAstro just new connectors

[@MarvelousYoUnAstro]

I'll try that and see... thanks brother!

[@farhanshafiq9621]

I have janobike t85 2800wX2 today rear motor started to make burly sound and stopped working please help

[@FalconpevSg]

1. Check the motor wires are not melted or burnt 2. Check if there is any resistance in the motor

[@darkbloodgt6577]

Is this only for this scooter

[@FalconpevSg]

For any scooter

[@darkbloodgt6577]

@@FalconpevSg so this is why the M code is showing

[@nazrulnaz823]

Omg,, thanks bro,, u awesome,,already subscribe ur channel.. tq

[@bilaltahir4085]

My ebike motor make vibration when i reach at 25km/h what is the solution?

[@FalconpevSg]

Check tires, check motor balancing and then check wire connection

[@aidenCBR94]

Hello I have a Zero 11x and motors don't drive forward when using throttle, it very jerky and needs to be pushed to accelerate in the right direction, thoughts?

[@FalconpevSg]

Controller burn

[@aidenCBR94]

@@FalconpevSg it is brand new out of the box? Have only moved it few km, but was like this first ride

[@FalconpevSg]

@@aidenCBR94 although the 11X motors are what we call sensorless, meaning they will be more jerky than motors with sensors, it shouldn’t be so jerky that you feel it. Where did you get it from

[@aidenCBR94]

@@FalconpevSg I got it from IwheelEUstore on Ali express, I have already emailed them but no answer yet, wanted to ask your opinion, if I am on scooter and I try to accelerate, it will not go forward for 1 second it will jerk a bit backwards then start moving forward, really dangerous in traffic, only when I push with my foot does it go smoothly

[@nooneelse1837]

My motor spin nicely in air but when I go on a ride you can hear the motor screaming like an airplane vroom vroom it’s too loud I can’t find out what to do I checked all sensors even replaced them still same problem 😢

[@FalconpevSg]

@@nooneelse1837 did you check the hall and phase combinations?

[@nooneelse1837]

@ yes , 9 hours me and a friend of mine tried all possible cable combinations including the hall sensor wires bro

[@FalconpevSg]

@@nooneelse1837 did you recently change your controller?

[@nooneelse1837]

@ yes I have purchased a after market controller as the old one had its mosfets burned out , new controller has 2 wires you connect together for the first time you connect new motor it’s called self learn so it can read the sensors but it’s not helped either still the same

[@FalconpevSg]

@@nooneelse1837 self learning controllers are not suitable for all motors. Your motor is incompatible with the controller hence there is no torque

[@mr.mosey7585]

Than you

[@Haiduk1985]

I dont recommend to swap by place the PHASE wires. The wires on the load are geting hot at the connection piont and in cases starting to melt. The result can be a short in wires. (TESTED). In ignoring the wire melt - the controller at the same time is geting realy hot and in my test case it did automaticly switched off (protection). It was the ZHIPU controller wich are good made. Its the Mosfet fault - wich needs to be changed.

[@FalconpevSg]

We use special connectors which can withstand up to 200A of over current

[@Haiduk1985]

@@FalconpevSg The wires are getting hot and the orginal connection is the weakest point. Ok - you swap the connections, but still use the same wires. And if you have upgrated connections - you think the video excited viewers will?

[@FalconpevSg]

@@Haiduk1985 you have your opinion and we respect it but I think we have the experience.

[@Haiduk1985]

@@FalconpevSg Im talking of mine experience as a service tehnican in scooter workshop.

[@jorgeluisvazquez1975]

no explicate no to much .

[@FalconpevSg]

??

[@jorgeluisvazquez1975]

@@FalconpevSg i see other video explain much better more technical

[@jorgeluisvazquez1975]

@@FalconpevSg nothing said to

[@FalconpevSg]

ok so our video is no good? @@jorgeluisvazquez1975