New Subs and we messed up

[@greenreaper8663]

I don’t understand the hate, no matter who you are someone will always have a bigger more expensive setup. As long as you like it and you are happy, that’s all that matters! Life is hard enough as it is…Appreciate the channel JAL

[@hemiram007]

Man you ain’t wrong about Bassheads on a Budget. I just joined a couple weeks ago and it really is a hate group. I didn’t know if you ran Skar you were poor. So many experts, so little good advice.

[@joshholden8561]

Totally agree I hitting 151 db with 2 skar 12s in my Scion TC I hear ALL the hate.

[@angstyq]

@@joshholden8561I get that I never personally liked scar so I guess I’m a hater although 151 is damn good bro!

[@Chuck_Sanders]

​@@angstyqnah, you're not a hater... you just don't care for the brand. Everyone has brands they like and ones they don't. It's what keeps company's around for everyone. 👍

[@GMTPF800]

Glad to know that o would never join that kinda negative group of DUMMYS!!!!

[@Antonnn1111]

Nothing wrong with skar, and this is coming from a dude who runs all sundown and FI and used to run skar. However I will say it’s worth paying the extra money for sundown, there’s plenty of videos showing proof you gain at least 1db directly swapping subs, same box same power sundown is louder. Has to do with more motor force higher quality soft parts more Xmax it’s just overall a more efficient subwoofers but for the money skar is really good and sounds decent

[@SbassLaser]

I love spax screws! never have a problem with them as long as you use the right size bit

[@Justduckingaround]

All in all I loaded 16 - 15’s Sunday, Jerry you know at this point we family bro.

[@JerryAintloud]

indeed..

[@jasondecluebass1012]

​@@JerryAintloud I'm seen my shit fuck break in

[@joshholden8561]

I always use threaded inserts lines ur subs up perfectly and hr can pull them out 100 times and not tear up ur wood.

[@Angel_xXx_76]

Who else uses red for negative? I had no choice due to the red leads being shorter on my AB Hawks and not reaching properly to my binding post. So red is the negative on my setup! Thanks for the awesome content sir.

[@davidbrennan5]

I have done things like this in the past but I would wrap the ends near the connection points with black tape for about 6 inches to a foot to show that the wire is a negative and leave the positive all red. You could also spray paint the wire black, this is more or less so others can understand your wiring without a diagram.

[@1-Six-dee]

Ppl without tight walls will never understand the struggle of wiring subs and balancing in on a baffle while trying to keep it from moving while pushing in terminals 😊

[@JerryAintloud]

Facts

[@GetChippy]

Preach

[@iChubbs_81]

I would start booting all them haters out of bassheads on a budget....im an admin in sundown audio buy/sell/trade,sundown audio spl,and loud af...i boot them people hating and spammers with a quickness...should be a zero tolerance in car audio...Theres no place for them

[@samuell.7552]

Glad you didn't poke that Sub with that screwdriver. I know that feeling all to well. Keep Bassin on!!!

[@OgTripleOGFunkEE]

BEST ON KZbin!!! Needs way more credit FOR REAL!!!!

[@JerryAintloud]

thank you

[@davidbrennan5]

Awesome job Jerry, we all make mistakes. Live and learn. I am glad the subs are doing a good job for you. I don't hammer on new subs....

[@cristovalmontoya5222]

I like the recessed look but fit me I’m gonna keep my subs on a flat plain lol.

[@diondrehenderson1853]

So very true about bass heads on a budget.

[@russellcrabtree5314]

Have you heard of Acoustical Designs Inc. John Dayeh is the West Coast builder for D4S and builds beautiful boxes. Just wandering!

[@jerryburchard1512]

I just finished your last video and noticed they were out of phase. Come to this one and you fixed it

[@ChrisCamp-i3q]

Usually if you hook it all with the same on all no matter which side I'm guessing as long as it's wired all the same they'll be in the same phase but it'll sound better and correct wiring the positive wires to the positive terminals and negative the same! Lol I always if the wires are the same color the gate will be different

[@jimmyjam5588]

I love my ds18 mids and high and my dsp from them and the g series 4 channel amp 💪

[@yougod7253]

I think you got it right.

[@justinboone8700]

I love my Philips deck screws never failed on me yet got two platinum 15s on 8k .5. I set my black and decker drill setting to 10 and let her eat

[@DBfloyd]

#1 fan right here!

[@JerryAintloud]

Thank you

[@ChrisCamp-i3q]

Yea I hate those silver wood screws the black ones ( not the dry wall small tight threaded ones) the regular ole black wood screws are the best for lol wood!!!

[@SkookJambo]

1000% correct about bass heads in a budget keeps up the great work ! Love the content ! Im working on being windy with a single 12 !

[@andymarshall4014]

I don’t care what brand it is. Long as it sounds clean and works I’ll run it.. I started basing again last year. Started with a sundown x8v3 and was let down because of my stupidity. Ran a Skar for a week hated it. Ct sounds meso for a year. Just sold it to order 2 ct meso 12s for a lil ol civic

[@z1berzerker]

Finally get 🙌 to figure out Jerry's box layout 👍😎 definitely not the norm 🎉

[@z1berzerker]

Schwindy 🌊🌊🌊🌀🌀🌀

[@jermainephillips5179]

I don't post on half those forums because of tge mr know it alls..I hear ya there Jerry..😂

[@DarrinLintz710]

Shit 2 days ago I wasn't using deck screws like I normally do. I slipped and went the the surround on 2 subs I just reconed 😂

[@SBK_ALL_DAY]

bass on

[@jarvisklocke7155]

Forgot to mention my amp. Right now I have a Ampere Audio 7500 and will be getting more or getting a AA 5000 for each one which would be wored down to .5. My electrical is going to be top notch. My only thing is that getting a toyota alt i can ONLY get a 250amp. I have one for my 18 Highlander

[@charlesparkes7546]

First off love the info and basshead general cool shittedness (custom words lol) I actually work for altenloh brink and co. Aka Spax. Just for my own peace of mind what size screw are you using. My go to is usually 14x2 or 2.5

[@charlesparkes7546]

Ps I've run it all from old jensen XS to sundown it don't matter how hard you can swing your wallet have fun and be loud

[@JerryAintloud]

#10 x2” and they have a small T20 head half the heads stripped on removal. New torx bit from Dwalt as all other brands use T25

[@Basstaco69]

Why did we hit the vape at the exact same time lolol

[@JerryAintloud]

😂

[@imafreekid8310]

you got me rethinking my build i was gonna do 8 10s ina 6th order but now ima do 4 of them 15s ina 6th thanks i love windy builds great job

[@JerryAintloud]

These EXL XX are getting stupid

[@kappafire4201]

It’s a learning process !!!

[@Djhussle310]

I’m running nvx

[@eversoul43]

I have 2 exl xx12s and it's outta hand. 6 will put u in another dimension.

[@jamesknotts8029]

No hate here Jerry I'm running some audio pipe 15s right now and just love the bass

[@jeffshaffer8284]

I was wondering if you knew anything about the hooliganx subs I have 2 and can not get them to sound right I'm kinda in your area any help would be appreciated

[@1-Six-dee]

Man those subs seem to doing a great job, especially brand new, I was pretty doubtful because of the motor size but I gained a db by break in and reduced my Temps by 50%, I need some help with my front port, my truck is absolutely flat from 28-45 which it really should not be

[@johnd5542]

Id rather have it flat like that for my daily. I am 146dbs from 28hz to 42hz. I peek at 32hz 148.5. All on music.

[@1-Six-dee]

@@johnd5542 this is a demo truck that I really want to demo low and it does it does a 58@18 and then kinda dies down by a db to 28 then it is flat up until it rolls off around 48-50hz,i want the hi end to burp around 42 so I can do some good #'s while still playing low, it is 6-18's on 40kish

[@ChrisCamp-i3q]

Hell I'm thinking about try the db drive g7 subs

[@ChrisCamp-i3q]

Looked like the spider was gagging dawg

[@TheAlienworkshop34]

I use to be a such a hardcore sundown fan but nowadays if it hits hard and makesna wind tunnel i dont care

[@1-Six-dee]

I love spax except for the small t10-t15, I like their lag screws the best but it doesn't take a lot to strip one then gotta drill them out and they r tough to drill

[@JerryAintloud]

That’s the issue I had

[@GMTPF800]

Yep...and thats wy i take my chances with philip heads still

[@no_one_special_5407]

Hell yeah man it's looking good , I'm running a ds18 15 hooligan X the new he one that's black but I got to build a new box for it cuz it's already flexing the 1.5 inch mdf box I built but I'm hoping 1 25 inch long 6 inch aero port will work on it in a 2.53 box but idk but I know I got to do the electrical cuz the older ds18 amp is dropping it down to 12.3v when it hits hard and yea I'm looking at js now lol

[@johnd5542]

I would go with 8"port if you can fit it. I got 400amp Js Alt 9months ago, performing great.

[@jeffshaffer8284]

I have 2 12 inch hooliganx can't get them to sound right 3.9 cube box 4inch aero port lots of port noise they are tuned at 30 need ideas to make them sound better

[@no_one_special_5407]

Thanks guys ans I was thinking about running 2 6 inch ports at 36.5 inches so it would be tuned at about 30 ish hz but I tried to get them from B.A.P. but the site wasn't working so I had to get one off Amazon but if I run one port at 25 inches the port calculator thing said it it should be tuned at 32.01hz but idk how true that site thing is oh and I got that 320a alternator from JS in my cart right now just waiting on some more OT lol

[@cristovalmontoya5222]

@@jeffshaffer8284 for 2 12s the hooligan x there biggest sub is do a 5 cubic for box with about 65 to 80 inches of port.

[@PaulSmith-mt4eh]

Hey Jerry ain't loud love the videos but I have a question I would like your response on. I've got a 2012 civic sedan with a down4sound profab ported box with 2 sundown u 12s on a jp23 at 1ohm. My question is would 1 sundown xv2 12 be as loud as 2 u 12s with 2 jp23s strapped trying to lose some weight. Take care and God bless 🙏

[@jimmythebudgetbuilder7197]

What’s that you smoking?damn that looks delicious 😅

[@SkittlesScott]

if those subs plays the lows that good I wounder how one would do in my trunk? I want to put it in a 3.4 cu.ft box tuned to 25.6hz. not sure if I should tune to like 27hz and have to box be bigger. I love the low notes; As of right not I think I am getting around 130db at 23hz which makes my hair wiggle in the window, I want more pressure. Any thoughts?

[@74midwestbass74]

👍👍

[@Kenmarshallintereststx]

I've made lots of mistakes with polarity wiring issues but never red and black 😂

[@Kenmarshallintereststx]

I've always wondered about blue and white thank you for sharing that how about green an black I'm guessing black is negative in that instance also

[@Kenmarshallintereststx]

As well as the information about spiders and. Breaking subs and you're not joking the smell does go away eventually if you don't blow them😊

[@JerryAintloud]

the issue was the blue and white wire, Duston thought white was + but blue is so he wired them backwards. then on red and black he used red for + when it should have been black + since the other 5 were wired backwards.

[@Patrick.w.p]

Love the content I'm running 4 mtx audio 12s on a 1000watt amp now this is a budget build and it sounds great for what it is I'm looking to upgrade any donations would really be appreciated

[@iChubbs_81]

Why didnt you swap positive/negative at the amp

[@JerryAintloud]

6 subs 4 amps but only 1+ and 1- per amp as they are strapped

[@cedriccrawley8069]

Glad you didnt bash anyone over the mistakes that were made. Im sure we have all screwed up a few times just learn and move on!!!

[@mollzyie]

Not really a mistake when the wires are miscolored … dark = negative to anyone with a brain.

[@504boxing]

bro you are 100% correct on that group on fb, i wont even mention the name of it.

[@ChrisCamp-i3q]

Hell build the port to 12 inches lol

[@chadbeverly4926]

You should switch to the hooligan if you like the EXLs

[@tcorley7477]

You said it sou ds muddy. What do you think about 2 or 3 15s running daily?

[@JerryAintloud]

High xmax subs all sound muddy compared to subs with lower xmax

[@teepressifer]

is the dual 4s ds18a a true dual 4?. i need 3 of the same 15s

[@JerryAintloud]

Yes

[@rwhipple73]

What happened with g2?

[@JerryAintloud]

Out of business

[@jarvisklocke7155]

I have a question for you Mr. Jerry Ain't Loud... I'm thinking about getting either a 05 or 07 Sequoia. My teammate told me that if I get it he recommended me getting 4 15's rather than getting 6 12's. I'm going with DC LEVEL 5's for the subs. My setup is going to be a no wall. What do you recommend sir. Thanks for your time, help, and for responding. I watch your vids EVERYDAY. I live in Fayetteville NC and I would love to give you a demo once I get my ducks in a row.

[@gmanswinny4501]

Are these 4 ohm or 2 ohm subs? Plan on getting 2 of these 15's

[@carsonfischer2116]

Love my exl xx 15s!!

[@camaintloud7580]

Jerry’s head is too big for the port 😂😂

[@JerryAintloud]

Kinda

[@walledrodeo8126]

Do u like those ds18s better then last subs

[@JerryAintloud]

so far yes

[@DBfloyd]

You've convinced me, I gotta figure out how to afford these asap. I need more ds18 in my build anyways. Can't be team ds18 and only have doors.

[@JustinGrosz]

Dont learn unless you make mistakes

[@chadgardee1496]

Kind of look like Steve meade 😂

[@rogerdavis9607]

I made a mistake a few weeks back and it cost me an amp. Good thing i have a back up amp. Lol.

[@mineprixelz9697]

Yo you said you had some 15s I need 2 brother

[@JerryAintloud]

[e-mail]

[@huntermartin]

[@ChrisCamp-i3q]

Sagging a bit man idk just trying to help

[@OfficialMrGameX]

yeah i left that group a long time ago. them guys basshead on a budget are trashy.

[@willrussell2970]

Ds18's all Hispanics run them. Must be a gangbanger brand. I would never run them. Not my flavor. GO SUNDOWN HELL YEAH!

[@JerryAintloud]

that's what's great about audio there lots of brands for everyone..

[@dirtysouthwookie5512]

People from all over the World run DS18. Hispanics aren't even our main buyers by a Longshot. By the way, we sell x3 as much as Sundown does every year and growing more by 20% a year or more.

[@TowGoat]

Such a wack statement DS18 is ran by many folk’s

[@lee28.78]

Oh come on that sub is not heavy..#noballs!

[@JerryAintloud]

I’m old😂