Wheel Bearing replacement 2006 Dodge Charger RT 5.7

[@HandyHudsonite]

My son just bought a Charger, and this was the exact video we need to get it done! We'll be working on this project soon. Thank you.

[@ahmedsaidu-kamara6760]

Awesome video. I will recommend you using a jack stand the next time you jack your car up for an extended period of time. The clicking noise might be the CV joint, parking brake need adjustment or both. Grinding noise is usually related to wheel bearing so if you had this noise, changing them certainly took care of that. It's also a good idea to replaced both sides so they wear together. I need to do this on my 2012 Dodge Charger SRT8. Thanks again for a very good video.

[@johnjanes2886]

verysilentfarts yes there is im working on a 07 rt charger and its independent rear suspension so it has cv axles in rear

[@allstetic2]

right

[@allstetic2]

correct

[@williamcattr267]

When you wiggle your tire as you suggested, how do you know if it is the wheel bearing or a ball joint? Ball joints on these 2006-2010 Chargers seem to go bad (I've had to replace my ball joints twice in 12 years).

[@wethenorthnorth1632]

Thanks bud I’m doing my rack and pinion and same thing I just did but I gotta do my rodors too thanks again ur vid really helps bro

[@shill1444]

Damn good video man! Thank you. Just saved me 500 bucks.

[@rocki__maa7549]

Also, Do you have a video on how to check and replace tire rods just in case I need to do them. I am replacing my rear bearings, but want to check my front tire rods too.

[@rocki__maa7549]

Could you do a list of tools and parts you used? I'd really appreciate it. I have to do mine and I need to buy tools, I've been doing a lot of my own repairs, but run into trouble with knowing what tools I need sometimes. Kind of tired of borrowing tools too.

[@nflalphamale3094]

Thank you so much your video was so much help. you were a great teacher i just replaced it for the first time bro thank you so much for the lesson and laughs lol

[@DevineDurans]

Dishun Wiley very welcome. Lol stoner moments.. ahhaha

[@nflalphamale3094]

😂😂

[@Marvinsilcott]

Great videos on the mechanics of your charger; Please keep them coming! I have a 2006 300C with original everything with only 70,000 miles and I try to do all of my mechanical repairs. Did you ever find out if the tie-rod was shot? My front end has a "wobble" when I go over rail road tracks and when I decrease my speed off an interstate ramp, I have a lot of shimmy in the wheels. Any suggestions of what it could be?

[@beastfromtheeast9318]

Dang this dude doing it in the apartment parking lot. I remember when I lived in a condo working on the car in the parking lot and it sucked. Finally got a house with a garage

[@DevineDurans]

yep, i too had a 3 car garage 2 story.. then an apartment. now own a home.. oh and before all that as a teenager i took my car to car shops... yeah stages of life dude. thats how humans become mechanics.. thats for evaluating others.. i remember i use to judge others, now i focus on myself and family and help others.,... i also remember when i didnt have jesus in my life... i cant believe you dont have jesus in your life....

[@beastfromtheeast9318]

@@DevineDurans huh? Not sure where that came from. I was complimenting you for grinding the work out even in unfavorable conditions.

[@rphillips49]

Do you turn the hub nut the opposite way for the drivers side in order to remove?

[@JCAchannel100]

Love your car. 06-07 RT chargers are my fav

[@DevineDurans]

thank you, my favorite years as well. hate the new body style...

[@allstetic2]

dont buy one engine blows up bout 80000 look it up

[@allstetic2]

spread the word

[@wesleyd.7433]

@@allstetic2 strange my 06 R/T turned 160k mi the other day and dont remember it "blowing up". But ill spread the word some people dont know how to maintain their cars and any car can fail... Look it up. Spread the word.

[@wesleyd.7433]

Please help, for some reason my Chargers tires smoke bad when floored. Any idea whats happning?

[@GUAYAPA]

Nice video and explanation, thanks, only when i do something like this, i put cartoon for to absorve oïl dropped .

[@MrCougar214]

Before you replaced the wheels hubs, were you getting a clicking noise from the wheels when you would make a hard turn? Sorta the same sound you would get when a CV axle was going bad?

[@tombanes]

He does not have AWD on that vehicle. No CV joint.

[@MrCougar214]

@@tombanes I know there is no cv joints. That's why I was asking cause I get a clicking sound in my left front wheel when making a hard right turn. With the car being rear wheel drive, there are no cv axes in the front(Which makes that sound when they go bad). So If I have no cv axles then what is making the clicking noise when I make a hard right? My brain is telling me worn hub barrings but I was looking for a second opinion.

[@tombanes]

@@MrCougar214 I am so sorry I re -read your post. My reply did not apply. Guess I was tired looking at all these videos and posts. Did you ever find your problem back then as it was 3 years ago. I am trying to diagnose a noise that is very hard to hear that I thought was the front right bearing on my RWD RT with only 50 k . The noise mimics the sound of my exhaust but is vehicle speed related and hear it most at 12 MPH . Spinning all wheels off the ground and move the tires back and forth show no play or noises. It might be my carrier bearing on the drive shaft but I cannot replicate the noise with the car jacked up.

[@MrCougar214]

@@tombanes no. I never figured it out or got it fixed but I have had no issues with it surprisingly. I will get to it one of these days.....lol

[@xtmg2010x]

You have to get the hub and bearing together in one assembly? I have a 2010 Charger. Also one way of telling your bearing is bad is Brindling on the race. The balls them selfs will not show any wear.

[@DevineDurans]

yes it comes all one piece together. Bearings already greased as well. does not hurt to add more grease before installing..

[@ericmorinmusic5910]

Great video man!

[@Dirthauler65]

Is it common for them to smell hot afterwards? Mine did.

[@DevineDurans]

oiljerk did your come pre greased? It's always good to add more

[@Dirthauler65]

Hmmm, I believe it was, I can't see why they would sell one that needed to be greased.

[@allstetic2]

no!

[@colemansteven6246]

Replacing is that simple? Possible same chassis or same procedure as 2006 chrysler 300c?

[@DevineDurans]

yes, same procedure. and yes that easy a caveman can do it. lol takes no time at all.

[@MrNusouth]

great fuckin vid, thank you bro!

[@DevineDurans]

Kedar. Thank you, hope it helped.

[@MrNusouth]

It does, i plan to change the brakes, rotors and wheel bearings this weekend on my 2006 Magnum RT...thank you again for the vid

[@robertboden8406]

nice vid. Would you midn either posting or telling me how to do a rear wheel? I'm told its a lot harder and more time consuming

[@allstetic2]

correct

[@colemansteven6246]

Have u ever heard of or seen the bearing race part being hard to get off the spindle or even stuck on?

[@DevineDurans]

the spindle nut? no my came off pretty easy, however the dust cap that keeps dust out of the spindle I hade to use w40. if moister or degree gets in it im sure it could cause that and or really worn bearings. make sure when you put new ones on you torque to specs.

[@Albertojedi]

That baby looks like new. Is it the original paint?

[@DevineDurans]

Alberto González yes. 2006 barely hit 100k miles. New Hemi engine only has 8k miles. garage parked car low miles. never park her in direct sunlight.

[@Albertojedi]

Jesse Duran Excellent job. I have a 2006 Chrysler 300C with 56k miles on it. The paint is nowhere as neat as yours. But it parks in direct sunlight. Even though I use to cover it, the paint has somewhat bleached out.

[@shill1444]

Jesse Duran - How much did it cost you to drop the new engine in there? I'm at 120k, no real issues but I was thinking about putting a new HEMI in eventually. I NEED to keep this body, don't like the new ones.

[@chrisd9961]

That little knocking noise that is your ball joint

[@efrenbarraza4314]

I don't care if the wheels fall off... I did it! bro you' swear haha should post more from your charger!

[@efrenbarraza4314]

Saw you highlighted might do this today, but you know what would make a clunk noise every time I press on the brake and I slow down to a stop?

[@vickvam3412]

Control arm bushings

[@burnsred2172]

"Fiance's Husband" 😂

[@fatihmehmetomayer919]

ulysses cooper 😂😂😂

[@tonyt.5771]

Would this be the same procedure on my 2005 300?

[@DevineDurans]

Tony T. I belive so. like 90% sure.. lol

[@BRONXNY68]

That play is inner tie rod end

[@allstetic2]

the play was vert not hori

[@mandoalcala6344]

your fiancée husband huh? lol made my day, thanks for the awesome video. saved me a pretty penny,shops are charging me 1500 to do the bearings and ball joints.

[@DevineDurans]

Mando Alcala Hahaha that would be odd if I my fiance had a husband. hahahaha a lol yes glad it helped. very simple task. and saves alot of money..

[@ultrariz3000]

Peter Griffin laugh around the 2:19 mark. Great video though thank you

[@1TheMacedonian]

Best fu**ing video dude thank you my man

[@guerosern]

Cool thanks !

[@jessewood5414]

so did that fix your play?

[@DevineDurans]

no it seems that the wheel bearings were not the issue. I still have clinking and clanking and a shake while on freeway.

[@DevineDurans]

I still have the same play as i did before replacing wheel bearings..

[@jessewood5414]

Well, that's not encouraging. Mine has a bad vibration when driving straight over 50mph but if I turn to the right a little it goes away. I'm thinking it's the bearing. Your video is helpful, thx

[@DevineDurans]

+Jesse Wood very welcome. sounds like the bearings. doesn't hurt to replace though. good luck I hope it works.

[@chrisd9961]

Las Vegas

[@colemansteven6246]

Ok kool. Thanks 🙏

[@justinarroyo8044]

Have u had a problem with your pcm before

[@DevineDurans]

Jose Arroyo no I have not have any issues with my pcm.

[@Solisdany9]

My fiances husband lol!! 🖒thanks for the vid

[@movingearth3726]

My fiancee's husband .....hahaha gave me a good laugh

[@allstetic2]

i dont understand

[@ishish9283]

Warranties they're not even worth it I had a warranty on my cell phone I still have to pay big time out of pocket warranties yeah right

[@madebypapa3795]

The same like chrysler 300c

[@matarochas8410]

U didn’t check to see if it was strait

[@matarochas8410]

Tie rode

[@juancespede2001]

Lp

[@craigpennington1251]

Get a real camera with a tripod. Celphones are shit for recording.

[@3.6pentastardude81]

Dude learn to sew. Let men work on cars