jetboating tricks part 2

[@joepodunk284]

I don't know if this will get to you noticing the comments are 2-3yrs old, and ya! WTF with the wire! I wanted to THANK YOU! for these videos, I've been checking out these little rocket's in other vids but yours have really nailed the actual operating , maintaining and owning one all in shorter segments (unlike this comment,forgive me) Here in the Pacific N.W. we're all about Jetboats for fishing and recreation, mines a 20' Alumaweld 6° bottom with a 150hp Yamaha SHO that when the stars align I've gotten it to 52 mph and ran through ankle deep water a few times but I'm not able to get into real tight places ,these boats are Amazing!! There's been boats here called mid jets for yrs with rotary inboard engines and always thought Damn that'd be a blast but never thought of a use for one other than pure fun and Adrenaline Rush, Until NOW! THIS has been well put together and will definitely check out any others you have, Again THANKS 👍

[@MrLucidity]

Thank you; for showing us the bits of our country most of us don't get to see. I've seen a lot of beautiful spots in this wonderful country of ours, but holy s**t, you show us a side I've never even dreamed about

[@leocosta9804]

Good evening, could you give me a tip if this hull reinforcement can also be done on a jet ski, because I walk in rivers with a lot of rocks here, I'm from Brazil.

[@taevue]

6:17, music finally starts.

[@neilpederson5212]

Skat trac impellers are great, ran them in my boat! Solas work good but not tough!

[@ramcharger9146]

Where can I get the plastic Hume from is there any stores I can go to instead of ordering it online for the bottom of the boat I really want to go up some shallow rivers I got up here

[@ramcharger9146]

Where can I get the plastic Hume for the bottom of the boat

[@clydeyokoi9347]

Great vid. I like your point about the helmet - the areas you go and the speeds - it's a must.

[@BrettLWadsworth]

Love the vids! I have the big dumb kind of jet boat you don't like lol. Would love to learn more about these boats and what it really takes to keep em running and where to get parts and pieces. Keep it up!

[@williamcook6893]

Can you add the plastic bottom to a factory boat with .100 aluminum hull?

[@goatracing610]

You can add plastic to any boat

[@64jellybean]

Another great video as always - well done

[@randallgates3679]

Holy shit...... that wire wtf????

[@Moltike707]

nice build got plans for it ? so I can build one here in US

[@thomashewittv8]

mint goat, love it! some great footage in there too hahaha

[@pfmurphy525]

Really really nice, thanks for the video

[@kuzensky]

Please name the music that was here

[@billmurphy3345]

best youtube videos brother , the music , the views

[@danielmarvin5055]

Such an awesome video.. looks like a good time, but I'm glad just to watch

[@TheReefqekoHungryHungarian]

Nice video. I am building my own as well and this is very inspirational and instructive. Can you tell me what kind of bolts you used to hold down the HDPE plastic you put on the haul?

[@ranchero50]

Flat head Allen's. Countersink the plastic first to the correct depth by clamping a split collar onto a 90` countersink (similar to a drywall screw bit). Seal everything with good RTV as you do it.

[@derekeinar]

where you find a cast jet ski intake?

[@mitchpender8113]

You can weld one up

[@matwalker6336]

minijets out of ontario or ASPCNC in new zealand

[@chanman1197]

did you build your boat from scratch or is it a kit?

[@mawunyoking-khoqx7894]

HI CAN YOU RECOMMEND WHAT HEAVY DUTY PUMP YOU USED? AND WHICH CAR ENGINE? NICE VIDEO I LOVE IT!!

[@goatracing610]

its a yamaha gp 1200 jetski motor and jet unit

[@twigglykevin]

hey goat whats your opinion on the same hull design and dimensions but a kz1000 kawasaki motorcycle engine driving the pump? ive got one and would love to build a boat but im concerned because its an air cooled engine

[@goatracing610]

not enough air flow to cool an air cooled motor,just stick with a jetski motor,its simple and it works

[@adambrown952]

where did you find the cast jet pump?

[@mitchpender8113]

Adam brown get one welded up , its not that hard for a semi skilled welder

[@mikekeen9710]

awesome vid gr8 tips for the newby

[@bbggakkba]

What sort of motor is in this thing?

[@amphilex]

Thanks for fade out, good choice!

[@buckwild6552]

Where could I buy one 15’ or 16’

[@jefflebowsky3329]

Where can i buy that boat Kit?

[@samburris9068]

we are working on a kit look out for Our new Tiger Shark Mini

[@PaulMcBreen]

Good stuff Goat

[@bauz1]

really good Video! best wish from austia

[@paulcini6084]

Great vid awesome tips

[@quikgt]

Really great vid! Thanks

[@tip397]

I cant find a dealer to get me a scatrac impeller. Do you import yours?

[@torqingheads]

ebay

[@pumkinface1]

That wire across the river right at head height is no accident. Some authority should really look into to that. Someone will be seriously injured one day.

[@oosamaaaa]

You mean beheaded

[@pumkinface1]

yup

[@TWLML420]

that 1200cc yamaha motor is the way to go, 135 hp and super durable!

[@codysett1]

another thing not mentioned which might seem to be common sense is to always go upriver! And carry and backup paddle. If your shit gives out, the current will take you back to your truck

[@algorythemQ]

Very cool....

[@ChrisLawley43]

How long is this boat?

[@torqingheads]

3 metres

[@JoeyMoieYW]

who the f**k puts wire there!? otherwise great video!

[@handyandy345]

that will kill a boater one day.

[@imchris5000]

its for fishing nets

[@ReubenFellows]

no wire often crosses rivers in farmland for multiple reasons. that was propably part of a fence that crossed the river in the old days

[@kingofnyc2]

Mad Maxes of the river

[@travisdrain5637]

Wow that wire needs sorted. That's deadly.

[@ab-bc2gr]

Yes, I'm thinking a removable 2" dia. aluminum slanted pole/hoop from front to mid area and above head height may be a good idea.

[@WHITERIVERRAMBO]

great video Cheers

[@hearsayhenderson2623]

I'll be in touch. gotta have one

[@hoangtong4865]

Do you sale it's

[@Nowehi305]

Great work

[@danielmckay3458]

Better hope it works because if it doesn't you now have a hundred holes in your boat

[@maws420]

Great video, still no sound.

[@88rednut]

try mighty car mod's music, they have stated they wont remove it from anyone's video so you can run ads and actually get a few dollars for your video efforts

[@tommilka2287]

thx

[@imchris5000]

wheres a good place for hull plans? I would like to get some plate water jet cut and weld it together

[@alanhammonds5027]

This isn’t one but Liquid Violation Boats (LVB) do a great kit in various sizes for these boats

[@idabarang5639]

Mantaf

[@JDRTRM]

Yeah why is there a wire ?!? Someone mad at ya for going thru there ?

[@orchid92wateradventurecomp5]

Best

[@januszwart3876]

99 kph....... blooming fast

[@natedog2690]

that wire was fucked up. i recommended set up a hunting cam or something to see whos doing that. its attempted murder. ppl have killed dirtbikers in the woods like that

[@ForeverCuteDog]

yes please

[@zevaka12345]

Voice!? =)

[@Beachnative42]

who put the fucking wire there?

[@natedog2690]

deadly booby traps are not a prank