Jetjon, jet jon build

[@SirCarlosMusicBMI]

WOW you’ve come a long way since then. Awesome AWESOME JOB. Blessings, Carlos ✝️🙏❤️😊❗️

[@Truckboy383]

You really are a next level fabricator. It looks very meticulously planned and executed. Great job Chris!

[@FinancialPrepper]

Thank you. I lost a lot of sleep on mounting that jet pump. You only get one shot. If you mount it in at the wrong angle it will porpoise and cavitate. Have a great day dude

[@anthonysupplee858]

Is there a place I could read on the Pump angle? If I find a hull and Donor ski before a Tracker 185 jet I’m going to build one.

[@mechanicsoffreedom]

That's cool! Found you via economicninja! We were out at the lake last summer and ran into a couple kids who had put a jet drive and 460 out of a truck into a 19' ragged out old 4cylinder i/o boat. Looked like it had been sitting outside neglected for decades before these kids totally hotrodded it out. Had demo derby stacks, two aluminum racing seats, a hot pedal and racing guages in a handmade aluminum dash. Rest of the interior was either gutted or very well worn. It was the coolest thing I've seen in a long time! He said the look on peoples faces in their brand new shiny boats was priceless as he pulled away from everything else out there in their rat rod boat. What a cool setup you have there on yours!

[@ssr4656]

Nice fab work Brother!

[@FinancialPrepper]

Thanks for watching I’m glad you like it. It’s a lot of fun

[@anarchistangler]

So much better than an outboard motor.

[@thehobotographer6860]

That’s a fishing boat!!!! I thought I was cool when i got my little plastic pond prowler II with two 12v 35 lb motors (putt putt putt). hey, boy but thats a thunder dome fishing bout for sure, when you get caught fishing in the wrong part of the creek after the thunder dome thats the bout to have,

[@rustyshackelford87]

It’s the most beautiful thing I’ve ever seen

[@FinancialPrepper]

Thanks Chris I’m gonna do a video on it again one day I think I’ll take it out next week

[@danbob1650]

Creating your dreams.

[@gsftom]

“You gotta be kiddin me”

[@jdog4534]

Nice! What's top speed? How does it handle straight lines? I've got an old seadoo speedster with twin jets. It's fun as F on any kind of water, but it's got a kinda deep v hull , ...deep for its size... I'm just wondering what a small flat bottom jet boat is like. I've been in a few flat bottom v drives over the years. They handled like jet boats so an actual flat bottom jet must be insane.. do you have any other videos of this beast in action?

[@FinancialPrepper]

It slides a little bit but it doesn’t cavitate much because I counter sunk the bottom so much. It’s really fun to drive TopSpeed around 45. It was a little bit faster before I put The deck and all the gear in it it’s a little bit slower with two people maybe around 41 or 42.I guess the funnest part about it is. It gets there in like one second. You know how jet boats are

[@tradinghouseDesignCo]

Do you still have the boat Chris? How's it holding up?

[@UnconventionalMetal]

Man that looks fun. Great job, I especially like how you bent up the transom pieces. On the aluminum, did you use a spool gun or TIG?

[@FinancialPrepper]

I spool gun most of it. I use the Tig where I need to do. Aluminum is not really my thing. But it was fun learning. If you can weld metal you can weld anything.

[@eliodorojimenez5911]

Exelente !!

[@ForensicGuySC]

Great Build I have 1996 dynasty jetsport storm 120 engine XR Where you can't find parts for that engine and part getting obsolete what have heard people put in to covert some other Engine? Thank in Advance

[@FinancialPrepper]

I have no clue where to get parts from.I know this is from two years ago but I’m just now reading it LOL!

[@everythingsportsman2019]

Do you have any trouble with cavitation? The ones we built have cavitation issues. The work great on glassy waters. Any chop at all and we can barely move. Thanks!

[@FinancialPrepper]

Zero cavitation.I countersunk the bottom of the Jetski 2 inches beneath the boat. And made the bottom of the boat look just like the Jetski.It worked out really well.

[@FinancialPrepper]

Well not zero cavitation but no more than the Jetski

[@everythingsportsman2019]

Awesome! I’m picking up another boat in the morning. I’m going to put a 97 Kawasaki 750 in it. I’m excited to get after this project

[@rebeloneal4592]

Man! I have to build me a dual jet prop one..

[@FinancialPrepper]

That would be fine but I’m afraid it would be double trouble! Sorry for the late reply better a couple years late than never LOL

[@MacDaddy5]

“Title text here” lmfao

[@rob449]

I want to do this to my 17 foot tracker so bad!!!

[@ripptydevibes2581]

Did you do a second stick steer for piloting from either seat? Im now starting into my steering built, glad I saw that you used the stock bars, didnt think of that! I do want to be able to pilot it from either side, as mine will likely be stick in center. PS, im video documenting my build on my channel.

[@jenky1044]

I'm guessing one of the sticks is for the reverse bucket on the rear and the other one is for steering.

[@FinancialPrepper]

Ripptyde Vibes The second stick is forward and reverse

[@tublisthao1798]

I like your boat how much if you build one for me?

[@FinancialPrepper]

No time sorry

[@wilsonwerks8256]

What’s the second handle for? The trim?

[@jeffyoung2089]

AWESOME!

[@FinancialPrepper]

jeff young thanks jeff it was a really fun build

[@five20too84]

If you don't mind my asking, how did you figure out which way you needed to shim the pump to get the proper angle? I've always wondered if it needed to be done and you don't see many people ever talk about it. Thanks

[@FinancialPrepper]

Five20too I actually lost some sleep over the jet angle. because the JetSki’s kind of a bubble shape it rides in the water different then a boat. I didn’t want any cavitation either or unnecessary drag so I position the boat where it looked like it was on the water and leveled the jet pump to that.

[@five20too84]

Thanks for your explanation! I'm going to do the same thing then. Losing sleep seems like a byproduct of this build for me. One step closer though. Thanks again!

[@ripptydevibes2581]

I "nearly" lost sleep over my pump angle. What I did was I found that a 7/8" wooden dowel needed little sanding and it fit SNUG right into my pump bearing. With a 4' dowel sticking out the back, it made it SUPER easy to just plumb the pump by eye, after spending HOURS using measuring techniques prior to realizing the dowel shaft method!

[@jimjones8300]

Nice build . How fast will it run and how is the ride at top speed ? I have a 1955 Feathercraft Vegabond im getting it ready for this kinda build. I'm either going with twin 140 hp jetski engine's or a 1500 or so motorcycle eng. Any comments or concerns positive or negative . Love the way your build turned out and would appreciate any advice.

[@FinancialPrepper]

Jim Jones Hi Jim, the ski would gps 53 mph. After I put it in the boat, it went down to 48mph. The Most impressive thing about the boat is the torque of the Honda four stroke. Going from 0 to 48 in just a few seconds is pretty fun.Keep it light. I don’t know the weight of the boat you are using but the lighter the better. It rides great at TopSpeed. slides a little bit going around sharp corners as you can probably see in the other videos on my channel. I’m not sure how you would hook a motorcycle motor up to a jet pump, but I am sure it can be done. Don’t just think about it, do it! it was the funnest build I’ve ever done. Yeahhh!!!

[@edredfish]

I just sold a 1957 feathercraft vagabond it was rated for max 100 hp and weighed 450 ld empty

[@edredfish]

Question, what is the distance from transom to the front of the motor? I am about to start a build but don't want to loose my live well.

[@FinancialPrepper]

xboxedredfish Answer, 4’ but every ski is different

[@edredfish]

@@FinancialPrepper thank you for your time. Also. Could you tell me what type of motor cc/hp.

[@FinancialPrepper]

xboxedredfish 1200cc four stroke Honda non turbo

[@tannernoble7442]

Would you consider building one for someone else? For the right price

[@FinancialPrepper]

No. As much as I would like to. I Just don’t have time.

[@buckwild6552]

Any plans on doing this available?

[@FinancialPrepper]

Buckwild 65 No plans just go for it!!!

[@johnreddick413]

Did you glue or both the fiber glass section in?

[@FinancialPrepper]

Yes I glued and bolted the fiberglass

[@johnreddick413]

Chris Taylor nice build man love the paint btw

[@jonathancarnahan5180]

This is awesome...what hp

[@FinancialPrepper]

Jonathan Carnahan 165 hp

[@georgedorsey3089]

Total estimated cost of the build?

[@robfite6909]

Man that’s an awesome build. Would you mind emailing me, I’ve got some questions for you? Thanks

[@FinancialPrepper]

Rob Fite sure what’s your email

[@justinholmes5328]

Seeing that Aquatrax chopped up makes me cringe. Arguably one of the best “jet skis” .. and they are no longer made. Cool boat project though.

[@FinancialPrepper]

Thank you it’s really reliable. I’m having a little trouble with it idling a little too fast after I ride for a while

[@user-dz2jv4in5z]

"Title text here."

[@FinancialPrepper]

I know I half assed the hell out of the video I’m gonna do better!

[@tompeace2621]

That thing is bad I want one

[@Festyxr4]

This is the most half arse vid I’ve ever seen but mad boat doe 🥴

[@FinancialPrepper]

You know I regret ever half ass thing I’ve ever done and I really did do a half assed job on that I’m gonna do it again right one day

[@joemoore1433]

Hello, can I ask what adhesive you used? TIA