de-salting v8 jetski after it sank (Ls v8 jetski)

  Рет қаралды 16,040

JetSki Brothers

JetSki Brothers

Күн бұрын

v8 jetski sank, then we brought it back to shore, now is a perfect oppertunity to try out de-salt from better boat.
big thanks to Holley helping out on this build
Holley website www.holley.com/
#jetskibrothers #v8jetski #v8pwc

Пікірлер: 30
@spcneary
@spcneary 3 жыл бұрын
I would rather see these daily updates than 1 30 minute vid. I like this format allot.
@boardrfolif3
@boardrfolif3 3 жыл бұрын
I feel like most of us watchers feel this way. Not sure if still applies, but YT incentives creators to make videos at least 10 min long. They give higher ad revenue if the creator does. Unfortunately, now most videos are a high school essay with so much filler to try and reach the 10 min mark. Personally, it's making me watch less and less YT.
@tropmonky
@tropmonky 3 жыл бұрын
That desalter probably just CLR. Keep up the good work!
@matthewnickolas7509
@matthewnickolas7509 3 жыл бұрын
Keep it up man I'm just hopeing the best for u bro.but I will say u have an amazing attitude with everything thing.so good job an I cant wait for more.
@mickotoole4795
@mickotoole4795 3 жыл бұрын
Hay hay loads of drama last night .. commenters . 🤣🤣Alot of work ahead of you get sum salt away in there 👍👍🇨🇮🇺🇸🇨🇮
@stevejohnson8703
@stevejohnson8703 3 жыл бұрын
Still no PayPal. I'm not complaining, you're saving me money.
@DieselRamcharger
@DieselRamcharger 3 жыл бұрын
I like the effort. But in some regards you are in over your head with what tooling you have available. If you need some custom machine work done, you should give me a shout.
@keving1774
@keving1774 3 жыл бұрын
How are you going to clean the inside of the engine?
@MikeZ32TT
@MikeZ32TT 3 жыл бұрын
I use salt away after every salt water ride. This sinking just adds more drama. Thanks JSB
@pathofcheddar3321
@pathofcheddar3321 3 жыл бұрын
Hey man you talked about the gear ratio. But never explained the transmission or what not to achieve that reduction, is it custom?
@roudyroy1
@roudyroy1 3 жыл бұрын
If that thing still has not been started since it sank i think you are going to have some problems
@kimkeam2094
@kimkeam2094 3 жыл бұрын
Burning the midnight hours to get it back in running order ! Would it be worth it to de salt after each use or is just having a coat of lithium grease all you need? Perhaps you might consider having a short video just on that subject. There’s a lot of us who just leave it and don’t have the best way to look after our JetSki from lack of knowledge.
@costasgeorgiou5015
@costasgeorgiou5015 3 жыл бұрын
Dayum! I caught a video before the first ten mins!
@charlesirby9222
@charlesirby9222 3 жыл бұрын
BUT...?...What about the area of the block that is blocked by the mounting plates front and rear? What about the underside around the oil pan and such?
@mjethier
@mjethier 3 жыл бұрын
what did you do to the internals? I suggested filling with diesel and pumping out a few days ago.
@williamschulz6792
@williamschulz6792 3 жыл бұрын
What state is WN?
@cameraman1234567890
@cameraman1234567890 3 жыл бұрын
Sucks when your project breaks on you. Happened on my 96' spx with my 717 motor, had to get another motor because something broke
@Thewatson77
@Thewatson77 3 жыл бұрын
Man that hurts to watch 😖 Trying to let things dry out but having to intentionally soak it down with the de-salt stuff
@terrywilson581
@terrywilson581 3 жыл бұрын
I think the only thing you're going to have a problem with maybe that starter cuz if you didn't patch that hole up that drain tube you may have got salt in that motor
@zeke2566
@zeke2566 3 жыл бұрын
The Japanese call your project-smoking junk-sorry,try some back engineering rubber motor mounts,etc,and donate the solid rpm killing exh to the re-cycle bin...
@ericcartman9634
@ericcartman9634 3 жыл бұрын
Didn't know about desalter just use car soap ,Hose ,leaf blower takes 15 mins for a superjet
@UncleBildo
@UncleBildo 3 жыл бұрын
Sitting with baited breath, or breath that smells like bait or something..... interesting project! Not sure 'zactly where you guys are over there, but gotta be a usable FRESH water location to do some testing, just in case? Then again, not that many big pieces come to mind that you could really open that beast up on that wouldn't just be crammed with idiots. Could rip for 200 miles plus on this side of the Cascades!
@peavyrocks
@peavyrocks 3 жыл бұрын
first
@mickotoole4795
@mickotoole4795 3 жыл бұрын
Good man a new I'm first Guy 😉🇨🇮🇺🇸👍👍👍
@mrMankx
@mrMankx 3 жыл бұрын
The "do not recomend channel" buttom how does it work?The "do not recomend channel" buttom how does it work?
@joeschneider8025
@joeschneider8025 3 жыл бұрын
What's the point who wants to get stranded in the middle of a lake my factory jet ski run 72 Sea-Doo supercharged
@Jacobskibros
@Jacobskibros 3 жыл бұрын
You have a supercharger on a 72? I have a 68 first year seadoo with the air cooled engine. Do you think a supercharger would fit? I cant keep up with my friend's 587 right now.
@MrWszola
@MrWszola 3 жыл бұрын
How about the pride of riding something you built instead of bought? Seems pretty easy to assume they enjoy modifying jet skis on this channel 😂
@joeschneider8025
@joeschneider8025 3 жыл бұрын
@@MrWszola I get it there's nothing wrong with that but I've been stranded on the lake a few times no fun I've already had them days I was just trying to help you out
@jasonskibrothers2192
@jasonskibrothers2192 3 жыл бұрын
I feel like some of subs are feeling salty about your technique
Good and bad news Ls v8 jetski
3:52
JetSki Brothers
Рет қаралды 26 М.
v8 turbo ski first ride 2024
12:20
JetSki Brothers
Рет қаралды 15 М.
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН
Made a tiny boat from an old jetski - full video -
12:07
JetSki Brothers
Рет қаралды 142 М.
Insane turbo barrel makes 30+ psi boost on FIREWOOD
10:03
Camp Dogs
Рет қаралды 2,1 МЛН
how have we not had one of these yet?
16:08
JetSki Brothers
Рет қаралды 5 М.
Can we start this old ship up after 5 years?
20:43
DIYLIFE
Рет қаралды 681 М.
Propeller Killer? High Efficiency Paddle Vs. Propeller
16:28
rctestflight
Рет қаралды 1,2 МЛН
I built a FLAP ENGINE (New Rotary Design)
18:58
Integza
Рет қаралды 1,8 МЛН
We saved $100k! Making an old boat new again!
11:58
True North Adventures
Рет қаралды 30 М.