Jewelry Making Pliers Explained - Better Beader Episode 46 by PotomacBeads

[@rebeccafionacornel6558]

thank you for these videos because i am learning a lot........

[@ambreenziaiqbal7561]

Thank u so much u share about pliers in detailed

[@Potomacbeadco]

You're always welcome :)

[@sue7777]

Great overview of a real variety of pliers-thanks, Allie.

[@IreneKiew]

Thank you for the useful information in this video! Would it be possible for you to add information on your website about the length of each pliers you carry (because some are smaller, 4.5 inches long, while the standard seems to be 5 inches) and also the width of the tip? That's so important when buying online, because we don't get to hold the pliers in our hand to try them out before buying, and sometimes they don't fit so good in the hand if they're a bit smaller. Also, the width of the tips would be good to know because some chain nose, round nose, and flat nose pliers have narrower tips than others. I'm looking for a set with very narrow tips, to get into the nooks and crannies of my projects more easily. I'd also like to know the material each set of pliers are made of because I have had plier jaws which rusted or discolored and I discovered they were made of carbon steel instead of stainless steel! All this additional information would really help shoppers like me feel more confident when purchasing a pair of pliers online from your company. Thanks so much!

[@loycehake1170]

Great info, Allie. Thanks

[@maxinelutes1464]

Thank you for this information !

[@loueencooke9006]

Learnt so much thank you

[@KP-nx8lo]

Some knives sharpening companies will sharpen tools like pliers and cutters for you if you ask, so always check local tooling shops to see if they do that.

[@cleolathompson3387]

Great job explaining the different tools and their usage. I went to your sight to order and some are out. When is the best time to order? My pliers are shot. I need the pliers that you use. I want all three. Please help so that I can place my order. Thank you. Your video is so informative. Great job!

[@Potomacbeadco]

Glad it helps. Happy beading :)

[@emadla12]

Hi this was a wonderful tutorial but I have one question can you please do a video tutorial on how to take care of your pliers

[@Potomacbeadco]

Hi Elaheh, that's a great question. I highly recommend you always use stainless steel pliers, no grooves, just smooth surfaces so they don't scratch your work. If you store them in a box, bag or pouch, they will stay clean and you will always know where they are. Don't oil them because that can leave residue that winds up on your hands, beads and thread, making your project look dirty before it's even finished. If you have a problem with pliers being difficult to use, just buy a new pair. While you don't need to spend a fortune on tools, quality definitely feels easier to work with and will last for years to come.

[@gracefuldawn2690]

Are your round-nose pliers smooth? The ones I have are grooved - teeny tiny little ones, to help hold the wire. Also, you didn't mention bead reamers, which are great for opening and widening holes in all kinds of beads.

[@Potomacbeadco]

No grooves, they mark your work. Always smooth pliers for beading and wire working. Bead reamers are handy, but they didn't get a mention because they're not pliers. 😜

[@francinereider7427]

Hi Allie. What size crimp pliers would I use on a 2x2 crimp tube. And what size crimp cover for the 2x2 tube.

[@Potomacbeadco]

If you want to use crimping pliers, the middle size is suitable for most projects. The size of the crimp dictates the size of the crimp cover. 2x2 will need crimp covers that are slightly larger.

[@lisapfeiffer4053]

Jump rings are my nemesis. I bought a pair of jump ring pliers in the hope that they would help me keep those danged rings closed. However, I can't figure out how they work. Do you know? They look like square nosed pliers with ruts in them.

[@Potomacbeadco]

Hi Lisa, I'm not sure exactly which pliers you mean, but jump rings come in many shapes, sizes and gauges. You need to buy the right ones for your needs. If you want to use them in a bracelet or necklace, always use 20ga or stainless steel. This will ensure that under normal usage, your jump rings will stay closed. If you're trying to use jump rings with thread, the thread will always find its way through the jump ring no matter what. In this case, always use a wire guardian for your thread, and then you can attach your jump ring to the wire guardian. The thread can't get through that combination. I avoid using split rings and split ring opening tools, because they never go back into shape. They're like tiny keyrings so unless you want to use them for some specific situation, wire guardians are much better.

[@darlaboyle1074]

Is there any way to sharpen your cutters? I have 5 pair, maybe more, that won't even cut my thread. Great idea labelling them for when I get into wire work.

[@Potomacbeadco]

Which thread are you trying to cut with wire cutters? If you mean Wildfire, Fireline, etc, nylon threads need a Thread Zap because they're thermally bonded braids and are resistant to cutting. If you mean nylon coated beading wire, you should be able to cut that with your cutters. If you have five pairs and none of them cut beading wire, then you might have damaged them by cutting hard wire like memory wire. Check the blade edges, are the smooth or do they have notches in them from all the wire cuts?

[@darlaboyle1074]

@@Potomacbeadco I use Wildfire mostly. Sometimes nymo and on occasion Fireline. I used the cutters because regular scissors didn't give a clean cut and I didn't have a thread burner. I did cut wire, not memory wire, but .015" diameter. Yes,it does look like there are notches in some of the clippers.

[@keishadavidson6969]

What is a bird beak pliers?what is it used for?

[@serenitycraft8557]

I have seen some pliers that you can run the wire through and they will turn the loop and cut off the extra. What are these type called and are they worth having?

[@kgarrett961]

Serenity Craft Hi Serenity. They are called 1-step looper. Mine are made by The BeadSmith.

[@elmelosaurio5600]

Thanks i bought a set in ebay