No video

Getting Started with Hammers | Jewelry 101

  Рет қаралды 62,106

Jewel School

Jewel School

Күн бұрын

Пікірлер: 69
@denisesmothers5727
@denisesmothers5727 7 ай бұрын
Never knew about using the rawhide Hammer to smooth out the metal first before using my Chase hammer and then my texturizing Hammer I am an elderly lady with bad arthritis and this has helped me tremendously thank you so much
@shantiaum5774
@shantiaum5774 5 жыл бұрын
I like the videos a lot but I agree with the previous person, the camera work needs so much improvement. How can we see anything on these tiny pieces if there’s no zoom? I couldn’t see any of the textures.
@lidiamcculley8933
@lidiamcculley8933 5 жыл бұрын
Hi dear, thanks much for your great teaching and sharing your knowledge, it was something I wanted to learn. I wonder if the person filming the video could make a closer look when you are showing the example material done, it's very hard to appreciate far away. Thanks much again! Have a great week! Greetings from Minnesota!
@sharricarpenter1405
@sharricarpenter1405 2 жыл бұрын
Hi I appreciate your videos I'm a beginner and your videos are very helpful thank you Sharri
@AsteriETERNAL
@AsteriETERNAL 5 жыл бұрын
Pls work on improving your camera work. We need closer zooms, and that last bit of copper where you hammered multiple textures needed to be held up so that we could actually see the effects. Thanks, I subscribed! 👍
@daviamaldet6521
@daviamaldet6521 3 жыл бұрын
Thanks for the video. I'm new at this and it was interesting 🙂.
@sfkozak
@sfkozak 4 жыл бұрын
Thanks so much! I had a second hand set of ear rings the wire was a 24 gauge wire and I never wore them because the wire was so flexible, I tapped them with the hammer and they are staying to there shape so nicely now :)
@gisella1350
@gisella1350 Жыл бұрын
Greatly appreciate your helpful video. I am a newbie, and I am soaking it all up, thank you.
@wen-wenwang6920
@wen-wenwang6920 9 ай бұрын
I’d love to know how to put flattened curves into a drop earring. Perhaps a rounded hammer and a curved block? Love your tutorials, Susan!
@AllThingsSoul
@AllThingsSoul 3 жыл бұрын
I agree, the camera work needs improvement. Once you are done hammering, hold it up to the camera so we can how it looks. Remember, it takes the camera approximately 8-10 seconds to re-focus when you hold something up. So give it 10 seconds to focus, then hold it there another 10 seconds, so we can see it. The camera lens does not focus as fast as our eyes. It takes time. Your are a great teacher with a wide variety of interesting topics. Thank you!
@suzannedarveau5658
@suzannedarveau5658 9 ай бұрын
Helpful thanks!
@mymathimagination2629
@mymathimagination2629 5 жыл бұрын
I really love and appreciate your lessons and tips! I’ve learned quite a bit from you on your KZbin videos and Jewel School. I’d love for you to do a demo on how to make beaded tassels. I remember you did a quick one with fireline and a lighter on Jewel School. I’d love to see a full demo on that. Thanks!!!😉♥️
@pmhres
@pmhres 3 жыл бұрын
Great instructional which I really need. I ordered a rawhide mallet just now from Amazon. I already have the other mallets but I just now learned how to use them 😅😂 BTW - you have such beautiful hands 😀👍❤️
@leechristian8671
@leechristian8671 4 жыл бұрын
Even enlarging it, I didn't get to see the textures. Especially at the end. Thanks, I'm subscribing.
@kristinperdue6392
@kristinperdue6392 3 жыл бұрын
I agree. It would be really helpful if they could zoom way in when showing the different textures.
@lornapostle1659
@lornapostle1659 4 жыл бұрын
Well just found one them bench block thank u for sharing again love watching your videos it helps
@MsLeosmom
@MsLeosmom 3 жыл бұрын
i think what you're doing with the chasing hammer is forging. dapping is usually done with a dapping block and dapping punches and involves making a domed shape. also, its actually called a ring mandrel not a ring stick. no big deal but just thought i'd mention it!
@marthafontaine9797
@marthafontaine9797 2 жыл бұрын
Great tutorial, thank you for sharing.
@StitchesbySharonH
@StitchesbySharonH 5 жыл бұрын
Very cool!! Thank you for sharing - I learned a lot!
@lynneholden6216
@lynneholden6216 2 жыл бұрын
Thank You!
@elizabethharvey2215
@elizabethharvey2215 3 жыл бұрын
Hi I've just watched your video on Getting Started with Hammers and thank you it was very informative and has provided me with much needed advice . I would have liked to have seen a more close up picture of the items you worked on, I saw how you worked on it but could not really see the final result... I will continue to watch your videos though. thanks
@danishproducts9010
@danishproducts9010 4 жыл бұрын
great job
@magdalenatriasricci
@magdalenatriasricci 5 жыл бұрын
Hola Jewel School son hermosas las clases lástima que algunas explicaciones, sin subtítulos en español se me complica, podría Teacher poner subtitulos, thanks , disculpe la molestia.
@brittanybowmaster6503
@brittanybowmaster6503 3 жыл бұрын
So if we want to add texture to a ring, should we create the piece a size smaller to start?
@kristinperdue6392
@kristinperdue6392 3 жыл бұрын
Yes, definitely start with a size smaller if you plan on hammering texture. 😊
@joelimo449
@joelimo449 Жыл бұрын
Very educational , thank you .....The Rawhide Mallet , is it 1 inch or 2 inch Face ??
@JewelSchool
@JewelSchool Жыл бұрын
Face diameter is 1-1/4 inches with a head weight of 4 ounces
@evelynflores3137
@evelynflores3137 2 жыл бұрын
Good information thank you but 1 more question hammer number 1;2;3;4 which am Beginner so I don’t know
@JewelSchool
@JewelSchool 2 жыл бұрын
Specifically, There is a Raw Hide Mallet 1 1/2" x 3" Length Head Size 9 1/2" Long, A domed chasing hammer 28mm convex hammer on one side and a 14mm ball head on the other, and a textured hammer with checkerboard on one side and parallel striping on the other, 10-1/2 inches. The textures are 1-1/8 inch. Hope this helps!
@Marshman95
@Marshman95 2 жыл бұрын
Hi there. I love your videos. HELP!!! Could you please show or tell me the technique on how to keep your hooped earrings in a circle shape when hammering? I want to create a flatter hammered edge on the bottom and only slight hammer on the sides and top. When ever I start hammering the shape doesn't stay circle and because the bottom is flat hammered, I can put it back on the mandrel and reshape.
@johnniceking413
@johnniceking413 Жыл бұрын
So if adding texture I should make it about 1 size smaller due to the expansion?
@JewelSchool
@JewelSchool Жыл бұрын
Yes, if your texturizing
@lisalee2702
@lisalee2702 3 жыл бұрын
Close ups of the textures would have been appreciated (or perhaps insert a few photos). It's like watching a movie, and right before the final scene, the credits start rolling.
@amandadoverspike2949
@amandadoverspike2949 3 жыл бұрын
My main question is what gauge wire. Is there a size range you recommend, I want to make gold filled charms/pendants for necklaces.
@annitagalvan9049
@annitagalvan9049 Жыл бұрын
Hi, first time at your channel. Very interesting tutorial. I have 2 queries. When you mention "to strengthen the metal", do you mean, it won't easily bend? As well, can we hammer stainless steel wire? Thank you for your help.
@JewelSchool
@JewelSchool Жыл бұрын
Yes, when you lightly hammer, it makes the wire a bit harder so it won't bend as much. You can hammer stainless steel wire, yes, but normally doesn't need it as it is already super hard. You can't use normal flush cutter with it. Your tools need to also be stainless steel.
@annitagalvan9049
@annitagalvan9049 Жыл бұрын
Thank you so much for your response, it's to the point and very helpful. I'm a polymer clay artist and I want tto use stainless steel wire (18 gauge) to make my own pin backs for brooches, as I find stainless steel wire to be a hard metal to withstand the presses when used as a pin back. To hammer it, is just to manipulate the wire to give it a flat base to be hidden in the polymer clay. Thank you again for your time and help.
@georginaloginov3960
@georginaloginov3960 Жыл бұрын
Good afternoon. What type of wire are you using in the video? Is it bronze? How do you get it to be so polished? Thx
@JewelSchool
@JewelSchool Жыл бұрын
This is .925 sterling silver and bare copper wire. She polishes with steel wool and a brass brush.
@oniapleasants4787
@oniapleasants4787 5 жыл бұрын
Thank You!! I can see everything now
@jlucas1004
@jlucas1004 4 жыл бұрын
I have tried flattening wire and it does not flatten. I dont know what I am doing wrong. Does the wire have to be a particular softness or hardness or a particular gauge range? Can only a chasing hammer be used for this? Maybe I missed all that info inthe video and if so I apologize. One more question. Can a rubber or nylon hammer be used in place of rawhide?
@susane945
@susane945 3 жыл бұрын
Good but you need to zoom in otherwise we can't see the textures on the rings and bangles!! 😉
@mjremy2605
@mjremy2605 2 жыл бұрын
Wonderful tutorial, thank you! Feedback: Show closeups with camera, cannot see any detail. Please turn of all music. Noise overload on ears.
@JewelSchool
@JewelSchool 2 жыл бұрын
Hey MJ! Check out some of our newest videos. We think we have improved the ability for you to see closer in!
@mahk4374
@mahk4374 2 жыл бұрын
Can you prevent the colour peeling up when your hammer plated wire?
@JewelSchool
@JewelSchool 2 жыл бұрын
You just have to be very careful to lightly hammer it, or yes, the color can come off.
@OneySantibanez
@OneySantibanez 4 жыл бұрын
I love your videos. Please where can I get the Rawhide Mallet you are using?
@JewelSchool
@JewelSchool 4 жыл бұрын
Glad you asked! You can find the mallet right here: www.jtv.com/search/?Ntt=rawhide+mallet&type=products&N=4243964577&Ntk=All
@annaa7069
@annaa7069 4 жыл бұрын
Should I texturize my metal before I cut it out? Or after I cut it out?
@JewelSchool
@JewelSchool 4 жыл бұрын
Hey Anna! After you cut it out.
@MissMurmelLynn
@MissMurmelLynn 2 жыл бұрын
Hi there been really loving your videos so very helpful!!! I have a question! I’m just starting out crafting with copper wire and I found that it’s changing the color to silver when I hammer it ,I was wondering if you could help me with this.. is this because I hammering too hard, is it the material, or maybe the block ? Thank you!
@JewelSchool
@JewelSchool 2 жыл бұрын
Hey Stacy! It could be that you might try switching to a rawhide hammer. It's less likely to mar or discolor your wire. Believe it or not, hammering is hard! Just keep practicing a light touch and you'll get there! P.S. you can always oxidize your finish piece with liver of sulphur gel in water and it will help hide those spots should you continue to have them.
@rebeccao1661
@rebeccao1661 3 жыл бұрын
Hi Susan! Do you know what kind of hammer I should use for more of a serrated look/texture?
@JewelSchool
@JewelSchool 3 жыл бұрын
Hi there! I would use a texturizing hammer. This “Whammer” from JTV has a pick head attachment that would be great for a serrated look, I think! www.jtv.com/product/whammer-deluxe-5-in-1-tool-with-interchangeable-heads/JMBKIT562?mcid=XSOjsyt
@adriejnaesingleton77
@adriejnaesingleton77 2 жыл бұрын
Awesome video. I watched your no soldier bangle videos and attempted to make them. Question, when I used my chasing hammer on my 12 gauge tarnish resistant copper wire to make the paddles for hole punching, it totally messed up that part of the wire. The wire was gold and this process took the gold plating off. Am I doing something wrong?
@JewelSchool
@JewelSchool 2 жыл бұрын
Hi! Parawire has a tarnish resistant coating and if you over hammer it the coating will come off. If is really only meant for very light hammering and no texturing. If you want to make a bangle that needs to be hammered a lot try bare copper or sterling silver wire.
@adriejnaesingleton77
@adriejnaesingleton77 2 жыл бұрын
@@JewelSchool ok thank you so much!
@katelynmoll3569
@katelynmoll3569 5 жыл бұрын
What is the difference between a rawhide and a nylon hammer?
@JewelSchool
@JewelSchool 5 жыл бұрын
Hey Katelyn! They are different materials that perform a similar function. Shaping wire without marring it. I prefer rawhide, but nylon can be good too.
@catherinemartina6469
@catherinemartina6469 Жыл бұрын
How much do they weight
@JewelSchool
@JewelSchool Жыл бұрын
a chasing hammer is about 6 ounces
@lotus9922
@lotus9922 3 жыл бұрын
Thank you for all your videos! Very nice work and very thorough! Greatly appreciate you sharing!😊
@maev_8927
@maev_8927 3 жыл бұрын
i wish i could do this but my family would get too mad at me for making noise
@Noelani55555
@Noelani55555 4 жыл бұрын
what size rawhide mallet are you using? 1, 2, or 3?
@JewelSchool
@JewelSchool 4 жыл бұрын
This is the rawhide mallet we use at Jewel School: www.jtv.com/search/?Ntt=rawhide+mallet&type=products&N=4243964577&Ntk=All
@Ladycdb7
@Ladycdb7 4 жыл бұрын
Where can you find your first mallets?
@JewelSchool
@JewelSchool 4 жыл бұрын
JTV offers a great mallet, right here: www.jtv.com/product/deluxe-american-made-rawhide-mallet-size-2-face-diameter-of-1-5-inches/JST485?mcid=XSOjsyt
@christinadelrio9011
@christinadelrio9011 5 жыл бұрын
😗😗
How to Make Your Own Headpins | Jewelry 101
6:16
Jewel School
Рет қаралды 115 М.
How to Make Your Own Ear Wires | Jewelry 101
18:32
Jewel School
Рет қаралды 110 М.
Blue Food VS Red Food Emoji Mukbang
00:33
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 13 МЛН
黑天使遇到什么了?#short #angel #clown
00:34
Super Beauty team
Рет қаралды 47 МЛН
🩷🩵VS👿
00:38
ISSEI / いっせい
Рет қаралды 26 МЛН
The Basics of Wire Hardness | Jewelry 101
21:32
Jewel School
Рет қаралды 56 М.
How to Hand Knot | Jewelry 101
13:54
Jewel School
Рет қаралды 101 М.
Pro Tips: Making Jewelry with Chain | Jewelry 101
16:45
Jewel School
Рет қаралды 99 М.
How to Use Metal Shears with Jewelry | Jewelry 101
16:27
Jewel School
Рет қаралды 65 М.
How To Make a Silver Ring, Textured, Hammered (tutorial)
10:26
Konrad Jewellery
Рет қаралды 35 М.
How To Use Headpins & Eyepins
7:59
Jacobs Trading Ye Olde Rock Shop
Рет қаралды 96 М.
Hammered Patina Copper Earrings!!!  Eps 370
28:20
Matt's Crazy Art
Рет қаралды 11 М.
How to make a Hammered Sterling Silver Ring
11:19
DynamiS Jewelry
Рет қаралды 57 М.
Jewelry making tools | which hammers you need?? | silversmithing
9:04
Blue Food VS Red Food Emoji Mukbang
00:33
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 13 МЛН