Making Enma, Zoro's Katana from One Piece

  Рет қаралды 1,333,234

Jesse Hu

Jesse Hu

Күн бұрын

My most ambitious project to date, it was a wild ride for sure.
If you're a One Piece fan, let me know in the comments if I did your blade justice :D
Check out the sword listing here: www.jhublades.com/available-w...
Check out my links below:
Website: www.jhublades.com/
My Instagram: @jhublades
Shop Equipment I Recommend:
Decent Beginner Propane Forge: amzn.to/470KfPg
77lb Peddinghaus Anvil: amzn.to/3tLCWN1
Personalizer Plus Etching Machine: amzn.to/406i7rP
Granite Grade A Surface Plate: amzn.to/3q3pSBi
220 Grit Rhynowet Sandpaper: amzn.to/3QhmT2y
400 Grit Rhynowet Sandpaper: amzn.to/45L6LdK
600 Grit Rhynowet Sandpaper: amzn.to/46IHQJm
1500 Grit Rhynowet Sandpaper: amzn.to/3S7zfeM
1500 Grit Rhynowet Sandpaper: amzn.to/46JGSfN
400 Grit Atoma Diamond Stone: amzn.to/46Zh1B7
800 Grit Chosera Waterstone: amzn.to/4987UPv
3000 Grit Chosera Waterstone: amzn.to/44ua35v
Super Thin Starbond Super Glue: amzn.to/3pUf4FA
Super Glue Accelerator: amzn.to/3q1Guct
West System 24hr Epoxy: amzn.to/44UcKx5
Fluid Film for Steel Protection: amzn.to/43xTdkU
Birchwood Casey PermaBlue: amzn.to/3O2RK09
3M Ear Protection: amzn.to/3q4W2w0
3M Respirator: amzn.to/44YxrHY
3M P100 Particulate Filters: amzn.to/3OB6WU1
Axe Wax: axewax.us/?aff=62
My Camera Equipment:
Camera: Lumix S5ii (amzn.to/4b1167r)
Main Lens: Panasonic Lumix S 24-105mm f/4 Macro O.I.S. Lens
24-105mm: amzn.to/3U7CGTz
50mm: amzn.to/47FW1i4
20-60mm: amzn.to/3U7UhuW
Camera Microphone: Rode Wireless (amzn.to/4bhx2on)
Voiceover Microphone: Shure Sm7B (amzn.to/3tYFsQA)
My Shop Equipment:
Forging Press: 25 Ton Press from Coal Iron Works
Forge: 2-Burner Habanero from Chile Forge
Grinder: KMG-TX from Beaumont Metalworks
Anvil: 365lb Sichelschmidt und Schlasse
Heat Treating Oven: Paragon KM36T
Music:
Epidemic Sound
CHAPTERS:
---------------------------------------------------------
0:00 - Intro
0:14 - Forging the Blade
7:35 - Rough Grinding and Normalizing
9:04 - Claying the Spine
11:02 - Quenching the Blade and Final Grinding
13:27 - A Series of Unfortunate Events
18:20 - The Turning Point
19:44 - Field Trip
21:02 - Making the Habaki
27:22 - Making the Tsuba (Guard)
29:40 - Making the Tsuka (Handle)
32:49 - Making the Seppa (Spacer)
36:03 - Polishing the Blade
37:30 - More Handle Work
39:22 - Etching the Hamon
40:37 - Finalizing the Fittings
43:19 - Wrapping the Handle
44:21 - Final Reveal
45:25 - Sharpening and Testing

Пікірлер: 1 200
@jhublades
@jhublades 10 ай бұрын
Thanks for watching guys! Here’s some common questions (and answers) and some shameless self promotion: Check out the sword here: www.jhublades.com/available-work/p/enma Check out my Instagram @jhublades as well for behind the scenes content Questions you may have: 1. Why no saya? - I did not make a saya because I started the project on July 24th, and I needed this video to line up with either episode 1071 or 1072 of the anime. I blew a bunch of time on the restarts and just didn’t have any left for a nice saya. 2. Why no butt cap? - I wanted every aspect of this sword to be as good as I can make it. I had some thin brass sheet and very little knowledge of how these were actually made. If I put one on, it would be lackluster and wouldn’t have matched the level of polish on every other part. 3. Why no depth on the guard? - Enma has some grooves on its guard in the anime. The only way I could think of to get them into the guard involved a sandwich construction, a mill, or days of hand carving. None of those options sounded that great to me so I left it as is. I actually tried carving it out with the dremel but it looked like dogshit😅 4. Do I think this blade is actually worthy of being called a katana? - Both yes and no. There’s so much precedence for the sword that there’s no way I can make a katana that’s actually up to par with the masters of Japan. I have accepted that, and am trying to treat everything like it’s a study, a learning process. Maybe someday I can make a blade that can stand next to those of the masters that came before me.
@Robber7
@Robber7 10 ай бұрын
I would definitely watch "extended" videos! Love these. Keep it up!
@bramweinreder2346
@bramweinreder2346 10 ай бұрын
Humility and realism are the true signs of a craftsman :)
@stephensu4371
@stephensu4371 10 ай бұрын
ha, i never expecting to see you having a channel, nice one, now i follow you on youtube
@anthonyfortier8765
@anthonyfortier8765 9 ай бұрын
I would just like to say, the precision of your work makes you a craftsman. There's no need to say you're not a woodworker. Instant subscription, and I'm excited to see more.
@TBAKATrueBrownii
@TBAKATrueBrownii 8 ай бұрын
Great 👍🏽 craftsmanship and smithing went into this…Katana! Your passion, blood 🩸 sweat and tears, as well as spirit is entrapped within this sword! The ōdachi or nodachi, hopefully 🤞 will be next? Bushidō is the…Way!
@tjmccall5034
@tjmccall5034 10 ай бұрын
Your a legend for this. Oden and Zoro would be proud
@jhublades
@jhublades 10 ай бұрын
I would hope so XD only thing is it doesn’t suck out your life force when holding it
@ummuhani716
@ummuhani716 9 ай бұрын
Hamon energy
@aquilschutte
@aquilschutte 9 ай бұрын
Cringe ah comment
@texasghostrider9644
@texasghostrider9644 8 ай бұрын
No.
@T-65PowerArmor
@T-65PowerArmor 8 ай бұрын
​@@jhublades now anyone can feel like zoro.
@lordhughmungus
@lordhughmungus 8 ай бұрын
You think a dangerous sword is cursed? No! That's a sign of great quality! When the weak fear a sword and call it cursed, that is a badge of honor!
@TheGt5ive
@TheGt5ive 8 ай бұрын
I mean do you watch One Piece? Enma is definitely Cursed
@lordhughmungus
@lordhughmungus 8 ай бұрын
@@TheGt5ive Do you? Those are the words of Shimotsuki Kozaburo, the man who crafted Enma and Wado Ichimonji. If he says there's no such thing as a cursed blade I'm gonna take his word for it.
@yashchauhan1556
@yashchauhan1556 8 ай бұрын
@@TheGt5ive You just got lawyered mate. Hold this L
@dinowaffle9802
@dinowaffle9802 7 ай бұрын
bro thats the words of the swordsmith that made Enma and Wado Ichimonji. the one kid zoro was talking to in the recent flashbacks in Wano.@@TheGt5ive
@DrPlagueReborn
@DrPlagueReborn 6 ай бұрын
​@@lordhughmungus that's great and all but I'm pretty sure that the sword wasn't able to eat someone's arm/haki when he said that
@DinosaurLover78
@DinosaurLover78 10 ай бұрын
Now we need a featured video of it cutting a mountain in half. 😮 Awesome work!
@jhublades
@jhublades 10 ай бұрын
I gotchu, I just gotta train in the ways of the sword for a couple decades
@lvkuang
@lvkuang 3 ай бұрын
@@jhublades and maybe lose an eye or two
@stormergamez7680
@stormergamez7680 Ай бұрын
@@jhublades you also might need to dye your hair green.
@philmcglen6194
@philmcglen6194 10 ай бұрын
This is absolutely amazing!! That blade is PERFECT! The hamon is beautiful and really subtle like you said. Well done mate!!
@jhublades
@jhublades 10 ай бұрын
Thanks so much!
@Treewha998
@Treewha998 2 ай бұрын
i can't tell if hamons come from the edge of the blade or he spine
@philmcglen6194
@philmcglen6194 2 ай бұрын
@@Treewha998 the edge. Because that's what's cooling quicker. It's like clouds meeting in the sky I suppose
@ladymanga6575
@ladymanga6575 9 ай бұрын
As a jeweller, watching you struggle with the habaki and tsuba reminded me of learning to work with base metals. I highly recommend using a scriber for marking your metal in future. You could also use circle ruler templates to make curves and circles.
@kayta4977
@kayta4977 9 ай бұрын
you really are the legendary swordsmith who forged enma
@jhublades
@jhublades 9 ай бұрын
Nah not yet, maybe someday though :D
@osirisatot19
@osirisatot19 8 ай бұрын
Glad to see another blacksmithing KZbinr that narrates the videos. I worry about ashi lines too so I make sure they don't go too close to the edge, I'm never trying to replicate anything from an anime though. It came out fantastic, and I love the purpleheart.
@vvinitt
@vvinitt 3 ай бұрын
Awesome 🔥 surely zoro oden and oda would love it
@zacharyjustice1667
@zacharyjustice1667 5 ай бұрын
I really appreciate your approach. I especially liked how detailed you were; talking temperatures, traditional techniques, mentioning work-hardening and how to work with it, etc. I also liked how you showed how you started over. Shows you care about your work.
@jammielee4302
@jammielee4302 8 ай бұрын
When I first checked out your website after seeing you on Forged in Fire, I couldn't believe how expensive (and sold out!) the knives were. Now, watching the care and attention you put into the creation of your blades, I see they're worth every penny. Beautiful work!
@cetriolioboy2710
@cetriolioboy2710 7 ай бұрын
out of all my years of youtube never in my life have i ever seen such a masterpiece made with such perfection in every aspect, never has a video itself drawn me to write an encouraging comment, and never have i seen someone deserving of a like and follow until today, the way you didnt stop until perfection was achieved really expresses the masterpiece you have made as a one piece fan and someone who can appreciate true art you have both shown what it is to truely show passion to something in a passionless world and you have shown the one piece community a fucking awesome sword. i hope to see more projects like this one done with as much care, and if i do see art done with this much care i hope to see you reap the rightful reward to your masterpieces. please keep up the good work
@hamdajalled5651
@hamdajalled5651 9 ай бұрын
If the Live Action ever makes it to Wano, I know exactly who i want to make Enma for them, I love how much effort and passion you put into this and I think you should be very proud of yourself.
@dustintolentino9463
@dustintolentino9463 9 ай бұрын
You're dead Before they makes it to wano
@thefearlessgamer2026
@thefearlessgamer2026 5 ай бұрын
@@dustintolentino9463 it will maybe take about 13 14 years maybe ?
@jaquielissonPA
@jaquielissonPA 9 ай бұрын
Esse é o comentário do fã de One Piece, brasileiro que vocês procuram. Enma linda, ótimo trabalho.
@vyomcodm2052
@vyomcodm2052 8 ай бұрын
From the handle to the blade The Guard LITETALLY everything looks SOO beautiful You forged a real beuty
@texaswader
@texaswader 10 ай бұрын
Very well done! Beautiful Katana!
@jhublades
@jhublades 10 ай бұрын
Thank you!!
@jacobwertin9614
@jacobwertin9614 8 ай бұрын
As a one piece fan I loved watching this! And it taught me a lot about katanas great job!
@Bloodshadow54
@Bloodshadow54 8 ай бұрын
Same
@lokigm1202
@lokigm1202 10 ай бұрын
Man, your work is amazing. It's a art that made soooooo much of a mark in history, a good smith could change history by simple do his best work to suply a army and all that. Really amazing man!
@NamTeGank
@NamTeGank 4 ай бұрын
I don't know why i cried at the end.. Maybe the way you are dedicated to your art moves me quite a lot. You must be a happy guy. I'm blessed to have found your channel/video. Thanks man !
@nikoalexiou5281
@nikoalexiou5281 4 ай бұрын
100% agree❤
@ripperdjak6224
@ripperdjak6224 8 ай бұрын
Love purple heart. Actually have a ring made for me that has it inside. The ring maker said it's one of the most difficult woods to work with because of how hard it is. Loving this entire video
@fonbiree
@fonbiree 8 ай бұрын
THIS IS SO SICK DUDE! Amazing work, effort, and care put into your Enma
@jhublades
@jhublades 8 ай бұрын
Thanks! I did my best to full-ass this project :D
@fonbiree
@fonbiree 8 ай бұрын
@@jhublades HAHAHA felt
@Tushii
@Tushii 10 ай бұрын
i really appreciate all the input and explanation you provide along the way
@user-rh2kp3gz6c
@user-rh2kp3gz6c 7 ай бұрын
I’ve seen a ton of katana making videos and none have inspired me to make my own like this video has. I only do stock removal and today I even bought a forge. Can’t wait to see more videos from you!
@Murseman2727
@Murseman2727 9 ай бұрын
Please tell me you'll eventually make the full scabbard for this!!! Such a beautiful blade it just seems like that is missing
@jhublades
@jhublades 9 ай бұрын
Ahh yeah, I was going to make a scabbard for this katana for the video but I underestimated how long every step of the process would take. I wanted to time the release with either episode 1 or 2 of the gear 5 release, so I just ran out of time unfortunately. I will definitely make a scabbard during my next katana build.
@diegocarrillo4324
@diegocarrillo4324 8 ай бұрын
You had a lot of difficulties, but you managed to create one of the most powerful swords in history, 100/10. May I suggest you make the elven sword in god of war ragnarok, it's like a katana
@shawnfromthebull6698
@shawnfromthebull6698 9 ай бұрын
Beautiful piece of work brother your truly a talented craftsman
@snowfox1800
@snowfox1800 Ай бұрын
Fantastic work I loved watching a craftsman at work
@teftefmedina
@teftefmedina 5 ай бұрын
This video is so honest and satisfying. Really enjoyed watching it!
@jamescarson1585
@jamescarson1585 9 ай бұрын
Ive been told preheating the quench oil before quenching helps bring out hamon or demascus patterns after acid dipping which works amazing
@wadechapman7397
@wadechapman7397 7 ай бұрын
Jesse, I became aware of your craftsmanship while bingeing on forged in fire the last 2 weeks. Please continue making videos. You have a natural talent and your attention to detail along with your drive for perfection are a pleasure to watch.
@jhublades
@jhublades 7 ай бұрын
Awesome! I will definitely keep making videos, I have some really cool plans coming up. The videography should also be improving a lot as I make newer videos
@aebidon
@aebidon 11 күн бұрын
Wow! Great craftsmanship skills and wonderful Enma sword 💪🏽🔥
@CIAG4PNP
@CIAG4PNP 3 ай бұрын
Beautiful work of art and craftsmanship!!!
@wongjs6826
@wongjs6826 10 ай бұрын
Making a piece of armor would be epic. Have you ever considered it? A Damascus medieval Mace would be awesome too, never got to see one. Would make your channel something unique. Keep the good work.
@jhublades
@jhublades 10 ай бұрын
Ooh that sounds like fun, only thing is there’s so much barrier to entry for armor, in terms of both knowledge and tooling. I’d have to set up a bunch of infrastructure to make a piece I’d be happy about😅 A mace would be… interesting… it’s not really a knife or a sword but it could be a nice experimental project
@keiny_jhon
@keiny_jhon 10 ай бұрын
​@@jhubladeswhere the bottom part?
@chongraxesh1
@chongraxesh1 9 ай бұрын
dont compare enma with old fcks
@chongraxesh1
@chongraxesh1 9 ай бұрын
why didntyou print and place the drawing on topof brass /tsuba
@chongraxesh1
@chongraxesh1 9 ай бұрын
woooaahhhhhhhh
@94hollinger
@94hollinger 5 ай бұрын
I just received my first “real” katana for Christmas so I’ve been going down the rabbit hole of katana content and I’m so glad I found this channel. Fantastic work and documentation!!
@pixellord1994
@pixellord1994 5 ай бұрын
Exactly what I have Been doing for 5 hr after getting a katana for Christmas
@pork2153
@pork2153 5 ай бұрын
This is the first time watching you, am a mechanic and woodworker and can really respect your work.
@p67y46
@p67y46 10 ай бұрын
Absolutely beautiful bro...Amazing to watch the journey of its making...Well Done!!!
@loonytoonyahh
@loonytoonyahh 8 ай бұрын
Dude…it looks amazing! It’s really cool that you can forge stuff like this. It seems like a lot of fun!🔥
@fefs3977
@fefs3977 8 ай бұрын
The NileRed of blades. Absolute legend.
@kingshank
@kingshank 8 ай бұрын
Fr
@steel4065
@steel4065 4 ай бұрын
The guard looks so good, I like the subtle hamon even if the anime’s is a lot more colorful and noticeable. The way you did it is a really cool realistic take on what the sword would really look like
@husnimubarek7778
@husnimubarek7778 9 ай бұрын
I just fell in love with this. Absolutely beautiful.
@Grayd3mon
@Grayd3mon 9 ай бұрын
I really just watched a 47 minute long video?! It didn't feel very long and the end result was super satisfying.
@joepete8687
@joepete8687 10 ай бұрын
Love your work really inspiring and I even used some of your techniques on my own knives I’m 12 and hope to continue making knives. Thank you.
@jhublades
@jhublades 10 ай бұрын
Thank you! I’m glad some things I shared helped, lmk if I can answer any questions
@FarmanNoori-pd4xh
@FarmanNoori-pd4xh 2 ай бұрын
Nah swordsman
@ae6888
@ae6888 5 ай бұрын
Marvelous craftsmanship! Your patience and determination paid off
@erinburns9405
@erinburns9405 9 ай бұрын
This is an amazing piece of art and it looks so beautiful
@austinfisher9652
@austinfisher9652 10 ай бұрын
I started watching this channel a while back and even though I don’t do anything like this, and I can’t get enough of your videos. I can just watch them fully without getting bored. Great work man! I can tell you are very good at what you do for how young you are. Also, I agree with the other guy that a mace would be awesome!
@jhublades
@jhublades 10 ай бұрын
I appreciate it! I’m very happy you enjoy the vids. I’ll keep the mace in mind😅
@Chronically-Stressed
@Chronically-Stressed 14 күн бұрын
This is his first video I have ever seen and that is criminal I wish I had found this sooner, as a die hard one piece fan and a katana lover, this is perfect for me
@pedropaku1777
@pedropaku1777 8 ай бұрын
This is great! Really loved all the commentaries and explanation. And its really awesome to not shy away of a failure like you've shown. Keep that up man. We need more person like you. Now time for the other 2 swords. Hahahaha
@user-rx4vs3kk4i
@user-rx4vs3kk4i 10 ай бұрын
Beautiful sword. I actually watched every minute of your video, normally i just watch 10 minutes of one then jump to the last scenes to see the final product, but your video was enthralling enough that i watched the whole thing, good video editing.
@thanasysdim
@thanasysdim 7 ай бұрын
Great craftmanship. This is a good sword. Oden would be proud!
@MASI_forging
@MASI_forging 10 ай бұрын
The KATANA looks so beautiful 👏👏
@jhublades
@jhublades 10 ай бұрын
Thanks!
@DrewProductions6
@DrewProductions6 10 ай бұрын
thank you for hand forging this! I appreciate the effort and you are showing a good example for all of the starting blacksmiths who don't have a press. thank you Jesse!!
@jhublades
@jhublades 10 ай бұрын
Hehe no problem, I love hand forging :D I remember watching videos when I was a beginner and always thinking “damn I don’t have any of those, I can’t do it then”
@Coolio_Ash
@Coolio_Ash 2 ай бұрын
Seeing you employing traditional japanese swordsmithing techniques is really nice. You know what youre talking about, you know the purpose of everything, and its just amazing
@Coolio_Ash
@Coolio_Ash 2 ай бұрын
Having the integrity to reforge it is an amazing feat. Be proud. If you aren't happy with it then what is the point? That's true of all art I'm sure.
@codelinx
@codelinx 9 ай бұрын
That was amazing. Love the process and thy end product.
@MMKnight_1
@MMKnight_1 10 ай бұрын
That "jumpscare" actually happened to me as well when I made my first knife handle out of some nice and expensive birch. It screwed the wood up around the hole I drilled, but in the end it thankfully turned out fine anyways.
@jhublades
@jhublades 10 ай бұрын
Oh shoot XD I’m glad it turned out well😅
@Dat1Guy007
@Dat1Guy007 10 ай бұрын
Kozuki Oden is an absolute unit
@jhublades
@jhublades 10 ай бұрын
He is THE absolute unit.
@dazzamcg2369
@dazzamcg2369 3 ай бұрын
Looks awesome , my grandpa was a blacksmith too before he passed. He was fascinated with mythology and history. He once forged the holy sword Excalibur and Durandal among a few other legendary swords/katanas. I still have them as part of a collection. I used to love getting into dueling matches with him. We were trained in kendo and yes we used real swords he forged himself 😂
@ElectricDogWoodworking
@ElectricDogWoodworking 2 ай бұрын
This is awesome! Very informative and quality work!
@H2o3G2a
@H2o3G2a 10 ай бұрын
I reckon this video will pass 2 million views and get you around 100k as total subs. Deserves even more
@jhublades
@jhublades 10 ай бұрын
I hope hehe, there’s definitely things I can improve for the next video though😅
@Jibbie_
@Jibbie_ 5 ай бұрын
The fact that I understood almost nothing shows how skilled he is.
@marctrossbach6560
@marctrossbach6560 10 ай бұрын
Your persistence is overwhelming
@julien_s
@julien_s 12 күн бұрын
this is truly beautiful!! insane work
@Anjfyi
@Anjfyi 10 ай бұрын
Loved the video. I have found myself with short attention span over the years, but your explanation walkthroughs are great and I found myself watching every second of this video. Keep up the amazing work Jesse.
@craigford33
@craigford33 6 ай бұрын
It’s not much. But here’s a new sub. This was awesome
@jhublades
@jhublades 5 ай бұрын
Massively appreciated man🙏 I’ll make sure to keep making videos like this one👊
@amirmotmaen9838
@amirmotmaen9838 10 ай бұрын
Watching this video was so satisfying! Great work.
@tomfox8923
@tomfox8923 10 ай бұрын
That hamon is stunning Jesse! Well done, great work!
@bentibbly437
@bentibbly437 9 ай бұрын
So. Where's your math homework... oh. My katana ate it
@jhublades
@jhublades 9 ай бұрын
I have to use that excuse sometime ☠️
@paullim3949
@paullim3949 10 ай бұрын
Man ive been waiting for someone to forge at least one of Zoro’s katanas! Nice dude ❤️
@jhublades
@jhublades 10 ай бұрын
I was wondering why there weren’t many already! Time to monopolize One Piece Swords😏
@paullim3949
@paullim3949 10 ай бұрын
@@jhublades dude I’m counting on you to do that! That would be awesome!
@user-fw3bh4xd6l
@user-fw3bh4xd6l 5 ай бұрын
That is absolutely stunning!! 😍
@christianolson8543
@christianolson8543 3 ай бұрын
I can’t believe you had the haki to wield that man! Out of all of the impressive things that happened in this video, that’s the most impressive thing! Jokes aside, very well done my friend. That’s just awesome!
@johnnykiehn1872
@johnnykiehn1872 5 ай бұрын
bro mixed satanite to make the hamon he's definitely making a cursed blade
@SupremeDoge35
@SupremeDoge35 10 ай бұрын
Great video. First where did you get your beautiful hammer and 2 can you make a damascus cu mai japanese tanto.
@jhublades
@jhublades 10 ай бұрын
Thanks! I got my dog head from Ilya, he sells them on the ThatWorks website I might try Cu-Mai sometime in the future
@mrs.cartwright3725
@mrs.cartwright3725 10 ай бұрын
Hey jess, the trick to getting the hamon on the blade is to have the clay thick enough so that the quench doesn’t suck the heat out so fast, that thick clay allows for slower cooling than the exposed edge.
@JoyCiticonti
@JoyCiticonti 8 ай бұрын
Stunning job mate, absolutely beautiful.
@deputydang8291
@deputydang8291 8 ай бұрын
What spray were you using at 40:13 to sand? Hamon looked great btw, as a woodworker I wish I had the confidence to do this. Only thing I think could have looked better is ray skin dyed purple for the Tsuka
@jhublades
@jhublades 8 ай бұрын
I was using soapy water in an unknown ratio, maybe like 3 full pumps for the entire bottle. Other people use WD40 or some other lubricant.
@deputydang8291
@deputydang8291 8 ай бұрын
@@jhublades Thanks for responding, hard to ever get an answer on the honing solutions a lot of people use. I've used mineral oil for a long time
@scopwastaken
@scopwastaken 10 ай бұрын
Nice technoblade merch BANGER
@jhublades
@jhublades 10 ай бұрын
Ty!! I had to represent, he cannot be forgotten 👑
@acuralee
@acuralee 6 ай бұрын
It's awesome you're making a blade and reading how to do it at the same time. Very skilled sir. Plus that anvil you have looks solid. I've searched pricing for those and they are not cheap. Same with all the other equipment you have in your garage. Thank you for the awesome content.
@dazai.ah.
@dazai.ah. 9 ай бұрын
That looks absolutely beautiful! Great job.
@keypeak2898
@keypeak2898 10 ай бұрын
EGG
@jhublades
@jhublades 10 ай бұрын
🥚
@omgitsjack3829
@omgitsjack3829 5 ай бұрын
So sick, It was awesome seeing your journey to making this amazing katana come to life. Thank you for bringing us along for the ride! :)
@Divine0_0
@Divine0_0 8 ай бұрын
This video was really satisfying to watch .thank u
@ketchupconsumer6861
@ketchupconsumer6861 4 ай бұрын
I watched the ENTIRE THING, and i think the sword turned out AWESOME, GREAT JOB DUDE!!🔥🔥🔥
@lukewilson195
@lukewilson195 5 ай бұрын
As a one piece enjoyer I do have to say you did an amazing job especially sense you made it yourself good work.
@matthewquackerz3981
@matthewquackerz3981 8 ай бұрын
Straight skillz!!! You looked super proud when you cut that empty paper towel roll in half! The things stupid sharp! Very aspiring!
@wilsonongweedun5697
@wilsonongweedun5697 Ай бұрын
Awesome man, great video and beautiful work🫰
@user-kw2en7fr5n
@user-kw2en7fr5n 9 ай бұрын
looking at enma on display at the end of your video gave me chills, all sorts of justice here!! thanks.....
@jhublades
@jhublades 9 ай бұрын
It gave me chills as well when we were editing the video 😅, I’m glad you enjoyed it👊
@franklinabreutapia2421
@franklinabreutapia2421 5 ай бұрын
I love your dedication to detail during this build! As a one piece fan, I definitely approve. Its impossible not to believe Oden and Zoro do as well
@justablackguy8527
@justablackguy8527 Ай бұрын
Just saw this and I'm all here for it ❤
@Ambitious.Gen1e
@Ambitious.Gen1e 10 ай бұрын
Yesterday marked my final episode of One Piece after 2 years of faithful watching the show happy to say I’ve seen all 15 movies and 1071 episodes in order‼️‼️‼️
@sev.d.sniper
@sev.d.sniper 9 ай бұрын
Watched this whole video and left completely satisfied 🔥🔥
@austinblakley6825
@austinblakley6825 6 ай бұрын
THAT looks REALLY GOOD!!!! i love it
@jonreyes2580
@jonreyes2580 10 ай бұрын
Beautiful sword. I can definitely see the trapped souls. Thank you for the great video.
@The_ArchivistG
@The_ArchivistG 5 ай бұрын
honestly id be up for a video thats literally just of the sounds. its very nice to listen to it so i can easily keep watching to see the process, and easily keep listening because the sounds are nice
@MM-jn2ny
@MM-jn2ny 5 ай бұрын
I like the way you edit your videos. Gives the viewer a good laugh while also learning
@l-GamingTime-l
@l-GamingTime-l 5 ай бұрын
this is great it looks very cool coming from a one piece fan that loves one piece so much
@vladimirkovacevic1656
@vladimirkovacevic1656 10 ай бұрын
beauiful katana and hamon,awesome sharpness
@Leo-jq7kt
@Leo-jq7kt 10 ай бұрын
love your work man, you are an inspiration and i have legit started forging after watching you. (badly yes haha). Thank you for putting this out there my man :)
@Ghost_AR50
@Ghost_AR50 10 ай бұрын
You make such beautiful pieces of work your such a hard working person keep up the amazing work 😊.
@TheStringBreaker
@TheStringBreaker 8 ай бұрын
*Well done! I admire your passion!*
@TheRealJoyboy94
@TheRealJoyboy94 8 ай бұрын
You killed this build! Great video 🔥
@danboad6363
@danboad6363 7 ай бұрын
This works is priceless. ❤
@baptistoriginals
@baptistoriginals 7 ай бұрын
i have no clue whats going on but i am fascinated! this is amazing
Forging a KUKRI | 100 Layers Damascus Knife | Martin Huber Knives
21:44
Martin Huber Knives
Рет қаралды 11 М.
Is it Cake or Fake ? 🍰
00:53
A4
Рет қаралды 19 МЛН
Making Tanjiro's Katana from [Demon Slayer]
31:11
That Works
Рет қаралды 18 МЛН
Making a $5000 Mosaic Damascus Cleaver
48:33
Jesse Hu
Рет қаралды 1,4 МЛН
Making an $8000 Damascus Katana
1:16:34
Jesse Hu
Рет қаралды 1,5 МЛН
How Japanese swords are made. The top-secret story of a sword smith.
39:52
ジャパニーズインダストリー / Japanese Industry
Рет қаралды 1,5 МЛН
MAKING A LONGSWORD [part 2]
9:54
Nedfly
Рет қаралды 39
Making a Twist Damascus Viking Seax
36:50
Jesse Hu
Рет қаралды 1,2 МЛН
Making the KARAKURI KATANA Whip Sword from WILD HEARTS
30:37
Njord Artisan
Рет қаралды 2,2 МЛН
JESSE'S BEST MOMENTS On Forged In Fire
15:44
The Juicy
Рет қаралды 1,5 МЛН
How Japanese Masters Turn Sand Into Swords
25:27
Veritasium
Рет қаралды 10 МЛН
Making A Katana for Call of Duty
33:09
That Works
Рет қаралды 1,1 МЛН