【加工動画45】旋盤でタップホルダー/How to make a tapping holder with a lathe

旋盤用タップ・ダイスホルダーに装着するM16タップ用のホルダーを作製しました。
旋盤用タップダイス・ホルダー作製の動画→ • 【加工動画43】旋盤用タップダイスホルダー/...
安全に配慮してアイデアの種にしていただけたら幸いです。
00:07 快段目盛15cmスケール(定規):amzn.to/3EoY8L0
00:30 粗削りチップ/Roughing cutting insert:amzn.to/34bOqgc
00:44 仕上削りチップ/Cermet insert:amzn.to/3r14JFA
01:33 中仕上チップ/Cermet insert:amzn.to/3AusWI0
03:11 ローレットホルダー:amzn.to/3L44Hpe
05:34 ER20コレットホルダ:amzn.to/3mzoiC3
ER20コレットセット:amzn.to/3prxjPs
15:54オイルスプレー(ルブリコ420):amzn.to/3Aqc6Ks
16:08タッピングペースト(非塩素タイプ):amzn.to/3He8YVX
背景音楽/BGM: New Land - ALBIS
撮影機材:amzn.to/3bNBj5D
使用した旋盤/Lathe model: ワシノ/Wasino LR-55A
背景音楽/BGM: New Land - ALBIS
We would appreciate it if you could use it as a seed for your ideas after considering safety.

[@allentighe9947]

@12min. Using the Cross slide for drilling depth is a very good idea.👍

[@jimsvideos7201]

この件についてビデオを作成するために時間を割いていただきありがとうございます。 ビデオとツールはどちらも非常に高品質です。

[@honaaki]

いつも見てます。本当にありがとうございました。

[@user-py5jy5qe2w]

Как всегда смотрю ваши ролики и получаю удовольствие от созерцания образцовый работы

[@brianu2871]

Great videos ! Rather hear the machining sounds than the background music.

[@Graive17]

Brilliant, as usual! I expect nothing less from this channel

[@puntoyfinal2553]

Este video se merece un súper gran me gusta. Por la pulcritud de la realizacion del trabajo y la ingeniosidad de esa herramienta.

[@amgeriz]

Simply great, raw sound clips make this channel even better

[@abdelrahmanelmasry9699]

Good job, good design and finish Overall excellent !

[@t0mn8r35]

Very nice project and excellent editing.

[@honaaki]

すばらしいでした

[@antonioherrera8171]

Great job my man great job as always

[@RB-yq7qv]

Great tool will be making one for my tool box.

[@edwarner4449]

Really beautiful! I just wish you put a flat pocket where the set screw goes into the knurling.

[@yeagerxp]

Excellent work 👍👍👍. Thank you for sharing. Be safe 🇨🇦

[@namnguyen052977]

Love your work ❤

[@cyrusramsey4741]

You do great quality work!

[@stringmanipulator]

Another fantastic video 👍👍👍👍👍

[@joewhitney4097]

Great video, Cool Tool! Thanks for sharing.

[@user-rg6hu9hs6d]

今回の動画に限った事ではないんですが、回転数を切り替える「カンッ！」って音がたまらなくカッコいいなって思うのは私だけでしょうか？

[@user-fc3vp8rl3r]

んる

[@ronmurphy9819]

Super nice tool. Any machinest should have this tool in their box of tricks! Thanks

[@vladimirFoto]

Production of means of production!!!!! handmade inspires confidence

[@fx4152]

Muito bom trabalho. obrigado.

[@MASI_forging]

The video was excellent as well 👍👍

[@kimber1958]

Nicely done

[@kamalkhadra8838]

.. clean, tight , and precise work.. greetings to you 👋

[@Bianchi77]

Nice video shot, thanks for sharing it :)

[@edimararaujo4525]

Very good! Show. Thank you for sharing

[@nagaragemdotorneiro]

very good work.

[@ashpalmer1365]

I really appreciate your videos. It's great to see that you use different inserts depending on the operation. I was wondering if you could create a video or write a comment explaining the specific inserts you use and in what situations. I struggle to achieve excellent surface finishes on mild steel, and I usually resort to finishing passes using the vertical shear method, which is quite time-consuming.

[@SwaplampJapan]

Thank you for watching. I'm not very familiar with inserts, but I think Sumitomo's T1500A material inserts are good for high-speed cutting to achieve a glossy finish on low-carbon and medium-carbon steels.

[@Strenoga]

Отличный ролик, приятно смотреть😁👍

[@homemadetools]

Nice work as always. We shared this video on our homemade tools forum this week 😎

[@janbahadar7746]

Very good

[@kentuckytrapper780]

Excellent job..

[@stingable]

Simply Amazing ! , Having worked with Japaneese I know how these are all possible

[@parnuzutech]

Awesome👍

[@user-nk4ir6wz6s]

汎用旋盤でタッパー使ったりしますがこちらの方が楽そうです😆

[@maximchu5813]

Perfect! 👏

[@paulbennett6379]

Superb properly done

[@user-tc2mb2qy7l]

0 м Здравствуйте!Я токарь профессионал,казалось бы ,чего я еще не знаю ,стаж работы сорок лет,но ваши ролики смотрю с большим интересом и уважением.Спасибо ВАМ.

[@danielboom26]

Fascinante, saludos desde Colombia

[@numcuong2079]

thank very much

[@BelevtsevD]

Очень круто, продолжайте! 🤘

[@Darkrif1957]

thankyou teacher ,i have another tool to make . Exellent video and Content

[@fredevindoortega1233]

Exelente trabajo. Que pericias.

[@Utomoteknik]

Bagus sekali hasilnya. Sangat mengkilap dan hasilnya sukses 💪💛❤️❤️

[@ziakhan-wl7ft]

Wonderful

[@amarkhan6426]

Nice ❤❤❤

[@user-iw9nw5fp9q]

旋盤も綺麗だし加工品も素晴らしい＾＾

[@alanmony1582]

How come it always look like you're starting with brand new equipment?

[@ustasRG]

Чистый токарный кайф! Спасибо!

[@rubinelemoura593]

Excelente ferramenta amigo grande abraço fique com Deus 👌👌👌👊👏🤝🤝🇧🇷❤️

[@egsoldagem3209]

excellent work, congratulations! Which oil do you use in this video?

[@SwaplampJapan]

Thank you for watching. The cutting oil used is Castrol Variocut C210.

[@mikesmechanical1102]

9:59 can someone please tell me why the tap ALWAYS comes loose just before you have it out. I know I’m not alone in this predicament

[@TurnerTokar]

Здравствуйте спасибо за видео

[@wyliemacbean1157]

Hello, another great video and fantastic project to make. Do you have CAD or drawn plans for the tap and die holders? Love your passion for your work. Cheers.

[@SwaplampJapan]

Thank you for watching. I'm sorry, but I don't have any CAD or drawings.

[@wyliemacbean1157]

Thank you, keep up the great work.@@SwaplampJapan

[@gregmarchegiani6656]

All protective of the work with the copper clamps, and the poor collett chuck is smashed into the three jaw chuck of the lathe subjected to heavy clamping steel to steel. Poor thing all marred 😢

[@KW-ei3pi]

Very beautiful work, ..... as always. 😊 What brand and model lathe do you use? Thanks

[@SwaplampJapan]

Thank you for watching. It is a lathe of model LR-55A of Washino Machinery.

[@Mahorokun]

Таким приспособлением опасно нарезать резьбу в глухих отверстиях, можно метчик сломать, нет защиты от перегрузки

[@ManiacMitrandir]

One of the next videos will be "how to make a lathe with a lathe")))

[@masami4786]

👌

[@user-nk8jq5km3s]

Это просто Токарный Рай!!!!!😇👌

[@kenmason1988]

Wow this is such a great tool, I wish I had one! Would I be able to contact you somehow so I can have one too?

[@SwaplampJapan]

Thank you for watching. Sorry, we do not sell this tool.

[@torrmann1004]

This is amazing, can you buy it anywhere?

[@SwaplampJapan]

Thank you for watching. This is not for sale.

[@AG.34470]

Здорово!!! Особенно для разовой работы. Три часа делаешь приспособу, чтоб один раз нарезать резьбу ИМЕННО ЭТИМ метчиком (потому что у другого размер квадрата другой), а потом положить её в «долгий ящик»

[@maximchu5813]

Дак со временем сделаешь держалки под все метчики)

[@user-cn1lt9yt8j]

а потом метчик упрётся в стенку, сломается, разворотит всю державку, и будешь еще 3 часа выковыривать обломок

[@user-jn3pd9ps5v]

Сделал на работе подобную приспособу, использую в купе с головкой зажатой в патрон, частелько бывает, что по 80-100 килограмм болтов м16 и м20 нужно резать, с такой приспособой можно и обороты ставить побольше ибо руками держать не нужно, скорость работы увеличилась кратно, а затрата усилий снизилась. И под метчики переходник тоже сделал, нужно много резать гайки м22х2,5 длинной 30.

[@nurjanboribekov2076]

Никогда не видел такого чистого станка у токарей. Какое масло используеш для резьбы и для смазки?

[@SwaplampJapan]

Спасибо за просмотр. Станок изготовлен в 2009 году. Большую часть смазочно-охлаждающей жидкости, которую я использую, - это Castrol Variocut C210. Для нарезания резьбы мы используем пасту для нарезания резьбы, не содержащую хлора, чтобы сохранить красоту станка.

[@user-nt6gd6pe3m]

センター数秒止めてますね。良き

[@user-hp3sp8jk6f]

طارق الاجنبي جميله جدا جدا جدا جدا

[@ARIFINLATHE]

Anda dan saya sama tapi lebih baik anda You and I are the same but you are better❤🇮🇩

[@wm210v]

Гениально

[@mars465]

sir , what kind of oil at 8:33 ? The oil I use gives a lot of fumes please tell me thank you

[@SwaplampJapan]

Thank you for watching. The cutting oil used is Castrol's Variocut C210.

[@alanmaughan7968]

I dont see any benefit to this tool over holding the tap in a drill chuck you already have?

[@mecatron8996]

Круто!

[@Mrthecrux1]

購入できるプロジェクトの図面はありますか?

[@SwaplampJapan]

ご視聴いただきありがとうございます。 申し訳ございません。 簡単な絵を書いて加工しているのでしっかりとした図面はありません。

[@tokup109]

ニュートラルで回転はあるあるですね

[@MrKulwindermankoo]

What kind of tapping paste are you using??

[@SwaplampJapan]

Thank you for watching. The tapping paste is C-100 from a company called Nihon-Kousakuyu.

[@PeterNetped]

[@mekanikmesin543]

👍👍👍👍

[@Ironman9665]

Идеально.

[@duocmat5192]

👍👍👍❤️

[@duocmat5192]

great, excellent, wonderfull👍❤

[@sasa-vd8ie]

你很好，我的讚美。 但不得不承認背景音樂累了，換點更歡快的吧。 你好。

[@robertburns2415]

👍🖖

[@felipebispo642]

🤯🤯🤯🤯🤯👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@adammiller4879]

Why is there no tang on the back of the taper?

[@SwaplampJapan]

Thank you for watching. I didn't think the tang was necessary because I was only going to use it on the lathe.

[@adammiller4879]

@@SwaplampJapan without a tang, the taper may not be enough to keep it from spinning in larger taps.

[@SwaplampJapan]

Thank you for your advice. When I worked at my previous company, when I was drilling stainless steel with an old big drill that had a damaged taper part with a tang, the taper came off and the tang was twisted. At that time, the tongue tried to push the drill extra and moved the fixed tailstock back. The drill did not break and the tang part was missing, and the inside of the tailstock spindle was also scratched. Personally, I don't want the tongue to act as a detent. When the taper comes off, it will run idle, but if there is a tongue, I think that the force that shifts the core will be added. Also, since it slides, the part on the tailstock side may move to the workpiece side and the tongue may come off.

[@adammiller4879]

@@SwaplampJapan spinning loose inside the tail stock may damage the taper, reducing holding force of the tool, the tang is to prevent that, while light applications it’s perfectly fine as shown in the video, but if the gang ever broke due to excess force, that may be a tooling issue, I have drilled 6 inch holes without a pilot and have never broken one. Quality steel is key. This may just be an American thing, but unless using a live center, all tools in tailstocks have a rectangular gang to prevent spinning in the tail stock and damaging it

[@SwaplampJapan]

Thank you for teaching me. Ever since I damaged the tang of the drill, I have been aware that the tang is the part that is hit when the drill is removed from a drilling machine. As you wrote, the Japanese tool maker's website also states that the main role of the tongue is to prevent rotation.

[@sykd59410]

使ってる切削油を教えて欲しいです🙇‍♂️

[@SwaplampJapan]

ご視聴いただきありがとうございます。 切削油はカストロール社のバリオカットC210を使用しました。

[@abdulkhalegalghamdi6635]

👌🌿💐👍

[@765pisuke9]

綾目ローレットの回転数と送りが気になる

[@SwaplampJapan]

ご視聴いただきありがとうございます。 綾目ローレットは回転数155rpm送り0.1mm/revで加工しました。

[@765pisuke9]

@@SwaplampJapan ありがとうございます。 自分はチキって100の0.06でやっていたので今度試してみます。

[@SwaplampJapan]

@@765pisuke9 お返事ありがとうございます。 直径が大きい場合は駒と軸との焼き付き防止のために回転数は落とします。 送り量については旋盤やローレットホルダーの負担を考えれば低い方が良いと思います。 炭素量の多い鋼材、SCMやステンレスなどの硬いワークには0.06m程mm/rev程度が最適だと思います。 反対に柔らかいアルミなら0.15mm/rev程度でも問題はないと思います。

[@765pisuke9]

@@SwaplampJapan 返信ありがとうございます。 金属加工業としては前回と同じ条件なのに上手くいかない事あるので1例としての糧になるのでありがたいです。

[@SAGAR92856]

I from india let me needed

[@user-ib4dd4yj4x]

Где он такие прутки берёт блестящие? У нас даже после складского хранения всё со ржавчиной!

[@SwaplampJapan]

Спасибо за просмотр. Я купил его у японской компании под названием Misumi. Материал прибудет промасленным и плотно упакованным в несколько пакетов. Это дорого, но легко, потому что вы можете заказать онлайн от короткого размера.