Jiabaida JBD BMS Troubleshooting▶️ Jbd LifePo4 BMS Issues▶️ Xiaoxiang App Fix LifePo4 Battery Build

[@RANDOMFIX]

You can download the professional version Download link-IOS (cannot be set): Search in the APP STORE Download link-Andriod (can be set): consumer version - in playstore Download link-Andriod (can be set): pro version radiobtech.freshdesk.com/support/solutions/articles/70000114128-android-xiaoxiang-application-fully-programmable-version- 280 AH Lifepo4 Cells s.click.aliexpress.com/e/_Ar8PQs Amazon link amzn.to/401KFT3 Current best supplier of BMS Grab the 100 amp 4s or 4s 120 amp version s.click.aliexpress.com/e/_AFAlX2 120 AMPS BMS on Amazon amzn.to/3FnDs6C 120 AMPS BMS option 2 amzn.to/3tDnbrz Secondary BMS for the best price, only grab the 5 amp version s.click.aliexpress.com/e/_9G5JUk Secondary BMS on Amazon for a much higher price amzn.to/3QlZKvE Recommended Victron 30 AMP battery charger Victron 15 AMP battery charge Victron 15 AMP battery charger amzn.to/3txiAqB Recommended 500 Battery shunt amzn.to/3ZY8H1i Recommended DC to DC charger for solar and Vehicle power amzn.to/3RYgEBP Recommended Solar kit amzn.to/3rM8Upg 100 piece lug kit amzn.to/3RZrnvT Tinned 1/0 Lugs amzn.to/45AkfsL 1700 piece hardware kit amzn.to/45CHumf use Bussbar instead of breakers amzn.to/3tHRltu Fuse for Bussbar amzn.to/3ZYDbAm Xt60 connectors amzn.to/3tC7qB2 XT90 Connectors -recommended amzn.to/46u4zsq 8 Guage wire amzn.to/3txiM9j 4 Guage wire amzn.to/3M0WvHC Fish paper - amzn.to/3M7fQqm Battery Box amzn.to/3M0WT8H www.manualslib.com/manual/1933154/Overkill-Solar-Bms-Series.html?page=29#manual LifePo4 Battery Build Series Video #1. Why Build Your Own Lifepo4 Battery - kzbin.info/www/bejne/oGGVloNqmZWhms0 Video #2. Putting the Cells Together - kzbin.info/www/bejne/r5TGmKaemJadh5o Video #3. Making Battery Studs - kzbin.info/www/bejne/g3KkpGikobBlZ6s Video #4. Top Balancing - kzbin.info/www/bejne/bHTSZqKHqZmEjaM Video #5. Attaching the BMS - kzbin.info/www/bejne/qYbUpmqJjs6dmpY Video #6. Using The App- kzbin.info/www/bejne/jJi9gYGfepWthtE Video #7. Troubleshooting, where to shop and save- kzbin.info/www/bejne/qKOwo5aBh7CUldk Free IOS JBD App View Multiple Batteries Simultaneously kzbin.info/www/bejne/e6e7nJ6kZ9pgg6s BMS App Comparision kzbin.info/www/bejne/b5nVlIKfmt6SmtU Fuse/Breaker issues kzbin.info/www/bejne/hZXOZ2OtrLhgl68

[@fathergratwick]

do you have issues with over heating on the BMS since you have the heatsink taped up? I would be concerned once its underload it may get pretty hot.

[@RANDOMFIX]

The BMW is not really tape up and I have no issues so far.

[@theborednerds]

Thanks for putting this together! I am having the same problem you describe in problem #1) battery voltage OK, but no voltage at C-. When I go into the consumer app, there is no lock. Whether I use consumer or pro app, if it hit the switch to allow discharging, the app says "setting success" but the switch unswitches. Any thoughts? I am able to set other charging profile parameters in the app, no problem.

[@RANDOMFIX]

So when you unlock the the BMS does the battery allow for discharge?

[@theborednerds]

@@RANDOMFIX I figured it out! It would not allow me to unlock the bms. It displayed it as "unlocked" (no lock symbol). I found a setting under "Function Setting" called "Switch function" by switching that to OFF, I was able to switch "discharge" to ON.

[@RANDOMFIX]

Good to hear

[@gregdevries6146]

Where can I find the professional app that you use on the left side phone?

[@RANDOMFIX]

Should be in the video description. Let me know if you can find it.

[@PizzaCologne3]

i have an issue, I was messing with the BMS setting while charging, after it saved my settings it got stuck loading bar, now its not letting me connect to the bms while charging, have you ran into this issue ? how do I fix that issue?

[@RANDOMFIX]

Sorry for the late reply, I appreciate your feedback did you get this handled?

[@gaetanbongard3337]

Hello how are you ? My BMS say always "100% charged" but my voltage stay at low voltage (for example 13.02v-13.3). (And the nominal capacity automatically change from 300 to 270, to 225, to 200 , ...) Do you think that I have the issue n°3 ?

[@RANDOMFIX]

Sorry for the late reply! did you find a solution?

[@alanbrown7155]

I have the same problem. Get back to me if you have managed to solve this issue. Thanks.

[@gajendrasinghbandi875]

I have a sp series smart jbd bms. It is not detecting charger.there is a charger detection port on bms but I Don t know where to hook up these two wires.please help

[@RANDOMFIX]

Find the wiring diagram online S I don’t know I can be of help on this one.

[@lancealderman2755]

My JBD bms shows about twice the draw as it should. I was having problems updating the parameter settings today and I completely disconnected the bms and then afterwards I realized the wattage/amp discrepancy. I'm out ideas at the moment...

[@RANDOMFIX]

Sorry for the late reply! did you find a solution?

[@lancealderman2755]

@RANDOMFIX no I sure haven't. I raised or doubled over current and max charge current and been running it since. I am going to order another one though and use the 13s that's messing up in a small project just for balancing and charge protection...

[@alanbrown7155]

I have a JDB 150 BMS & my BMS is draining my 280ah lithium lifeo4 battery, nothing is connected to it during the knight. I have tried everything. It looks like I'm going to have to get a new BMS.

[@kamalhussain8517]

Thanks , very informative

[@RANDOMFIX]

Glad to help and please don't hesitate to ask any questions. The batteries that should in the video are solid.

[@RANDOMFIX]

Sorry KZbin deleted your comment on the other video.

[@Djchamin1]

@@RANDOMFIX can the BMS do balancing without without charging

[@RANDOMFIX]

Yes with that 5 amp smaller bmw attached, the larger actual BMS is not adequate alone.

[@DrewAk49]

Apps are not even seeing a signal, does a panel have to be connected?

[@RANDOMFIX]

Disconnect the Bluetooth and reconnect, make sure the ibs is fully plugged in.

[@michaeldoherty2289]

You must buy Kapton tape by the case.

[@semitv6587]

Lol!!

[@michaeldoherty2289]

@@semitv6587 Its not really funny. This build is a mess. No other way to describe it.

[@RANDOMFIX]

Please explain?

[@michaeldoherty2289]

Do I really need to explain that workmanship is very important. I would not buy or rely on anything that looks like that taped -up mess. Just my bias. Workmanship and pride in work matters. It may work just fine, but what a mess of a job. There are many ways to build a prismatic battery, in my opinion, random sloppy wrapping with tape is the last method I'd choose. If I did one this way, I'd hide it in a good battery box and never show anyone my work let alone do a KZbin video on it. If you don't realize what a mess this is, I feel badly for you. Watch some other channels with good builds. Lithium Solar is one. Off grid garage. Freely Roaming. Will Prowse. There are many good examples. This is a mess.

[@RANDOMFIX]

Battery porn? if you want battery porn go for it. But if you want a solid battery then rewind. This is one guy with no production video that showed everything from start to finish. Take that for what it’s worth.