More convenient and precise multi trimmer table

▶Parts
•15mm birch plywood used
•Spade bit
•thorn nut
•Frog Knob

[@buxtor]

Excellent design and build! Enjoyable ASMR of the board fitting into the dado your trimmer cut so perfectly!

[@ildefonsogiron4034]

Muchas felicidades Miguel. Hay varias ideas nuevas e ingeniosas en este proyecto, sobre todo el brazo movil con su fijador de posición/Congratulations Mike. Your project contains some new and innovative ideas, specially the rotating fence with its non-skid knob assembly. Best regards and a hug from Mexico.

[@craig650]

Brilliant little router table, will definitely be giving this ago for my tiny workshop. Thanks 👍

[@Hessenclown]

Great design for a portable routerdesk. Thanks for sharing

[@henryrossouw930]

Brilliant build.Very simple solutions to some tricky problems when building these tables.

[@davekolp4552]

It's one of the best videos I've ever seen. No extra noise about life and opinion. Good job.

[@HansEgonMattek]

Agree

[@McMonkeyful]

Thanks for the idea. I built a simplified version out of scrap sheetwood, with an acrylic sheet top. I didn't bother with the height adjustment (using the one on the router base instead) and with the fence I added the pivot one end & use a clamp the other. I also cut in a gap for dust collection, as without it the mess was horrendous. My initial test was very succesful & this is a handy alternative to the big router table for small jobs. I'm going to use it for a few months to prove I need/use it & if I do, I'll come back to this video & build a proper one with all the bells & whistles :)

[@Zie_carpentry]

👍👍👍

[@ildefonsogiron4034]

Looking forward to it 👍

[@TheMCvamp]

Looking forward to the update :)

[@aliciabarrios-]

Es un gusto ver tu creatividad, el esmero en cada detalle...y el resultado final del proyecto, muy funcional... Gracias por compartir tus conocimientos de manera didactica, precisa y con una calidad de grabacion y edición excepcional... Ya tienes nueva suscriptora.. Saludos desde Argentina

[@user-vm9qr8ps8e]

Отличная идея! Просто космос! Оригинально придумано, качественно сделано, моё уважение. Постараюсь воспроизвести, насколько хватит моих навыков :)

[@SpiritOfChina]

0:04 посмотрите как столешницу раскачивает! Довольно не жёсткая конструкция. При фрезеровки глубоких канавок, на длинных деталях паз может получиться косым. Чуть надавил на протягиваемую деталь посильней и столешницу перекосит. Но если вас такая точность устраивает... то пойдёт.

[@flopperbob101]

Very well thought out and assembled. Beautiful workmanship.

[@namooin1139]

아주좋네요.이건 처음보는 방법입니다. 너무 활용성이 좋아요. 남는 자동차용 자키로 저도한번 만들어 봐야겠습니다.

[@JigShop]

네 시청해주셔서 감사합니다😌👍

[@rb-ex]

there's so much i love about the engineering and precise work here, including small details, like the fence clamp and many others but... i just don't have confidence that adjusting screw, which is far from the center of the cutter, will raise the table square, or that it will lock in place square and not wiggle out of square during use with that bolt on the side about a half a century ago i had a craftsman router with a gear adjustment on one side of the sleeve. to lock the router into the sleeve there was a bolt on the opposite side. the physics of the adjustment mechanism was like yours except the adjustment screw on the craftsman was much closer to the center of the cutter. problem was, the base was never square to the spindle and you couldnt make it square, because it moved out of square when you raised it and lowered it, and it again moved out of square when you tightened it in place, and it could move a little in and out of square during use your adjustment system would inspire more confidence if it included a smooth near-360 compression lock instead of that bolt on the side, because then no matter what happened with the table during adjustment, it is locking in square with friction of all sides so it's going to stay square during any operation

[@carlgradolph9676]

Brilliant. Simple yet clever design. I need to make one! I'm a clumsy woodworker, but if the first try fails I'll make another. Thanks for sharing this.

[@JigShop]

Thanks for watching.

[@mariocalderon8053]

Excelente vídeo y calidad. Por favor las medidas si no es mucha molestia, mi router se daño la base necesito hacer uno, el proyecto esta excelente. Ya me suscribi, saludos desde Ecuador.

[@mariaaparecidacarvalho6530]

The height adjustment is the key of this table. Excellent. Thank you.💚💛🇧🇷

[@ildefonsogiron4034]

A mi me parece muy importante la guía giratoria. Saludos.

[@giducklee2841]

대단하십니다. 10전 만점에 10점!

[@hunglikeahamster]

A very nice build. You've given me some nice ideas. I'm concerned by the lack of dust collection though.

[@martinstoev6102]

Very nice! I will do it for my workshop! Nicely done!

[@echoheim]

루터 테이블이 없었다면 한 번 만들어 보고 싶은 작품입니다 멋집니다 ^^

[@jumanpu1164]

Hola cuál mesa te refieres saludos

[@JigShop]

감사합니다^^

[@antonioc.b.desouza4564]

Excellent!!! Congratulations!!!

[@JigShop]

Thank you. Have a good day

[@lawrenceogden3736]

Great video, just subscribed

[@johnvodopija1743]

Superb design and execution! Thank you for sharing. Cheers 👍😎🇦🇺

[@frankcornfield5915]

This is an excellent project with great vision to see where how the solution can be found.

[@tassie7325]

Very smart idea, thanks Can you explain the significance of the side screw at 3:27. Cheers

[@omsingharjit]

It looks very clever approach 🎉😊

[@JigShop]

Thank you.😊👍

[@istvan4713]

Nice! Thanks for the video! 🙂

[@osvaldoanibaljuanin7986]

Desde Argentina!! Muchísimas gracias por compartir!!!

[@user-ct7oc9zq2r]

Не даром говорят: всë гениальное просто. Шикарный стол. Однозначно сделаю себе подобный. У меня их уже несколько, под разные виды работ, но этот просто хочется иметь. Классная вещь!

[@ferdinandbasques7715]

BEAU TRAVAIL. ... BELLE REALISATION.... SUPERBES IDEES.... FELICITATIONS👍👍👍👏👏ET BELLES PRISES DE VUES UN BRICOLEUR MARSEILLAIS

[@titol34]

Excellent idea bro. Very good video one of the best I'va ever seen. congratulations from France :-)

[@bricopath]

It's the best, so awesome. I will try to build one like this Thanks for sharing it. Greetings and respect from Morocco

[@nickspace6230]

Can you include plans and dimensions for the pieces? This is great. Thank you.

[@Assaf891891]

If you get the plans pleas send it to me

[@Parsifal54]

Great, a brilliant idea... the table moves, without complicated gears. Do you have plans?

[@joseespinozamere5307]

아주 좋은 작품

[@walruss60]

Absolutely Brilliant, thanks for sharing

[@walterfelipedipalma5164]

Questo tavolo è bellissimo....facile e molto funzionale....belo bello veramente....magari se puoi fare un semplice disegno con le misure in PDF....Sarebbe x tanti di noi....una cosa bellissima, anche via @...complimenti ancora👍😉

[@Assaf891891]

I m waiting to the plane , do you have ???

[@Assaf891891]

If you get the plane pleasssssss send it to me tanksssss

[@plainnpretty]

Nice design made well thanks for sharing it

[@ESTREPROD]

Great build. You should add a dust collection port.

[@user-ot8xd1hj9w]

Really enjoyed watching very nice thanks for sharing

[@user-te6yv7de5f]

Редкий по качеству ролик! Реально полезная вещь, которую легко сделать имея самые простые инструменты! Автору моё искреннее уважение! ❤❤❤

[@X3MT]

😂🤣🙃

[@josejoaquinurquijofiscal5500]

Super,🙏🙏🙏🥳

[@5phutsangtao-iQ]

장인의 나무접목기술이 아주 좋습니다

[@Zie_carpentry]

❤

[@JohnColgan.]

Brilliant design, lots of nice features

[@armagedonamadeus3797]

Excelente video ,mil gracias por su aporte en conocimiento

[@israeldornas7996]

Uau, simplesmente incrível, perfeito, vc é muito profissional, parabéns seu projeto é nota 10

[@Zie_carpentry]

👉❤❤❤

[@MarinoHomet]

Congratulations, nice project!!!, is it possible to have the drawings with the measurements?. Thank you

[@luisfernandoromero6716]

Por gentileza gostaria de saber as dimensões deste magnífico projeto.

[@linowanderley6931]

Ótimo muito legal meus parabéns excelente trabalho você é noto 10 😂☝👍👍👍 é o Brasil vendo o seu trabalho. 👏👏👏

[@user-sq3lh3tc3u]

💥👍👍👍

[@davidmcgrath6507]

Wow simply brilliant!

[@judithsolerrivas522]

impresionante felicitaciones Joaquin de Uruguay

[@ianharvey3696]

Neat as a neat thing, and so compact, gonna copy this!!👍👍👍

[@garyrussell5373]

Fantastic, please just a few dimensions.

[@ZombiePanda1776]

I've never seen a fly cutter like that before. Home made or purchased?

[@NgebikinDIY]

Very inspiratives! I’ll made one of this. Thankyou

[@user-px5hy7cq9c]

잘 보고 있습니다. 육각너트 가시너트 등 사이즈 가르쳐주세요.

[@thanasiskatsambas7534]

Hi there, Fantastic and simple design. Can I buy the drawings please?

[@user-hj7jh3nb2j]

Спасибо огромное за шикарную поделку!

[@siguretls]

ingéniosité maxi, sincérement bravo.....

[@amg4655]

1개 만들어서 판매하시면 안되나요?넘 멋져서 갖고싶어요❤

[@shilov9705]

Excuse me. How do it name your drill bit which you drilled a plywood?

[@pacidonodono7546]

Mantabs. Ide bagus.. Terimakasih banyak. Bogor Indonesia hadir.

[@kamilnovotny-dq6bx]

👍

[@user-yt8gb6rh1x]

Добрый день или вечер дорогой друг, я Владимир у меня есть вопрос а почему нельзя сделать в конце видео,2-3 кадра с размерами данного станочка, Ваша идея просто бомба для начинающих, у меня нет слов, скажу лишь то что мне очень понравилось Ваше видео,и мне бы хотелось очень сделать себе такой же.

[@Assaf891891]

If you get the plane , pleasssssss send it to me . Tanksssss

[@Assaf891891]

Pleasssss SEND PDF TO BUILD...........❤❤❤

[@vucuongly4836]

Thank you. I will make something like your solution

[@giovannicroce7039]

Genial idea y estupendo vídeo. Great idea and video. Podría Ud. indicar las medidas del elevador? Solo con el vídeo es difícil calcular. Could you raise the elevador measures? Only with the video It is dificult yo calculate. Thanks!

[@giovannicroce7039]

*"to calculate", sorry

[@t4steless348]

Do you sell your jig plans? ❤

[@sentilo840]

Great! How can I get a construction plan?

[@Assaf891891]

If you get the plans pleasssss send it to me , tankssssss

[@livianomuratori2014]

nice project. could you share the measurements?

[@Assaf891891]

If you get the plane pleassssssss send it to me, my friend tankssssss

[@nguyenvantu2118]

Om mani padme hum! rất cảm ơn bạn đã cho tôi thưởng thức với cái nhìn đẹp mắt và dễ học!

[@hervevandevoorde8457]

Good job !!!

[@svetlanagladkih4777]

thanks

[@MrKYT-gb8gs]

Good idea but the top wobbles too much. Needs some guide rails.

[@rollingstone3017]

That is a very good design. Might you give us the dimensions or drawing of the plans?😎

[@Assaf891891]

If you get the plan pleassssss dend it to me. Tanksssss

[@asd67lkj]

Some interesting concepts, there.

[@cokhichetao72]

Hay quá 👍

[@papajm1]

9:35 cst: do you sell plans for this build?

[@user-cn3xg6ty4e]

Здравствуйте, а размеры есть?

[@user-ox5yl9fi4t]

Кулибин! Огромное СПАСИБО

[@willwatlington6750]

Pivoting fence FOR THE WIN!!

[@doh285]

Genius cyster ❤

[@user-nt8hz5uh5x]

EXCELLENT

[@bigotedealpargata5532]

큰 나무가 작은 씨앗에 담겨 있다면, 광대한 우주 전체는 단순한 것의 작은 씨앗에 담겨 있습니다. 감사합니다, 교수님🇦🇷🇰🇷 Si todo un inmenso árbol está encerrado en una pequeña semilla, todo un inmenso Universo está encerrado en la pequeña semilla de lo simple. Gracias Maestro If an entire immense tree is enclosed in a small seed, an entire immense Universe is enclosed in the small seed of the simple. Thanks, Master

[@davidchambi-yj9qe]

simplemente genial.

[@gundur7193]

Ben çok beğendim.

[@user-us2ww5zn1s]

Отличная вещь.Вопрос какая толщина фанеры.

[@chrishayes5755]

no dust extraction or anything stopped dust from going back into the router. other than that looks nice.

[@JigShop]

Thank you. Have a good day

[@basilstadnik1342]

нормальная идея , только фрезы менять проблемно

[@user-wm2wm7mi2e]

Круто!!!! А всё таки размеры можно выложить?????

[@vasiliykolesnik-wv1ti]

4 х 20

[@user-wm2wm7mi2e]

Это что?

[@user-xg2kl6bo1p]

Очень хорошо.

[@ramontechtavares4698]

👏👏👏👏👏🤩

[@timothybaker8234]

Now to build a small box joint fence to go along with it.

[@Twotrees3Dofficial]

Hello, sir, I adore your talent videos! How can I have the opportunity to cooperate with you?

[@ThFitz]

i got bored about 2/3ds of the way through. Because I had not seen a thing that i cound not duplicate and without any of the fancy gimmicks.

[@Assaf891891]

Can you send the plans to built it ????????????? pleasssssssssssssssssssssssss

[@AlexisJVargasS]

podría subir como se hace esa broca para cortar circulos

[@dirceudonisseli3025]

👏👏👏 Muito bom!

[@sadolbalo]

это лучший вариант!!!

[@hoangnam-woodworking4711]

❤