Tire MELTED On World's Fastest Airplane

Buy Merch here: www.SaveThe310...
Save 10% on the best Sunglasses made. Lifetime Guarantee! flyingeyesopti...
Code "JimmysWorld" They even do prescriptions!
Give Today to Help #SaveThe310. This story is only just beginning :). More to come soon!
givesendgo.com...
Facebook: / jimmys-world-104845438...
Instagram: / therealjimmysworld
View the Entire 310 Series: • I just Bought 3 Abando...
Other Abandoned Airplanes:
Abandoned for 20 years, Will it RUN? 1947 Bonanza V-Tail • Abandoned Airplane Wil...
Abandoned 7 Years, Can I get it running? 1968 Piper Aztec • Abandoned Airplane Wil...
10 Fastest Cheap Airplanes You Can Buy For Your Family • 10 Fastest Cheap Airpl...
10 Fighter Jets You Can Buy! • 10 Private Fighter Jet...
For Business/Media: [e-mail]

[@ewratcrl3772]

I am gonna go with the C310 Silver Bullet. There is nothing sweeter than the sound of those Continentals and the sleekest of designs EVER! Love your videos!

[@Antonyg2100]

Cameron is like pulling up with a moderate sports car, while the silver bullet is a candy apple red sports car with a great exhaust. Both are cool planes and great to have people saving these and keeping them in the air. Love the vids! Thanks!

[@therealjimmysworld]

HAHAHA, that's awesome!

[@DQQ167]

@@therealjimmysworld get a beachcraft duke please

[@FlyMIfYouGotM]

Finding the ground after takeoff isn't difficult. The difficult part is being able to reuse both the pilot and airplane without major repairs to either one after finding the ground!

[@noelobrien7743]

Good to see you turned it all around to this great appeal helping victims .. Well done Jim ..

[@Starsnu1]

Great video. Years ago I was the flight engineer on a DC-10 that upon landing at LAX we heard a loud boom followed by ATC informing us of smoke coming from the right main gear. I told the captain that those were all brand new tires and brakes. After we were towed to the gate, we went outside to look over the right gear. One of those brand new tires had blown out completely. What happened was that the new brake on that tire had frozen which likely happened upon gear retraction. It was evident that the wheel had never turned upon landing so the rubber ground down immediately upon landing. The tire was perfectly round except for the area that made contact with the runway. That section was perfectly straight! Several hours later we were on the next leg of the journey with that airplane with a new brake and 4 new tires.

[@naughtiusmaximus830]

Scary. You could have retracted a burning tire. Wouldn’t be the first time that happened.

[@Starsnu1]

@@naughtiusmaximus830 we would have known if it happened on takeoff by either feeling or hearing it blow and the tower or other aircraft telling us they see smoke. When the gear are retracted the brakes are applied to stop the tires from rotating. We think that the brake which was brand new failed to release and stayed locked or “Frozen” to the wheel which prevented the wheel from turning upon landing.

[@naughtiusmaximus830]

@@Starsnu1 I used to think flight engineer was the crappy job on the flight deck but it’s actually the coolest one. Radio operator plus flight systems.

[@flexairz]

@@naughtiusmaximus830 It had frozen upon gear retraction.. it probably was fine on take off.

[@normplatt7549]

Thanks for sharing! Jimmey you the MAN! Don t prang your prop!

[@therealjimmysworld]

You got that right!

[@CootersScooters85]

Been looking forward to another video. Love the content Jimmy

[@dougpartington1843]

The joys of ownership, thankfully you were able to get it replaced quickly. I was hoping to see the upgrades in the Silver Bullet. Received my t-shirt this week, love it.

[@wamb17]

Your a legend Jimmy. When can we see the T6? I’ve flown one, beautiful aircraft 👍👍👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@riverakers]

Good job training future pilots.This country needs them.

[@therealjimmysworld]

big time!

[@EveryoneIsFightingSomeBattle]

I’ve seen similar tire failure anomalies on fixed gear aircraft after being subjected to the heat of atmospheric reentry.

[@therealjimmysworld]

hahahaha

[@EveryoneIsFightingSomeBattle]

@Brandon Balloon - both NASA and the ESA spell it as “reentry” - without the hyphen, when referring to objects, vehicles, etc. once again entering the earth’s atmosphere after coming out of orbit.

[@EveryoneIsFightingSomeBattle]

@Brandy Balloon My apologies for the misunderstanding and taking it the wrong way. I do appreciate that you appreciated my humor 🙂. None of my friends do - they usually just roll their eyes at me....LOL

[@davestelling]

Good Morning, Jimbo - I love it when you take us flying. Take care...

[@gregbutler9873]

Tire go “ POP “ Jimmy changes pants . LOL 😂 at least you didn’t get hurt and no major damage to your hot rod .

[@davestelling]

lol....

[@michaelfortunato3117]

Happy Birthday, Airman, and thank you for your service to you, Jimmy and all other Airmen today!

[@Wizardsfly]

One thing that doesn't get mentioned is the work you do for our youth and other people! Thanks for all you do jimmy. Wheels Up!!! Can i get a (Clear prop!)

[@charlesrose7876]

I would always vote for the Silver Bullet, it is the pinnacle of general aviation at it's peak.

[@area51ray]

When peeling gap tape sometimes applying heat with a heat gun while peeling will soften the glue enough to release the tape without lifting the paint. Then you can clean off the remaining glue with the mineral spirits.. (Might be worth a try) Many rc pylon racers and rc glider pilots use gap tape on their models.

[@Привид_Бандери]

Especially if it's new

[@billyhaddock5540]

Congrats Jimmy on landing good with the bad tire.

[@michaelmartinez1345]

Yes , both planes are very nice... Cameron, might be the one- if the stock OEM mags are being used... But the 310 is just cool beyond words... I'd take the Sky King 310... BTW, be careful of applying external tape, if it vibrates rapidly, it can cause damage to the structure it is stuck to.... It is why we used aluminum (600 mph) tape on planes that had aerodynamic sealant (PS-870) in the gap laps, underneath the tape that needed more time to cure.... Aluminum tape won't flutter as easily as thin plastic tape...

[@terrallputnam7979]

Congratulations on selling Gweedo! I am excited to hear that you are doing more airplane saving! I always hit like before the video starts because I am never disappointed. Cameron is super cool! The Silver bullet is a sporty family car, Cameron is a Ferrari, Lambo, Audi R8, or Corvette, Take your pick! I am getting excited about the cooler mornings with light or no wind! My Ercoupe gets almost 100mph on 4.5gph. I agree with you Jimmy, the people at our airport are some of the nicest people I know! Great people at N FLA.

[@patshes1951]

Your achiles heel shows up again! Landing gear!

[@therealjimmysworld]

Always!

[@chadtipton8825]

Jimmy- We love your stuff! We thought of a catchy phrase you may enjoy using. "Give it the Juice and Turn it Loose! Can I get a, clleeeear prop!" Give it try in one of your next videos! 🤟🏼 The Tipton Family!

[@ZZstaff]

Thank you

[@keithb6717]

thanks for showing the wing icing. I always wondered what that was

[@patshes1951]

Good choice!

[@jpallmann]

Congrats on selling Guido! Excited for them and wish Guido luck in St. Louis o7

[@Laz_Arus]

Hey Jimmy, it might be an idea to check the year of manufacture on that new tyre. I presume there is a marking as such on aviation tyres similar to those found on automotive ones.

[@GlennsSpeedShop]

Mid 70s Electric Car? I just bought 1975 Vanguard Citicar over on my channel st Glenn's Speed Shop. They were made in Sebring Florida. Can't wait to see what you bought.

[@pz5232]

Looks like you’re going to need touch up paint in a few spots

[@kheaslett]

Jimmy.... you are a Great influence !!! you now have me yelling out... can i get a CLEAR PROP with every switch i flip that has a motor !!! 🤣 my SUV... my john deere tractor... even my blender !!!🤪🏁

[@battz99]

Yup, the aviation community is great. I was relocating one of my planes from the UK to sw France in 2020 and the battery charging failed due to a bad connection. I had to land three times to refuel and beg for help to get the engine restarted. I went into a large professional hangar at Blois in central France where a team was working on a Twin Otter and they all dropped what they were doing and came out with a booster pack on wheels to see what this crazy pilot was up to. The last time a guy came out with his car and some jump leads which were so short he had to park the nose of his car under my airplane's propeller and carefully reverse it out after I'd jumped out of the cockpit and disconnected the leads with the plane's wheels chocked when I'd restarted the engine.

[@asherbellamy1069]

Cameron is the one. You got a flat tire! Well at lest you got help on your side from that nice man. It was nice of him to put on new set of tires for cameron. I like that plane it shud be in the air show that would be cool to see.😄

[@i.r.wayright1457]

I have a photo of a tire with a hole in it and the tube is sticking out in a small bubble, from a PA-28. It's hilarious. But, I landed an Aztec once with a bit too much toe brake on the left side, but I let off as soon as I heard it squealing. So no foul. Jimmy, every A&P ought to have one of those "What Could Possibly go Wrong" tee shirts. The Feds would love it when they came by for a compliance check.

[@georgew.5639]

I think you need to keep the world’s fastest single engine light airplane out of the hypersonic speed range. Lol! 😁

[@ronnydowdy7432]

Bummer

[@HamBown]

A heat gun or hair dryer would do wonders to loosen up the adhesive on that gap tape and keep the paint on the airplane.

[@MrJorgerocha]

Hi Jimmy's. I was in the hospital , for long days ( i was on very bad shape) Ohhh God I miss watch your vídeos. I very scared to day . I all the time thinking " I will die before have chance to see Jimmy " . in my worst moments I just thinking about have chance to see you. They say in my delirious moments that I call your name. God bless you 🙏

[@wayneroyal3137]

How hilarious! We are based at HEG and was inbound when the NOTAM came up! Line guys are great! Would have liked to have met you for sure!

[@Iz0pen]

Hey Jimmy, would you consider doing a ride in an icon A-5? Love to see it

[@therealjimmysworld]

That would be cool!

[@Minecraft-gw1jv]

$500 Tire🤯… Aviation isn’t a Poor Mans Industry…

[@eugeneweaver3199]

Cameron!

[@thunderbolt513]

As much as I adore the 310 "Silver bullet", u speak fancy fast, u speak Cameron

[@battz99]

Was it worth putting the tape on for a few extra mph given the damage it's done to the paintwork? I leave you with that question...

[@troyw8338]

You should of Burned up the Dinos and took the crome eagle. Always reminds me of the old military Jets when I see you leaving the ground. 😁

[@hadleymanmusic]

Im glad you werent stuck

[@marknielsen8738]

This comes a little late but just in case you haven't considered this.... I learned in Grumman Cheetah's and Tigers, all with castering nose gear so ground control via differential braking. Personally love it, they handle like ballerinas versus say the PA-180 aka the flying dump truck. BUT you learn to apply power SLOWLY on the take off roll. Use LIGHT braking until you get rudder effect then GO! Not always possible but any rubber saved is a good thing.

[@hpijeep]

$466 for a tube and tire seems high. It’s been a couple years since I’ve had to buy one. Guess they’ve went up also

[@robertthomas5906]

Itemized it didn't seem that bad. The killer was the labor. $180 for 1.5 hours or 120/hour. Tube & tire were about that each. The good news is he was able to get it done and wasn't at some airport where nobody is there. No body, no bathrooms, nothing.

[@gunfisher4661]

@@robertthomas5906 All in all though the labor was similar to auto dealer labor charges. I`m wondering what it would have cost if he had to do the brakes looking at an auto mobile witch runs at about $350 a wheel for just pads.

[@robertthomas5906]

@@gunfisher4661 $350/wheel for pads? Man, I'm so glad I know how to do that myself. I also replace my own hubs and CV joints.

[@zeberdee1972]

Oh Jimmy that hole in tyre not only is a hole in the tyre but in the wallet to !!! . Still look on the bright side at least you know the brakes work 🙂. Cool video as always

[@MADKIWI]

G'day Jimmy from NZ... the best tape to use is white silage tape super sticky and very strong m8... enjoy...

[@bertharnois4088]

When you park them Jimmy maybe putting some Damp-Rid will help with reducing moisture and corrosion. I use it in my boat too.

[@z1firgaming352]

Im going with the 310 Silver bullet.

[@jamesmichael3998]

You're in my neck of the woods, Herlong is on Jax. westside and I'm over at Craig field on Jax. Southside. Have a good flight. Cheers from Jacksonville Florida 🌞

[@U_ever]

"LIKE" button torqued to manufacturer's recommended specification and safety wired in place. "CLICK"

[@aleramos470]

When removing glues or tapes the best solvent to to use would be WD-40 that would remove and protect the paint better than mineral spirits and if by any chance u have a heat Gun it will make it faster

[@awesomecronk7183]

I fickin love that Lancair...

[@cheap_pilot]

The tire may have blown on landing. Pressing on the brakes prior to touchdown, or before the weight settles onto the gear, will instantly tear right through the tire. I owned a flight school long ago and students in high performance airplanes would occasionally do this on short runways. Controlling a plane without nose wheel steering requires light braking early in the takeoff roll, until the rudder becomes effective. Unlikely to blow a tire.

[@WellRoundedWoodsman]

You need to save that Cessna 150 in the corner of the ramp. I used to own it and it was a great flyer.

[@wyateerp1]

Have you thought about leading edge TAPE ? Its very dueable and flexable, i used it in Iceland to make a Playboy table. Just a thought,,,

[@wyateerp1]

Just use some alcohol to clean the surface,, Stuff is TUFF

[@wyateerp1]

AIRFRAMES ON P3 Orions, "76-80" NAS JAX Florida. Its the best i think would work if thats your GiG.Good luck, and i watch your Vids all the time. better than Rebuild .. Good luck

[@asadgonza]

Great Job

[@lcfflc3887]

he should send you a rebate check over that wheel replace for all that free promo and publicity you gave him at the end, it translates in to new future customers.

[@weld4200]

Yes another vid . I was begining to have withdraw . ..cameron is just a beast . I mean what can ya say...also jimmy ...it maybe time to get a pellet gun for those birds lol

[@bernardjones6162]

Your Schneerbart is looking great! ( Mustache)

[@rverro8478]

I prefer the Silver Bullet but, there's the fuel consumption to consider. To me, Cameron is good for commuting while, Silver Bullet is good for travelling.

[@guyguthrie3236]

Hot and high no wayno on the tires.

[@kathypriddy8430]

Silver Bullet

[@luftwicker07]

6 miles from my house and I didn't even know it. Stop at Craig next time and give my Pitts some speed mods. 😂

[@plasmaDave]

Love the 310, cameron not so really. 👍

[@Mouse7575]

TS-305 by chemical consultants is a printers solvent that works really well breaking down adhesives. And environmentally friendly

[@ChristopherFreedom]

I have to agree.. it's the best I've ever used as well.

[@clarencewiles963]

Bulletproof incoming birds 🐦! You never look up as birds fly over. Heat gun will soften the glue FYI. Did you hear about the new iPhone 14 it’s also a satellite 📡 phone. I think it’s free sat for 2 years check with T-Mobile. Middle of nowhere. Thanks again for your work!

[@flygpagen]

Use a hairdryer. Moderate heat softens the glue and the tape will come right off. Wipe clean with label-off or isopropanol.

[@j2w991]

Silver Bullet, Always👍👍, Says this Jimmy🤣

[@franksando635]

Jimmy always enjoyment to watch one of your Videos 👍 and to see What Could Possibly Go Wrong 😂👌

[@sheepdoglogic]

The cost to replace that tire was pretty much the same as the cost for my HD rear tire at HD. Same as a high dollar auto tire but not as much as a semi in some cases.

[@MARKLOCKWOOD2012]

silver bullet fuel burn test and challenge fully laden both tip tanks and mains see if you can burn less in a flight?

[@garymessina1609]

A quick way to spend an afternoons cash thanks Jimmy for a fun video

[@julianreedy4338]

JIMMY JIMMY JIMMY JIMMY!!!!!!!!!!!

[@itsverygreen532]

Just as a reference point ... that fuel in the UK woudl have cost $234 Yup, double. We pay £2.45 per litre for 100LL

[@jameslaurencesmith7537]

jimmy,,,, well done by the way,,, ! here in england they auction ex military jets off.. you could have bought a english electric canberra ;twin rolls royce avon engines, the whole plane will sell for $8.000 more or less ..... you need to get in touch ,,, regards laurence

[@davesaldana7263]

Silver bullet, awesome!

[@brentcranford]

Herlong is where I took my discovery flight. I absolutely loved flying but money and time was an issue so I never had the chance to get my license. I really wanted to but as the sole provider for my family I couldn’t spare the time. If you are ever back in Jacksonville give me a jingle.

[@frankienv3906]

Never under estimate Jimmy's ability to screw up an Airplane....LOL

[@johnnyg419]

My buddy and I blew a tire upon landing in NW Massachusetts. It does suck, lol.

[@Xpyburnt_ndz]

you need to take Cameron to Reno and race it jimmy!!! 😃

[@stephenreese5921]

Thread showing through on your tires is a mandated tire change. PM Jimmy!

[@buddyrevell6369]

Can't hide those bug eye lights on the sebring vanguard citicar that you are looking at.... if you want to do anything with it, it's going to require a gutting. Engines are underpowered. Looking at no more than 40mph on a good day downhill even with modern controller and LiOn.

[@rahnlawson9463]

The expansion coefficient of aluminum is 11.7, what is the expansion coefficient of that tape?

[@rogerclarke3291]

Still looks fast with a cast on lol. How about a cool livery on the side of Cameron ? Thanks for posting.

[@brentmcmahon8188]

You have to use acetone and it will stick and not come lose !!

[@richardcox6935]

Cameron RULES!

[@JAGrossman1]

reminds me of what my dad always said right after washing the car then finding bird droppings "for some people they sing"

[@raybowles8587]

Great video. Was that a $50 tire and $350 labor? I would have just patched the tire....just kidding. I saw a guy on youtube use expansion foam in a tire. Not sure how that worked out. But what could go wrong, right?

[@Orbacron]

Large turbo, or even twin turbo.. And a very noticeable increase in prop pitch.. Just enough to get takeoff speed.. And yeah record speeds are a real probability

[@DaVilla1126]

Was that at Herlong airport? That is close to Cecil Field here in Jax.

[@dirksichel4215]

Hey Jimmy get off that brake and kick that vertical stabilizer in bro !

[@wvimgr]

You might take a look at turbularor tape (dimple) for Cameron.

[@rexmcstiller4675]

Do you have a Lithium battery instead of a lead battery inside?

[@therealjimmysworld]

old school Lead acid for now... :)

[@rexmcstiller4675]

@@therealjimmysworld Litiums batterys are a lot lighter so maybe you can tickle out half a knot

[@Mrjokerman]

Hey what happened to your mechanic that was a big show with them and with you working on stuff that was very cool I love to watch that and I like Aviation very much I watch your show all the time it looks really cool when you have a working on a planes and yeah your mechanics working in there that was very awesome what happened to all your crew let me know

[@Mrjokerman]

I'm great how about you how is your day going always good to put out good movies like you do I would like to see you more of building on airplanes

[@Xanthrochroid]

Jimmy, apologies, if this has been asked before, but I’m wondering why it doesn’t appear you’ve connected with BrYan on his channel ‘Just Plane Silly’. It would seem you are kindred spirits. Meanwhile, I love your vids; they’re always a nice respite from everything else going on the world.

[@Boomer9985]

Jim next time use a blow dryer or a heat gun to remove that tape ! It also works great for taking labels off packages !!! Have fun 😊

[@johnjlamparteriii1591]

Silver bullet hands down no second thoughts no hesitation no changing your mind get in it and go

[@stefansoderback5074]

Tip of the day: use heatgun to remove sticky tape and decals 👍