So if your not relocating the license plate then just skip removing the bumper?
@sQriLLah Жыл бұрын
Doing this install right now! Camera connector hard to take off and showing shang the process. Still debating if i want to move the license plate light.
@ajirazak2389 Жыл бұрын
Will it fit a 392?
@JeepinJordie Жыл бұрын
Why doesn't it sit flush to the tailgate? Seems to have a small gap all the way around the unit when installed.
@teraflexsuspensions Жыл бұрын
Make sure that it is not caught up on any of the hardware, and that all of the hardware is fully seated and tightened down.
@MrMvp8402 Жыл бұрын
I bought this in a bit of a rush, and watching how much work it is makes me just want to return it. I like the idea since no bike rack seems to work with a 35 inch tire, even with a relocation bracket. I've tried Bell, Yakima ridgeback, full tilt, some cheap brands, and now the Kuat NV 2.0 and nothing works... seems like it's either getting rid of the spare tire or getting rid of my jeep are the only options.
@constantineeliadis5582 Жыл бұрын
Forget relocating the license plate. It's fine where it is. Then makes the job about 20 minutes. Well-made product.
@robertodiaz1974r11 ай бұрын
Where i can that backup camera? What is the model?
@james70442 жыл бұрын
Can you still use a license plate frame around the plate with this kit?
@teraflexsuspensions2 жыл бұрын
Yes, depending on the frame thickness
@JEB742 жыл бұрын
Does anyone make a blank plate for the hole left in the factory bumper after I remove the license plate light? I realize I can just leave the light and order another one, but was trying to find a different option. How about an affordable replacement bumper?
@brianschor38322 жыл бұрын
Did you ever figure out anything for this?
@james70442 жыл бұрын
Are you referring to the 2 holes where the plate is mounted?
@d.a.b23742 жыл бұрын
Never mention that need it a t8 torx
@brianschor38322 жыл бұрын
Is this panel paintable?
@ericschmidt19875 ай бұрын
Where would you want this u less your car is the mall crawler
@erockshabazz92823 жыл бұрын
Is there one for the JK?
@teraflexsuspensions3 жыл бұрын
We do not have one for the JK at this time.
@rockyp5442 жыл бұрын
That’s alot of work . I just want to take the tire off to save gas mileage for now. The oem carrier looks like crap without a tire.
@waleedobdt99408 ай бұрын
Ordered ✅
@Ahmad-lc3dd2 жыл бұрын
How long is the install ?
@teraflexsuspensions2 жыл бұрын
30 minutes!
@Ahmad-lc3dd2 жыл бұрын
@@teraflexsuspensions I’m having a hard time removing the camera housing. Removed the screws, and knocked on the actual 3 lugs, they came out attached the the ring looking piece. But the gasket that’s holding the camera housing in place won’t come out.. idk what else to try
@nathanmilsaps98432 жыл бұрын
@@teraflexsuspensions 30 min if you are a Teraflex God! Us mere mortals will probably take 1-3 hours.
@jooshfutterman Жыл бұрын
@@teraflexsuspensions I feel like you meant to say hours instead of minutes
@JohnSmith-bq7gz3 жыл бұрын
So if you get a flat your walking I take it.
@dougpovee2 жыл бұрын
Not if you have a tire repair kit and compressor. But if you slash your sidewall you might be walking...