Husqvarna AWD Push Lawnmower Doesn't Propel Well?

[@alexanderchuyko4889]

A really nice tutorial!!! I was looking for a video with a clear explanation of how does this AWD transmission work. I couldn`t understand how a variety of speed can be reached. No automatic gearbox like for cars. The engine is working on nearly constant speed. The question was how it works by pressing a handle bar only... I was shocked with this. It seems to me, the lever/handle bar provides different friction in between belts and pulleys... just by apply different tension. Wow... that looks like a kid`s toys. At least belts must be regularly changed in this case. Can you tell me whether all the AWD movers work like that or there is more smart and proper speed managing system in the world, please ? :)

[@JLPicard440]

HI, many do work this way.... Lawn tractors that aren't hydro transmissions and have a gear shifter use a pulley system where there are 2 belts into one pulley. The different tensions from the gear shifter moves the center section up and down and changes the pulley ratio and thus the speed.... It doesn't really cause the belts to wear out fast since there's no real slippage.

[@JarodGRAF]

Excellent video. Saved me a bunch of time

[@JLPicard440]

You're welcome!

[@subramanyamsarvepalli5294]

Excellent job sir😃

[@JLPicard440]

Thank you! Cheers!

[@zarski_motos]

Pain in the ass,I was going to buy one of these tomorrow,I'm not thinking so now.

[@JLPicard440]

Its not that bad!...

[@JasonSmith-qx3zh]

I'm missing that spring thanks for showing that I wonder what that spring is call???

[@JLPicard440]

It's a return spring to hold tension on the trans-axle.. I don't know what it's called, but if you plug your model number into a site like parts tree you can see the parts breakdown of that section of the mower and see the spring. Then where the list of part numbers is, you can see the name of it as well as the part number.

[@randylin9103]

Have you found out the part number of it? I try to get a right spring also!😂

[@randylin9103]

Do you have the part# of the spring?

[@JLPicard440]

Not off hand, but if you take your model number which is on the body somewhere and go to a site like www.partstree.com you can get the parts breakdown and the part number from there... Thanks.

[@homesteadaerial1503]

My John Deere self propelled mower, after it heats up and shut off, it will not start until it completely cools down??? Have any thoughts?

[@JLPicard440]

Could it be a magneto? How long does it run before it shuts off? Usually if it's a carburetor issue, it'll show up sooner rather than later. Do you have a spark checker? You can test the spark while it's in it's shutdown phase. It's best to do this while it's kinda dark, like in a garage if you have one since you can see the neon light better.. They have those at harbor freight for around $5 if you don't have one. Just an idea, not sure if that's that cause..

[@homesteadaerial1503]

@@JLPicard440 The mower will run non stop until I stop it and dump the collection and then it will not start, have replaced spark plug, did open the carb and cleaned out the float, thought the float was not working,

[@JLPicard440]

@@homesteadaerial1503 Is it an auto choke?

[@homesteadaerial1503]

@@JLPicard440 Not auto choke, but I am thinking maybe magneto, but no issue starting usually just one pull.

[@DonLanierPearlProAudio]

have you removed the engine shroud and cleaned out the Mouse Houses

[@neilsimmmons5251]

Should all three idler pulleys move freely

[@JLPicard440]

Yes if the belt has been removed they should..

[@korodski]

Are you related to Taryl?

[@JLPicard440]

Lol... no

[@expert244]

You move to FL?

[@JLPicard440]

Yes..

[@expert244]

@@JLPicard440 Congrats on escaping VA! Virginia is not going in the right direction. Plus, FL has palm trees! ~73

[@JLPicard440]

@@expert244 Lol... Yes there are palm trees.. 🙂

[@SP-wk1en]

I have an AWD Husky. Worst mower I've ever had. I've fixed the drive system probably 4x by various means, including fabricating parts. I keep praying for it to die completely, but alas it has a Honda engine. Maybe I will feed it some nitromethane.

[@JLPicard440]

Arrrgh.. sorry to hear that. I can't say I was in love with this one either... But it is working for now!

[@dontforgettolivealittle5432]

No néed to take the belt drive cover off, nor the backend of the mower

[@JLPicard440]

Ok thanks! I appreciate it.

[@saigyl9149]

for being a high quality brand it sure is poorly designed

[@JLPicard440]

I agree!