How To Program a Key With the AutoKeyProTool CK 100 +

[@karrskars]

amzn.to/3L1RGg0 - Here is the link to the best price I found on the internet

[@georgecarey6995]

Got one of these from China. Came over on the boat. It comes with no instructions but followed this video and programmed a key for my 2007 Honda Accord. I did not have a working key. Bought new one from Amazon. Had to take it to the dealer to get it cut from the VIN. Thanks!

[@allenbraga6159]

Thank you for this. I watched other videos that showed adding key(s) to an existing key. But they had one of the the older models (not the CK-100+). So when I fired mine up, the only two options for the immobilizer were erase all keys and number of keys programmed. I was leery about erasing the working key so I went back to the web and found your video. So I held my breath and erased all of the keys (there were three showing programmed but I only had the 1 working one and the new one to program). Bottom lined, going through the process for 2 keys got them both working. THANK YOU!

[@axemanners6643]

I'm in the same boat as you. Bought car used with only 1 key (a programmed key, not factory original). Do I have to "Erase All Keys"? Or can I just make a 2nd key? Thanks.

[@allenbraga6159]

@@axemanners6643 As I understand it, the menu on the older model AutoKeyPro CK-100 is different than the Ck-100+. I have the plus and the immobilizer menu only had 2 options: Erase All Keys & Number of Programmed Keys. Like I said, I erased the keys and and followed the prompts to program the 2 keys that I had (I working original and 1 new replacement). Both keys now start the car as they should. As a side note, I watched another KZbin video on how to program the remote/FOB on the new one. That now works, too.

[@axemanners6643]

@@allenbraga6159 I think I figured it out. Each transponder can only have 3 keys programmed in its memory. A new car would have 2 programmed. With these 2 keys, you can program a 3rd using the ignition technique of turning it 6-8 times w/o needing this CK-100 computer. But if you bought a used car with only 1 key, then that 2nd one is lost but the Transponder has 2 already programmed so you can program a 3rd. But if someone programmed a 3rd but you only have 1, then you'd have to ERASE ALL KEYS to program 2 keys.

[@axemanners6643]

@@allenbraga6159 My fear is that if I mess up and erase all keys and it doesn't work, I'm screwed since it's my only working key.

[@mediosinformativosdelsuryn6134]

De nakiu

[@jamesmcdonald5718]

Hello will that tell you the pin code on a Chrysler skim? 2001-up?

[@brenthunt5780]

Does this thing program newer cars. 2022?

[@homyvirgile9995]

Hi, It can support 2004 Mitsubishi endeavor key programming. Thanks for answer.

[@msa_0619]

Hello there This unit unlocked GMC Chevy Trailblazer Lt radio 📻 or not. B4 I pay this unit from Amazon or E-Bay website? I'm calling from Houston TX

[@josecfish5297]

Karrs Kars what are the tokens for? do you have a unlimited use? Is there a ongoing cost with this tool?

[@karrskars]

You have pretty much unlimited use for the tokens. I mean I think there are 1000 and each program is a token. So it will take awhile to use them all

[@johnhall3827]

Some one with my mind set you have the tools to do the job . So it will work out cheaper and quicker in the future .

[@LTFT83]

does it support 2009 Corolla in USA.. dealer wants 250 for a damn chip key. I don't even have power door locks.. etc

[@jdstewart9689]

I am a small auto repair shop..I have seen the reviews in this...and have ordered one..

[@benl4707]

So did you pick 1 up?

[@vanacaernooodrsnenganarach5716]

Hi where could i find the car list to know which cars works olso if find pin of hyundai santa fe 2.7 v6 2009 and dodge dakota 3.7 v6 2010 4x4 slt thanks million for answer ..

[@josecarbajal2734]

Thank you so much so easy saved so much 💰💰💰

[@mediosinformativosdelsuryn6134]

Tu avaro

[@clbamazing]

Will this work on my 05 Honda Accord ?

[@JeffSmith03]

Confused about whether this can make my key fob buttons work? Bought 2004 accord but the key only starts it, all buttons ignored

[@billymcclanahan1794]

i got mine in the mail, picked saab usa did what it says, now it says ecu disconnected, when i first plugged it up it acted like it was losing connection , now what do i do?

[@M.ruiz902]

would this work on a 2004 nissan maxima. It has a 4 digit code. Could it retrieve it?

[@yamaharider7672]

Will this work on a 2008 ford Taurus? I can't find a list of vehicles

[@quentellispittman5157]

I have a 2004 ford explorer sport trac xlt and a 2006 ford freestyle will it work for them I bought blank keys and I'm trying to figure out will this help me. If you could possibly check for me would be very helpful and thanks

[@justinturner3264]

I have a 2012 Ram 1500. Its new enough it doesn't have the metal key shank. Will this still work?

[@Elisha_Man_Of_God]

Is it compatible on Asian Cars? I'm from the Philippines and i would like to buy it. Please reply

[@xxenergyelecxx1977]

It should be. Most cars are. Good luck to you 🍀

[@hartfordrodz7222]

Is the smart car for two on the list of cars great video

[@karrskars]

Let me check in the morning and I’ll let you know. Thanks!

[@fretman09]

Can you please help me out i need pin or token for 07 charger, i have the same unit and my ecm is not communicating when i want to program new key. Thank you.

[@ArnAriel13]

Did you try calling the dealership? For Jeep they were able to give me my VIN specific pin as part of my key purchase.

[@thiswopcancook2257]

Will this work on a 2015 Mazda MX5 Sport

[@s.d819]

Hello , question ; so if lost keys do I need to replace the ignition ? Can I purchase the key , have it ✂️, and program? Or do i have to change out the ignition as well?

[@mediosinformativosdelsuryn6134]

No sepo

[@AdrianThane]

Will reset smart key function on a Prius 2006? My master circuit board is fried

[@sebastianavalos4222]

Will this work for a 2011 lincoln navigator add a key

[@clbamazing]

What kind of car was that ?

[@PopovskiDarko]

I bought a Nissan Titan 2004 with only one original key and remote , so from my understanding I can buy a blank key with transponder and have it cut and than I can program that new key with this tool , correct ? Also will that new key match the original key or will I have to reprogram the original key as well ? Thanks !

[@karrskars]

You can just reprogram the new key not the original one although you can do that too.

[@onielakajaro4472]

Like your video and easy ?Can it program honda fit as well

[@axemanners6643]

1:09 Why do you have to ERASE all keys? What if I have a working key? Can I just program a 2nd key? Erasing would mean that my working key would no longer work, right? Thanks.

[@karrskars]

You can. I used it to do just that today.

[@1mJustCurious]

How do you program multiple keys? Each time I try to program an additional key and it erases the previous key programmed and it won't work after the second key is programmed.

[@incapachacutec6229]

that is a good question I hope somebody out there answer to this question idont want to erase my original key when programming the new key!!

[@underourrock]

In the video he puts in 1 for the key number. That is the first key in the car memory. If you repeat the process and you put key 1, then you will replace key 1. You need to put 2 for the second key, 3 for the 3rd key... Different numbers each time.

[@druggiero111770]

If I already have an original key and wish to use this programmer to program additional keys. Which I've done, just can't start car. I have purchased purchased the ck-100. I am hesitant in the menu selection, do I select "erase all keys" or "number of keys in mem"? seeing I already have one original key that is programed to start the car. I don't want to risk loosing that keys memory by selecting the wrong menu item...

[@karrskars]

You can replace all keys and it will still work. There is a way to program additional keys without erasing. I’ll have to look though. What is your year make and model?

[@1mJustCurious]

Hi Denise, I am in the same boat as you are. I replaced my 2006 Honda Odyssey ignition key cylinder assembly and it came with three keys. I can only program 1 key and it is rendered unusable after I program an additional key because it is erased. What have you found about programming additional keys?

[@jdstewart9689]

excellent video...do more my friend...

[@gregorypiercesr.794]

will this program a 2010 ford ranger

[@noors3550]

Hi. Does it work for card key too?

[@김환호-l6x]

I got the device back in 2018 and added 1 key for my 2009 honda crv. Recently (June 2020), I tried to add a new cut key from a dealer and it will not add. I checked the Number of Keys in Memory and it says "6." I only added 1 key back in 2018 and not sure why it is saying "6 keys" in the memory. Do I need to erase all the keys and re-program (which I am bit scared to do) or is there another way to add a new key?

[@karrskars]

Probably need to erase them and add them. I’ve never had a problem doing that and I’ve done at least 50. But do at your own risk

[@김환호-l6x]

@@karrskars Because for some reason, it reached max number of keys, the only way is to erase the key that works and reprogram both keys? Once the max number of keys in the memory is reached, there are no method to erase number of keys from the memory?

[@karrskars]

Well worst case scenario go to the dealership and do the keys in the parking lot. If something happens then you don’t have to pay for a tow.

[@benl4707]

So did you try it?

[@xJeqzer]

Does this work if you have lost the key... I have a Ford F-150 2012 with no key Please help

[@karrskars]

You’ll have to get a key made at the dealer. Tell them to make a valet key. It’s a chipped key that’s not programmed. Bring your title and they’ll do it. Then use the programmer to program that key to the truck.

[@xJeqzer]

Ok but the key won’t work right because the chip is not programmed correct???

[@odinslockllc]

@@xJeqzer Correct. The dealer will make a key that will fit in the lock and turn the lock but it won’t allow you to start the vehicle until you program the key. The dealer can also program it but they may cost more than you doing it yourself with this tool.

[@gsrjaycee4521]

If I swap out my ecu with and identical one could I program the key to the new ecu immobilizer with this tool ?because I shorted my old ecu.I do have the original key.

[@Zeltroix]

I've been trying to program my old keys to new ecu but it just won't allow it, did you ever figure that out. Do I need brand new keys that are unprogrammed?

[@jimvitale4963]

Exact thing happened to me , Will it work ? my ecu got wet and I got same one with same numbers used , made appt at dealer next week . I have the tool key is flashing and im afraid to delete origional key

[@gsrjaycee4521]

@@jimvitale4963 It's more than likely to work but the dealer might charge a pretty penny.

[@Zeltroix]

@@jimvitale4963 I have this tool but it wouldn't work on my 2002 civic because the vin did not match up, had to pay a locksmith to program the vin to match on the new ECU and then this tool ck100 would let me reprogram keys.

[@jimvitale4963]

Didnt work, unsucessful . towing to dealer .

[@viesto504]

What version software? 99.99 or 46.xx?

[@ultramanxk7]

👍

[@digitaletc9971]

Will this work with a 2018 Accord?

[@karrskars]

Yes it should

[@ImKingPhilly]

Does it work for Infiniti

[@weizman123]

Does anyone know how to use the RFID function on it ?

[@sanjeevverma9395]

Is the tool updatable, and I see it comes with a adapter to plug into wall... what is that for? I thought it would just plug into obd2 port. thanks

[@randyhoekema7695]

Can I get key cut code with this too?

[@BigTroyT]

In normal practice, you do not need the adapter - the car will power the programmer. The adapter is essentially only for testing. According to the included instructions, the programmer is NOT user-updatable, but that doesn't likely matter as newer vehicles use newer systems that this programmer doesn't support anyway. It looks like this *generally* works on most cars in the 2000-2011-ish range, including some models released in 2010 or 2011 that continued a few more years, so perhaps 2015 for a few models. Newer cars aren't supported and won't be with this tool.

[@mediosinformativosdelsuryn6134]

@@randyhoekema7695 🤣🤣🤣😡🐒🐒👏

[@caesarjacinto6474]

iM JUST Trying to program an extra key ...its telling me to erased all keys do i proceed?

[@cmsense8193]

Im guessing you should. When you program a key it’s assumed you lost the others. It must be a security thing.

[@ZenithClarity]

Will this work on a 2005 Dodge Magnum.

[@karrskars]

Yes it will

[@ldubdj]

Can this program remote fobs that lock/unlock the doors? Is that #2 Remote Controls on the Main Menu?

[@karrskars]

Yes it can

[@swankyboy88]

please help me how to update the database ? i bought mine with highest model ( 2010 )

[@angelodesantis7749]

Working for Renault cars?

[@Gabriel-lp4fu]

Does it work on 96 Ford mustang gt chipped key?

[@karrskars]

Check this video, it shows most of the vehicles it covers. kzbin.info/www/bejne/bHOuhpJubKl2frc

[@luistchavez2657]

Tanks.you.got.it

[@umarkhan-ze8qf]

How do enter letters with CK -100+. I try holding the button but only enters the number. I need it for key pin please help.

[@karrskars]

Not sure I tried doing that too yesterday and couldn’t figure it out but I didn’t really try that long.

[@demariowilson934]

Did u ever find out

[@demariowilson934]

@@karrskars huh

[@Tootoojackson]

How to change the numbers to letters i try holding the button down doesn't work when trying to put the pin code in

[@demariowilson934]

Did u ever find out

[@Tootoojackson]

@@demariowilson934 no I never figured it out I put it in my closet and order a expensive scan tool that let me program keys to any car I want $500 plus get u a good scan tool nobody got time for this cheap thing it's a waste of money

[@yourfilipinololo1969]

Can this work for a 2004 Lincoln Navigator?

[@karrskars]

Yes it can

[@keenanmoore4163]

What does (can) mean on the immobilizer meanu??? I have one too?

[@karrskars]

Canada? Where exactly are you talking?

[@keenanmoore4163]

@@karrskars on the list of vehicles.

[@sebastianavalos4222]

Hi can this add a key for dodge caravan 2004

[@javierpnd3625]

Can I make to one bmw x5 2004 ?

[@gurdipsingh9789]

Would thiswork with honda accord euro cu2 Australia. In Usa its called acura tsx cu2

[@karrskars]

Yes it should

[@junkyardvette613]

will it work on a 2001 honda accord

[@karrskars]

Yes

[@alexmazurek18]

2002 Honda Accord ECU not found. Battery charging, device plugged in. Tired multiple years and both USA and International. What gives?

[@karrskars]

Could be an issue with your port on your car. Maybe check your fuses.

[@JosueLopez-hp7oi]

Did you found out what it was? Having same issue

[@alexmazurek18]

Pretty sure ai ended up completely replacing my ECU

[@nelsonjagualing7836]

Sir how to update CK-100+?

[@JosueLopez-hp7oi]

Any help with error code ecu not found?

[@wwolf771177]

Did YOU figure it out?

[@JosueLopez-hp7oi]

@@wwolf771177 I did not, eventually called an auto lock smith and he bypassed it for me

[@saminj]

Can it program a remote fob as well?

[@karrskars]

Yes it can!

[@saminj]

@@karrskars thanks

[@nuevetre93]

I can't program my key because my obd2 port is not working. Someone can help me please thanks

[@rehlers1]

Check the fuse

[@ricgomez1]

Cigarette lighter fuse

[@robrohling538]

Where did you purchase the programmer?

[@karrskars]

I linked the programmer in the description. Check it out

[@NGUYETNGUYEN-hu6oq]

do this work on mercedes 2012

[@felixaripa6482]

2009 mitsubishi eclipse gt?

[@lester4752]

How to copy a key with attached a remote

[@eustacesamson3877]

Do it works with 2018Ford F-150?

[@karrskars]

It should

[@ray50772]

My is asking for pin jeep wrangler

[@luistchavez2657]

Muy.bueno.el.ejemplo

[@michaeltrepanier2761]

What the heck are all those clicking sounds in the background?

[@frankmata1812]

This tool sucks,It says you need the pin key codes from the dealership in order to program a key.

[@karrskars]

Yes it does that with some vehicles.

[@wabbit_adventures]

What vehicle were you trying to use??