Stealth Soft Wash Proportioner Product Demonstration

In this video we demonstrate the Stealth Soft Wash Porportioner.
We go over how to plumb/set up the system and what different mix ratios we can achieve when adjusting the knobs.
Item can be found here: www.jnequipmen...
mix chart: www.jnequipmen...

[@wasabi167]

This is the first video I searched for on a Proportioner to get a better understanding and now I can see how they set this up on their trucks and trailers and you have just made this very plain and clear how it works. Thank you for making this video, it was an excellent demonstration!!!

[@tritonpressurewashing]

Same, I’m looking for 2 days for a video like this one, seems plastic pipes/PPR/polyurethane or propylene like the ones from our houses, shouldn’t be more than 50£ to make one but some videos are telling somewhere at around 200£ which is way to expensive for few normal connections from hardware store

[@Bradhutton123]

That is a fact. I too have watched a lot

[@05tech]

Great video, putting in the coloring to show us beginners what’s what. thanks for the visual and it helped that you put the key chart to show how to mix each one. Awesome brother.

[@martinmorales-rios9044]

This is the video that I was looking for 💪🏾 thanks a lot.

[@davidbickford2790]

Excellent visual to help you see the theory of the system actually working.

[@matthewperry5712]

Very informative and helpful to us newbs. I appreciate you.

[@Spraywell]

Glad we could help.

[@johnpaul-mp7zc]

Your web site links won't open

[@h2ohomeimprovements227]

Thanks for sharing. Just bought the system and arrived today. Cant wait to test it this spring

[@rmass68]

I can’t seem to load your website. Is it still available?

[@nicholashalvis5376]

I was told all the lines coming from the bottom of the proportioner have to be the same length is that true?

[@vladius8521]

basically using proportioner in downstream fashion?

[@nicholashalvis5376]

How about doing a video where you install a three-way valve in your surfactant line as well as your SH line.

[@vspd303]

Great video. Well explained

[@vladius8521]

mix chart link does not bring up the chart it brings up a website to make me search everywhere for it. can you fix that please and ty

[@Alaska24801]

If I use soap like laundry detergent for my surfactant. Do I need to dilute the laundry detergent thank you

[@chriscox5166]

Good video on explaining the proportioner.

[@artbentley4887]

Can you hook up the water line from the house to the proportioner if you don’t have a water tank??.

[@josephjohnson2114]

Do you think if I put that bleach dial at 1 and water all the way on I’ll get a2% mix ?

[@alexcastro4595]

The black box. Is that just your standard 12v bleach pump.

[@rideordie1583]

What size is the yellow line

[@vladius8521]

can you run the water line to pump from pump to proportioner then to gun? or will it not work well without being on pump draw side-object is to prevent bleach etc from going thru the pump?

[@HouseWashingRick]

Where can I buy that gun you have I want one

[@pressurewashingandhoodcleaning]

where did you get your parts from?

[@newwavepressure6478]

Can i put on of these on the soft wash sys u guys sell the mavric or somthing??

[@artbentley4887]

Also, could you build one with just two valves, one for say a batch mix and the other line for surfactant???

[@SonicServicesLlc]

Hello, I looked for this item in your website but cant find this manifold with those valves. Is it special order?

[@Spraywell]

HI Joe, we no longer offer this product, as shown. However, you could purchase the individual items and re-create it. Here are the quantities and links to the item you would need: qty 2 - Banjo HB050 Hose Barb 1/2" MNPT x 1/2" - Spraywell qty 6 - Banjo NIP050-SH Nipple 1/2" MNPT x 1/2" MNPT - Spraywell qty 2 - Banjo SL050-90 Street Elbow, 1/2" x 1/2" - Spraywell qty 1 - Banjo CR050 1/2" Poly Cross - Spraywell qty 3 - 1/2" Chemical Metering Valve - Spraywell qty 3 - Polypropylene Check Valve with Hastelloy Spring, 1/2" F x 1/2" F (spraywell.com) qty 1 - Banjo HB050-038 Hose Barb 1/2" MNPT x 3/8" - Spraywell qty 1 - Banjo HB050-90 Hose Barb Elbow 1/2" MNPT x 1/2" - Spraywell qty 1 - Blue Monster 1/2" Blue Contractor Grade PTFE Thread Tape - Spraywell

[@HouseWashingRick]

will 1/2 inch hose work on sh and water ports and 3/8 on soap port

[@TroyStevensStelzerPaintingInc]

@JN Equipment You suggest using 1/2" over 3/8" for more than 4 GPM (which I fully agree), yet on your website it shows you build those with 3/8" barbs. Why? Help me understand why you'd go out of your way to put in bold type how important it was to use at least 1/2" hose, meanwhile, you're building and selling these with undersized barbs?

[@Spraywell]

Great question. The SPRAY hose is a 1/2 inch, the reason for this is 1. volume of material at the tip and 2. reduced backpressure in the line. But keep in mind that's the 200ft spray hose. What we are discussing here is the suction end of the hose. On the proportioner, we've divided the suction hose between 3 hoses: 2 - 3/8 hoses and 1 - 1/4 hose. which creates a total of 1 INCH ID of suction hose when they are all used together. If you are only using the Water and SH lines, you still have a 3/4 inch suction hose.

[@TroyStevensStelzerPaintingInc]

​@@Spraywell I agree with part of your statement, however, if you're only using water, you'll be pulling from an orifice smaller than the pump inlet, which is the biggest cardinal sin for these pumps. There's advocates out there who swear you need twice the diameter of suction as your pumps inlet, which I think is way overkill, but absolutely nobody would agree that it's ok to use anything smaller that the actual pump inlet.

[@mattmayo937]

@@TroyStevensStelzerPaintingInc and @JN Equipment so what was the end result to this? The manifold outlet hose going to the pump should be what size? And the inlet hose for water and SH should be what... 1/2? and then surfactant at 1/4? (Some say 1/8" on suf... ) What are your thoughts? Oh yeah.. and the hose size leaving the pump to the reel? What size hose on the reel for a 5.5GPM pump?

[@liquidusgaming6021]

Excuse me, what does it mean when you open all 3 valves and your pump isn’t sucking all 3 lines but if you close one valve or sucks the other 2 lines I can’t get my proportioner to suck 3 lines anymore I’ve only used it for 1 month did a few roof cleanings and it’s not working right. Is it maybe from not flushing the surfactant out of the valve? But I can shoot a water hose through it and all 3 valves water comes out the other end but when I hook it to the pump my proportioner isn’t working right. What is the problem? I also been using half inch hose for bleach and water and 1/4 for surfactant.

[@pressurewashingandhoodcleaning]

how much is the manifold

[@frankramirez5062]

Thanks that help alot

[@crave_thrax5140]

What soap do you prefer on vinyl siding homes with a soft wash system?

[@TopMotivationalspeaker2025]

How do I know if I’m getting 1% bleach for a standard Vinyl house siding job?

[@mattjulius4382]

Can you do a video of your spray gun.?? Like I know it’s a Suttner but I need the rest of the attachments on the front end please??!!

[@Spraywell]

Hey Matt, if you have a specific question you can always call us at 561-964-3228

[@DRUMSRIO]

Do you the link to purchase ?

[@HouseWashingRick]

I just bought the Gen 2 with 55 gallon tank. can i use this on my Gen 2

[@Spraywell]

you can use this on any diaphragm 5.5 GPM or above

[@HouseWashingRick]

Thank you for getting back to me. I went a head a bought one from you guys and I love it. It works great. Washing houses here in Cookeville Tennessee

[@HouseWashingRick]

If I wanted to upgrade pumps on gen 2 and go with 7.5 gpm can I do that and can I buy the pumps from you guys

[@Spraywell]

@@HouseWashingRick yes, you can upgrade to the 7 GPM by simply changing the pump, no other changes required if you have a 5.5 gpm set up

[@HouseWashingRick]

@@Spraywell ok ty

[@Truprosoftwash]

Great info!! Could you recommend hose sizes for mixer?

[@Spraywell]

I use 3/8" lines for Water & SH and a 1/8" for my surfactant.

[@Truprosoftwash]

JN Equipment cool thanks!! Is there a purchase minimal on your site for ordering? I like that 1/2 to 1/4 reducer

[@Spraywell]

@@Truprosoftwash there is a $35 order minimum on the website.

[@Mr_mrs_arana]

Where can I purchase the cartridge screen filter a that you have in the 5 gallon bucket? I can’t seem to find them🥵

[@TheFreshRinse]

Can I use larger diameter hoses on each line?

[@Spraywell]

yes, but I would suggest the center line is a smaller ID

[@HouseWashingRick]

Mike what size hoses did you use. I'm pulling off of a 5gpm pump

[@TheFreshRinse]

@@HouseWashingRick 3/4. If my memory serves me right. I may be wrong brother.

[@HouseWashingRick]

@@TheFreshRinse ok thanks. I got my proportioner today I understand my hose for sh. water and soap im not sure where to connect the single port on portion to pump

[@TheFreshRinse]

@@HouseWashingRick Does the video not help you? I’m not sure if it shows or not. Should be just one outlet on the pump.

[@hogswaggthejoka4346]

Why put a control valve on water line can you go check valve alone since water is always 100% open

[@SamNguyenV]

You can’t do that, it won’t mix evenly to ratio. I’ve tried already.

[@Igor-q3f]

The surfactant is about 1oz per gallo of bleach. Can you figure it out on that dial?

[@Spraywell]

for that small amount I would recommend mixing your soap with water into a bucket and drawing directly out of that pre diluted mix. that EXACT of a mix is tough for this version for the standard proportioner. For super specific mix quantities like 1 oz per gallon, you could use the ELITE proportioner which is more exact with the mix quantities.

[@havefaithpressurewashingse7272]

I purchased one of those I have a question ? How do you prime the stealth metering valve after installing it up ? Mines is not working, can you give me any of suggestions for why I’m not able to pull water

[@Spraywell]

email or call me so I can walk you through it: [e-mail] or 561-964-3228

[@Beluel]

Can you please send me a link with the chart ?. Thank you

[@Spraywell]

www.jnequipment.com/wp-content/uploads/2020/02/JN-proportioner-mix-ratio-chart.jpg

[@Beluel]

@@Spraywell THANK YOU

[@michaelmunger7688]

Where did you get the hardware from? Or do you have it?

[@havefaithpressurewashingse7272]

I purchased one of those a week ago, I hooked it up the same way but I’m not pulling anything threw the metering system. I have a 7gpm pump , just not pulling anything out my bucket at all. You have any idea what could be the issue

[@REXONATER70]

Your check valve must be backwards.

[@muratuzer6772]

What diameter hoses would you recommend to use in combination with a 7 GPM pump?

[@Spraywell]

for the proportioner or your spray end? For your spray hose I would recommend 1/2 inch or 5/8, For the proportioner I like to use two 1/2 inch suctions lines for water and SH, and a 1/4 inch line for my soap

[@muratuzer6772]

JN Equipment Isn’t 1/2 inch suction line for water and SH too small for a 7 GPM pump? I do use a 5/8 inch hose as a spray hose. Just asking, I’m still fairly new to 12V systems. Thank you in advance!

[@Spraywell]

@@muratuzer6772 are you using a proportioner (3 separate suctions lines) or not (only 1 suction line)? If you only have 1 suction line than use 3/4 or larger.

[@muratuzer6772]

JN Equipment Yes, I am using exactly the same proportioner (got it from you guys actually). I have replaced the barbed fittings to where I am using 3/4 inch hoses for water/SH (from the tank to the proportioner) and 3/4 inch hose from the proportioner to the pump. I do use a 5/8 inch spray hose (200 feet). It does not seem like I am getting the pressure I should.

[@davesteffler6524]

I bought a 4.0 gpm stealth softwash system off of you last year your website says that I need a 5.5 gpm or greater to use this propotioner is that correct. I should upgrade?

[@Spraywell]

The 4 GPM doesn't have enough "pull" to draw from all 3 lines. You could use this propotioner on a 4 GPM system but I would recommend either plug the center soap line or always keep the center knob turned to 0 (closed) and only use WATER/SH knobs. If you wanted to upgrade and currently had a Stealth PRO 4 GPM Soft Wash system then you would need a larger pump (either 5.5 or 7) AND (VERY IMPORTANT) upgrade ALL your 3/8 hose with 1/2 hose. 5 GPM and 7 GPM pumps need AT LEAST a 1/2 hose and the 3/8 hose that your Stealth PRO 4 GPM system came with will cause issues.

[@TroyStevensStelzerPaintingInc]

@@Spraywell You suggest using 1/2" over 3/8" for more than 4 GPM (which I fully agree), yet on your website it shows you build those with 3/8" barbs. Why? Help me understand why you'd go out of your way to put in bold type how important it was to use at least 1/2" hose, meanwhile, you're building and selling these with undersized barbs?

[@deanweingarth9586]

What if I want it to be upside down. So the single port is on the bottom and the 3 ports are up top? Do I swap the order of the check valves and meter valves?

[@Spraywell]

no just install it however you want it, no need to change anything. It can be installed in either orientation.

[@deanweingarth9586]

@@Spraywell yeah, I thought about it after I asked you the question and duh, the valves are already in the only direction they can be. In my mind I was thinking of the meter marks being upside down as well. And theres really nothing that can be done to change that. Too bad pentair doesn't make the marks in 2 different directions so can purchase the direction we want. Oh well.

[@nick32141]

So that your not loosing prime dose all your lines always need to be left in liquids in each drum?

[@Spraywell]

Yes that is best practice, EVEN if the valve is completely closed, the line should be submerged.

[@nick32141]

@@Spraywell So that means each line must be either submerged in surfactant water or SH. The SH means you must always carry SH in your tank isn’t that a bad thing to be doing carry SH always in your tank and keeping your line submerged in SH? What about filling when you’re done your SH tank with water and running it so that you’re flushing out your SH line?

[@Spraywell]

@@nick32141 you can always empty you tanks, you would just have to reprime your system.

[@eknight101]

0:49 was that a fish swimming in that surfactant?

[@Spraywell]

lol, you made me do a double take! that's a black inlet strainer attached at the end of the clear suction tube.

[@TheSwordofTruth]

ha, I thought the same thing at first.

[@Wuploads]

Hello Friend, I have the same type of valve in my soft wash equipment with the three-valve manifold, but I have noticed that when I stop using it, if I do not close the valves, the water from the tank goes to the chemical tank. You have any idea what it might be. Greetings from Miami fl

[@xtremepowerwashing1815]

Might be bad check valves..

[@Jarmal87.]

I went on the website and I was looking for that setup. What is the total price for the stealth soft wash set up with the proportioner?

[@Spraywell]

just added: 5.5 GPM Unit: www.jnequipment.com/shop/contractor-equipment-accessories/soft-wash-equipment/complete-soft-wash-units/stealth-pro-5-5-gpm-soft-wash-roof-cleaning-system/ 7.0 GPM Unit: www.jnequipment.com/shop/contractor-equipment-accessories/soft-wash-equipment/complete-soft-wash-units/stealth-pro-7-gpm-soft-wash-roof-cleaning-system/

[@coachnate5747]

I can only assume you guys charge 500-600$ like other sites. Better to buy all the parts for roughly 250$ and put it together yourself, this way you know the equipment your using and know how to fix/ replace parts

[@b3owu1f]

Guess they out of business? Link doesnt work.

[@sethmisaelhernandez5902]

Called Spraywell now

[@hectorgarcia-kh5xr]

How many gallons tank capacity need for each line?

[@BadWeatherfreak]

It doesnt need clamping hose for the hoses?

[@Spraywell]

I would recommend stainless steel hose clamps everywhere.

[@BadWeatherfreak]

I mounted everything yesterday and the pump is not working properly. It seems like is not pulling enough chemicals.

[@Spraywell]

@@BadWeatherfreak did you get this resolved

[@shanedupre2644]

@@Spraywell I am waiting on the 5.5 GPM pump to come in but went ahead and set this all up in my trailer last weekend on a 4.5 GPM pump. it really would not pull from all 3 hoses. I am assuming the bigger pump will make all the difference?

[@Civilian_Actual]

I have a few product questions, what’s the best way to communicate?

[@Spraywell]

[e-mail]

[@RayEvangelista70]

If you had 12.5-15% SH 50 / 50 would be about 6.25% to 7.5% SH. Do you need to go that hot in FL? I am in NJ and we clean roofs with 3.5%-4% most of the time.

[@REXONATER70]

Bro I run Chem and water 50/50. Yes Florida needs it to be strong. It could be less but I got to burn that mold off. And it doesent kill plants as long as you rinse and cover.

[@artbentley4887]

How would you set this for washing vinyl siding at around 1.5/ 2% mix?

[@RayEvangelista70]

That sounds hot for siding, unless the house is supper green.

[@577buttfan]

@@artbentley4887 2% is way too hot for siding imo.

[@Papajosh517]

Does the braided pvc hose work ok or do you recommend non collapsible for the suction lines?

[@Spraywell]

braided line has worked for us so far, no complaints

[@Parkerhiggs]

you da man

[@reyesbedolla9513]

Hi I like to know that price please

[@johne.meyerconstructionser7507]

id like the link fixed to take you right to the product not the page to make you go looking. please and thank you

[@Spraywell]

Hey John, we no longer sell this product. If'd like to know how to recreate it with the individual items, I'm happy to list them for you.

[@benderprofessionalservices9018]

Does anyone rinse a house using soft wash system after washing it or just a garden hose. Tku

[@Johnnyreengo]

Water is either on or off, why do you need a metering valve for it

[@dustywelker4054]

Do you use this proportioner with a downstream system?

[@Spraywell]

used with a soft wash system

[@benderprofessionalservices9018]

How much to buy that

[@Spraywell]

$299.99 www.jnequipment.com/shop/brands/stealth/stealth-soft-wash-proportioner-system/

[@ep-extraordinaire9679]

🤘

[@Abovenbeyondservices]

Oh Tim is gonna be getting a fat check from you all!!!

[@Spraywell]

I don't know who Tim is, but let me know that goes for him!

[@yoppabang5669]

Bruh ur voice sound exactly like mike maljak from logan pauls podcast 😂😂

[@aaaricmondroofing1703]

What about the fish 🐠 whaaaaaat

[@TheSwordofTruth]

hahahahahahahaha

[@Crypto_Junkyard_Miner]

A fish in the bucket

[@TheSwordofTruth]

haha I thought the same. it's not however.

[@softwashscience]

Its a control valve system not a proportioner.

[@nachomoma2469]

Does florida not have coin pushers? What the hales people...what the hales lol

[@fullblownredneck9623]

I spy air leaks.

[@Bradhutton123]

Dude your a pimp. So much better explanation