Machining an 1890's Miniature Drill Press ---The Knee --- Part 2

  Рет қаралды 33,285

Joe Pie

Joe Pie

Күн бұрын

Пікірлер: 280
@TurbineTed
@TurbineTed 3 жыл бұрын
Hi Joe, I built the complete series of these kits about 10 years ago, beautiful things, my favourite is the shaper. I guess your next challenge is the top frame, took me ages to figure out how to fixture it so that you can get at all sides. It will be interesting to see your solution. Best of luck from jolly old England. By the way I did make a second worm left handed.
@joepie221
@joepie221 3 жыл бұрын
I'll have to make a LH worm. The RH is just un-natural.
@farmalltomf
@farmalltomf 3 жыл бұрын
Joe, I continue to enjoy your detail on "order of operation" coverage in your videos. While most of this is standard machining, the size scale presents a challenge and you cover it beautifully! Well played my friend!
@joepie221
@joepie221 3 жыл бұрын
Thanks. I look a part over thoroughly before I start it.
@aceball8
@aceball8 3 жыл бұрын
Joe, you're such a small minded machinist. Damn nice work- makes the rest of us look rookie. Thanks for sharing your vast knowledge.
@joepie221
@joepie221 3 жыл бұрын
We are all rookies at one time or another. Patience and pride moves you forward.
@johnkowalchuk1028
@johnkowalchuk1028 3 жыл бұрын
I just know you went back to the lathe and turned a left hand worm gear. :-)
@Pest789
@Pest789 3 жыл бұрын
I have absolutely no doubt
@joebuckley9940
@joebuckley9940 3 жыл бұрын
I suspsct it as well
@norton750cc
@norton750cc 3 жыл бұрын
I have used full size versions of this type and age of drill press near 50 years ago, the drive pulleys were converted to v belts with the matching pulleys on an ac motor. The knee always elevated by a clockwise crank. They used shim packs to eliminate backlash and end float left by machining tolerances. The work that these machines did was awesome. But it required that secret ingredient to achieve great results.....SKILL. There are many such machines still working in eastern countries, but not to the standard they were made for, due to lack of maintenance. Britain exported thousands of old machine tools in the 60`s as scrap metal. I still keep my centre lathe and manual mill in my shop. Any walk in jobs are done on them. My other work is done on Haas TL1 and mini mill. Every tool has its purpose. Nice video!
@joepie221
@joepie221 3 жыл бұрын
Agreed.
@tylervanorman492
@tylervanorman492 3 жыл бұрын
9:48 I love when Joe gives them a warning before an education.
@joepie221
@joepie221 3 жыл бұрын
Having spent time on the other side of released products, I can admit its sometimes hard, if not impossible, to make even the slightest changes to a product. A text warning or suggestion in the manual or instructions is much easier.
@tylervanorman492
@tylervanorman492 3 жыл бұрын
@@joepie221 Agreed
@frijoli9579
@frijoli9579 3 жыл бұрын
This is my favorite build so far.
@joepie221
@joepie221 3 жыл бұрын
I think the lathe has my vote, but I'll have to wait and see when they are all done.
@mp6756
@mp6756 3 жыл бұрын
Nicely done I like the fact that you made the left hand spiral for an accurate representation of a real drill press.
@joepie221
@joepie221 3 жыл бұрын
I didn't, but I will.
@g.tucker8682
@g.tucker8682 3 жыл бұрын
Thanks for the insights, Joe. That fixturing solution for the table is great! It looks simple after you've shown it, but I doubt I ever would have figured it out on my own. I have a bone to pick with PMR - it's great that they're helping to keep this hobby alive with their kits, but they are lowering standards by specifying the use of slotted screws where hex or square head bolts would have been used on the real machine. And they'd save themselves some money by including a piece of hex bar instead of the slotted screws. It takes less than an hour to bang out more than enough scale hex cap screws. And they're far easier to install with a nutdriver than fiddling with a tiny screwdriver. If you don't have a small enough nutdriver you can make one from an Allen setscrew. I used to enter model contests back in the day (waay back) and a shortcut like this would take a model out of the running, or even disqualify it. Just my two cents worth of advice for anyone making these kits - certainly everyone will invest their efforts as they see fit. Happy Turkey everybody! I gotta start roasting some vegetables.…
@tjh44961
@tjh44961 3 жыл бұрын
I bought my first kit from PMR over 20 years ago, and they have always been like that. I think a reason may be (not THE reason) that there is a certain group of amateur machinists that are deathly afraid of any fastener smaller than 4-40. So, maybe if they give you the screws, it lessens the fear of working with them. I had a friend that called anything smaller than 4-40 watchmaking, and he'd always say "I don't do watchmaking." I've never had a problem with it, and I have to say I've been very lucky. I've only broken two taps in my life, one a 1/4-20, and one a 2-56, coincidentally in the main frame of PMR's #5 vertical steam engine. Luckily, it broke off a little proud of the surface around it, and I was able to grab it with needlenose pliers and work it out of the hole.
@joepie221
@joepie221 3 жыл бұрын
The threads on an 0-80 tap are almost impossible to see. Just as easy to break. Being afraid is perfectly OK. I think square head hardware would look good, but not everyone has drivers that small. Slotted is just faster and probably a sure thing to install.
@deemstyle
@deemstyle 3 жыл бұрын
Fantastic video as always. Friendly reminder that so many of us would LOVE to buy one of your mini fixture plate systems you used in this video!
@joepie221
@joepie221 3 жыл бұрын
I do plan to make and sell them.
@bradyoung6663
@bradyoung6663 3 жыл бұрын
Looking really good. The brass wheel you made to replace the bad casting adds some great contrast.
@rexmyers991
@rexmyers991 3 жыл бұрын
WOW! I continue to be so impressed with how your mind works. I see YEARS of experience showing thru. I’m 78 and only started acquiring machining experience a couple of years ago. If I can get ten percent as good as you I can take some pride.
@joepie221
@joepie221 3 жыл бұрын
thats quite a compliment. Thank you. This trade is all I've ever done. I think I'll stick with it.
@glendaleclassiccarwashiish4727
@glendaleclassiccarwashiish4727 3 жыл бұрын
ALWAYS A plus. Happy Thanksgiving.
@HM-fn2xe
@HM-fn2xe 3 жыл бұрын
Another video full of useful tips…well done.
@jean-francoi4083
@jean-francoi4083 3 жыл бұрын
Another jewel.
@joepie221
@joepie221 3 жыл бұрын
Thank you. Each of these kits have great potential.
@roberthiggins1142
@roberthiggins1142 3 жыл бұрын
That mini drill press is coming along very nicely & i do love your little Shop tips as well as the little fixes that you have made to this series.
@joepie221
@joepie221 3 жыл бұрын
Beside the parts I'm doing, this mini machine series is rich with technique, sequence logic and holding demonstrations that can be applied to basically anything. Thanks for watching.
@ChrisB257
@ChrisB257 3 жыл бұрын
More super work Joe, plus some great set-up approaches and nice precision. At my age now, these tiny components would probably drive me nuts! Coming along beautifully - more for the growing Joe Pie miniature workshop display :) Happy turkey day to you and yours Joe :)
@joepie221
@joepie221 3 жыл бұрын
I wish my eyes were as sharp as they were when I was 18. This stuff would be much easier. I hope you had a good Turkey day as well.
@johnantliff
@johnantliff 3 жыл бұрын
Another exceptional and educational video from the Master. Thanks.
@joepie221
@joepie221 3 жыл бұрын
Glad you enjoyed it!
@Engineerd3d
@Engineerd3d 3 жыл бұрын
Lovely work as always Joe!
@danneumann3274
@danneumann3274 3 жыл бұрын
when You said You made a mistake, I was expecting to see a real mistake. In this case Joe You did disappoint. Burrs not removed by next endmill pass is hardly a mistake . Im 55 years old and own a small tool and die shop and am still learning. I with I had You tube when I was younger with channels like this. Thanks Joe.
@joepie221
@joepie221 3 жыл бұрын
On a large production run of parts, it would be a costly mistake. I like to pass along good habits, and I missed that one. I'll make up for it.
@peterc4450
@peterc4450 3 жыл бұрын
Absolutely astounding, it's looking good.
@joepie221
@joepie221 3 жыл бұрын
Thanks. Its a great little model and should look good next to the others.
@BensWorkshop
@BensWorkshop 3 жыл бұрын
Very nice and a happy thanksgiving to all my American friends.
@joepie221
@joepie221 3 жыл бұрын
Many thanks.
@merlinmagnus873
@merlinmagnus873 3 жыл бұрын
Joe, thanks for that tip about projected surfaces in the previous video. Never thought of doing that and it worked a treat on a part I was making today.
@CobySmolens
@CobySmolens 3 жыл бұрын
Hi Joe, long time watcher, very much appreciate your style, friend. These are little things of beauty you’re breathing life into and I’m happy and grateful to get to watch! I am (very) slowly, so far mostly in my imagination, putting together a machine shop as part of my van building workshop, and I’m learning so much about “all the things”, tools, materials, processes - and loving it! So thanks for being so giving with your knowledge, and wisdom! And happy Thanksgiving!
@samrodian919
@samrodian919 3 жыл бұрын
Joe what another wonderful piece of machining from a true Master Machinist! I wish I had one hundredth of your talent , No one thousandth! Great video. Can't wait for the rest.
@ChrisSherlock
@ChrisSherlock 3 жыл бұрын
Good on 'yer Joe! Another great video demonstrating engineering techniques that us lesser mortals might one day remember and put into practice.
@donstelfox2936
@donstelfox2936 3 жыл бұрын
It is very pleasing to see this go together. Thank you for sharing.
@johnferguson2728
@johnferguson2728 3 жыл бұрын
That is gorgeous Joe. Well done! Thanks for another great video.
@vicmiller7191
@vicmiller7191 3 жыл бұрын
what a beautiful piece or jewelry...Kudos and Happy Thanksgiving Mister Pie.
@kevinsellsit5584
@kevinsellsit5584 3 жыл бұрын
The sign of a true master ... (at 7:26) perfect alignment of the body-protecting-shrapnel-block.
@joepie221
@joepie221 3 жыл бұрын
I hate the sand nature of a slitting saw debris. Keeping it contained is high on my list.
@shifty4277
@shifty4277 3 жыл бұрын
Going to be another work of art! Nice work Joe👍
@peter7755
@peter7755 3 жыл бұрын
It's looking great Joe with some more great advise.
@joebuckley9940
@joebuckley9940 3 жыл бұрын
Very good looking drill press, well done Joe! Thanks for the tutorial.
@joepie221
@joepie221 3 жыл бұрын
My pleasure.
@michaelryan6884
@michaelryan6884 3 жыл бұрын
Another good job! It's looking fine.
@Enigma-Sapiens
@Enigma-Sapiens 3 жыл бұрын
That's a work of art! Thanks, Joe!
@joepie221
@joepie221 3 жыл бұрын
thanks. This little shop should be quite a sight.
@rtkville
@rtkville 3 жыл бұрын
Joe I really enjoy watching you do your magic, you are a master with your machines and videos! Thank you! And a Happy Thanksgiving to all!
@joepie221
@joepie221 3 жыл бұрын
I'm enjoying this miniature journey. Its a lot of fun to test the creativity and skill needed.
@craigsuslosky3974
@craigsuslosky3974 3 жыл бұрын
Beautiful work, as always! Love that fixture plate of yours, so versatile! Neat trick with the fixture block when doing the table, simple and effective! Thank you for sharing, and Happy Thanksgiving to you and your family!!
@joepie221
@joepie221 3 жыл бұрын
That little fixture plate is worth its weight in gold for work like this. I plan to run a few shortly and put them on my web store. I'll make 10-32 and maybe 5mm versions.
@DonDegidio
@DonDegidio 3 жыл бұрын
Hi Joe, Another excellent video. Always impressed with the way you can machine those small gears and worms. Great tip about the direction of milling to eliminate burrs. Happy Thanksgiving to you and the family and you all stay safe.
@matthewfort3740
@matthewfort3740 3 жыл бұрын
This little guys does have some good details.
@joepie221
@joepie221 3 жыл бұрын
I was looking forward to this one. :)
@joeziegler9054
@joeziegler9054 3 жыл бұрын
Another good one Joe Pie! Thanks for sharing. Happy Thanksgiving to you and your family.
@therealme613
@therealme613 Жыл бұрын
Wow so nicely done
@joepie221
@joepie221 Жыл бұрын
Thank you!
@davidmyhre2720
@davidmyhre2720 3 жыл бұрын
Hey Joe thank you sir. Have a great turkey day
@joepie221
@joepie221 3 жыл бұрын
Thank you. Same to you.
@mperry9025
@mperry9025 3 жыл бұрын
Thanks Joe
@robertoswalt319
@robertoswalt319 3 жыл бұрын
Thanks for the early Thanksgiving gift Joe. Wishing you and your loved ones a Happy Thanksgiving along with health and safe travels.
@joepie221
@joepie221 3 жыл бұрын
Thanks. Same to you.
@russellmcclenning9607
@russellmcclenning9607 3 жыл бұрын
Another great piece to this great series thank you Joe.
@joepie221
@joepie221 3 жыл бұрын
This little shop is going to be beautiful when complete. I'm glad I can take y'all along for the ride.
@billoxley5315
@billoxley5315 3 жыл бұрын
Excellent ! Happy Thanksgiving.
@deangdmppajj4692
@deangdmppajj4692 3 жыл бұрын
Thanks again Joe for another great video 👌
@tomsgarage6264
@tomsgarage6264 2 жыл бұрын
Awesome work! Super interesting! Thanks
@joepie221
@joepie221 2 жыл бұрын
Glad you enjoyed it! Come back for the reveal.
@JustinDaze
@JustinDaze 3 жыл бұрын
Excellent video. I'm starting to learn a bit more about machining and you're doing a great job at explaining every step.
@joepie221
@joepie221 3 жыл бұрын
Happy to do it.
@lennym1273
@lennym1273 3 жыл бұрын
Joe you amaze me ever time...
@joepie221
@joepie221 3 жыл бұрын
Many thanks.
@johnvaluk1401
@johnvaluk1401 3 жыл бұрын
Coming along nicely. Have a good Thanksgiving Joe.
@joell439
@joell439 3 жыл бұрын
Beautiful - 👍👍😎👍👍. Thanks for the tips. Happy Thanksgiving 🦃
@joepie221
@joepie221 3 жыл бұрын
Thank you.
@michaeldurling793
@michaeldurling793 3 жыл бұрын
Happy Thanksgiving Joe, this miniature series is blowing my mind but when your good I guess you need a challenge now and then. What would be truly mind blowing is a video of miniature machines making miniature machines.
@joepie221
@joepie221 3 жыл бұрын
I'll run them in the end.
@MatthewScott
@MatthewScott 3 жыл бұрын
Those tiny slots are bad ass. You always do great work. Happy Thanksgiving
@joepie221
@joepie221 3 жыл бұрын
Much appreciated.
@CreaseysWorkshop
@CreaseysWorkshop 3 жыл бұрын
A thing of beauty
@joepie221
@joepie221 3 жыл бұрын
Thanks John.
@raymondhorvatin1050
@raymondhorvatin1050 3 жыл бұрын
I have yet to watch a video that I haven't liked beautiful work thank you for sharing
@donkintz281
@donkintz281 3 жыл бұрын
Another great video!! HAPPY THANKSGIVING
@joepie221
@joepie221 3 жыл бұрын
Thank you. Same to you.
@danvandertorre6349
@danvandertorre6349 3 жыл бұрын
a very nice drill press is it for the small people.
@al69770-b
@al69770-b 3 жыл бұрын
Cheers Joe, really enjoyed this one....is looking beutifull! Happy thanksgiving from Aus too.... All the best to you and your family mate.
@joepie221
@joepie221 3 жыл бұрын
Much appreciated.
@graemebrumfitt6668
@graemebrumfitt6668 3 жыл бұрын
Very nicely done Joe, I do hope you do a display video of all the models when you have made them that would be awesome to see! Happy one to you and yours. TFS, GB :)
@joepie221
@joepie221 3 жыл бұрын
I'll link them in the end.
@williamsquires3070
@williamsquires3070 3 жыл бұрын
Happy Thanksgiving, Joe. Another nifty toolmaking video - I give thanks! 😻
@joepie221
@joepie221 3 жыл бұрын
Turkey day is a day of reflection. One of my favorite holidays. We can all find things to be thankful for.
@baghdadmerc69
@baghdadmerc69 3 жыл бұрын
Incredible attention to detail 😎😎😎
@joepie221
@joepie221 3 жыл бұрын
Thanks. I want to be proud of it when I'm done with no regrets.
@emmettgraham833
@emmettgraham833 3 жыл бұрын
Happy Thanksgiving to you and your family..thanks for all the great videos.
@joepie221
@joepie221 3 жыл бұрын
Thanks.
@mitchellbixby9696
@mitchellbixby9696 3 жыл бұрын
I usually drill and tap first, before slitting, drilling my clearance hole depth just pass center or a little deeper
@joepie221
@joepie221 3 жыл бұрын
Either way will result in the same end product. Each is good.
@christurley391
@christurley391 3 жыл бұрын
Thanks for the video.
@itsaposcj5
@itsaposcj5 3 жыл бұрын
Happy Thanksgiving Joe.
@joepie221
@joepie221 3 жыл бұрын
Same to you!
@ronmiller682
@ronmiller682 3 жыл бұрын
Very nice build, always love your videos
@joepie221
@joepie221 3 жыл бұрын
Glad to make them for you all.
@khalidkhalaf5153
@khalidkhalaf5153 3 жыл бұрын
thank you
@chuirios365
@chuirios365 3 жыл бұрын
Very very nice Joe!
@joepie221
@joepie221 3 жыл бұрын
Thanks Chuui.
@AmateurRedneckWorkshop
@AmateurRedneckWorkshop 3 жыл бұрын
That was incredible as usual. I now believe you can make even microscopic tools.
@TomokosEnterprize
@TomokosEnterprize 3 жыл бұрын
Hey Joe. There is always a point when turning single point threads when they just "Look Right" machining to the burrs is always a good idea, especially when working with these small pieces. I love the way you treat them as much larger pieces my friend. That comment on the sharks was really funny my friend. Who knows when they will show up. Defiantly never with a warning eh, LOL. I am always impressed with your patience my friend. Is there ever a way to rattle your cage ?, LOL. There is nothing sweeter than an evening with Joe Pie. Take care eh !
@joepie221
@joepie221 3 жыл бұрын
Thanks for the visit.
@TomokosEnterprize
@TomokosEnterprize 3 жыл бұрын
@@joepie221 It is always a treat t0 come and visit with you Joe.
@Bass2010
@Bass2010 3 жыл бұрын
Looking very nice good job and are you going to get a small motor and try and get them to run
@Henning_S.
@Henning_S. 3 жыл бұрын
I think he wants to use the steam engine to run these machines. He just needs to build a boiler...
@varmint243davev7
@varmint243davev7 3 жыл бұрын
Very nicely done sir ! I was a little surprised you didn't drill the holes before cutting the slits. I have had trouble with things bending when cutting the slit first.
@joepie221
@joepie221 3 жыл бұрын
If I had witnessed the part flex under drilling pressure, I'd have stuck a small wedge or feeler gage in the slit for support.
@howder1951
@howder1951 3 жыл бұрын
Very nice Joe!
@joepie221
@joepie221 3 жыл бұрын
Glad you enjoyed it
@rootvalue
@rootvalue 3 жыл бұрын
Love this series so much. Thanks for sharing. Happy Thanksgiving Joe.
@joepie221
@joepie221 3 жыл бұрын
Thanks. Same to you.
@TheEvertw
@TheEvertw 3 жыл бұрын
So beautiful!
@joepie221
@joepie221 3 жыл бұрын
I agree. Thanks. Great kits.
@mpetersen6
@mpetersen6 3 жыл бұрын
👍👍👍 Good thing the slitting saw didn't grab when the hole collapsed What's the one thing most drill presses have in common. The tables are always too small!
@TrPrecisionMachining
@TrPrecisionMachining 3 жыл бұрын
Very good video Joe
@dennisleadbetter7721
@dennisleadbetter7721 3 жыл бұрын
Hi Joe, Enjoyed watching you have so much fun making your minature workshop. With minaturisation comes closer or finer tolerances. Looking forward to seeing this one completed too to sit beside the lathe and arbour press. And that raises another question, does this model drill include a chuck or a tapered spindle? Regards Dennis.
@toolbox-gua
@toolbox-gua 3 жыл бұрын
Looking so good!
@joepie221
@joepie221 3 жыл бұрын
The upper parts will really make it come alive. Thanks.
@mikepelelo5657
@mikepelelo5657 3 жыл бұрын
Thanks and have a great Thanksgiving Joe.
@joepie221
@joepie221 3 жыл бұрын
Thanks, you too!
@timothypowell5687
@timothypowell5687 3 жыл бұрын
Happy Thanksgiving to you and your family. Thanku for the awesome videos..!
@joepie221
@joepie221 3 жыл бұрын
My pleasure.
@SpruceSculptures
@SpruceSculptures 3 жыл бұрын
Happy Thanksgiving to you and your family.
@joepie221
@joepie221 3 жыл бұрын
Thanks, Same to you.
@OmeMachining
@OmeMachining 3 жыл бұрын
Looking good 👍👍👏
@joepie221
@joepie221 3 жыл бұрын
Thank you!
@djvanzz
@djvanzz 3 жыл бұрын
I'm working on this exact model and I'd love to see the details you mentioned at the end of the video! Happy Thanksgiving!
@joepie221
@joepie221 3 жыл бұрын
I'd be happy to explain it to you. For ease, please ask me again in a new comment. Don'y reply to this one.
@jerseyjoe2684
@jerseyjoe2684 3 жыл бұрын
Great video, Joe. Soon you'll have enough miniature machinery to put your spiders to work making watch parts lol. Eta: Happy Thanksgiving, buddy!
@joepie221
@joepie221 3 жыл бұрын
8 legs = 4 machines each. Think of the labor savings !!!
@gilb6982
@gilb6982 3 жыл бұрын
very nice job ! happy turkey day !
@joepie221
@joepie221 3 жыл бұрын
Thank you. Same to you.
@davidmasters9793
@davidmasters9793 3 жыл бұрын
Really nice Joe Happy dead bird day
@joepie221
@joepie221 3 жыл бұрын
Can't let it die in vain.
@jmegown52302
@jmegown52302 2 жыл бұрын
Loving this project. When demonstrating the crank, you need one of those tiny hand pointers on a stick like ScoutCrafter uses.
@joepie221
@joepie221 2 жыл бұрын
I actually have one but it was too big.
@naifhubaishi7528
@naifhubaishi7528 2 жыл бұрын
@@joepie221 I wanna join to your patreon page but I have some questions how I can Chat with you
@joepie221
@joepie221 2 жыл бұрын
@@naifhubaishi7528 The patreon page has a comment link that I get notifications of, and my website has a contact page as well. Thanks for your interest.
@CraigLYoung
@CraigLYoung 3 жыл бұрын
Thanks for sharing 👍
@joepie221
@joepie221 3 жыл бұрын
No problem 👍
@James-fs4rn
@James-fs4rn 3 жыл бұрын
👍 Happy Thanksgiving Joe!
@joepie221
@joepie221 3 жыл бұрын
Same to you!
@garthbutton699
@garthbutton699 3 жыл бұрын
Another stellar video,Happy Thanksgiving to you and your family.🤗😎🤗😎
@joepie221
@joepie221 3 жыл бұрын
Thank you. Same to you.
@robingibson7503
@robingibson7503 3 жыл бұрын
This is soooo impressive!!!!
@joepie221
@joepie221 3 жыл бұрын
Thank you. Cool little model.
@angelramos-2005
@angelramos-2005 3 жыл бұрын
Beautiful work.At 2: 35 you use the spin indexer to register your work because you can´t do it in your lathe chuck.Thank you and Happy Thanksgiving.
@joepie221
@joepie221 3 жыл бұрын
I wish I could do that feature quickly on my lathe. I just haven't modified it to do features like that.
@farmersteve129
@farmersteve129 3 жыл бұрын
Looking good & that rear pulley looks just like it was always meant to be that way... having seen your build I would be doing that way rather than with the casting if I ever build one!
@lecnac855
@lecnac855 3 жыл бұрын
Awesome.
@mith5168
@mith5168 3 жыл бұрын
Nice Joe… I see they just released a Jacobs Chuck kit add-on for this kit.
@joepie221
@joepie221 3 жыл бұрын
I'll have to check that out. Can you provide a link. I'm unable to locate it.
@mith5168
@mith5168 3 жыл бұрын
Now you are making feeling foolish…just pulling your chain (a bit). I just thought you’d come back with something like” no worries - I’ve got an Albrecht-style already queued up for a future video”… I say to myself > Egg meet Face. Joe, Hope you and yours had a great Thanksgiving, and look forward to the next installment…I’ll stay on topic next time, I promise. Mike
@jhawker2895
@jhawker2895 3 жыл бұрын
Awesome video .... Thanks for sharing .. Happy Thanksgiving..
@joepie221
@joepie221 3 жыл бұрын
Thanks for dropping by.
@bugkiller5293
@bugkiller5293 3 жыл бұрын
I see your fixture plate and hold down clamps and they do look very useful. Did you make these your self? Or store bought? I would like to build my own. All part of the fun!!!! I like the dimensions of yours. Any chance you doing a short vidio on them?
@TheTacktishion
@TheTacktishion 3 жыл бұрын
Nice job...! As always good close up camera work....!Have a nice TURKEY DAY yourself.....!
You Can't Cut What You Can't Hold !!!
25:40
Joe Pie
Рет қаралды 66 М.
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 17 МЛН
When Cucumbers Meet PVC Pipe The Results Are Wild! 🤭
00:44
Crafty Buddy
Рет қаралды 63 МЛН
Turn Off the Vacum And Sit Back and Laugh 🤣
00:34
SKITSFUL
Рет қаралды 10 МЛН
كم بصير عمركم عام ٢٠٢٥😍 #shorts #hasanandnour
00:27
hasan and nour shorts
Рет қаралды 12 МЛН
World's Best Drill Press Upgrades
29:27
Marius Hornberger
Рет қаралды 1,7 МЛН
1 Day Build  ---  Make Your Own Drill Press Vise
27:16
Joe Pie
Рет қаралды 43 М.
Machining a Miniature Lathe - The Reverse Gear Lever
24:36
Joe Pie
Рет қаралды 32 М.
A simple alignment  tool.
7:59
Gerald's Garage
Рет қаралды 13 М.
The HOLY GRAIL of Precision Machining | SIP Hydroptic 6 Jig Borer
29:51
Cutting Edge Engineering Australia
Рет қаралды 2,5 МЛН
Transforming A Stainless Steel Bolt Into A Fully Functioning Miniature Lathe Chuck
28:44
Me Charging My Phone Before Going Out
0:18
Godfrey Twins
Рет қаралды 15 МЛН
Cách tính trở kháng loa khi đấu nối tiếp và song song!
0:20
Making iPhone16 pink📱
0:34
Juno Craft 주노 크래프트
Рет қаралды 31 МЛН
iPhone - г*овно?! 💩 #apple #iphone
1:01
Алишер Бейсебай - Техноблог
Рет қаралды 786 М.
WOW 😱 How to Make AirPods from Regular Headphones
0:47
ALABAYCHIC
Рет қаралды 15 МЛН