Beats Studio 2 Wireless Inside Panel Part Replacement

[@ハシビロコウちゃん-c1r]

the disassembly is much harder than I expected, thanks to your video, time to buy a solder iron.

[@nigelkelly2286]

Rip

[@samanthahall5247]

Where can I find u

[@jonanderson70]

Thank you for posting a thorough video. Much appreciated!

[@adimudiraj]

Great video! I need to do the same but on the left panel. Is there a video for that or is it similar to the right side? Thank you!

[@Joesge]

I will leave a video down below of the left OUTSIDE panel replacement. Obviously you are replacing the left INSIDE panel, but this will show you how to tear down the left side, and put it all back together. Just skip the part where they replace the Outside panel kzbin.info/www/bejne/d2TYf6yDfpuehM0&ab_channel=Joe%27sGaming%26Electronics

[@adimudiraj]

@@Joesge Thank you!

[@MrsLovelysteph]

This is too complicated to do myself. I know I'd be paying mostly for convenience. Although I must say that $65 & $80 is a bit much. My black and red glossy beats model B0501 right inside and outside panel is equally cracked and need to be replaced. How do you charge for this service in full?

[@XDr3aM]

Im looking for a video on how to replace the head band part..mine broke on one side where it meets the gold bracket for adjusting

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with a screenshot of your question and we will be able to better assist you there. - Aaron P

[@CHEAPSKATE]

How much does your repair center cost?

[@OMascara-dt2nk]

Thank you so much !👍👍👍👍👍

[@tekchandp]

Will this work for Studio 3 ?

[@Joesge]

Thanks for watching! The process is similar, and if you need the inside panel, you can find it on our website here: bit.ly/2PXEw9U . CH

[@marioescobar1630]

where on your webstie can i buy the adhesive that you use in the video at 13:35 ?

[@ElBochoron]

Do you need soldering iron for this too or you can just use what’s in there already

[@Joesge]

We'd recommend a solder iron.

[@SeregorMax]

Hi! Thanks for the awesome tutorial! Do you guys send the parts to Brazil? Cheers

[@Joesge]

You're welcome, And we can ship to brazil.

[@jay.p3g]

Is there a way I could carefully do this whole inside internal panel without using a soder ?

[@midnight_.v]

I just got my beats studio 3s on the 26th of December 2018 and the shit already cracked😑. Im not very happy at all with the quality of the $350 headphones

[@Joesge]

This is very unfortunate! Did you get a warranty with the headphones? If not, we do offer repair services here: JoesGE.com/pages/repair-services

[@edgarrojas8240]

TINO__THE__KING i know same i got the red ones and when i put them over my head they snaped😒

[@Nativektowner]

Did u guys try fixing it? Lol i got free beats studio 3 and fixed broken band. Super easy fix..but this is a true challenge for me. I found one for 20 and will try to follow this video

[@CoolCommentzRool]

@@Nativektowner Any update on the 20$ beats?

[@Thefifthjack05]

which line would i need to cut to get rid of active noise cancelling

[@Joesge]

I wouldn't recommend cutting any wires on the studio 2 as it will potentially make the device unusable

[@midnightgaming4269]

How much would the repair cost if I sent mine in and how much would the panel itself be

[@Joesge]

$80 total for the repair + part. 65 for the part.

[@boboleg4186]

Wow really? For a small inner panel, I think I'll just try to ignore the little crack

[@HighOffLife.]

Joe's Gaming & Electronics are we able to send it in your repair centre if im living in Canada?

[@m0llyb0y15]

@@Joesge You could buy a new pair if thats the case not worth fixing

[@kalvinrhone901]

@@boboleg4186 did ignoring it work? Not trolling. Genuinely interested. Also, how long did you have yours before they cracked.

[@frederholland]

Hey Joe!!! Can you help me with something? My Beats Studio 2 Wireless droped off inside a sink full of water and since then the right side (where the panel is) has a buzzing sound when on wireless mode, however if I use wired it works fine with no weezing at all. Is there a way to fix this? Thanks in advance!!! Nice work with the videos :)

[@vintageroyal]

Can I send mines in 😭

[@danielschmitt7427]

I have no sound coming from the left ear piece. How can I tell which part I need so I can order from you guys?.

[@Joesge]

Thanks for the comment. The issue you are describing sounds like a faulty internal wire. Here is a link to the part: www.joesge.com/products/beats-studio-2-wired-wireless-speaker-2-core-wire-clip-red-white-parts?_pos=12&_sid=4b6eed3a0&_ss=r If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services -David P

[@mernocman]

How much would you charge to replace both L and R inside panels?

[@Joesge]

It would cost $120 for both wireless inside panels, If you have a wired pair it would cost $90. That includes free shipping both ways, in the USA.

[@anthonylopez382]

do you guys have the speaker driver from studio ? is it the same from the solo ?

[@Micha-zt1gk]

Could you send me a photo of left side motherboard ?

[@Joesge]

Please contact us at [e-mail] and we can better assist you there.

[@darwinortiz-pizarro129]

Can I just send mine to you?

[@Joesge]

You totally can:) www.joesge.com/pages/fix-beats-by-dre

[@MrCatreal]

I have a pair of beat with no serial number is it located somewhere in side of the headphone Yes I have through the box away

[@Joesge]

What model of headphones do you have? -David P

[@kahiauandkeeaola808]

Dang it. I thought it was gonna be easy, but I need the soldering machine

[@Joesge]

Thanks for watching! Soldering equipment can be bought for relatively cheap, either online or at almost any department store.

[@kahiauandkeeaola808]

Joe's Gaming & Electronics is there any website I can buy the inside panels? Can’t find it on amazon or eBay.

[@Joesge]

We post the link to the parts in the description, but you can also find it here: bit.ly/2xsx8JW

[@kahiauandkeeaola808]

Joe's Gaming & Electronics also wanted to ask, if unsoldering and re-soldering the wires effect the quality of the sound?

[@brettb6804]

@@kahiauandkeeaola808 depends, if it's done sloppy, it could become disconnected and might affect it, but I dont think beats makes their solders professional perfect like sony or bose

[@25marrero]

What do you guys charge for that same job break in side

[@Joesge]

Thanks for the comment. We currently charge $75.00 to replace a inside panel of studio 2 wireless headphones. If you would like your item repaired by a professional you can fill out this repair form here: www.joesge.com/pages/repair-services -David P

[@treboogie1914]

Do you sell the part that you install at the 8:00 mark. I have looked on your website and did not see them. I need a left side in blue.

[@Joesge]

Tre, we do not have the part listed. Please reach out to [e-mail] in regards to setting up an order with us. Ruslan P

[@firstnamelastname3238]

I need to repair my Solo 3s like this.

[@shadonnagary6032]

How much do y’all charge for that

[@Joesge]

We are more the happy to help you out with this issue. Unfortunately we are unable to quote you on this repair at the moment. If you need a quote you will have to send your device into our repair center. We offer free shipping and free diagnostics. Please visit the link attached to start a repair request. www.joesge.com/pages/repair-services

[@JimboFlanabananagan]

While this process may seem slightly inconvenient, it’s really not that much work. People see a soldering iron and immediately they run for the phone book to call their closest repair shop, or just buy a whole new device. When the part is only 20 USD or less, a little bit of effort is worth the money saved. Lol people are deadass afraid of a little heat and solder.

[@Joesge]

Your not wrong:)

[@silvernblack8317]

Thats skill lol... I'm In NY 201 area code thats NJ correct? I'm definitely Interested In dropping that $80 for repair work (cracked Inside bar) rather than pay $250 at least for another pair. Let me know UPS Is good friends with me lol

[@Joesge]

Thanks for watching! You can find our repair form here: JoesGE.com/pages/repair-services , and shipping is free in the U.S. We send you a USPS label to your email upon completion on the repair form. CH

[@rdsgraphix3785]

can i replace the casing of my right speakers in the solo 2

[@Joesge]

You sure can

[@CPTSaveAHoe247]

Will the inside panel from the wired B0500 fit the B0501?

[@Joesge]

No those parts are not interchangeable. Joe

[@CPTSaveAHoe247]

just out of curiosity, what’s the difference between the two?

[@Joesge]

One is wired, the other is wireless

[@Honeybadger007-hklrkch]

Now, what if those cheap plastic panels crack in same exact way as the part you replaced? People will get so angry they paid for the kit and it cracks in 4 days after all that effort and hard work!!

[@nayefalkurahi3357]

be careful those wires are live! the battery is still connected.. you could short something easily..

[@brettb6804]

That's why I say this is a sloppy way to do it, and he uses metal to pry stuff, just use plastic to not short it and he's kinda rough too

[@clownnig3414]

I️ straight fucked my beats. One side snapped. And I️ can’t wear them. I️m legit broke as hell. I️ wanna fix them so bad. How much would it cost for you to fix them? Like I️ tried to supper glue them but no.

[@Joesge]

Email a photo to our support team [e-mail]

[@Waaaay2Fly]

Soooooo...... what you're telling me is I should just go ahead and get some tape huh?

[@Joesge]

Yessir :)

[@fastmoneye4925]

Can I just send you mine to fix

[@Joesge]

Sure www.joesge.com/pages/fix-beats-by-dre

[@Joesge]

Sure www.joesge.com/pages/fix-beats-by-dre

[@VaSh240]

May I know for the R earpiece, there are Red and Copper color wire, which one goes to Positive and which one goes to Negative?? I only notice the L earpiece got the Red one to + and White one to -

[@Joesge]

From our experience red is usually plus.

[@matthieundumbi3888]

can i use this method for the left side ? do you have a viseo on that ?

[@goleft4088]

🏃🏾‍♂️🏃🏾‍♂️🏃🏾‍♂️🏃🏾‍♂️

[@brettb6804]

Your guys products are way too expensive for repairs, found some for 13$ each, and if their anything like oem, they gonna break, so hell no I'm not paying 45 for them

[@Joesge]

All of our parts are genuine.

[@brettb6804]

@@Joesge yep, which is why I went for cheaper because they gonna break again😂

[@brettb6804]

Just like oem ones that came with it

[@Joesge]

Original Repair Part - www.joesge.com/products/beats-by-dre-studio-2-wireless-inside-panels-parts Main In Repair Center - www.joesge.com/pages/fix-beats-by-dre

[@Ty-hr3si]

goddamn i only got 2 mins into this video before i thought "fuck this im just using tape" lol no offense bro but nobody gonna be removing there (non re-usable) glue for the ear muffs and disconnecting/saudering the fuckin speakers you crazy?😂 it would just be worth new headphones at that point and the reason they break is cause the company uses weak plastic on purpose because the speakers will never blow and they gotta get more money from you somehow if not it would be like Michelin selling you a lifetime warranty tire😂

[@Joesge]

Thanks for watching! It is fully up to you if you want to fix them or not. We make these videos for those who want to attempt the repair themselves, the adhesive can be replaced and each part can be bought separately. Or, you can send it to repair shops like us and get them repaired and get a repair warranty. If you would like them repaired, we do offer repair services here: JoesGE.com/pages/repair-services

[@ayemod2k]

fuck this this is too hard ill just duct tape it

[@Joesge]

You can always send it in for repair - www.joesge.com/pages/repair-service

[@slackerzsincity6947]

Just scratch the whole headphone on the surface. Lol, atleast put a rag under the headphone. Customers picks this up and says, wtf this isn’t mines.

[@Joesge]

Good thing we don’t have this issue 👍🏻

[@slackerzsincity6947]

Joe's Gaming & Electronics good work btw. Good tutorial.

[@Joesge]

Thank you :)