How To Install Beats By Dre Pro Detox DJ Headphone Headband Leather Replacement Repair JoesGE

Send your Beats in for repair - bit.ly/2keSzr0
Buy this part on our site - bit.ly/2waxhS6
Questions? Need Parts? Contact us:
[e-mail]
360.362.1722

[@BerndKampl]

It's 2023 and I'm coming back to this video for the 3rd time to replace my head bands. I hope this video never gets taken down. Thank you for repairability!

[@Joesge]

Hello, you're very welcome. Thank you for the comment. Please like and subscribe for more content like this 😊

[@danydepp8487]

Wow you are awesome man! Thank you!!! Thank you!!! Thank you!!!. The tricky part was soldering the cable but just a bit of patience and you're good. Revivied the beats pro again.

[@Joesge]

Glad it helped

[@bwzkee]

Thank you for the video! i buyed used pro beats with crackled leather and now these looking new🤗 only to loose the tiny screw was tricky a little bit, one of the headband are broken and now i want to find some new one and replace it.

[@Yeo_Studio]

just as a quick warning, my headphones screws were coated in loctite. This meant a few of the screws.... mainly the leather holding clip, 2 of 4 of those screws either completely snapped or I blunted the female end of the screw and the dremel had to come out to cut a ridge in order to get a screw driver to it! just a warning. I'm hoping some of my sunglasses screws will fit and my dremel can cut out the screws where the heads snapped off!

[@philatkins4243]

Damn! I wish I would have read this before i had to fabricate new a new way for the clamp to hold the band.

[@bastipear2864]

You sir are awesome! I cursed a few times, but in the end i fixed my beats. Thanks my man!

[@Joesge]

Good work! Did you end up buying the parts from us?

[@rainerpavletic4814]

Thank you for the instruction. Now I can change the headband of my headphone once it arrives.

[@Joesge]

Your very welcome:)

[@imvs7736]

Thank you a million times, afraid to use the soldering iron but it did well

[@Joesge]

Woohoo

[@Joesge]

Good work :)

[@mihaillefterov1033]

Awesome Video ! Detailed explanation, which truly helped me out and gave me the courage to do this myself . Big Ups from Bulgaria 🖖🏼

[@Joesge]

We appreciate your positive feedback. Please like, subscribe and share the video. It's our oxygen. It fuels our fire.

[@jonas7516]

Thanks for the excellent video! Even though I am not that good at soldering, I was able to perform the repair on my headphones with a new headband leather from China. One of the screws at 3:50 broke off though, and the other looked quite rusty as well, so I probably won't take it apart anymore. It was kind of to be expected though, as my pair is almost 8 years old now. Hopefully they will last a few more years after this!

[@dominikmrmaster]

My screw at 3:50 broke off too, shit 😂

[@feny8]

Same here. I gave up half way and said fuck this shit I’ll get new ones haha

[@OnTwoFan]

Is it genuine leather or synthetic?

[@sweetboykills2376]

Where did you get the sleeves for the band and replacements for the inside of the band??

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with your question. We will be able to better assist you there. - JoesGE

[@Sv.Ruslan]

Useful video! Please tell me how thick you need to use the hex screwdriver? for example, out of the smallest, there are 0.9; 1.3; 1.5 mm or more?

[@Joesge]

T5

[@JRBricha]

Thanks for the video, i ended up getting there in the end. i have to admit i have never done anything like this before, and the end result has ended up being one of the jankiest things ever. like others i stripped the screws so i ended up trying to hammer the screws with a flathead and broke them lol., so now it is held together with tape! still better than peeling leather anywhere though. My soldering was also pretty jank, but they function just fine in the end.

[@Joesge]

The first step to becoming a tech ninja is to absolutely botch your first repair. Every singe one of our techs has done it. It just takes time.

[@Andifoulds]

A great help!!!! Thank you for sharing and explaining it all step by step and as easy as possible 👍🏽

[@Joesge]

Thanks for the feedback. Our goal is to help you :)

[@kabuddy5410]

Great Video! and Very Educational. Keep Up the Goodwork my Friend.

[@Joesge]

Thanks, will do!

[@bluebeam1333]

I stripped my screw at 6:15 I'm looking to sent it in to you

[@Joesge]

Hello, unfortunately, we do not repair this device anymore. We do sell the parts at www.joesge.com though. - Aaron P

[@pierrefragonard5367]

Thanks for the video. I tried to replace the headband unfortunately the + on the head of the screw (that has a circle alum cover) worn out. Sad to say I worn out the other side also. I also noticed that the bass effect were gone when I removed the one side with three wires (gold, green, and red). There's still sound coming on that side of the speaker but the bass effect was less compared to the other side that I did not touch. Is there anything I've done wrong?

[@TimothyMoore]

You did the wires in reverse.

[@leuheucongtu5189]

What kind of screw you ues to remove the tab to change the headband bro ? Sorry for my bad english

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with a screenshot of your question and we will be able to better assist you there. - Aaron P

[@RiviDude]

So the black tape you put inside does not eventually interfere with the sliding action of the headphones being that you seemed to have left it in there? Thanks for your time.

[@DJshanExpress]

Any idea about the shipping charges to Dubai? And how many days will take to receive the order ?))🤔

[@Joesge]

You will have to go through the checkout process to see how long and the cost of the shipping charges.

[@louish2]

My 8 year old headset is like new again! Thanks for making this video!

[@mymouvies]

Many thanks for this tutorial, really helpful, my Beats Pro is now nearly new Maybe it's unnecessary to put away the part at 3:54 From France

[@Joesge]

Thank you for watching, and thanks for the feedback! We are happy this could help! CH

[@quentindelzor2401]

tu n'as pas des galères à dévisser certain vis?

[@오서경-u4t]

I am curious about the size of the screw at 3:50. Please let me know what you should use. Please.

[@Joesge]

Thanks for watching! The one for these headphones is the T5, which you can find here www.joesge.com/products/beats-by-dre-screwdriver-tool-t5-repair-tools-1 . CH

[@oscarmendoza9020]

Amazing tutorial video! unfortunately in Mexico there are not a lot of places where I can get my headband installed, I´m thinking of doing it myself, your tutorial makes it look so easy, the only thing I´m concerned about is the welding part, I have zero experience doing that, is there any advice you can give me? tools? Or something? Thanks a lot!

[@Joesge]

We can definitely help you out.

[@R2D0M3plz]

At 3:13 when you used the screwdriver to take out those big hinge screws; what was the exact size of screwdriver? Also, do you know the model of the screw? I damaged the screw trying to take it out with a screwdriver that fit.Seems youre using a special one with a certain technique. Please let me know; thank you!

[@Joesge]

We do use the T5 screwdriver. Be careful with the screws they are aluminum and can break easy.

[@R2D0M3plz]

Hi, thanks for the reply! I meant the 2 bigger screws that the circular beauty piece covers which have to be pryed. Do you know the screwdriver you used there? Theres one on each side for the hinge

[@Joesge]

It would be a large philips screwdriver. Apply lots of pressure and it will come out.

[@andresfelipemarinzapata8006]

Do you sell the 3d designs of the beats detox parts?

[@SolidWatcher]

Can this be done without any solder?

[@Joesge]

Unfortunately no.

[@briangrider2449]

How much would you charge to do this if I mail all replacement parts?

[@Joesge]

We do not use any other parts unless they have been purchased to us, because we cant offer a warranty.

[@DiGiTALiSODMG]

how much though ?

[@gadget183]

Man, this is too much of a long process, I was definitely looking to buy a new headband for my red Beats Pro because I’ve already replaced the ear cups but now I see what the requirements are for replacing the headband, I don’t think I’ll even bother, or I may just pay someone to do it for me!,

[@YooDoofus]

Awsome job 👍I tried it but i stripped the screws and now idk how to take them out. I stripped the on the metal that holds the leather

[@Joesge]

It’s a really tough repair!

[@renstarhurst3302]

Do the bans still wear down "Flaking leather" after new install?

[@Joesge]

Over time all leather will start flaking.

[@ervin23yt]

Brilliant video :-) .... where can I buy the internal 1.2mm Ø wire (from speaker to speaker through the headband)

[@ervin23yt]

Found it on your homepage :-) www.joesge.com/collections/parts/products/beats-by-dre-pro-3-core-internal-main-wire-wires-parts

[@papoea1100]

Any tip how to get the lil screws out. They won’t move at all mine cuz the thing is almost a decade years old

[@Joesge]

Thanks for the comment. I would suggest using a heat gun to heat up the screws. This will loosen up the lock tight. -David P

[@rossdemo4350]

Excellent video. I was wondering if you sell this beats pro Replacement Screw and cap. Mine is missing. Let me know, please. Thanks

[@Joesge]

Thank you! Are you referring to the large swivel screw on the Beats Pro? MD.

[@saadrashid340]

The screws are so fragile. I tried unscrewing the big screw but it wore out so quickly and now I’m getting no grip to unscrew it. Which screwdriver did you use (the big one) to unscrew the big screw at 3:14?

[@Joesge]

Thanks for watching! The one being used there is a Phillips, about a standard size.

[@saadrashid340]

The big screw head got damaged when I tried to open it. I can’t replace the headband as a result. 😟

[@Joesge]

That is not good. We do offer repair services as an option if you still want them fixed. Just fill out a repair form here: JoesGE.com/pages/repair-services

[@saadrashid340]

Joe's Gaming & Electronics I’m from India. Will you be able to ship it back and repair it despite the screw head being damaged?

[@Joesge]

We do ship to India, though we do not cover the shipping cost outside of the U.S. We can definitely repair them with the damaged screw though.

[@АлександрАндреевич-э3и]

Привет! Что делать если головка маленьких винтов просто поломалась?

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with a screenshot of your question and we will be able to better assist you there. - Aaron P

[@gabepaz2640]

after watching this video, I will not be buying a slightly used set of headphones with the leather headband slowly chipping away. I don't have any of these tools. Why would such a simple job also be so intense and complicated? Can't believe you need to almost 100% disassemble the set to replace a headband, still a great vid.

[@dudedude5843]

Hi am in Germany and i just want to replace the headband but i went to your side and i found the price is 200Euro if there's damage but mine doesn't have any damage. how much it will cost to replace the headband?

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with your question. We will be able to better assist you there. - JoesGE

[@victorjorgeestrada4982]

gracias amigo tengo unos igual y verdaderamente son sumamente espectaculares calidad de sonido se me cayeron al piso y se despegaron los spekers y no sabia como destaparlo gracias nuevamente lo logre por tu video un abrazo desde Caracas

[@Joesge]

Gracias por el comentario. Estamos encantados de ayudarle. -David P

[@askurmani459]

joe, on your pictures of the headband, and the cups them self, you have the joe's logo, which drove me away to buy from another company, you should look into that. it looks like everything is branded "joe's"

[@Joesge]

Askur, the products that we sell do not have Joe's brand on them. That is added to the image. Ruslan P

[@askurmani459]

@@Joesge yes, that's what im pointing out, it looks as if they're branded.

[@Joesge]

That is correct, but they are not and that is something that we will look into resolving. Thank you for giving us a heads up! Ruslan P

[@adriangraham2334]

What type of screw did you use to take the round ear piece off

[@Joesge]

Thanks for the comment. Can you specify what time in the video the screw was removed? Thanks -David P

[@MsEusz]

hello, i would like to ask you, where you get new "clip" i men this black part, what is inside this headband

[@Joesge]

You can email us and we can sell you the clip - [e-mail]

[@mira7cz]

Hi, I'm looking for the small T5 screws. Do you know where to find these? Thanks

[@Joesge]

Thanks for the comment. Here is a link to our repair parts: www.joesge.com/products/beats-by-dre-pro-headband-tab-cover-aluminium-screws-parts If the part you are looking for is out of stock you can enter your email in the "Item out of stock - notify me!" section and you will be notified when this item is in stock. If you would like your item repaired by a professional you can fill out this repair form here: www.joesge.com/pages/repair-services -David P

[@mira7cz]

Joe's Gaming & Electronics Thank you for the info. Would they fit also Beats Solo HD or Solo? Thanks.

[@Joesge]

No, the beats pro T5 screws will not fit any other model. Are you looking to purchase other screws? -David P

[@cristian46901]

Got the same headphones do u have any customs ear pads

[@Joesge]

Thanks for the comment. Currently, we only have black beats pro earpads available. www.joesge.com/products/beats-by-dre-pro-leather-ear-pad-muffs-ear-pads-pair-black-parts?_pos=7&_sid=502e949b7&_ss=r -David P

[@sangramjadhav8754]

joes thank you so much for your valuable video you are amazing thanks a lot

[@Joesge]

Your welcome

[@anotherrandomperson4162]

what type of screws does the beats pro use? (ex.. T3,T5,etc..)

[@Joesge]

Bobby, the Beats Pro headphones use the T5 screws. Ruslan P

[@Sv.Ruslan]

@@Joesge 2.5 mm? Thank you!

[@mcmh9523]

Wow. Apparently these headphones were not designed with repairability in mind. Big shame for such an expensive set of headphones. No wonder Beats was purchased by Apple, the world's least repair-friendly company.

[@Joesge]

Yeah these are some of the original beats. They have honestly got easier to fix since then.

[@ra.streams]

@@Joesge do you still repair these?

How come you can unscrew the small torx screws so easily... Mine are like welded, can't move them even by a bit.

[@Joesge]

We recommend using these screwdrivers, as you do not want to damage the screws: www.joesge.com/products/beats-by-dre-screwdriver-tool-t5-repair-tools-1?variant=7905323188270

[@6eostorm]

@@Joesge $39 dollars plus tax? GTFOH 😂😂

[@tyriecarter9549]

I have same one white now black look crazy 😢lol help

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with your question. We will be able to better assist you there. - JoesGE

[@alejandrofiore35]

How much you will charge to restore them

[@marouaneGM]

Hello, While repairing my Beats pro , i Found that the adjustement clips are completely broken on my beats. You've replaced yours in the video, can you Link me a replacement Part ?

[@Joesge]

Email us and we will set up an invoice - [e-mail]

[@DogKingG7]

are you in US？ can I ship my pro to you？ and u fix for me？

[@Joesge]

Hello, unfortunately, we do not repair this device anymore. We do sell the parts at www.joesge.com though. - Aaron P

[@rayray5288]

I am looking for earcups and the metal part that keeps the headphones tight on your head but I couldn't find them on your website. Is there any other place that sells them???

[@Joesge]

We have Beats Pro parts coming in.We will be selling parts for these headphones very soon.

[@weeeeeeee945]

do you still offer this service???

[@Joesge]

Hello, unfortunately, we do not repair this device anymore. We do sell the parts at www.joesge.com though. - Aaron P

[@TM-go2fo]

Hi Joe, thanks for this video, but I’m scare cause I’m not master of this... would you fix my beats???and I’ll ship it to you if you could...and tell me the cost...please let me know 🙏thanks again

[@Joesge]

Yes we can do this repair for you. bit.ly/2xLFe17

[@djmelomaniac1320]

I have a beats pro...I want to replace it's earpads and headband cover... what would be it's cots... including shipping...m from India

[@Joesge]

Shipping cost would be paid by you both ways. We charge $110 to professionally repair the headband leather and ear pads. Please start a repair request on our website if you choose to move forward on this. www.joesge.com/pages/repair-services

[@xXxDamon96]

Is there any chance that you also have a repair service station somewhere in Germany? 😅 you are great at this but i don’t have the tools to do this :/ also I’m a little scared to do it myself..

[@Joesge]

Thanks for the comment. Unfortunately, we are not located in Germany. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services -David P

[@dudedude5843]

Hab das gleiches problem. hast du eine Lösung dafür gefunden?

[@Vibes1hundred]

Hi joe would I be able to send you mine for a price to replace all cushions?

[@rayjax6218]

Worked great looks like new. Thanks a lot!

[@Joesge]

Fantastic! You are most welcome :) MD.

[@nicolasthorefranz]

Do you sell outside the US?

[@6eostorm]

I urge you to do your research before doing this installation. If you don’t have the tools to do this it can be costly. If you read the comments a lot of people damaged the screws trying to take them off because you need special tip T5 screw drivers. This guy failed to warned people about that in the video. You will need special screwdrivers, a welding gun, plus the new pads you could be looking on spending over a 100 dollars! I just changed the ear pads and cut and glued the headband over the old one. You can barely tell it’s glued on there unless you inspect them carefully. Good luck 👍🏽

[@Joesge]

👍🏼

[@headshakerbeatz9350]

My screws are stripped so I can't do it. plus i dont have an soldering iron

[@Joesge]

Thanks for the comment. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services -David P

[@bradygomez5688]

Hey what’s the tab called the one that has the logo on it I need to order one for my pros

[@Joesge]

+Brady Gomez would be the hinge tab cover

[@Joesge]

Those are tough to find even for us

[@jmtztech]

Joe's Gaming & Electronics I need to replace mine too. Can y’all point me in the right direction? A screw broke inside mine.

[@Nvnxthe2nd]

Do you also sale the hinges?

[@Joesge]

Yes we do

[@Nvnxthe2nd]

Joe's Gaming & Electronics I didn’t see it in the shop can you paste a link if you wouldn’t mind.

[@Joesge]

Email [e-mail] and ask for the part. We could help you more there.

[@noureddinekheznadji2393]

It’s DAVID with JOES channel......

[@Joesge]

David is the oracle of Beats. Ruslan P

[@TheJeetkanaskar]

is this still available?

[@Joesge]

Do so still sell the parts on our website. www.joesge.com/products/beats-by-dre-pro-headband-leather-cover-parts

[@TheJeetkanaskar]

​@@Joesge do you provide international shipping?

[@moscorocio]

nice video, i have broken my beats pro,I can not find the small screws (4 scrwes) to fix the headband, I just need 2, could you sell them please ?

[@Joesge]

Thanks for watching! Unfortunately, we do not have any of these screws for sale. We can, however, repair them for you, if you follow the steps to fill out our repair form here: JoesGE.com/pages/repair-services. CH.

[@MarcErena]

hey bro i need one clip where is the reference in your store o where i can buy?

[@Joesge]

Hello, thanks for the comment. What clip are you referencing? Here is a link to our store: www.joesge.com/collections/parts If you can not find the part on our website you will need to send your headphones in to our repair center and we can make a specialized order for that part.

[@MarcErena]

It’s the clip that you change in 6.11 can you give mi the link of that part?

[@Joesge]

Unfortunately we do not sell that part at this time. However if you send the headphones into our repair center we can repair this issue. Here is a link to our repair form. Please follow the steps to send in your headphones. www.joesge.com/pages/repair-services

[@alex8975]

Can you link the tools you used?

[@Joesge]

Thank you for watching our video. You will need the T5 screwdriver located here: www.joesge.com/products/beats-by-dre-screwdriver-tool-t5-repair-tools-1?variant=7905306509358, and also a large Phillips Screwdriver (Which we do not have listed). Ruslan P

[@killme2203]

it's intricate.

[@Joesge]

Very

[@cristian46901]

Im in Chicago Illinois how much u charge me ??same headphones labor and shipping

[@Joesge]

Hello NZ, thank you for watching our video. You most certainly can send your headphones in for an estimated repair cost of $80 if you submit our repair form here: JoesGE.com/pages/repair-services, make sure you use Google Chrome to submit our repair form and check your junk/spam folder for the free shipping label if you are unable to find it in your inbox. Ruslan P

[@gkuljay5639]

Hey thr.. need to repair my beats pro headphones.. and I'm from India.. so what is the process to send it to u..!!

[@Joesge]

Fill out the repair form on our website and send it in www.joesge.com/pages/fix-beats-by-dre

[@joeface03]

Non Solder solution: Cut main internal wire ahead of solder point and strip. Reattach later with electrical tape.

[@Joesge]

Not the best idea unless you want intermittent sound in the near future.

[@danydepp8487]

WTF this is a stupid advice. The internal wire has 3 wires and they come painted secured. DO NOT DO THIS!!! Just unsolder as is showed in the video.

[@joeface03]

@@Joesge Wouldn't be a problem if done correctly.

[@ixbalankecarmonara4984]

Thanks for your help!!!

[@Joesge]

Glad we can help:) Please like, subscribe and share the video.

[@NorlantafariRasta]

hi friend you habe the clip in stock i need one!!!

[@Joesge]

Just headband leather

[@ГригорийЛисовский-у7т]

Cool! Thank you!

[@PurpSmith]

Thank you!

[@brandonberens8595]

What is the name of the black hinge slides that are in the actual headband? Both of mine are broken and I’ve searched everything but can’t find it to order the part.

[@kylehanz1230]

Same man, i cant find them anywhere. He states in the video one of his was broke and he was going to replace it. Cant find anything else on it though

[@MsEusz]

bump !!

[@michelperron5619]

me too i'ld like to have it too thank

[@demertknight]

Bump!!!!

[@borlean4691]

bump

[@mission7failed]

thanks man❤❤❤

[@Joesge]

Thank you for watching our video Raja :) Ruslan P

[@mission7failed]

@@Joesge you welcome bro❤👍

[@andychoo9605]

do international shipping?

[@Joesge]

Yes we do :)

[@Kama_lefagaoalii]

How much do you charge if I ship from Australia

[@Kama_lefagaoalii]

Joe's Gaming & Electronics how much from Australia

[@_Chosen_One_]

🙏🏻🙏🏻🙏🏻

[@armanmardani8118]

tanx❤

[@Joesge]

Hello, you're very welcome. Thank you for the comment. Please like and subscribe for more content like this 😊

[@dominguezfelipe4]

GRACIASSSSS

[@Joesge]

Your welcome:)

[@mrkikoscience]

you didnt mention where to solder

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with a screenshot of your question and we will be able to better assist you there. - Aaron P

[@barszrhl445]

superb !

[@Joesge]

Thank you for the love Baris :) Ruslan P

[@jalexromero]

Great tuturial. Did someone fart on 13:52? LOL Soldering is more difficult than what you make it appear, but great tutorial txs!

[@Joesge]

No problem 😌

[@KieranOD94]

Nah, imma just buy a replacement headband, cut it down the middle and just sew it onto my existing one

[@Joesge]

That would definitely be an interesting project, good luck!

[@KieranOD94]

@@Joesge 😂

[@JesusGomez-jd2bi]

How did that workout for you

[@JesusGomez-jd2bi]

@Kieran O'Donnell

[@VooDooMusic]

it seems one would be able to repair this without removing an ear cup by just cutting off the original headband, and if you're replacing a torn up headband it's pretty much trash anyways

[@Joesge]

Just have to be carful not the cut any wires. Plus its metal so it can be tough

[@lassnerfrank1991]

zu schnell erklärt und die hälfte vergessen, hab sämtliche schrauben abgebrochen.

[@Nickword1]

Gott damn this is a mission! lol

[@Joesge]

ooohhh yeah it is

[@masterstepztv9221]

All of this work, Just to replace the damn cushion. That’s long. I’m better of with my Sennheiser HD25. This is some bullshit. I ain’t got time this. Stupid flaking leather.

[@Joesge]

It is one heck of a process.

[@Kingkutter228]

You forgot a piece

[@Joesge]

🤷

[@iccarnage2186]

Well Mine just ended up in the garbage 👌

[@jahbless2114]

why cant there be an easier way i wish i didnt have to solder thats out of my ballpark

[@Joesge]

+Jah Bless there is an easier way. Send it to our repair center we fix this issue for $70. www.joesge.com/pages/fix-beats-by-dre

[@Joesge]

Easier way is to send it to us Send your Beats in for repair - bit.ly/2keSzr0

[@Ironie666]

i had phones which were a lot easier to open than this little piece of shit. Thanks for your video, mate. I'm still in the process of repairing.

[@Joesge]

Let us know if you need any additional help

[@Ironie666]

@@Joesge Wow, this is really an amazing piece of help - i am really thankful for that! 🖤 I gladly finished the repair, tho three screws of the small sidepieces which hold the leather in place broke off. Do you maybe know a place or some way how i can still apply them? I also thought about just glueing them together, as it doesn't really hold too much imho.

[@wiglikitzinger]

Medo de fazer isso e quebrar hahaha

[@universemediallc]

WAY too many steps just for the headband. I'll find another solution.

[@Joesge]

😂 doing things right ain’t easy.

[@AdamRafeedie]

you had me until you said "solder"

[@shayarhashim7567]

That is so f**k up....

[@noureddinekheznadji2393]

It’s DAVID with JOES channel.......

[@Joesge]

David is the oracle of Beats. Ruslan P