John Deere 830 Diesel Rice Speical Community Antique Tractor Pullers Monroe WI 7/20/13

[@panders55]

That old 830 is stout!!!

[@l337pwnage]

Beast mode. Had one growing up. Us kids called it "the big bomber" cuz the muffler was blown out. Neighbors said they could hear it 5 miles away when we put it on a blower.

[@bobocaterpillar3697]

he ONLY stopped because their was an ocean in the way

[@stevenking2980]

Holy crap that Deere could pull a dang mountain. That's some serious torque right there. Wow man, that sumbitch is strong.

[@maxnewellmz8025656]

torque in the purest form; sir i solute you for making such a well done video. i also solute the driver for the control while his front was in the air

[@rbagel55]

I had to research this this tractor. 470 CI 2 cyd diesel.This engine was made for low RPMs and a shitload of torque

[@66632701]

+rbagel55 падписвайся на мой канал

[@michaelrichter8973]

Back inthe day these tractors got the job done ,and with little fuel!!

[@oilypatch323]

I pull with same tractor. Unless your running fluid in those tires, run 5psi and ease back on that throttle. You'll full pull every time!

[@92xl]

I'm a Farmall guy but how can you not like this?

[@connorlenhardt3369]

92xl same!!!!!!!

[@eclipsegst9419]

92xl I lean Deere on newer stuff but i love all antiques. I have a JD 530 (this ones little brother, gas) and a 4010. And from the red side a Farmall H and M.

[@michaelhalsall5684]

It would be interesting to see how an International 650 Diesel would compare to the JD 830. The 2 cylinder JD diesels had huge torque low dow, the IH diesels used higher RPM and twice as many cylinders to have the same pulling power!

[@tubefluid]

@@michaelhalsall5684 You know how big those 2 cylinders are, right? :)

[@Americkslander]

@@eclipsegst9419 you got a 530? them babies are rare

[@mattgrooms3298]

That engine couldn't tell the sled was there! Pure raw power.

[@nikosglezos3370]

1020

[@wileycoyote3370]

Never even worked that 830

[@kenhampshire4996]

Beautiful tractor! I spent many, many hours on 70 and 730 diesels. Never got to drive one of these beauties...

[@karlk6860]

I grew up doing everything there was to do with an A with a loader, moving snow all winter, pulling cars out of the ditch, plowing discing cultivating mowing hay windrowing and baling I did everything with that tractor! I could never figure out how the tractor was NEVER loud when you were running it but when my dad was running it I could hear that tractor pulling 2 miles away! I ran that tractor for 41 years and about 10 years ago my dad sold it, it kind of hurt to see it go.

[@mikescaffo4850]

The torque those 2 cylinder john deere tractors put out is incredible great video of that very subject of torque

[@dweathers56b]

These old monsters were slow as agonizing death but the wouldn't give up. There limit was getting the front wheels high enough to do a rear roll over.

[@michaelhalsall5684]

What is the difference between an 830 and an 830 Rice Special other than the rear tires? Great to this old two cylinder diesel still going strong!

[@mosesduprey8183]

Michael Halsall the main difference was the rice and cane tires, single rib front tires, and various mud guards so the tractor would withstand the wetter conditions of working in rice fields

[@Snowmobileman68]

that thing tears up the track lol

[@deanbrown6758]

op

[@rossbryan6102]

THE RICE TIRES TEND TO DO THAT ON A SOFTER TRACK, HOWEVER ON A VERY HARD AND DRY TRACK , WITH A POWERFUL TRACTOR THE TREADS CAN BE DAMAGED IN THE CENTERS OF THE "Vs"!

[@chiefhobbyist3203]

Everytime I see one of these 2 cyl. JD's pull it just amazes me. I know it's a big bore/long stroke, but still...

[@carlosalbertodreselopesdre775]

Power full 830🚜🚜🚜💪💪💪

[@turboslag]

Torque and traction on that thing!

[@cornshucker77]

Man, that baby is a puller!

[@buckmorrison8047]

Jonny payvheck

[@DoubleVisionandco]

Hell of a lot of Torque and some seriously nasty looking deep bar tread tires. Can't go wrong with that combo for pulling.

[@hawkrs50]

it was sweet in person I am using a GoPro Hero 3 and walking next to the tractor when I upload them you tube asks to steady the video it seems to work well

[@thegarage161]

nothin runs like a deer

[@wileycoyote3370]

Unless it's chased by a case

[@banjoblast]

Holy Crap!!! What a beast!! I love it!! How'd you keep the camera going along the tractor and how'd you keep it steady?

[@belarminosilva4319]

banjoblast aonde posso encontrar miniatura do John der r e 730

[@hotice8885]

How much/How far did this beast end up pulling, anyway?

[@jtoddjb]

That was awesome

[@murraytownsing5662]

The sound of angels singing

[@jamesfaulk-bg2bd]

I have a 830 and it's a great pulling tractor and I still work It also

[@mikeschoeffter7420]

Oh baby, thats a beautiful thing !

[@RUMELYTRACTOR]

That ole girl is healthy.

[@juanasanelli6831]

Podra tirar cientos de veces asi y no rompera NADA! QUE tractor Los JD de ahora son de juguete

[@deerepower337]

Like a boss

[@malcolmsee3477]

Two cylinder John Deere power and torque at it’s utmost refinement! The end of the evolution! I’ve got one of these brutes but I have to admit my ‘64 3020 Diesel which is actually at the lower end of the New Generation series that finally put John Deere at the top and never looked back can easily out class this and any two banger! But I love the two cylinder era and own 6 of them!

[@DesertDigger1]

What a monster!

[@richardharris7714]

What size tire is on your tractor

[@stevenbaes8228]

torque monster

[@karinadler2308]

WHAT A BEAST!!!

[@kevof895]

That's sucker pulling like a grown man I love those old two-cylinder John Deere's and the new generation John Deere great video anybody got a 830 fixer upper that's running for sale

[@mercedesguy8520]

how much torque that thing running im guessing 2500 or moor

[@66632701]

+Cross Durazo падписвайся на мой канал

[@macfarms]

Yeah 400lb-ft is outrageous torque for a 84hp motor. The torque is comparable to like a 7410 or 7510 I think, they are 120-135hp 6cyl motors.

[@reinierrooi5650]

PERCHERON !....the 830, ..... ,he' CAN !

[@edwardmccutchen250]

I want a maintenance guide on John Deere&how to modify old fords!(anybody-know what bookstore?

[@biggreentractor5235]

Edward Mccutchen what model?

[@ramonluisareyuna7199]

Que máquinas más bacanes

[@ramonluisareyuna7199]

Que máquinas más hemosas

[@danw6014]

It ran out of sled.

[@rancho3cp]

ESO SI ES TORQUE

[@patrickshaw8595]

Beautiful.

[@biggreentractor5235]

This a pony or electric start?

[@hawkrs50]

not sure wasn't my tractor

[@Americkslander]

John Deere 830's are diesel so it would be a Pony motor. since it was a rice special, its more equipped for watery environments, but its virtually the same tractor, just with slight changes to the body and different tires

[@biggreentractor5235]

Just because it’s a diesel don’t mean it has a pony. Got one myself with the pony but a friend of mine has the electric model. If you don’t believe me included is a link with the battery count. Note it has electric start option. 24 volt starter like the 4010 iron horse diesels. www.tractordata.com/farm-tractors/000/0/5/53-john-deere-830.html

[@justinberry3453]

No sweat

[@BigBlockSpence]

What gear were you pulling in?

[@hawkrs50]

not sure I am thinking 1st gear

[@sheilamclaughlin963]

55 Massey w outdoor out pull em in the field, ha ha that John smell sure sucks though

[@lukethedrifter3363]

A 55 Massey couldn't pull a sick whore off a slippery piss pot.

[@Americkslander]

​@@sheilamclaughlin963 a Massey 55 has been claimed to have 41 Horse power (draw bar) while the JD 830 has a claimed horsepower of 69.66. (drawbar) that is a whopping difference of 28.66 hp. now if we go by the tested drawbar results, the Massey 55 has 57.55 hp on the draw bar while the JD 830 has 67.15 horse power. that comes out to a difference of 9.6 horse power, so that "John Smell" beats your Massey-Harris by quite a bit. (if you're wondering where I got this info, I got it from TractorData.com, check it for yourself)

[@tennesseesawmillguy1590]

I set this as my wake up alarm. I hit snooze three times every morning.

[@tomrisar5492]

I've liked that this series of JD tractors we had a 630 Gas and liked the hood lines and colors. I just realized that I may have been responsible for it's demise, I was pulling a deep tillage cultivator, a 10 footer. And a shaft broke in the transmission rendering it too costly to fix, I now think it failed because I went up a gear to finish faster. It was around 1977 so the 630 was 2 generations behind the times, dad ended up making a trade for a JD 3020 gas.

[@TheFarmerfitz]

I understand the dilemma of wanting to finish the field when you also have somewhere to be.. You don't wanna be late but you're almost done and that's when the field seems to get bigger... lol so its either be late or kick ot up a notch and get done... And that's also when break downs like to happen...

[@russellparr9053]

I am and 2clinder fan But will look look at the old molines and IHC even the Case. They were all made in the USA.

[@waynegeorge2707]

Very nice machine. I just hate to see them being torn up and abused like that though.

[@jonnydough3752]

Trust me, its not at all abused. That John Deere will do that all day long without a problem. If tractors of today could take half of that use without breaking, it would be a miracle

[@Americkslander]

those tractors were built out of thick, strong Iron and steel, rather todays steel and aluminum tractors, so it would take quite bit to tear up one of them bad boys. the only abuse I can think of that would harm a older John Deere would be neglect