John Deere L120 48" deck spindle replacement

  Рет қаралды 60,003

Ryan Gehrke

Ryan Gehrke

Күн бұрын

Пікірлер: 33
@paulnandico2370
@paulnandico2370 2 жыл бұрын
Replace them all. Good idea. Even though only one failed, when I removed them, all were worn, with wobble.
@waelgerish
@waelgerish 4 жыл бұрын
Il130 I bought a mower deck rebuild kit of eBay it turned out to be junk wasted my time and energy and ended up buying from a local John Deere dealer I would definitely recommend to spend the few extra dollars and get a quality parts nice video I wish I have seen it before I worked on my mower 👍
@anthonymarino4260
@anthonymarino4260 2 жыл бұрын
buy once cry once
@garytompkins6955
@garytompkins6955 5 жыл бұрын
It would be nice to see the spindle replacement process since that is the title of the video. :-)
@ryangehrke8019
@ryangehrke8019 4 жыл бұрын
Did you have issues following along?
@blairthandi7058
@blairthandi7058 6 жыл бұрын
Sweet video. We had to replace one of our spindles after 13 years. Yeah, John Deere doesn't give the 4 bolts with it, you need to get them separately. I need to paint the deck over, since old paint is coming off after 13 years. We in Abbotsford BC finally have a month straight of sunny weather coming. Time to cut the grass.
@ryangehrke8019
@ryangehrke8019 6 жыл бұрын
Blair Thandi lucky you on the weather, middle of April and we just got hit with another snow storm here in Southern Minnesota! I see no mowing in my immediate future.
@blairthandi7058
@blairthandi7058 6 жыл бұрын
Saw that on the Wild vs Jets broadcast.
@jamessizemore7449
@jamessizemore7449 5 жыл бұрын
Ryan Gehrke 9
@harrison4803
@harrison4803 6 жыл бұрын
Good information! I will be replacing 1 when the weather breaks! I always start my videos before I take the belt off, so I can replay it and review how it was before! :)
@ryangehrke8019
@ryangehrke8019 6 жыл бұрын
John H good luck with the replacement. It's still snowing here so won't be mowing for a while which is fine with me.
@harrison4803
@harrison4803 6 жыл бұрын
Yeah, Ryan, I am just West of St. Louis and we should be in the 60's now but instead 45 today but near 80 by Wed. They have a saying in Missouri, "if you don't like the weather, wait a day and it will change".
@donny-ho1bm
@donny-ho1bm 3 жыл бұрын
Can a 48 inch deck fit on a ride on that has a 42 inch deck..
@johnmilner7603
@johnmilner7603 Жыл бұрын
The grease does get into the sealed bearing when 80 pumps are achieved. You will know your done when it come out of the blade side and top of the spindle. There is a video online where a guy prooved it by using a different color grease. Don’t listen to the know it all’s. 😅
@tommyscruggs7265
@tommyscruggs7265 3 жыл бұрын
If the bearings in the spindles don’t have the grease covers removed toward the inside of the spindles that grease zerk is useless.
@douglasdailey5998
@douglasdailey5998 5 жыл бұрын
Wow that's the cleanest deck that I have ever seen.
@SeanTaylor23
@SeanTaylor23 2 жыл бұрын
What is the nut size
@grasspro104
@grasspro104 6 жыл бұрын
The bearings are sealed. Unless you use a needle on grease gun and inject it under the rubber seal greasing the nipple on spindle will just keep out moisture and will not reach the bearings. Unless John Deer redesigned the spindles that's how they work.
@TRUCKERMcD
@TRUCKERMcD 5 жыл бұрын
You can pull the plastic covers off the inside of the bearings so the grease gets in. :D
@jameskenney1340
@jameskenney1340 2 жыл бұрын
The old pulley assembly did not come with a Grace might because it was a selling point to make money
@johnsantillo5904
@johnsantillo5904 5 жыл бұрын
Were the holes for the blades tapped?
@ryangehrke8019
@ryangehrke8019 5 жыл бұрын
Yes
@Youllvanish
@Youllvanish 2 жыл бұрын
I got 3 new spindles, new belt and new blades (basically a rebuild kit) for $108. Wait the couple days and please don't pay 50 bucks per spindle.spindles. Ebay folks, ebay...
@georgecrutchfield8734
@georgecrutchfield8734 6 жыл бұрын
Grease your spindles before you attach them to the deck, at least my grease gun won't reach the grease zerks after they are attached to the deck. I wish my dealer had spindles that cheap, I ordered mine online.
@Youllvanish
@Youllvanish 2 жыл бұрын
Ebay, get a full rebuild kit for 100 bucks. For the 48" deck.
@dancohen441
@dancohen441 4 жыл бұрын
"Talking about it".
@brianharding7369
@brianharding7369 Жыл бұрын
That new spindle with the Zirk fitting means nothing if the bearings inside are sealed. Do more research. For 160 you can buy a rebuild kit and everything is new. Comes with 12 new self tapping screws too.
@kevinc9006
@kevinc9006 5 жыл бұрын
This lawn mower has been junk since day 1
@ingerrstad4063
@ingerrstad4063 4 ай бұрын
X125
@dawgedr1
@dawgedr1 6 жыл бұрын
You have the main tensioner pulley in the wrong place. You ha vegan idler pulley where it should go.
@ryangehrke8019
@ryangehrke8019 6 жыл бұрын
Put it back together just how I took it apart and works with out any issues.
Replacing Mower Deck Bearings on a John Deer or other mower
27:28
DIYwithWayne
Рет қаралды 72 М.
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
15 Fixing a John Deere L120 Mower Deck
14:35
Memphis Applegate
Рет қаралды 36 М.
John Deere L130 Deck Rebuild | Playing with New Tools!
48:08
Tom Doby Mower Repair
Рет қаралды 2,7 М.
John Deere mower deck bearing replacement
17:56
Halfmoon TechLabs
Рет қаралды 55 М.
Is your Mower Deck Noisy?  John Deere L120 Spindle Bearings - Replaced
14:02
The Handy Homeowner
Рет қаралды 2,2 М.
John Deere 425 54" Mower Deck Spindles: OEM vs Aftermarket
24:41
Foggy Tinkering
Рет қаралды 20 М.
How to Replace Mower Deck bearings on a 42" John Deere Mower Deck
20:29
Johnson's Small Engines
Рет қаралды 61 М.
How To Adjust The Belt Tension On A Riding Lawn Mower
8:10
Steve's Small Engine Saloon
Рет қаралды 1,3 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН