John Deere X700 Series Mower Deck Install (X730 / X734 / X738 / X739 / X750 / X754 / X758)

This will work for all current X7 series tractors, and will be similar for older X7 series (X72X / X74X).
**DISCLAIMER: THE CONTENT IN THIS VIDEO IS NOT BEING INSTALLED BY A JOHN DEERE TECHNICIAN AND I AM IN NO WAY GUARANTEEING THAT THE INSTALLATION OF EQUIPMENT AS DEPICTED WILL BE COVERED UNDER ANY WARRANTY IN THE EVENT OF FAILURE. I WILL ALSO NOT BE HELD LIABLE FOR ANY DAMAGE OR INJURY TO YOURSELF , OTHERS, OR EQUIPMENT DUE TO THE USE OF THIS CONTENT. THIS VIDEO IS FOR ENTERTAINMENT/IDEA PURPOSES AND SHOULD ONLY BE USED AS REFERENCE AND NOT AS A REPLACEMENT TO ACTUAL TECHNICAL DATA.**
***NEW!!! JGG on Facebook here:
profile.php?...
Follow for updates on builds and to see what’s going on!***
**Now you can reach me by email @ [e-mail]**
If you have any in depth questions, need to send a picture or video of a problem you are having, or want more info on something you saw me do or make, feel free to send a message!

[@williamevans7326]

Hi Josh, good mounting demo. I've got a X739 with a 60 inch deck. I want to reiterate the importance of lifting the deck slightly to allow the blades to turn when removing and installing the drive shaft. If you don't you will fight to hang the shaft out of the way when removing the deck, as well as removing the shaft from it's hanger on install. Other than that trick, and lubing the shaft coupler (prevents the balls from seizing), the standard drive shaft is fairly easy to install. The only downside, compared to the quick connect, is you have to get down on the ground to reach up there and slide it on. On the plus side the standard shaft is simple and durable. A few extra tidbits: My model is all wheel drive so it climbs the deck well in both directions but I still find it's easier to mount in the grass to prevent deck sliding. If you turn your wheels in either direction you can pull the brush guard pin out from the side too (remove only one clip). The front deck wheels on the X700's decks are fixed skid type normally found on suspended decks. JD needs to replace them with a caster type as they will dig in a tight turn. If you cut around a crowned tree base, they we dig a circle in the ground. This is especially true with the X739 as it has a 6-8 inch turn radius (with the 60" deck). If you can afford it, buy a second deck. I usually get at minimum 15 years on the body of a well made garden tractor. I still have a cub (nearly identical to the JD X730) that is still in service after nearly 30 years. But... the decks will not last that long and you will find it nearly impossible to get a new deck in the tractors later years. The HC Decks come with the holes pre-bored for the hydraulic mulch kit. You may want to plug them so sand doesn't wear the holes larger over time. Overall the decks preform very well. They are set flat to the sides so anything the deck frame touches is getting cut. Add to this there is a raised front lip, so you have to be a little extra careful not to shave a raised surface like a sidewalk. They lift the grass very well and run fairly clean. Good discharge flow even in tall grass.

[@toddshreve]

I appreciate my auto connect setup even more now. Great video!

[@michaelroth3471]

Am thinking the exact same thing!

[@TheSQUALLLINE]

Great job Josh. Well explained!!

[@bobjohnson4025]

Great video explaining non "Auto Connect" deck install Josh.🙂 I too have a X758 and install the AC deck on a polished smooth shop floor. I have to use a 4'X6' horse mat so the deck does not move when driving the tractor up and over. You can get in trouble real fast if the deck twists side ways too much...been there once...never again! Thanks for the vid...

[@JoshsGreenGarage]

I actually keep one of those mats in the back of my truck! That’s a good idea! Sucks they are so damn heavy though, really hoping tool box mat will work better next time.

[@jamesmabry2261]

Hi josh……I also have X758 which I bought last summer and really like it. The only issue I have had is in leveling the deck and getting the rear draft arm latches to release when ready to disconnect and back off the deck. The latch is spring loaded to close but is suppose to open and “stay” open enough to drive backwards over the deck before it closes back. Mine is very is easy to unlock, but locks back as soon as I let go of it. I know the adjustment of the front draft arm is important in deck leveling but also I think in the relationship to the proper operation of the rear draft latches. I hope you will do a video covering all of the above.

[@nodaklojack]

I really enjoy your x758 videos. Very to the point relevant and informative. I am looking for a part number for black plastic covers that go on the deck that the front wheels drive over, mine are missing

[@JoshsGreenGarage]

I looked them up, looks like there are a number of different parts involved… do you want every part number you will need?

[@Chris-yi6zr]

Hey Josh, I got the 758 in January just mowed with it a couple times I noticed you have the anti-scalp wheel on the front. Been thinking about getting one and also do you notice your deck being noisy from idler, pulley in spring

[@JoshsGreenGarage]

I don’t recall having any odd noise coming from the deck. All I can say is take the belt off, and spin each pulley/spindle. If they spin smoothly and don’t have a ton of play then you should be fine.

[@jschwei1980]

John, I just bought a used X758 and trying to convert from the plow to the mower. I disconnected the plow, but my mid PTO isn't lowering with the hydraulic lever. What am I missing?

[@JoshsGreenGarage]

You mean the deck lift arms? PTO doesn’t move, unless you have auto connect, then I guess it kinda does. Deck lift and plow lift use different levers. You will need to do a couple things. First, you will need to open the diverter valve on the SCV. You can find info about this on my quick hitch tractor prep videos. Then, adjust the mower height to the position indicated for removing the deck. Finally use the UPPER lever and push forward. The lift arms should lower. There is no weight on it though, so you may have to pull it down manually while someone else holds the lever forward. Or, you can start the tractor, and hold the lever forward, it will lower in no time under power. Hope this helps!

[@jschwei1980]

@@JoshsGreenGarage Thanks, had to flip the valve and all set.

[@franciosuys3314]

How do I lower the arm where it hooks into the back of mower deck before connecting drive shaft. I can not get it to go down

[@JoshsGreenGarage]

Turn on the tractor, move the upper lever foreword. Make sure the height adjust is set to the position marked for deck install/removal

[@DH-mf2lv]

What does the 54 inch mower deck weight for a x700 series John Deere?

[@JoshsGreenGarage]

219lbs

[@DH-mf2lv]

I have looked and looked for an answer. Thank you very much!

[@Big-Rouge]

Hey Josh, is the part number for the x700 series 54” HC front deck roller you installed BUC 10313? Thanks

[@JoshsGreenGarage]

Correct, I have a video here: kzbin.info/www/bejne/jnathniQm8ZofLc Near the end is the roller install.

[@Big-Rouge]

@@JoshsGreenGarage Thanks again for the info!

[@JoshsGreenGarage]

Make sure to check your deck serial number though, I want to say there are 2 serial number breaks for the nose roller.

[@Big-Rouge]

@@JoshsGreenGarage Ok, Thanks

[@JoshsGreenGarage]

0-060000 is BUC10329, 060001+ is BUC10313, but says to order BUC11667 now, might have updated part numbers.

[@rogerthomas169]

A few hundred more? Try several thousand more