How to Transfer Designs from Computer to Embroidery Machine (EASIEST WAY!!!)

[@EmbroideryLegacy]

Want to try stitching quality embroidery designs FREE? Try us out by clicking the link below to get 4 free embroidery designs 😀🧵 www.digitizingmadeeasy.com/free-embroidery-legacy-design-kit/

[@virginiawestley9601]

Doesn't let me subscribe to get the free kit offer.

[@Silent-Killer11]

Hey there. Did I really win from a giveaway? And I should contact you? It s on a comment above!!! Is it ture !? 😱😱😱🥺🥺🥺🥺

[@suzti8280]

Hi I downloaded your tutorial but I thought you offer free vinyls heart free , cannot find your free file can you advise where it is please .I already signed up .

[@mikeeggert3381]

thanks for the videos I've watched today - I was thinking of selling my Baby Lock Aurora machine - after never used it and finding it too complicated for a complete novice - but these videos are now getting me to slow down, be patient, and learn the fundamentals... Bravo to the Deer family...

[@adammedina11.16]

Great video John!

[@shannonmargaretbrott7524]

He is very calm and soothing as he speaks in the video.... great job!

[@EmbroideryLegacy]

Thank you Shannon!

[@blissfulacresoffgridhomest2098]

Yes! SO EXCITED! THANK YOU!

[@deedeepena6001]

Thank you James I need help on how to transfer file to my pc is there video i can watch? to put in the right place I have hatch and dooler please help me

[@teriw602]

Hi James,Great video! How about a troubleshooting video in future?I download designs but can't get them to load on my machine...

[@lindathacker3935]

can you help with problem on CE 150 Futura that shows small hoop attached and its not and followed manual exactly but shows it and maxhine wint work with it showing

[@one11sixt4]

Thanks for the video. This was very informative.

[@lesliejutting8830]

I have Luminaire2 the designs I bought and downloaded are in the format pen. How do I change to a pes?

[@tinamoye521]

Thank you for this video and great explanation. Do you know if a WiFi USB stick will work the same? Then I don’t have to physically move the stick from computer to machine. BTW, I have same enterprise machine as in your video.

[@jillsmith4347]

Very helpful! Thanks

[@marjoriecramer9102]

Hi I know you have a video on how to install a font into my hatch program from the wilcom site. Can you tell me where I can find it?

[@joannconley6577]

I have the baby lock Solaris embroidery machine.. please show how to transfer directly to the embroidery machine.

[@EmbroideryLegacy]

JoAnn Conley for brand and model specifics it best to ask your Machine dealer for assistance.

[@kimmcconnell2155]

Love this. Are these designs commercial , am I allowed to download them and create design on shirt, tote bag, and be able to sell it

[@rubyahlo-ruiz2758]

Can I use any of your designs with my Brother Entrepreneur pro 1000.

[@EmbroideryLegacy]

Yes, we provide pes format :)

[@amymoore437]

James, you did a terrific job for your first video.

[@veyseladguzel9801]

Hello, I am writing from Turkey. We do not have an embroidery pattern drawing video here as clearly and clearly as you. Could you please help me with this embroidery drawing or send me the link of this embroidery drawing program, thank you very much.

[@vishalshingala4859]

how can I connect 7 Barudan to on PC system with the bar-code scanner?

[@naybrobk]

What machines will you feature??? I need to learn how to use the embroidery feature on the Bernese B79 and there isn’t much on you tube.

[@terrybarnhill8451]

Need my usb drive on Mac won’t read on my machine Do I format drive with what system files?

[@vidyavageesh4219]

which software you are using to create design ?

[@sylviah1234]

how do I transfer a design lettering from express essentials to my usb thank you

[@gracesifuentes5897]

What type of USB is best for the 10 needle embroidery machine. I have a 32 g and it doesn't work😢

[@norahmcphee4928]

Thank you James, you have just gained another subscriber. Norah, Central Scotland

[@pindyluwho]

How can I make my own design and transfer to my Janome MB7 machone

[@jenjlh2150]

Informative, thanks. Any suggestion for a low budget sewing machine for computerised embroidering?

[@marytonner8804]

MY Brother innov-is 90E does not have a USB portal. How do I transfer my designs from my computer without that? Mary

[@EmbroideryLegacy]

Hi Mary, that would best be answered by your local Brother dealer. If your machine reads “cards” they might suggest a card reader/writer.

[@angelalott9370]

I am still having issues getting my designs such as from my photos to my se2000 it should be able to transfer by wifi

[@blancatorres7506]

Great ! ,but can you please explain how to download the designs using a regular domestic embroidery machine?

[@asuka3407]

Hi I hope you can see my comment... I have an ult 2001 embroidery machine, it works fine but I want to copy the designs I have in the embroidery cards I bought from Brother to my computer so I can use them in a new embroidery machine. How can I do that? I have the card reader but it seems it works for the empty cards only not the ones that have already designs on it. Thank you, I have been searching for an answer for days !!

[@lindaclavin3615]

cant I transfer designs to My Brother machine from laptop using cord that came with it? having trouble fingSmall USB stick?

[@creativedee4663]

What usb should i use for my se600😤😔

[@souhilalarbi5191]

i have machine brother innovis 1500d embroidery and i want to move modele from you tube to my machaine how can i do it ?

[@bobbyd1961]

How do you convert an image from your computer to the correct format to work on your embroidery machine?

[@CalmCollectiveATL]

That is what I thought this video was going to be also. This was nothing but taking a design already in the proper format and putting in the machine.

[@abdullahalmosifer67]

Hi ! Did you find the way ?

[@ItsReadyz]

did you figure out a way I know this was 5 years ago sorry

[@PaigeCalvelli1111]

What if I am making my own design? What application do you recommend to make the file suitable for an embroidery machine?

[@bronx_native]

This is what I have been looking to find out for months .. my brother PE 535 is just sitting as well as my designs . Can anyone help?

[@danasteele]

Has anyone found that out?

[@judithwillcocks9921]

I am going to try this right now thanks

[@vincenzomontefusco8696]

what's a good site to buy designs in a bundle

[@EmbroideryLegacy]

vincenzo montefusco You create your own bundle :) www.digitizingmadeeasy.com/embroidery-legacy-design-club/

[@briscolazaro6819]

Can I use this for singer Legacy SE340

[@dance4technolife]

Where do I buy embroidery machine?

[@qeranyo6741]

Thanks for your help. I have question my embroidery pe535 I tried to download the software but it's not working. Can you help me?

[@setooooowastaken]

Hi, I have Brother samansa sewing machine but I don't have a memory card,can u help me where can I find memory card for my machine? Thanks

[@EmbroideryLegacy]

Levi Ackerman it would be best to inquire with a Brother dealer.

[@thesociety-k5n]

Can I connect to the internet on the embroidery machine computer?

[@EmbroideryLegacy]

Whether you can connect to the internet on your embroidery machine’s computer depends on the specific model. I’d recommend checking your machine’s manual or contacting the manufacturer for more details. 💜

[@colincourier]

wow you certainly know your stuff,you make it easy to understand,im thinking of buying a swf 6 head dual machine,would you know the average price to pay its 2010 model.and if i can get your tutorials to help me i"ll have a succesful business.thank you so much colin

[@barbie2945]

how do i put my own drawings from my iPad and transfer them to the machine?

[@rosieneal3011]

What if we have our own designs can we make them on your website

[@sharonnoles5039]

I have an older 3300 white embroidery machine I use only cards I need to do monograms I can't. Please help. Thanks

[@yookoy]

hi! i just got the brother LB5000s, I inserted my usb into the machine, but nothing pops up. Could it be because i have a lot of files on the usb? just wondering. I"m thinking i need a new stick with not much on it. Pls respond. thank you so much

[@ingeneren]

if I have too many designs on my usb, my brothers will either tell me with an on screen message or my older models will make a long beep like the emergency broadcast system... that lets me know I have to remove a few files so the older machines can the stick

[@ThePoetinPerspective]

I’ve uploaded my design to my usb from my laptop but when I insert my flash drive into my embroidery machine nothing come up... what do I do? Or what did I do wrong?

[@ccloveyou3687]

Did you figure it out I'm having the same issue

[@gabyhernandez4215]

You need to have a special code for the machine to read it. He downloaded already coded designs from a website. I’m sure you don’t know how to code so find someone that does. Then you can upload your design and the machine should be able to read it

[@pujaa9954]

Hi, do you have the answer to that problem? I have same problem too

[@gabyhernandez4215]

@@pujaa9954 if you have Adobe illustrator you should be able to code it there but if you don’t know how then pay someone on Fiverr to do for you.

[@pujaa9954]

@@gabyhernandez4215 thank you for the answer

[@gloryglor7073]

THank you for this video. I have a Alliance single needle baby lock which I received last week, so I have tried with flash drive and cable to transfer my dsign but it's not allow me. it just shows on screen you have no connection with network or with cable to strate to the machine from computer it's showed you don't have enough MG. I appreciate if you let me know what is the problem please.

[@thesociety-k5n]

I want to download the update for the machine's computer via the Internet. Can I do that?

[@EmbroideryLegacy]

Great question! 😊 I recommend reaching out directly to the machine’s manufacturer for the most accurate information and assistance with downloading updates. 💜 Let us know if there’s anything else we can help with!

[@pinklips6081]

straight to the point thank you .

[@gillscarisbrick645]

Thank you James, your tutorial was very clear and so easy to understand.

[@tonismith5678]

How do you transfer my church logo from my computer to my brother embroidery machine? Is there a specific format in which it has to be?

[@EmbroideryLegacy]

Brother usually reads PES format :)

[@hollyburkevics2024]

so how do I get my logo into a PES format I have been trying all day to figure it out and I am about to throw my computer out of the door

[@ingeneren]

@@hollyburkevics2024 PE design or other digitizing programs will have a section on converting the file to the PES format for machine use

[@eustathiastathopoulou9938]

which machine do you use?

[@dollyxx9187]

Hi. Want kind of sewing machine do you use? I want to start a business so I'm watching videos that can help me. I hope you'd reply.

[@EmbroideryLegacy]

Dhiyoy xX For a home machine we use a Brother XP1 and commercial ZSK. www.digitizingmadeeasy.com/zsk-embroidery-machine/

[@CB-TV]

@@EmbroideryLegacy where do I get the XP1??? I can’t find where to buy it

[@ashrafulbaizid1848]

Thanks for this video ❤

[@sunne723]

what machine are you using

[@jg4635]

What machine is it that you use

[@marianavelasco8893]

what I have my own designs that I want to make, how do I import that????

[@wazzap7077]

Mari Vel Same!!!

[@evercleanaeration7198]

Same! were you ever able to figure it out?

[@autumnismeee]

Do I need PES files for fonts also ?

[@rosannebrouwer7054]

I know I can send the design directly from my Mac to my Epic. How do I do that?

[@georgecombs9113]

Great video what machine was tht

[@georgecombs9113]

@TEXT+①⑦①④⑨②②⓪⑤⓪⑨ how do I claim my prize

[@susanmarston9335]

hi can you help i have the digtitizer jr 4.0 and the elna expressive 820 embroidery machine im having trouble getting images from the digitizer to machine please please help

[@carolynmarkusic2353]

Do you have a video on how to transfer designs through a printer cable. My machine does not have a USB port.

[@evelynrodriguez6192]

I need to kw how or where to find the desing and why does not start ehat the computer need to work a program right start doibgcthat first.

[@susanschmitz5871]

Thank you! This was a great video, clear, easy to understand and perfectly explained!

[@karenhomick915]

Absolutely beautiful. So glad to find your videos. Very informative. Thank you.

[@musicapoesias]

Nice video thank you

[@carlosalinas8254]

Are the designs already digitized?

[@kadaker]

When I opened my free designs, it showed a square box with “zip” in it. What do I do now? Your videos are the best!

[@anneashby1290]

How can I transfer designs from an I-pad ,I do not have a computer ,many thanks.

[@EmbroideryLegacy]

Anne Ashby you could use one of these to get files off your iPad to usb. www.amazon.com/Lightning-LOMYGUS-External-Storage-Compatible/dp/B07L27RHCS/ref=sr_1_1_sspa?crid=1331AWS44WONT&dchild=1&keywords=ipad+usb+drive&qid=1601248478&sprefix=ipad+usb+%2Caps%2C218&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFLTlI1VTlENFlITFUmZW5jcnlwdGVkSWQ9QTA5Nzk3MzgxSjNYQlhSS0JNWkhBJmVuY3J5cHRlZEFkSWQ9QTA4MTg3NTAzTUhBRjZEVEc3MFNZJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

[@wegotthewholeworld6361]

If i upload a file is he 100×100mm can i reduce him in the embroidery machine?

[@ritahunter4653]

I am thankful.

[@laurarobles8821]

thanks! what about alphabet files? each letter comes separate, so how to embroider a name?

[@EmbroideryLegacy]

Laura Robles laying out individual font files is easiest to do within a software program. If you want to try a 30 day free trial of Hatch download at www.digitizingmadeeasy.com

[@presheilaismail4563]

So simple! Will it work the same for Futura XL450 machine?

[@EmbroideryLegacy]

It should if it has a USB slot :)

[@desireesaarniit5279]

I have a HE-120 brother embroidery machine, literally would have to buy an almost 200$ card to get my own designs on the machine, does anyone know a better way how to download my designs on the machine?

[@tanjirulislam6264]

kzbin.info/www/bejne/m6iln36thc2hjbM

[@sherrymaylee9714]

Would get info to transfer a CD of designs to computer easily

[@tania6282]

Is there a way to transfer desings that are programmed in my brother pe800 to computer

[@queenstefani1982]

Amazing

[@plee7628]

Thank you for a simple direct and easy to understand video!

[@ckmc909]

Great video!!!!! Thanks.

[@catherinestraub5513]

My brother machine does not support a usb how do I transfer a downloaded file from a chromebook>

[@sans8500]

I HAVE A BROTHER SE625 I CAN 'T GET THE PATTERNS ON USB STICK I SAID PATTERN TO BIG SO WRITH TO THEM THEY MAKE SMALL STILL DOES WORK.

[@EmbroideryLegacy]

Hi Sans, for brand and model specifics it best to ask your Machine dealer for assistance. :)

[@baileeteague4956]

i have a janome mb-4s and i am having trouble putting my logo on my machine... is there some way you can help me with this, i been trying for week and i have got no where

[@EmbroideryLegacy]

Bailee Teague for brand and model specifics it best to ask your Machine dealer for assistance.

[@shirleythibeault6144]

you make it so easy to understand, thank you and a big thumbs up

[@EmbroideryLegacy]

Thanks Shirley! Glad you enjoyed the video :)

[@KatsWild]

Did you need a digitizer program

[@tanjirulislam6264]

kzbin.info/www/bejne/m6iln36thc2hjbM

[@MsChiku]

You were very easy to follow & understand. Thanks so much!🙏🏾

[@jessieschlee3473]

you didn't say anything about unzipping the file. So none of the files on your web page are zipped?

[@monicacampana3295]

Thank you so much

[@sewing3530]

Thanks for such a clear video!

[@komalapillay2443]

Thank you I have a brother machine innov-is 90 e

[@tanjirulislam6264]

kzbin.info/www/bejne/m6iln36thc2hjbM

[@brianturner9175]

Thanks James for the information. Have a good day.

[@2PONDSIDE23]

How do I make sure it is a PES file - I downloaded one from another site - and in my downloads I don't see any PES file

[@shannonschwandner9964]

DUDE PLEASE MAKE MORE ON SOFTWARE FOR LUMINAIRE 2 BROTHER MACHINE. THANKS A BUNCH

[@EmbroideryLegacy]

Be sure to check out our free Digitizing Challenge using Hatch :) The designs can be exported to your brother machine! www.digitizingmadeeasy.com/embroidery-digitizing-challenge/

[@ajmd3655]

Great help for me.Thanks.

[@EmbroideryLegacy]

Thanks for watching :)

[@connienatale7886]

Mine does not take a USB I have a Bernina Artista 180.

[@EmbroideryLegacy]

That makes it tough, does it take cards Connie? As much as I'd love to help, I don't want to steer you wrong. It would be worth consulting your local dealer in that case if it is older technology.

[@connienatale7886]

Yes, it dos take cards.

[@kathieshirley]

I need someone to help me get my hus designs drom my cpu to 3 1/2 floppy? I am using 4D Professional embroidery software. I am desperate for help. If you can't, do you know anyone who can?

[@ingeneren]

while I was learning, I went to my local dealer who I bought my machines from. If your dealer is not available, research your area and find out where the nearest dealer location is that sells your brand. Also, I picked up alot of many helpful tips spending time with my Brother dealer

[@debraburke2130]

How do you remove the density of a design

[@twinkie1773]

What about fonts?