ULTIMATE Fishing Kayak Trailer Build

In this video I build the ULTIMATE Double Kayak Trailer! You can also see how you can win one for yourself!
SPONSORED BY LINCOLN ELECTRIC - bit.ly/JM_Lincoln
Check out Lincoln Electric for all of your welding and fabrication needs.
SIGN UP FOR KAYAK BASS FISHING - bit.ly/JM_KBFS...
Sign up and immediately recieve tons of gift cards!
YAKRODS - bit.ly/JM_YakRods
SAMS KAYAK - bit.ly/JM_Sams...
Johns Kayak - bit.ly/JM_Kayak
If you like this video you're going to love these!
I Make a Guitar From BULLETS & EPOXY for Mat Best - • I Make a Guitar From B...
We SHOOT A Desk With BULLET PROOF GLASS Built In! - • We SHOOT A Desk With B...
WORLDS FIRST Double Decker Desk Build! - • WORLDS FIRST Double De...
HUGE Desk & EPOXY Sign Build for WINCHESTER AMMO! - • HUGE Desk & EPOXY Sign...
You may also love these!
HUGE 26 Foot Long EPOXY River Table Bar Build! - • My LARGEST River Table...
5 EPOXY Tips I Wish I Knew As A Beginner!- • 5 EPOXY Tips I Wish I...
3 LEVELS of Cornhole Boards DIY to PRO Build • 3 LEVELS of Cornhole B...
MERCHANDISE - shop.johnmalec...
PLANS - www.johnmaleck...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
Proudly Supported By:
Woodcraft - bit.ly/JM2021_W...
Timberland PRO - bit.ly/JM_Timbe...
PIT BOSS - bit.ly/30Q9AeB
Lincoln Electric - bit.ly/JM_Lincoln
MAVERICK ABRASIVES - bit.ly/Maverick_JM. SAVE 10%- CODE: MALECKI10
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMal...
Metalworking Tools - kit.co/JohnMal...
Favorite Finishes - kit.co/JohnMal...
My Camera Gear - kit.co/JohnMal...
#KayakBassFishing #KayakTrailer #CustomTrailer

[@randdmoore1]

John: could use a magnet but we're not the fancy. Whike standing in a room with all new Lincoln Electric equipment valued in the 10s of thousands of dollars LOL.

[@everydayjay1002]

I HAVE BEEN WAITING FOR OUTDOOR MATERIAL!!!!!!!!!!!!!!!!!!! YES YES YES YES YES YES YES YES!!!!!!!!!!!!

[@duckylangley]

Let's make Sparks should be your new t-shirt design. With a squirrel welding.

[@BandSWoodcraft]

Sparky the TIG wielding squirrel!

[@joemoskowitz7427]

Great job! I believe that the axle is upside down though. It has a bow in it that's supposed to be up, so that when you load it with weight, it springs to be straight. I doubt there'll be enough weight on it to bow them, but you'll probably see tire wear with the axle upside down like that. Great job otherwise!

[@GrimmCaptain]

Dammit John!

[@kentwoods9016]

I saw that too. Definitely should be flipped over 180 degrees.

[@woodworksbygrampies1284]

I watched your IG live a bit ago! You guys look like you are super excited for tomorrow. It's going to be 3 p.m. my time so I am going to have to make sure that I am somewhere that I cannot be disturbed. I can't wait to see all of the squirrelyness that will be on display tomorrow, LET'S GO!!!

[@szcustomwoodworks6401]

That is a awsome kayak trailer. I think it's a little over built in a heavy duty sort of way, but I guess that means you can hall more beer!!

[@nunyabiznis3595]

haul?

[@kaydog2008]

Great welding video love the trailer. This is what me and my brother built. 2 triangle shape rails standing up with a bar on top connecting the 2 welded on a kit trailer we made 8 support bars 10 inches long welded to the rails 4 on each side covered with foam tube with 8 - 1 inch x 6 foot ratchet straps attach to carry 4 kayaks at an angle with room on the inside to put a floor to carry other stuff we put our pvc pipe rod carriers on the inside of the rails. Than we in close the inside with expanded steel grate with a triangle shape door at the back that open down a locking latch at the top. To keep our stuff safe while we're out fishing.

[@robdelaney007]

DAMMIT JOHN! Where was Jordan's Kayak???

[@jeanetteminer7459]

🙌🙌🙌

[@JayRosz]

The fact that you love fishing makes me love your content even more!

[@garrettscott4094]

BASS ACKWARDS Kayak Trailer, love it.

[@SpencleyDesignCo]

IT'S YAKING SEASON BOYS!

[@dantedavis9449]

So excited to use his kayak… stands on the pier 😂

[@paintballbear]

I use to run one of those Lincoln plasma tables if you want a really close to straight edge run the machine with your tip .05 from the surface of the material (I've cut up to 3/4 in. Thick steel at that height) I've cut 1 in. Before but i haven't found the sweet settings for it yet

[@jayjahn7081]

You all should’ve run the wires for the lights inside of the tube/frame. It would’ve protected the wire for the lights. And since you mentioned tractor supply they sell all those brackets and everything that you fabricated.

[@ADesignInmind]

Love seeing a little arcs, sparks and weld marks on the channel!!!

[@hectorvanderaa]

Loving the metal working, keep it up y’all

[@damienbryant14]

Thank goodness you say “Creek” and not “crick”. I’m from Wisconsin and it drives me nuts when people don’t say it the right way. Stay squirrelly my friends

[@SchysCraftCo.]

Awesome job. Turned out very well. Keep up the great craftsmanship and hard work my friends. fab on. Weld on. Keep making. God bless.

[@Pghsfinest222]

Thats awesome.. im an avid kayak fisherman and live about 2 minutes from your shop

[@John_Malecki]

thats awesome Joseph, you crush the mon ?

[@Pghsfinest222]

@@John_Malecki every so often… I prefer lakes.. you should checkout cranberry glade lake in somerset. There are monster largemouth in that lake

[@kevindavis6042]

Looks great I would add some padding to the support bars so you don't scratch your boats Pipe insulation is perfect for this

[@ChadHooverFishing]

Scratches add character and the river is going to add them anyway. 😜

[@zachharris285]

Tig the root and mig for the fill, you can control your heat, and wire input

[@MCsCreations]

Pretty fantastic build, guys! Well done! 😃 Stay safe there with your families! 🖖😊

[@rayajayi1410]

I was like wait isn't this my woodworking guy. lol Yak life!!

[@bcoorough]

Nice job, that turned out good. You need to flip the axle. The arch should be going up and slightly forward to give you the correct toe in on the tires. They will wear better

[@KarlKKC]

We made one to for 3 kayaks, love bass fishing in the sea have fun guys and awesome build :)

[@25aram12]

Looks very clean!! Awesome work!

[@chrisellerbe3443]

id like to see some plans for this build. I looked on the website and didnt see any! You guys are awesome!

[@feidhlimoshea8180]

Cool. I love kayaking and welding. Might need to make 1 of these. I'm 13 ps I'm pretty sure your root weld should be mig

[@mikewheeler3449]

Nice trailer looking for something like. Cost wise in materials. Thanks

[@vpool13]

Boss Hog! Is so awesome! I could watch that all day! There’s a huge bass tournament in East Harbor @Lakeside Marble Head! At the end of July! Worth checking out if you have time!

[@cswatson4823]

Tip for backing up your trailer. Take your hand and grip the bottom of the steering wheel with your fingers going on top not the bottom of the wheel. Now turn the steering wheel in the direction you want the trailer to go. It works every time.

[@Gerberbaby89]

Nice build I’m looking into getting a couple kayaks for my family and would like to see a diy kayak storage rack

[@anthonymartinez5144]

I don't want a kayak at all but I'm going to enter just so I can win and then donate it to Jordan. Great video as always.

[@jordanheider2662]

You’re too kind

[@MrHerbalchef]

Good call I would do the same...

[@keeganturner8807]

Can’t wait for tonight!

[@kchappie6672]

For a trailer mig is plenty strong enough 💪TIG can produce a cleaner weld but I'd call it over kill in the application

[@jtcarter6238]

Squirrelly time!

[@nickforlini81]

Love this man, been piling kayaks in pick-ups looking for other solutions for years for when we go to the yough or one of the three rivers. We go atleast once a week and i think this will be perfect!

[@seanleroy5263]

Watching this from my desk at Lincoln. Do you think I could charge this as time spent watching training material? 😂

[@woodworksbygrampies1284]

I say YES!

[@DirkieB]

Sam got some hops!

[@CooperAnchors]

John! We would LOVE to send you some anchors

[@mmartian1969]

I recommend putting some padding on the end of those rails sticking out the back of the trailer because you will end up whacking your shins on them.

[@jimmysilviotti9098]

John: You can’t use a modified axel in the state of Pennsylvania…you probably can’t use one anywhere. Florida Man: Hold my beer

[@danssmokintreasures]

haha Florida anything goes.

[@jimmysilviotti9098]

@@danssmokintreasures damn right! 😂

[@CenPapi]

*laughs in Californian*

[@IrishLion-re8bu]

Yay Sam!!! 😀💙🇺🇸

[@woodworksbygrampies1284]

He surely deserves one!

[@WELDEROFMASTER]

Thanks you brother infomation 👍💯

[@skrosscarson6092]

This is sick. I need one. But I need a kayak first.

[@John_Malecki]

Well Skross, if you want you can tune in thursday and maybe win one!

[@skrosscarson6092]

@@John_Malecki I definitely will!

[@metdukh955]

I'm just in love with the tools you've got❤️🖤🖤

[@philipthrasher]

My only concern is where the box tube tongue angle pieces connect to the rectangular base frame. That's a lot of pressure on a small amount of weld. Would be a good idea to weld some flat pieces there to add some extra reinforcement. You could cut out a custom shape on the new plasma.

[@darren6790]

Oh the welding sun burn on his left arm. Been there done that too many times.

[@snoops6965]

If you unscrew the terminal on your amp clamp you can drill a hole into an f clamp and bolt it on to that No more worrying about thick metal

[@John_Malecki]

Awesome tip!

[@woodworksbygrampies1284]

That's brilliant!

[@dominiccelio6826]

The fact the John fish’s makes him an even cooler guy 🎣🎣🎣

[@jeffkulbago1364]

Sweet video! Thanks for sharing. My son and I kayak fish. Where in PA are you located? I can tell you that southwestern PA is limited in terms of options.

[@joelw6215]

Hey John. I was looking at those yaks and didn’t see if they can have paddles or maybe a little motor on the back? Not sure if you’ve ever seen these with them. But if so let me know. Thanks buddy

[@gandjboyd7872]

Congratulations to the future winner . Enjoy the kayak I'll be driving during that time , plus I can't remember what year it was the last time I purchased a fishing license it's been awhile

[@eFish360]

Nice trailer!

[@thompsonfamilyhuntingadven4036]

Yinz should grab some pool noodles (the hollow ones) and split them then run them over the round bar the Yaks are sitting on. Steel on the plastic will rub and mark the yaks, the pool noodles will act as protectant and shock absorber.

[@jimgam730]

John, nice trailer build. Like the design. Question, how did you determine the axel placement?

[@Sofadage]

PIVOT!!!

[@wandahamm103]

How fun!

[@jimmysiniawski7391]

That’s close to your old shop in Braddock. Now what township are you in ?

[@CenPapi]

Do you happen to have plans drawn up for that trailer?

[@BingBangBoomz]

What is the dimensions of the trailer? I am wondering if I can modify an existing jetski trailer to accommodate my fishing yaks as well. Awesome job!

[@christopherburbidge972]

Beautiful build, Gentlemen! Lol I’m gonna have to say that it’s not a true kayak or boat trailer without a storage container for life jackets and all of the xtra crap! Lol. Step it up brotha! 🤪

[@full_metal2452]

Great work

[@stripermanly]

Watching the video I didn’t see where you mentioned what type of tubing did you use for the bunks. I’ve seen another video content where they used EMT. Can’t find that very cheap around here. Even the thin wall emt is around $40 for a 10’ section. Did you used standard steel(black pipe) on this build for your runners? In the process of converting my old seaark trailer into a monster multi kayak hauling machine

[@imadeit]

Excellent!!!!

[@joedoran4021]

It's beautiful... 😲😃

[@jonsmith4540]

What's your favorite river to fish out your way? I always liked the bend around Coal Center on the Mon when I was at Cal U.

[@randallgudmundson5988]

i just watched the video where you made the epoxy guitar. and i see youre into fishing. so im thinking what if you made an epoxy electric bass. with a bass(fish) in it ;)

[@molsonman100]

Where can I get a build sheet to.make this myself??? I love it

[@exicore]

Бомбезную штуку собрали) И да, ваши бы футболки в Россию) Думаю, своего покупателя точно бы нашли)

[@TimberRidgerenovation]

Awesome build!

[@dpmeyer4867]

cool

[@mikesgarage5066]

I love how there is zero mention of Jordan joining in on any fishing or getting a kayak lol.

[@jordanheider2662]

It’s lonely over here

[@JeremyMcconnell]

Nice work

[@ericscalise2992]

Root TIG all day!!!

[@elibaxter3646]

More metal work please!!!!!!

[@westernwolf1096]

i take it will be live on youtube?

[@jordanheider2662]

Yup!

[@westernwolf1096]

@@jordanheider2662 cool

[@imacrazyguy5831]

Oops! Need to flip the axle! The bow should be at the top :) Dang awesome build though! I need to get around to getting a trailer done for my own kayaks.

[@chriscampbell1456]

What did you have to do to get the trailer titled and registered in PA. I'm looking at buying a 4×8 "kit" trailer and have heard it'll be a nightmare to get titled here in PA. Some details would be great.

[@TheJinxii]

As someone from Switzerland, born and raised in the Netherlands till 26, I can’t fathom the fact that one can do this in the USA and just… drive it around…

[@dp01]

don't say it too loud or they will start prohibiting and regulating everything.

[@ChadHooverFishing]

That’s also how we feel. We can’t fathom or comprehend a place wheee the government controls so much of your life that you can’t make, build, create and just do stuff. The feeling is mutual.

[@jaredsargent5322]

When welding use bubble gum root with jb weld fill then cap it with duct tape. Works 60% of the time everytime.

[@william132]

You can't not love the colour they painted it

[@beeferbaron]

So awesome!!! I’m winning this one!! Hahaha good luck everybody

[@TraumaQueen65]

I wana see plates on this bad boy!

[@John_Malecki]

Dropped it off yesterday !

[@woodworksbygrampies1284]

@@John_Malecki Good luck! No sure about Pennsylvania but in California, even if you get everything right you have a 50/50 chance at best that it goes your way.

[@Wicked03GT]

Malecki! I like you even more now. Now since I invited Chad and he never showed up, i will invite you. get down here to Atlanta, I will take you down the Chattahoochee River for some epic Shoal bass fishing and possibly change your life forever. You can bring those other two guys as well if you want...

[@ChadHooverFishing]

Never ain’t over yet!! I’m still down to make it happen brother

[@c.a.g.1977]

1:03 Awww, I feel sorry for Jordan...

[@jordanheider2662]

I called dibs on the first rocket ship we get

[@IvanPerez-fs2pj]

Someone else realised the sun marks on John's arms? JAJAJAAJAJ probably for fishing. Good trailer

[@Great-white-tiger-hunter]

Good video!!!

[@bobbalkovec]

Looks awesome John...stay away from those Allegheny White Fish.

[@Rollinswjr]

Why not run the wiring on the inside of the square tube frame?

[@John_Malecki]

it was more work and makes it more difficult to replace haha

[@thompsonfamilyhuntingadven4036]

I had that exact same thought, it’s where my boat trailers wires are run.

[@danielreyes8370]

You guys can get away with the first idea (build) and riding the back of the truck here in Texas 🤣😎

[@gbscavenger3558]

We just not gonna talk about how sexy johns truck is?

[@rkrzyston]

no wheels for the kayak to roll on?

[@alexanderzsilco7506]

Nice tan lines, John ;-)

[@nicolaspardo9690]

What are you going to donif Jordan win the kayak??? Make an other trailer??? Greate built!! Also, if you are not living in the USA, you can win in the give away?

[@fdrifareal]

Does anyone know where I can find a video on how to refresh grease for the malone trailers?

[@williamwinder3466]

"Fabricobble" 😂👍🤝

[@jaredwilliams5252]

So any chance we can get a link to the same kayak as Sam’s? Been looking for an upgrade over my modified Costco tandem. Kinda fat and have a service dog so need a wide stable setup. Tired of running outriggers but can’t afford a hobie on a VA check lol.

[@jaredwilliams5252]

PS been losing weight since I restarted my woodworking hobby due to finding your videos.

[@John_Malecki]

here is sams bit.ly/JM_SamsKayak , and mine bit.ly/JM_Kayak (PS I am also chubby)

[@jaredwilliams5252]

Awesome thanks. Looking forward to more shenanigans.

[@austinstephenson9877]

What make/model was the kayak you put on the top of the trailer?

[@SamGreenMaker]

bonafide ss127

[@BandSWoodcraft]

why wouldn't you name the cnc plasma cutter Kermit? you already got a Miss Piggy...

[@jordanheider2662]

We may have a Kermit in the works…

[@davidurdahl6656]

One word... BBQ....