Cutty Sark - part 1 Making The Skeleton (phase 1)

In this video i start to make the skeleton. This is new for me, i have never seen a skeleton like this one. Because i have to let the glue dry in the main part, i am working on the rest of the pieces and prepare them for the wiring.This Video comes in 1080p.
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Advanced
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Expert
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Tools
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Big cutter amzn.to/3wzuyiF
Scalpel with tips amzn.to/3PwTlvb
Wire cutter amzn.to/3LzsXxu
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Sandpaper 60 degrees amzn.to/39DA0bg
Small Saw amzn.to/3NpZRSD
Soldering iron amzn.to/3lu6jMj
Small bowl amzn.to/3NoJSEk
Wood putty pine amzn.to/3MDrGH3
Colored paints set amzn.to/3LyLha7
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Pins amzn.to/3G3Yt5K
Springs set amzn.to/3NxPJHH
Pencils amzn.to/3wvkqrc
Small flat screwdriver amzn.to/3yPPkfr
Flat Pliers amzn.to/38I6q47
Small hammer amzn.to/3sNLsrF
Needle threaders amzn.to/3yVTaUx
Diamond files set amzn.to/3Luy029
Protection gloves amzn.to/3agcGAH
Ruler amzn.to/3sP5kKU
Blower amzn.to/3LxQ8Ir
Dremel pack amzn.to/3sNzFts
Cleaning brushes amzn.to/3NjfKu6
Paint brushes amzn.to/3wCWotf

[@The_Oldguy]

Here we go, a new year and a new ship. Looking forward to learning more this year. Thank you John for all the videos. - Mike

[@JohnsWoodenShips]

A new ship with a different skeleton, that's new even for me :)

[@WarrenFahyAuthor]

YAY! Another ship to add to the Victory that has taken pride of place in your collection of fantastic builds. Congratulations!

[@JohnsWoodenShips]

Yes another beauty for the collection!!! Thank you very much Warren!!!

[@jamesdennis2004]

Ok here we go a new ship I can't wait to see how this one goes. John I almost didn't watch this video but I can't stay away you make a great work of art all the time.

[@JohnsWoodenShips]

Thank you very much my friend!!!

[@corvus7776]

The Cutty Sark is my favorite ship. I am glad that you are making this wonderful ship. Good job John! Thanks! Greetings from Hungary!

[@JohnsWoodenShips]

Thank you very much!!! Stay tuned because she has the looks to be a very beautiful model :)

[@corvus7776]

@@JohnsWoodenShips I will follow the construction and I know the boat will be beautiful! You are the best shipbuilder for me! I admire your works! Thanks!

[@eduardosuarez4239]

John hermoso barco tu nuevo proyecto , felicidades...🇲🇽🇲🇽....

[@JohnsWoodenShips]

Thank you very much my friend!!!

[@Wizard010357]

Hi John. I'm jealous! :-) I built this kit back in the 1980s. Then, the skeleton parts were not laser printed but merely printed on the wood. I had to cut out every piece with a Jewler's saw. What a pain ! It does build into a nice model though. Good luck on the build ! I'll be watching with interest.

[@JohnsWoodenShips]

I believe she is going to be very good looking!

[@dariuszstocki2445]

welcome back. It's great that you're starting a new project. I will follow the construction. fingers crossed

[@JohnsWoodenShips]

If i stop there must be a problem my friend :)

[@AhmetAygit]

Good luck John..

[@JohnsWoodenShips]

Thank you very much my friend!!!

[@GregWilson635]

Nice start John. Will look forward to seeing another ship grow into a beauty :)

[@JohnsWoodenShips]

Thank you very much my friend!!! She is not going to be like Victory but she has the looks :)

[@nigeldouglas1529]

Wishing you all the best for the new build John, regards Nigel 😊

[@JohnsWoodenShips]

Thank you kindly my friend!!!

[@colinmontgomery1956]

John, this is going to be very exciting. I was aboard both Victory and Cutty Sark last month. You did justice to Nelson's Victory, and I have no doubt that your take on this great ship will also be incredible.

[@JohnsWoodenShips]

Thank you very much Colin!!! I wish i could be aboard my self some time in the future :)

[@TheNewSettlers]

Hi John. I visited this ship a year ago on a trip to London. I took an enormous amount of photos as I am also working on a wooden model. Am happy to share these photos with you if you would like? The photos give understanding of the true detail and composition.

[@JohnsWoodenShips]

Hi! I would love to have photos of the real one :) If you like you can send them to me through WeTransfer by using my email [e-mail] Thank you very much!!!

[@philsreef746]

@@JohnsWoodenShipssame goes for me John. I’m 30 mins away by train and often in Greenwich and more than happy to take some bespoke pictures for you. Although following the restoration after the fire a few years ago I’m not sure how authentic the ship now is.

[@scottyshipbuilder]

John, I finished my first wood ship, with your help for techniques, last August. It was a two-master, the Artesania Latina 1/50 Swift Virginia Pilot Boat 1805 purchased in 1984 for my Dad who never touched it. It came out great after 16 months. What should I build next? Not, I repeat NOT, the Victory. 😂

[@JohnsWoodenShips]

That's good news!!! Try La Candelaria. If you want to make it a bit harder you can go to Beagle. I have series for both of them :)

[@jameson6152]

Hey John, super excited to see this one. Obviously you won't need a new project for a while, but as a submariner I have to ask if you've ever considered doing a submarine model? I think your skill could do some really amazing things with metal weathering and detailing. Hope the year treats you well.

[@JohnsWoodenShips]

Hi James! To tell you the truth i was thinking of making sometime a WWII German submarine. The only thing that stops me is that they are made out of plastic. I don't know if there are wooden ones but the detail won't be the same. Happy New Year my friend!!!

[@normandlambert6385]

Bonjour John nouveau projet et assemblage semble différent à se qu’on est habitué donc on va apprendre de nouvelles techniques.Je vous souhaite une bonne année je vais suivre avec intérêt j’apprends toujours. Merci Normand 🇨🇦

[@JohnsWoodenShips]

Happy New Year Normand!!! Yes this one has a skeleton assembly that i have never seen before.

[@Beginne_ship_modeler]

Привет, поздравляю с началом постройки интересной модели. Удачи!

[@JohnsWoodenShips]

Thank you very much!!!

[@genojoe3176]

Ladies and gentlemen, please fasten your seatbelts and store your tabletops. It is time for another build by John. See you at the finish line!

[@simonsoegaard60]

Hello John this id the traditionel billing models and the support Will help, but for many years i used one i made My self out af a bookshelf, an rightangle and a couple of liste. (I do have one now) looking foreward to se your take on A classic billing kit. Best wishes Simon

[@JohnsWoodenShips]

After Victory my friend everything is much easier :)

[@simonsoegaard60]

@@JohnsWoodenShips absolutly, but i'm sure that you Will make something special out of this one also

[@jamesquick412]

Hello John and best wishes for 2024 being a better year than 2023 for us all. I remember you using an Arrowmax cordless pen sized drill/screwdriver. Do you still use it? What is your opinion of the tool?

[@JohnsWoodenShips]

Hi James! Happy new year! yes i still use it. It is not made for heavy duty jobs and the drill tips are not the best quality around. But it is very handy when you need to make a lot of small holes and with precision.

[@jamesquick412]

Thank you for the fast reply John!

[@notios7gr]

Χρονια πολλα Γιαννη και καλη χρονια.εχω ενα απο το 1969 περιπου,το ειχε φιαξει ο πατερας μου σε ενα μπαρκο.νομιζω ομως οτι ειναι φιαγμενο με σκελετο και πετσωμα.δεν γνωριζω τη μαρκα του κιτ.

[@JohnsWoodenShips]

Καλη Χρονια, Χρονια Πολλα με υγεια! Αυτο ειναι κειμηλιο!

[@buckchoppers2480]

I can see you rapidly losing the battle for space to put these models, John. 😊

[@JohnsWoodenShips]

Oh Yes my friend!!! I give away the old ones and i make friends happy!!!

[@gilbertmeldener5199]

Hi Nohn No stop after the beautiful Victory 😂 Who is the kit manufacturer for the Cutty Sark

[@JohnsWoodenShips]

Again Billing Boats my friend :)