Cutty Sark - part 2 Making The Skeleton (phase 2)

In this video i complete the skeleton build. It is not an easy task but since it was another way i had to give it the necessary attention. This Video comes in 1080p.
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Advanced
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Expert
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Tools
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Big cutter amzn.to/3wzuyiF
Scalpel with tips amzn.to/3PwTlvb
Wire cutter amzn.to/3LzsXxu
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Sandpaper 60 degrees amzn.to/39DA0bg
Small Saw amzn.to/3NpZRSD
Soldering iron amzn.to/3lu6jMj
Small bowl amzn.to/3NoJSEk
Wood putty pine amzn.to/3MDrGH3
Colored paints set amzn.to/3LyLha7
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Pins amzn.to/3G3Yt5K
Springs set amzn.to/3NxPJHH
Pencils amzn.to/3wvkqrc
Small flat screwdriver amzn.to/3yPPkfr
Flat Pliers amzn.to/38I6q47
Small hammer amzn.to/3sNLsrF
Needle threaders amzn.to/3yVTaUx
Diamond files set amzn.to/3Luy029
Protection gloves amzn.to/3agcGAH
Ruler amzn.to/3sP5kKU
Blower amzn.to/3LxQ8Ir
Dremel pack amzn.to/3sNzFts
Cleaning brushes amzn.to/3NjfKu6
Paint brushes amzn.to/3wCWotf

[@JAFKARNAT]

My favourite part of building model boats, the skeleton. Great video looking forward to seeing the next installment.

[@JohnsWoodenShips]

I am glad that you like it :) Thank you very much!!!

[@colinmontgomery1956]

You can already see the graceful hull form taking shape, here, John. It looks like a very sturdy hull, actually. A good beginning, and can't wait for the next chapter.

[@JohnsWoodenShips]

Indeed, i have never seen something like that before but it is pretty solid!

[@simonsoegaard60]

Hello John, a great start, and best advice is to let the glue dry before you take next step, I think that most mistakes Come from impatience, so great job as ever, Best wishes Simon

[@JohnsWoodenShips]

Hello my friend! Yes no need to rush things , patient is the best way to make it right!

[@GregWilson635]

Nice work. Very interesting skeleton

[@JohnsWoodenShips]

Indeed my friend, Thank you very much!!!

[@cajunrandy2143]

👍👍👍👍👍

[@AhmetAygit]

Never seen a construction like this one before, it is interesting but very open to mistakes..

[@JohnsWoodenShips]

Yes it's something different and i did made a mistake, you will see :)

[@nigeldouglas1529]

That was a challenging skeleton John, well navigated … regards Nigel 😊

[@JohnsWoodenShips]

Indeed my friend 😊 never made anyone like this before. Thank you very much!!!

[@The_Oldguy]

John, do you ever use a "square" for checking verticals? I noticed that you work with measurements a lot. So far so good. - Mike

[@JohnsWoodenShips]

No need my friend, the fitting it perfect so one axle is always 90 degrees, the other one is measured with the drawings.

[@TimTweddell]

Great video. Very interesting keel construction. Is the first type of keel you have built? Cannot wait til Saturday to see how the decks look. Say hi to Wolf and Buddy.😃

[@JohnsWoodenShips]

Thank you very much!!! Yes this is the 1st time i had to build the skeleton and the keel like this. I will , I will :)

[@jamesdennis2004]

You know it looks smalle. I was expecting it to be bigger. I'm guessing but by the way this looks it looks like it will take 10 months to finish it. But that is probably not the case.

[@JohnsWoodenShips]

It's going to be around 3 feet long, it's big enough. No i don't think it will take that long.

[@jamesdennis2004]

@@JohnsWoodenShips yeah I figured that I was just guessing around. Plus I'm not that good at guessing anyway so that accurate on my side.

[@ianbuckley9530]

I was expecting you to be using the build slip like you did for Victory. Great job though.

[@JohnsWoodenShips]

@@ianbuckley9530 I thought too but it's better to show how to do it without it. Thank you very much!!!

[@normandlambert6385]

Bonjour John un montage très différent BB a sa propre technique au début j’ai eu certaines réticences quand je fabrique mon Victory mais leur 10:32 pièces son belle et précise et on fini par apprécier.Ce matin en ouvrant votre vidéo j’ai eu une surprise il y avait une traduction en français est-ce que c’est vous qui ajouter ou c’est KZbin qui le fait en collaboration mais c’est très intéressant et apprécié si vous pouvez me renseigner merci.Normand 🇨🇦

[@JohnsWoodenShips]

Hi Normand! Thank you very much!!! I did some research about the subs. I found out that KZbin can add automatically some English subs that are generated by the speech in the video. To do that you have to have a million things right. So in one of my videos , this one, i found out that the requirements were right to have subs. The next were easy, i just had to translate them using a KZbin tool to other languages. The problem is to have the English subs in a video. Unfortunately i haven't found a way to do that in all of my videos.

[@normandlambert6385]

Merci John pour l’information croyez vous pouvoir mettre la traduction dans les vidéos du Victory se serait super?

[@JohnsWoodenShips]

@@normandlambert6385 like i said, KZbin chooses automatically were to add subs. Then and only then i can add other languages, so until there is a way (i haven't figure it out yet) to add subs in every video i cannot do what you want.

[@Krabban_]

Hi John, didn't you make a mistake when you put in bulkhead no 5. You said 291mm from stern, but as far as I could see, you measured from the bow.

[@JohnsWoodenShips]

I must have made a mistake because 2 masts were away for a couple of mm one and a few more the other, but it is very easy to make it right. You will see how in the next videos.

[@davidgodden6523]

Hi John. Where did you get your mini battery/rechargeable hand drill? I've checked your list but it's not included. Regards.

[@tedrobinson8617]

Looking for a source too

[@JohnsWoodenShips]

The brand is Arrowmax and i got it from Amazon US :)

[@davidgodden6523]

@@JohnsWoodenShips thank you.

[@tedrobinson8617]

Thank you. I'm still having a problem where KZbin unsubscribes me from your channel every day

[@JohnsWoodenShips]

@@tedrobinson8617 I have heard that from other people as well. I really do not know why that is happening.