Converting my horizontal metal cutting bandsaw to vertical

[@artisanmakes]

Really enjoyed this one Jonesey. Glad to see that you're getting a lot of use out of that 2 piece vise.

[@scottlawrence3918]

You might be able to add a vertical hacksaw to your workshop. 😂

[@joneseymakes]

Thanks man! I’m enjoying your videos. That press of yours is sweet!

[@andrewdolinskiatcarpathian]

“Within a gnats whisker” is definitely precise! 👌 As always such a brilliant and informative build. Thank you for sharing. 👏👏👍😎

[@joneseymakes]

Thanks for watching!

[@DragonsFireMetalWorx]

Great build...glad I found this video...been scratching my head for a bit trying to come up with a solution...including clamping some sort of rig into the vise ... this seems to be a lot sturdier than my plan lol

[@joneseymakes]

Glad to hear it! Good luck!

[@badjuju6563]

my bandsaw came like that but the "table" was a biy of bent 2mm mild steel. it was extremely noisy due to vibrations. I too put a plate top on 200x200x15mm as thats what I had

[@stevewilliams2498]

Did you find the machine very unstable ? I had to put outriggers onto the floor to prevent the lads in the workshop tipping it over when raising it to vertical. I assumed that was why the replacement machine i bought didn't have the facility as in this Nany State, we find ourselves living in, it was deemed too dangerous.

[@dariushmilani6760]

Great job Jonesey, If the plate was thick enough, you could have incorporated a T-slot. Wish you do more projects 👍🤞

[@joneseymakes]

Thanks! I was thinking of fitting a fence to it…

[@josilhus]

Good idea man. I will try to do it in my workshop . It will save me a good money :)

[@JacobAHull-nx6rx]

That's a nice plate! Boy I'd love a nice milling machine

[@joneseymakes]

Thanks!

[@Koptokaf]

Good stuff there, Jonesey :) Advice for future operations: When using the slitting saw, it's fairly dangerous to do climb cuts. The risk of a self reinforcing, cumulative deflection issues is very high. Always try to do conventional cuts with slitting saws :)

[@joneseymakes]

Great advice, thanks for that. I’ll bear it in mind next time I get the slitting saw out.

[@cooperised]

​@@joneseymakesIt's also recommended to take the full depth of cut in one bite with a slitting saw, too - otherwise you can end up with chips packing into the slot on subsequent cuts, which can bind the cutter. Taking a full depth cut requires some nerve and a solid setup but is actually much less risky.

[@joneseymakes]

@@cooperised I do normally do that, but my setup was not solid on this one so I did it in several passes

[@Tensquaremetreworkshop]

I have one of these types of saw. It came with the plate that you make here. As far as I am aware, it is a standard accessory. Question- why did you bother surfacing the steel plate? It is surely flat enough as it is, especially considering how close together the mounting screws are- and they are on a riser that is far from precise. In practice, all sawn edges are going to get machined anyway, so it matters not.

[@joneseymakes]

It wasn’t standard with my machine. I machined it just because I wanted to get it as square as possible. Probably overkill!

[@Tensquaremetreworkshop]

@@joneseymakes Suspect you just wanted to try out your new vice! 😏

[@joneseymakes]

@@Tensquaremetreworkshop Busted!!

[@DavidR8]

Nice work.

[@joneseymakes]

Thanks!

[@nobbysworkshop]

You could cut some rebates on the top edge of the vice hard jaws so you don't need to use parallels. Nice job on the band saw. Thanks for sharing. Cheers Nobby

[@joneseymakes]

Good idea Nobby, thanks for that.

[@Festivejelly]

I have one of those "portable" bands. Ive seen people make tables for those. Need to give that a go I think.

[@joneseymakes]

Go for it!

[@RaymondMcMahon-e1q]

Brill...😁

[@steve8039]

Jonesey, what's you opinion of that bandsaw. Looks like the Warco 5" Arm model? You're the first KZbinr I've seen with one. Most go for the slightly simpler 4 1/2" universal unit.

[@joneseymakes]

Yes that’s right, I really like it, no complaints. It’s a bit more sturdy than the smaller model.

[@secretsix6]

i did one of them the only concern i have is the amount of exposed blade one slip an your in take care

[@craigeaston5680]

Hi there great video I seen u have got a warco lathe I was wondering what milling machine u have got is am looking it getting a machine my sell

[@joneseymakes]

Hi, I have a Warco Super Major.

[@craigeaston5680]

@ hi I’ve ordered the SUPER MAJOR VARIO MILLING MACHINE what do u think off the machine have u any review videos on the machine

[@roniweiss6260]

Love your videos as always. Would it not be easier to simply switch blades on the wood bandsaw to a metal cutting one?

[@ADBBuild]

Wood bandsaws are generally lighter built, lower power and higher speed. Because of this, they don't work great for cutting metal.

[@joell439]

More 👍👍😎👍👍

[@joneseymakes]

Thanks!

[@jimmclaughlin9069]

Great video, I'm going to make the same for my bandsaw - One question, what blade make/tpi/speed are you using to get such a quick cut in the radius you cut in the demo at the end?

[@joneseymakes]

Ahhhh, admission here - that footage is sped up 4 times so it doesn’t cut that fast. It’s just the standard blade that came with the machine.

[@stevewilliams2498]

Do you find it very unstable ? I had to put outriggers onto the floor to prevent the lads in the workshop tipping it over when raising it to vertical. I assumed that was why the replacement machine I subsequently bought didn't have the facility as in this Nany State, we find ourselves living in, it was deemed too dangerous.

[@joneseymakes]

My machine is quite well balanced so I doing have that problem fortunately.

[@daveys]

3:04 - A couple of appropriately sized bolts into t-nuts in your t-slots with locking nuts could give you the adjustability on the height that you’re looking to get from your parallels. Not 100% sure that it needs to be micron perfect though, considering you’re bolting it to one of those horizontal bandsaws. I have one and it’s not exactly precision engineering!

[@joneseymakes]

Good idea, I hadn’t considered that. Thanks for sharing.

[@daveys]

@@joneseymakes - You’re welcome! Excellent videos BTW, love watching them.

[@robmurg]

Great project! I'm also intrigued by the oil damper you show, my 4 1/2" bandsaw lacks one of those - is yours a superior model or is that something you've added?

[@joneseymakes]

Thanks! I didn’t add the damper, it was fitted as standard.

[@scottydntno]

You should see if you can make it work it the horizontal position too, then all you have to do is deal with the pin.

[@joneseymakes]

Good idea, there isn’t the room though as the plate interferes with the vise in the horizontal position. It’s only two bolts so takes seconds to fit anyway.

[@patw999]

Don’t you have some 1-2-3 blocks?

[@joneseymakes]

I do. Didn’t think of that! Thanks for the suggestion.

[@xDrDeath78x]

Do what I do mate. Tell the mrs you got it in ebay for pennies. She will never know lol

[@joneseymakes]

Hahaha good strategy!

[@bbbnz50]

Cool

[@bheckel1]

easier to ask forgiveness than permission when procuring new machinery. However, when I bought the mill, the wife suddenly needed a new car. So the mill cost 36k$

[@bheckel1]

Thank you for the content. I get lonely when I am out in the shop. Thank you for keeping me company. I appreciate the high quality video and your skills far exceed those which I will ever have. It makes me reach for a higher level than that which I know I can do. I have made better parts just from your inspiration. Thank you!

[@joneseymakes]

Hahaha brilliant! Your 36k mill comment did make me laugh, and thanks so much for the kind words. It’s encouraging to know people are watching and enjoying the videos. More to come!

[@moskal-]

With this use of the saw, the canvas becomes unusable very quickly, which is why I refused such user. The plasma cutter copes well with such types of work.

[@joneseymakes]

I’d very much like a plasma cutter