Pioner Boats polyethynene rotational moulding

[@christiandelorde5887]

I really enjoyed that. Thank you for posting the video. Shouting out from Atlanta, Georgia. U.S.A.

[@phornthip1991]

I has these boats very often used. The first before 2010 was not so good in rough waters. Then the Factory modified the design and made it wider and longer. Now with this modifyed design, its a big difference, explicit in rough waters. We still have 3 of these boats of different ages, that we can compare. I love this newer Boat "Pioner Multi III". PS: HDPE can lasting up to 50 years depending on the ingredients of the Mould and how you use it, with almost zero maintenance.

[@davoruric2637]

Hello, I'm interested in whether the styrofoam is always filled with water or does it self-discharge

[@josephkane825]

Wonderful video! No music!

[@noell.capangpangan7645]

New friend, watching from Manila, Philippines

[@rotodynamicsinc.123]

Very informative video thanks.

[@briansales2957]

Great boat

[@eddiebono859]

Nice boat 👏

[@babboon5764]

Never seen these things before. You Tube algorythm chucked this video at me. Now I *definitely* want one.

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@HenauderTitzauf]

Great idea, up to a point. That point is, after building, a supposedly watertite hull, then go and drill a bunch of screw holes in it makes no sense to me. Maybe I overlooked a step or something, but, I wouldn’t want it with any holes drilled below the top of the transom. And I don’t like the front drop down gate, but, that is a terrific idea for scuba, swimmers, etc., for water climbing aboard.

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@ctibpo991]

The whole stern design is bad... must have been wanting to minimize plywood usage. Doesn't look like optimal for good energy transfer to these untrained eyes. Too bad as everything forward is really nice.

[@CrucesNomad1]

Been a long time since I seen any of this stuff in action.

[@fakesfraudsfools9649]

I did this for a company making kayaks and canoes. These guys have it made. They dont have someone breathing down their necks knit picking everything they do.

[@farhanfarhan6]

Awesome video.....liked..subscribed...and shared at whatsapp...7 stars from Melnourne

[@masbintang7974]

Great 👍

[@1FishinAddict]

Would definitely buy this to fish offshore

[@ulfedlund884]

- Like it .. its a lot think ... ahead .. like it !

[@racrx7]

Cool boat that probably works well in cooler climates. Leave it out in the sun in the Florida Keys would be a true test of structural integrity.

[@kaavest]

It,s UV stabilized so it take a good heat, but i dont know if in very hot climate.I have a 10 ft with a 9,8 but it,s here in Norway and colder.My last one lasted in 11 years, out whole year and never trouble with the boat.It got stolen so i no have a 10 dark line with the dark Tohatsu 2021 and boat 2020. If in hot climate i think the darkline can be a bit hot in the sun.

[@grinchyface]

How many people are out on those same keys with rotomolded Yeti coolers that hold up just fine?

[@racrx7]

@@grinchyface, I’ve never seen anyone fish out of a YETI cooler, you?

[@grinchyface]

@@racrx7 you implied the sun would deteriorate the plastic, I'm just giving you a source of empirical proof that isn't the case. There might be other concerns that are more valid, but the sun damaging the integrity of the boat probably isn't one of them

[@jimlofts5433]

@@kaavest would they take a vinyl wrap and or paint to protect the poly and extend life ??

[@deltreka]

what is the winch for?

[@Jorgos65]

to lift the bow ramp

[@Pushyhog]

Just a lil loctite dude, damn. Tell the boss ta get ya a cordless caulk gun.

[@rk2045]

More informative for roto molders.good video boat cosmetic appearance is good .

[@voxel3339]

mas pide mas .gracias por compartir este video

[@shaun7057]

I used to this kind of stuff just on a smaller scale

[@ramonereno1217]

How much cost or price .

[@rogerdodger5415]

Amazing! 👍👍

[@gatti5002]

cool design !

[@ericsurfsmo5808]

i haven't seen a poly boat with a perfectly flat bottom yet in my life, and they ride accordingly. durable, sure, i guess easy to produce once you have the equipment....but as far as performance is concerned, their brightest highlight is "floating"

[@zookster4701]

Yeah , You can go out and buy all the equipment to do the job and then make you molds or have them made , and you will have whatever shape you want ,or just buy what you want from those people.

[@bearlabrador2018]

That’s because large Roto moulded products are extremely hard to keep 100% flat by virtue of the material and process. It’s not injection moulding, the tolerances are wider and more difficult to control. I can’t speak for boats but I paddle some pretty nice moulded kayaks which are fantastic quality.

[@derechteBenderBaer]

Wha kind of glue is that? At min 5:37, i see, it is from "würth", but what stuff will glue on polyethylen?

[@jmowreader9555]

It's polyurethane, Würth 300 MI. That stuff will stick to anything. I've never worked with Würth, but I've used 3M 5200 and Sika products; they're incredible.

[@christiandelorde8497]

I like it. Could be bigger. But i like it.

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail]

[@kaguntingsvlogtv]

You are amazing people

[@bennetjayakumar5207]

Informative... to rotomoulders

[@ianwagner4186]

When they put the foam in the floor pockets and then a plastic top what is going to stop water and crab from getting in there

[@sverduijn1]

nothing, it will just get dirty and wet over time. I also don't understand why they put screws in the plastic to fit things.

[@tomthompson7400]

that front ramp needs a serious rethink though ,, needs to sink , have steps , and then self drain on closing , or at least that is the dive boat option , offer a flat one or an insert and a set of bungs for sheep shifting etc.

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@josecarlosdecordes6325]

Mold rotational or rock and roll building?

[@tihemel]

How much ? the price of this boat

[@Jorgos65]

The new model 5,3m starts at 12,900 euro incl. VAT

[@dieselscience]

@@Jorgos65 How much MINUS VAT if I buy it outside the EU?

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@xaaotamhai5733]

Sản phẩm này mua ở đâu

[@arturasstatkus8613]

👍👍👍👍👍

[@likbronangperahufiberglass]

Bagus sekali hasilnya

[@Mauriciomel1]

Price please?

[@Jorgos65]

it starts around 20k

[@marcusquinones2425]

How can I get a mold like that, I love to build them, love it

[@vincent7520]

The price of the mould is at least ten times the price of the boat !!!…

[@handoris6422]

we produced the mold, welcome to contact me via email: [e-mail]

[@VitruviunMan]

My company is making one of these molds. Only about $100k invested so far in a 17’ mold. Problem is finding a fabricator that is skilled enough to assemble and weld the various intricate shapes. And unlike a fiberglass mold you can make as many boats with this mold as you want!

[@squashcannon806]

How do you get the Yellow label on the boat?

[@vxphan2601]

Do they sell it in US?

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@Mauriciomel1]

Boat?

[@Jorgos65]

yes Pioner Multi

[@gateway8833]

Hay, I had this exact job when I was a kid

[@Vee_Mees]

i have it right now :D :D

[@sammyspaniel6054]

I had an idea similar to that using epoxy resin. I was trying to make hollow three dimensional shapes out of fiberglass without the need for joining pieces. I also wanted to coat a piece with resin without it dripping. I think I need pursue this one.

[@tungkiyufa9442]

in 3:37 what thing that u use for cut the parting line plastic? please aswer my question bcs i need that thing. Thx

[@MohammadAlJammal]

A deburring tool

[@malcolmcarter5541]

Looks like a leather knife

[@user-121F]

Can I buy it in Korea?

[@cartmanrlsusall]

I wonder if they build one off custom boats?I have an idea of a small sailing vessel,like a heavenly twins in recycled hdpe,bare hulls to be fitted out by the owner for about thousand U.S. dollars would be very affordable to a lot of people

[@MrSunrise-]

Your NRE on the molds will kill you unless you can sell a bunch - but if you can sell a bunch, you're off to the races.

[@williamlaudeman7157]

At 5.02 one guy walks under the suspended load; trusting dude!

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail]

[@andrewbrown6522]

Whelp. Just found my next boat. Lol

[@jaysparc]

Hey I have an idea, instead of a camera just panning around why not describe what we're looking at?

[@faniefaze]

Polystyrene flotation ?

[@metricstormtrooper]

@3.20, I love the third world safety gear, not even a paper dust mask.

[@bestamerica]

greggy weggy @3.20, I love the third world safety gear, not even a paper dust mask. ' hi G W... yeaa right on... worker must use a dust safety mask on the face while pour the powder plastic molding

[@TyphoonVstrom]

It's not dust you morons, it is granulated plastic. If you are going to pretend to know about safety, at least identify the material first...

[@meincotu]

Compared to Norway the USA is a third world country and losing ground.

[@mafzat]

@@TyphoonVstrom he is right all the dust materials are harmful but plastics are more harmful , same like dust of chemicals .

[@racrx7]

Norway is hardly a third world country lol

[@stacylangford8015]

Cool

[@johnparrish9215]

Can you imagine if we had of had that tech in 1940? You could have built 500 PT Boats in a month easy.

[@oldschooldiy3240]

We had plastic, the type available at the time was too brittle for this use....FYI commonly called "bakelite" used in electrical insulating, jewelry, furniture handles, and decoration....

[@kiwiwifi]

JFK was a PT Boat skipper during WW2. Shame to know that an American was responsible for his death.

[@ytrew9717]

2 questions: 1) why using LDPE and not HDPE (which seems much stronger)? 2) why sailing boat are not (or rarely?) made in polyethynene ? Polyethynene would be perfect since it's nearly indestructible, and super easy to repair (we can "weld" it). Is it linked to the cost of production? Or what else?

[@homefront3162]

Heavy, Ugly, too flexible

[@MrSunrise-]

2) I talked to a boat dealer about this. There are polyethylene systems that do a fine job in this application. They incorporate a blowing agent for the the inner layers and so they are cheap, light and stiff, and basically indestructible - the dealer complained about how hard they were to break apart for disposal; a chainsaw was the only thing they could use. However, people don't want light and indestructible, they want shiny white like fiberglass, and the one thing you can't do with PE is make it shiny white like fiberglass. People are stupid.

[@ytrew9717]

@@MrSunrise- indestructible + repairable + recyclable

[@ct1762]

@@MrSunrise- the issue is weight. offshore, a fiberglass boat will ride miles better than a plastic boat. take one out in 5' chop and get back to us.

[@TariqKhan-77]

You could say the same about almost every wooded boat, until you add some lead ballast its little more than a floating paperweight.

[@homdarotomoldplastic6571]

it good sharing

[@umarbawazir7763]

how much is it ,,,, how to order

[@rodolfoamadeo1765]

How much the cost $$$ ?

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@murzello]

Баки с надписью Volvo, сделанные в Норвегии - я еще могу понять. Но, что там делает DeLaval - компания которая производит автоматические доильные аппараты для коров ))

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@rizalaceh409]

wow best produc

[@tomchen4296]

Good

[@drunkenarabatastripclub7762]

I dont know man... Waters got to be cold in Norway I'd sure hate to be fishing when my Bigwheel sank

[@inmyopinion6836]

Foam doesn't sink .

[@likbronangperahufiberglass]

Keren ....

[@archieruadiel1550]

i Like to applied in this company i like the way of processing. Of cooking and demolding

[@johnmackey4639]

I like it but what about a hinges door on the side with a place to mount a winch for treasure hunting

[@hanlinhanlin1811]

Good luck with everything I

[@williamhogg7830]

I cant believe that you folks made this video and didn't have ANY SOUND ,, you know... someone explaining what you folks are doing !

[@MrSunrise-]

Words not necessary - show, don't tell.

[@OysterPir8]

I'm glad they didn't

[@janainaeleuterio]

Layt Bolt aza delta tem Registro bom andamento em moldes.... lanches estoura orsamentario queijo filme.... veleiros convers seycon de motores de proa popa... invertido...

[@donjohnson3279]

Are these for sale in the U.S. and if so where please !

[@Mad.Man.Marine]

Do yourself a favor and buy a real boat. These are junk and poorly made

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@moonkabetse1322]

this is good for economic diversification

[@rotomolding]

#R.K Radhakrishnan #Ken Zou can thev be bough in usa ? ??????? @Mo Onkabetse @Donald Lumbert

[@dunruden9720]

polyethynene??

[@vankuipland]

Just another one of those places that produce micro plastics that fill our oceans !!!

[@dgsrks102030]

Baaaaaaaaaaaaaaaaaaaaaaaad plastic ?

[@MrSunrise-]

Microplastics don't come from bulk material like this. Virtually all of the plastic that isn't lost fishing gear (which constitutes 40% of the total) comes from 7 rivers in Asia. The real problem microplastics are either tiny manufactured spheres (to alter the rheology of shampoos, soaps and cosmetics, and are now largely banned) or the disintegration of thin films from the aforementioned rivers. This product will stay in one piece until EOL, and then it will be recycled or buried. Try to learn something about a subject before shooting your mouth off.

[@stephenmicaiahchatima8601]

Aluminium And Fiber Glass Sheets Value Chain Inspection And Checkpoint.

[@robertbrewer2190]

along with all the tire wear throughout the entire world

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@gilbertc5558]

Is each completed unit water tested?

[@rotomolding]

#Mo Onkabetse Is each completed unit water tested? @Robert Unversaw

[@grancito2]

Yes they take a day off to go diving on each one, great job.

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE yacht, service boats, Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail] And Yes we can supply all over the world, please contact for photos...

[@tomchen4296]

good

[@JenkemJohannes69]

yes

[@superc4308]

You guys should wear a mask 😲

[@robertjanko6709]

its polyethylen, not PVC! So no health problems.

[@Beachnative42]

@@robertjanko6709 anything other than air going into your lungs is bad

[@robertjanko6709]

I love simple minds!

[@drtooth7505]

Super C Self appointed expert who has no idea 😂

[@MrSunrise-]

Why? Polyethylene is a high-temperature thermoplastic. All the gasses have been removed from the resin. There is literally nothing flashing out of the resin. The powder they fill the mold with has been ground to a consistent size and the fines removed (required to get the right flow characteristics in the mold) so you don't even have dust.

[@TUTON808]

класс !

[@Pushyhog]

Get the cordless caulking gun.

[@nikolai502]

Its from 2010

[@SaltyPirate71]

I quit playing with plastic boats when I about 8 years old.

[@jmrichsonsr]

United States Sales? United States Distributors?

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail]

[@robertunversaw]

Interesting

[@henrycole8705]

Aluminum boats are better in the same size range. probably cheaper, and do not stain

[@Jorgos65]

but they do dents!!!

[@rigger314]

wheres the sound

[@kiwiwifi]

Sea kayak

[@prabudass1806]

Job vaccancy sir

[@vitalnobrega6049]

Quanto custa um desses? E como faço pra obter um barco desses?

[@vincent7520]

Ultimately all this is going to end as particules in the bottom of the ocean then in our plates, in animal food, on glaciers and forests everywhere. Don' want to blame men working there and the technological feat … but there's gotta be a way. The more so that I'm sure those who have such abilities to create objects are also able to make more planet friendly objects …

[@MrSunrise-]

No, it isn't. When it reaches the end of it's life, it is pulled out, cut up and either recycled as plastic decking (yay!) or buried.

[@vincent7520]

How many artifacts that should have been pulled out and lie in the bottom of the sea? Ask the deep sea… Then again burying them is no solution either : this end up in the food chain. May I remind you that top of said chain is usually man, sometimes lion or shark?

[@eprofessio]

Zero PPE. I hope they have good insurance.

[@hakankalakar3719]

Kıng vıdeo thans

[@rotomolding]

#Ken Zou can thev be bough in usa ? ??????? @Mo Onkabetse

[@jadekayak01]

i feel so sorry for you guys. rotomolders-the lowest paid plastic workers. even recyclers get more

[@impactajuvenile]

Curious, how much do these boats costs?

[@donaldlumbert4827]

can thev be bough in usa ? ???????

[@willywillies7748]

Hi We can build PE boat as your request Please make a search from web site '' gelisliyat'' and you will see and also I would like to send you our new HDPE Fishing boats produce for Norway please do not hesitate to contact with us with email : [e-mail]

[@ddavfox]

Whaly boats better

[@superc4308]

That stuff cant be good for your lungs ✌

[@kcole7839]

wtf, where is the usual annoying beatbox crap?

[@carloko08]

price?

[@helenbatt4116]

Haven’t you blokes heard of occupational health, you’d be closed down in Aus.

[@robertjanko6709]

Pioner is a norwegian company. Do you really think, that that they dont care for their workers? They have more or less the highest labor safety standards in europe! The guys are working with PE not with PVC. Big difference!

[@robertjanko6709]

@@AEON. Thanks for the info! A swedish friend has a Pioner 13 and even after 20 years outside (with a tarp over) it looks like brand new. HDPE is also used for the Coleman canoes. Its almost unbreakable. So these boats last very much longer than a fiberglass boat, the production process is less harmfull for the environment and if you have a crack you can weld it on your own.

[@drtooth7505]

Helen Batt You’re an expert who knows nothing. You are totally wrong 🤮

[@awidesigns]

so basically a plastic boat. Good luck that thing making it more then 5 years in the Phoenix AZ heat. Ill stick with metal or fiberglass.

[@MrSunrise-]

With the right additive package, Phoenix is a cinch. (My wife designed additive packages). You'll need extra UV stabilizer and the normal amounts of anti-oxidants; stick with light colors or go without to make it more comfortable in the desert sun. Talk to Ingenia - they have offices in Houston.

[@maciejorzechowski6497]

too heavy boat...

[@Jorgos65]

5,3m ... 450 kgs . is normal weight for the size. goes beautifuly with only 50hp!!

[@createaccount974]

Do you use recycled material? NOPE. Only the finest for these boats.

[@RivaldoMacario]

Onu